sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.2 not setting count and/or reply_len properly
loop6: detected capacity change from 0 to 40
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5068 at lib/iov_iter.c:385 _copy_from_iter+0x2f1/0x1320
Modules linked in:
CPU: 0 PID: 5068 Comm: syz-executor.2 Tainted: G L 6.4.0-rc5-next-20230606 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:_copy_from_iter+0x2f1/0x1320
Code: b2 ff ff 89 c3 e9 1f ff ff ff e8 7a df 35 ff be 85 01 00 00 48 c7 c7 80 f6 9e 84 e8 a9 3a 5a ff e9 13 fe ff ff e8 5f df 35 ff <0f> 0b 45 31 f6 e9 67 ff ff ff e8 50 df 35 ff 31 ff 89 ee e8 87 da
RSP: 0018:ffff8880442ff608 EFLAGS: 00010206
RAX: 0000000000003910 RBX: 0000000000000000 RCX: ffffc900023f1000
RDX: 0000000000040000 RSI: ffffffff821629c1 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffff81811a75 R12: 0000000000001000
R13: ffffea000109de00 R14: 0000000000001000 R15: ffff8880442ff838
FS: 00007ff342e6e700(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0432b56ff8 CR3: 000000000e9c4000 CR4: 0000000000350ef0
Call Trace:
copy_page_from_iter+0xe3/0x180
blk_rq_map_user_iov+0xb39/0x16c0
blk_rq_map_user_io+0x1d1/0x200
sg_common_write.constprop.0+0xd8d/0x15f0
sg_write.part.0+0x698/0xac0
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5078 comm=syz-executor.2
sg_write+0x8d/0xe0
vfs_write+0x2b8/0xd40
ksys_write+0x12b/0x260
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7ff3458f8b19
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ff342e6e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007ff345a0bf60 RCX: 00007ff3458f8b19
RDX: 0000000000000125 RSI: 00000000200003c0 RDI: 0000000000000005
RBP: 00007ff345952f6d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffea1f75dff R14: 00007ff342e6e300 R15: 0000000000022000
irq event stamp: 6591
hardirqs last enabled at (6661): [] asm_sysvec_apic_timer_interrupt+0x1a/0x20
hardirqs last disabled at (6692): [] __up_console_sem+0x5d/0x80
softirqs last enabled at (6642): [] irq_exit_rcu+0x93/0xc0
softirqs last disabled at (6611): [] irq_exit_rcu+0x93/0xc0
---[ end trace 0000000000000000 ]---
audit: type=1400 audit(1686050559.833:14): avc: denied { read } for pid=5066 comm="syz-executor.2" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=perf_event permissive=1
sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.2 not setting count and/or reply_len properly
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5083 comm=syz-executor.2
syz-executor.6: attempt to access beyond end of device
loop6: rw=2049, sector=40, nr_sectors = 4 limit=40
Buffer I/O error on dev loop6, logical block 10, lost async page write
audit: type=1400 audit(1686050560.137:15): avc: denied { checkpoint_restore } for pid=5060 comm="syz-executor.0" capability=40 scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=capability2 permissive=1
loop6: detected capacity change from 0 to 40
sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.2 not setting count and/or reply_len properly
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5108 comm=syz-executor.2
syz-executor.6: attempt to access beyond end of device
loop6: rw=2049, sector=40, nr_sectors = 4 limit=40
Buffer I/O error on dev loop6, logical block 10, lost async page write
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5116 comm=syz-executor.7
sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.7 not setting count and/or reply_len properly
sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.2 not setting count and/or reply_len properly
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5129 comm=syz-executor.7
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5134 comm=syz-executor.2
audit: type=1326 audit(1686050561.491:16): auid=0 uid=0 gid=0 ses=4 subj=system_u:system_r:kernel_t:s0 pid=5161 comm="syz-executor.5" exe="/syz-executor.5" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f3798061b19 code=0x0
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sr 1:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sr0, logical block 0, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sr0, logical block 1, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sr0, logical block 2, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sr0, logical block 3, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sr0, logical block 4, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.7 not setting count and/or reply_len properly
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sr 1:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5167 comm=syz-executor.7
sg_write: data in/out 917468/251 bytes for SCSI command 0x0-- guessing data in;
program syz-executor.2 not setting count and/or reply_len properly
SELinux: unrecognized netlink message: protocol=0 nlmsg_type=61 sclass=netlink_route_socket pid=5172 comm=syz-executor.2
audit: type=1326 audit(1686050562.327:17): auid=0 uid=0 gid=0 ses=4 subj=system_u:system_r:kernel_t:s0 pid=5161 comm="syz-executor.5" exe="/syz-executor.5" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f3798061b19 code=0x0
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sr 1:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
buffer_io_error: 11 callbacks suppressed
Buffer I/O error on dev sr0, logical block 0, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 1, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 2, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 3, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 4, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 5, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 6, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 7, async page read
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sr 1:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 0, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
Buffer I/O error on dev sr0, logical block 1, async page read
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sr 1:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 unaligned transfer
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sr 1:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy
misc raw-gadget: fail, usb_gadget_register_driver returned -16
loop1: detected capacity change from 0 to 5392
UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy
misc raw-gadget: fail, usb_gadget_register_driver returned -16
syz_tun: entered promiscuous mode
audit: type=1400 audit(1686050567.651:18): avc: denied { create } for pid=5352 comm="syz-executor.0" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unconfined_execmem_exec_t:s0 tclass=udp_socket permissive=1
loop2: detected capacity change from 0 to 40
Process accounting resumed
syz_tun: left promiscuous mode
Process accounting resumed