1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 // SPDX-License-Identifier: GPL-2.0 /* * linux/fs/ext4/truncate.h * * Common inline functions needed for truncate support */ /* * Truncate blocks that were not used by write. We have to truncate the * pagecache as well so that corresponding buffers get properly unmapped. */ static inline void ext4_truncate_failed_write(struct inode *inode) { /* * We don't need to call ext4_break_layouts() because the blocks we * are truncating were never visible to userspace. */ down_write(&EXT4_I(inode)->i_mmap_sem); truncate_inode_pages(inode->i_mapping, inode->i_size); ext4_truncate(inode); up_write(&EXT4_I(inode)->i_mmap_sem); } /* * Work out how many blocks we need to proceed with the next chunk of a * truncate transaction. */ static inline unsigned long ext4_blocks_for_truncate(struct inode *inode) { ext4_lblk_t needed; needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); /* Give ourselves just enough room to cope with inodes in which * i_blocks is corrupt: we've seen disk corruptions in the past * which resulted in random data in an inode which looked enough * like a regular file for ext4 to try to delete it. Things * will go a bit crazy if that happens, but at least we should * try not to panic the whole kernel. */ if (needed < 2) needed = 2; /* But we need to bound the transaction so we don't overflow the * journal. */ if (needed > EXT4_MAX_TRANS_DATA) needed = EXT4_MAX_TRANS_DATA; return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; }
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_GENERIC_TERMIOS_H #define _ASM_GENERIC_TERMIOS_H #include <linux/uaccess.h> #include <uapi/asm-generic/termios.h> /* intr=^C quit=^\ erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 start=^Q stop=^S susp=^Z eol=\0 reprint=^R discard=^U werase=^W lnext=^V eol2=\0 */ #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" /* * Translate a "termio" structure into a "termios". Ugh. */ static inline int user_termio_to_kernel_termios(struct ktermios *termios, const struct termio __user *termio) { unsigned short tmp; if (get_user(tmp, &termio->c_iflag) < 0) goto fault; termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp; if (get_user(tmp, &termio->c_oflag) < 0) goto fault; termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp; if (get_user(tmp, &termio->c_cflag) < 0) goto fault; termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp; if (get_user(tmp, &termio->c_lflag) < 0) goto fault; termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp; if (get_user(termios->c_line, &termio->c_line) < 0) goto fault; if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0) goto fault; return 0; fault: return -EFAULT; } /* * Translate a "termios" structure into a "termio". Ugh. */ static inline int kernel_termios_to_user_termio(struct termio __user *termio, struct ktermios *termios) { if (put_user(termios->c_iflag, &termio->c_iflag) < 0 || put_user(termios->c_oflag, &termio->c_oflag) < 0 || put_user(termios->c_cflag, &termio->c_cflag) < 0 || put_user(termios->c_lflag, &termio->c_lflag) < 0 || put_user(termios->c_line, &termio->c_line) < 0 || copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0) return -EFAULT; return 0; } #ifdef TCGETS2 static inline int user_termios_to_kernel_termios(struct ktermios *k, struct termios2 __user *u) { return copy_from_user(k, u, sizeof(struct termios2)); } static inline int kernel_termios_to_user_termios(struct termios2 __user *u, struct ktermios *k) { return copy_to_user(u, k, sizeof(struct termios2)); } static inline int user_termios_to_kernel_termios_1(struct ktermios *k, struct termios __user *u) { return copy_from_user(k, u, sizeof(struct termios)); } static inline int kernel_termios_to_user_termios_1(struct termios __user *u, struct ktermios *k) { return copy_to_user(u, k, sizeof(struct termios)); } #else /* TCGETS2 */ static inline int user_termios_to_kernel_termios(struct ktermios *k, struct termios __user *u) { return copy_from_user(k, u, sizeof(struct termios)); } static inline int kernel_termios_to_user_termios(struct termios __user *u, struct ktermios *k) { return copy_to_user(u, k, sizeof(struct termios)); } #endif /* TCGETS2 */ #endif /* _ASM_GENERIC_TERMIOS_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __NET_RTNETLINK_H #define __NET_RTNETLINK_H #include <linux/rtnetlink.h> #include <net/netlink.h> typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, struct netlink_ext_ack *); typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *); enum rtnl_link_flags { RTNL_FLAG_DOIT_UNLOCKED = 1, }; void rtnl_register(int protocol, int msgtype, rtnl_doit_func, rtnl_dumpit_func, unsigned int flags); int rtnl_register_module(struct module *owner, int protocol, int msgtype, rtnl_doit_func, rtnl_dumpit_func, unsigned int flags); int rtnl_unregister(int protocol, int msgtype); void rtnl_unregister_all(int protocol); static inline int rtnl_msg_family(const struct nlmsghdr *nlh) { if (nlmsg_len(nlh) >= sizeof(struct rtgenmsg)) return ((struct rtgenmsg *) nlmsg_data(nlh))->rtgen_family; else return AF_UNSPEC; } /** * struct rtnl_link_ops - rtnetlink link operations * * @list: Used internally * @kind: Identifier * @netns_refund: Physical device, move to init_net on netns exit * @maxtype: Highest device specific netlink attribute number * @policy: Netlink policy for device specific attribute validation * @validate: Optional validation function for netlink/changelink parameters * @priv_size: sizeof net_device private space * @setup: net_device setup function * @newlink: Function for configuring and registering a new device * @changelink: Function for changing parameters of an existing device * @dellink: Function to remove a device * @get_size: Function to calculate required room for dumping device * specific netlink attributes * @fill_info: Function to dump device specific netlink attributes * @get_xstats_size: Function to calculate required room for dumping device * specific statistics * @fill_xstats: Function to dump device specific statistics * @get_num_tx_queues: Function to determine number of transmit queues * to create when creating a new device. * @get_num_rx_queues: Function to determine number of receive queues * to create when creating a new device. * @get_link_net: Function to get the i/o netns of the device * @get_linkxstats_size: Function to calculate the required room for * dumping device-specific extended link stats * @fill_linkxstats: Function to dump device-specific extended link stats */ struct rtnl_link_ops { struct list_head list; const char *kind; size_t priv_size; void (*setup)(struct net_device *dev); bool netns_refund; unsigned int maxtype; const struct nla_policy *policy; int (*validate)(struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); int (*newlink)(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); int (*changelink)(struct net_device *dev, struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); void (*dellink)(struct net_device *dev, struct list_head *head); size_t (*get_size)(const struct net_device *dev); int (*fill_info)(struct sk_buff *skb, const struct net_device *dev); size_t (*get_xstats_size)(const struct net_device *dev); int (*fill_xstats)(struct sk_buff *skb, const struct net_device *dev); unsigned int (*get_num_tx_queues)(void); unsigned int (*get_num_rx_queues)(void); unsigned int slave_maxtype; const struct nla_policy *slave_policy; int (*slave_changelink)(struct net_device *dev, struct net_device *slave_dev, struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); size_t (*get_slave_size)(const struct net_device *dev, const struct net_device *slave_dev); int (*fill_slave_info)(struct sk_buff *skb, const struct net_device *dev, const struct net_device *slave_dev); struct net *(*get_link_net)(const struct net_device *dev); size_t (*get_linkxstats_size)(const struct net_device *dev, int attr); int (*fill_linkxstats)(struct sk_buff *skb, const struct net_device *dev, int *prividx, int attr); }; int __rtnl_link_register(struct rtnl_link_ops *ops); void __rtnl_link_unregister(struct rtnl_link_ops *ops); int rtnl_link_register(struct rtnl_link_ops *ops); void rtnl_link_unregister(struct rtnl_link_ops *ops); /** * struct rtnl_af_ops - rtnetlink address family operations * * @list: Used internally * @family: Address family * @fill_link_af: Function to fill IFLA_AF_SPEC with address family * specific netlink attributes. * @get_link_af_size: Function to calculate size of address family specific * netlink attributes. * @validate_link_af: Validate a IFLA_AF_SPEC attribute, must check attr * for invalid configuration settings. * @set_link_af: Function to parse a IFLA_AF_SPEC attribute and modify * net_device accordingly. */ struct rtnl_af_ops { struct list_head list; int family; int (*fill_link_af)(struct sk_buff *skb, const struct net_device *dev, u32 ext_filter_mask); size_t (*get_link_af_size)(const struct net_device *dev, u32 ext_filter_mask); int (*validate_link_af)(const struct net_device *dev, const struct nlattr *attr); int (*set_link_af)(struct net_device *dev, const struct nlattr *attr); int (*fill_stats_af)(struct sk_buff *skb, const struct net_device *dev); size_t (*get_stats_af_size)(const struct net_device *dev); }; void rtnl_af_register(struct rtnl_af_ops *ops); void rtnl_af_unregister(struct rtnl_af_ops *ops); struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]); struct net_device *rtnl_create_link(struct net *net, const char *ifname, unsigned char name_assign_type, const struct rtnl_link_ops *ops, struct nlattr *tb[], struct netlink_ext_ack *extack); int rtnl_delete_link(struct net_device *dev); int rtnl_configure_link(struct net_device *dev, const struct ifinfomsg *ifm); int rtnl_nla_parse_ifla(struct nlattr **tb, const struct nlattr *head, int len, struct netlink_ext_ack *exterr); struct net *rtnl_get_net_ns_capable(struct sock *sk, int netnsid); #define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind) #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 /* SPDX-License-Identifier: GPL-2.0-only */ /* * net busy poll support * Copyright(c) 2013 Intel Corporation. * * Author: Eliezer Tamir * * Contact Information: * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> */ #ifndef _LINUX_NET_BUSY_POLL_H #define _LINUX_NET_BUSY_POLL_H #include <linux/netdevice.h> #include <linux/sched/clock.h> #include <linux/sched/signal.h> #include <net/ip.h> /* 0 - Reserved to indicate value not set * 1..NR_CPUS - Reserved for sender_cpu * NR_CPUS+1..~0 - Region available for NAPI IDs */ #define MIN_NAPI_ID ((unsigned int)(NR_CPUS + 1)) #ifdef CONFIG_NET_RX_BUSY_POLL struct napi_struct; extern unsigned int sysctl_net_busy_read __read_mostly; extern unsigned int sysctl_net_busy_poll __read_mostly; static inline bool net_busy_loop_on(void) { return sysctl_net_busy_poll; } static inline bool sk_can_busy_loop(const struct sock *sk) { return READ_ONCE(sk->sk_ll_usec) && !signal_pending(current); } bool sk_busy_loop_end(void *p, unsigned long start_time); void napi_busy_loop(unsigned int napi_id, bool (*loop_end)(void *, unsigned long), void *loop_end_arg); #else /* CONFIG_NET_RX_BUSY_POLL */ static inline unsigned long net_busy_loop_on(void) { return 0; } static inline bool sk_can_busy_loop(struct sock *sk) { return false; } #endif /* CONFIG_NET_RX_BUSY_POLL */ static inline unsigned long busy_loop_current_time(void) { #ifdef CONFIG_NET_RX_BUSY_POLL return (unsigned long)(local_clock() >> 10); #else return 0; #endif } /* in poll/select we use the global sysctl_net_ll_poll value */ static inline bool busy_loop_timeout(unsigned long start_time) { #ifdef CONFIG_NET_RX_BUSY_POLL unsigned long bp_usec = READ_ONCE(sysctl_net_busy_poll); if (bp_usec) { unsigned long end_time = start_time + bp_usec; unsigned long now = busy_loop_current_time(); return time_after(now, end_time); } #endif return true; } static inline bool sk_busy_loop_timeout(struct sock *sk, unsigned long start_time) { #ifdef CONFIG_NET_RX_BUSY_POLL unsigned long bp_usec = READ_ONCE(sk->sk_ll_usec); if (bp_usec) { unsigned long end_time = start_time + bp_usec; unsigned long now = busy_loop_current_time(); return time_after(now, end_time); } #endif return true; } static inline void sk_busy_loop(struct sock *sk, int nonblock) { #ifdef CONFIG_NET_RX_BUSY_POLL unsigned int napi_id = READ_ONCE(sk->sk_napi_id); if (napi_id >= MIN_NAPI_ID) napi_busy_loop(napi_id, nonblock ? NULL : sk_busy_loop_end, sk); #endif } /* used in the NIC receive handler to mark the skb */ static inline void skb_mark_napi_id(struct sk_buff *skb, struct napi_struct *napi) { #ifdef CONFIG_NET_RX_BUSY_POLL /* If the skb was already marked with a valid NAPI ID, avoid overwriting * it. */ if (skb->napi_id < MIN_NAPI_ID) skb->napi_id = napi->napi_id; #endif } /* used in the protocol hanlder to propagate the napi_id to the socket */ static inline void sk_mark_napi_id(struct sock *sk, const struct sk_buff *skb) { #ifdef CONFIG_NET_RX_BUSY_POLL WRITE_ONCE(sk->sk_napi_id, skb->napi_id); #endif sk_rx_queue_set(sk, skb); } /* variant used for unconnected sockets */ static inline void sk_mark_napi_id_once(struct sock *sk, const struct sk_buff *skb) { #ifdef CONFIG_NET_RX_BUSY_POLL if (!READ_ONCE(sk->sk_napi_id)) WRITE_ONCE(sk->sk_napi_id, skb->napi_id); #endif } #endif /* _LINUX_NET_BUSY_POLL_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_TIME64_H #define _LINUX_TIME64_H #include <linux/math64.h> #include <vdso/time64.h> typedef __s64 time64_t; typedef __u64 timeu64_t; #include <uapi/linux/time.h> struct timespec64 { time64_t tv_sec; /* seconds */ long tv_nsec; /* nanoseconds */ }; struct itimerspec64 { struct timespec64 it_interval; struct timespec64 it_value; }; /* Located here for timespec[64]_valid_strict */ #define TIME64_MAX ((s64)~((u64)1 << 63)) #define TIME64_MIN (-TIME64_MAX - 1) #define KTIME_MAX ((s64)~((u64)1 << 63)) #define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) /* * Limits for settimeofday(): * * To prevent setting the time close to the wraparound point time setting * is limited so a reasonable uptime can be accomodated. Uptime of 30 years * should be really sufficient, which means the cutoff is 2232. At that * point the cutoff is just a small part of the larger problem. */ #define TIME_UPTIME_SEC_MAX (30LL * 365 * 24 *3600) #define TIME_SETTOD_SEC_MAX (KTIME_SEC_MAX - TIME_UPTIME_SEC_MAX) static inline int timespec64_equal(const struct timespec64 *a, const struct timespec64 *b) { return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec); } /* * lhs < rhs: return <0 * lhs == rhs: return 0 * lhs > rhs: return >0 */ static inline int timespec64_compare(const struct timespec64 *lhs, const struct timespec64 *rhs) { if (lhs->tv_sec < rhs->tv_sec) return -1; if (lhs->tv_sec > rhs->tv_sec) return 1; return lhs->tv_nsec - rhs->tv_nsec; } extern void set_normalized_timespec64(struct timespec64 *ts, time64_t sec, s64 nsec); static inline struct timespec64 timespec64_add(struct timespec64 lhs, struct timespec64 rhs) { struct timespec64 ts_delta; set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec, lhs.tv_nsec + rhs.tv_nsec); return ts_delta; } /* * sub = lhs - rhs, in normalized form */ static inline struct timespec64 timespec64_sub(struct timespec64 lhs, struct timespec64 rhs) { struct timespec64 ts_delta; set_normalized_timespec64(&ts_delta, lhs.tv_sec - rhs.tv_sec, lhs.tv_nsec - rhs.tv_nsec); return ts_delta; } /* * Returns true if the timespec64 is norm, false if denorm: */ static inline bool timespec64_valid(const struct timespec64 *ts) { /* Dates before 1970 are bogus */ if (ts->tv_sec < 0) return false; /* Can't have more nanoseconds then a second */ if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return false; return true; } static inline bool timespec64_valid_strict(const struct timespec64 *ts) { if (!timespec64_valid(ts)) return false; /* Disallow values that could overflow ktime_t */ if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) return false; return true; } static inline bool timespec64_valid_settod(const struct timespec64 *ts) { if (!timespec64_valid(ts)) return false; /* Disallow values which cause overflow issues vs. CLOCK_REALTIME */ if ((unsigned long long)ts->tv_sec >= TIME_SETTOD_SEC_MAX) return false; return true; } /** * timespec64_to_ns - Convert timespec64 to nanoseconds * @ts: pointer to the timespec64 variable to be converted * * Returns the scalar nanosecond representation of the timespec64 * parameter. */ static inline s64 timespec64_to_ns(const struct timespec64 *ts) { /* Prevent multiplication overflow */ if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) return KTIME_MAX; return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec; } /** * ns_to_timespec64 - Convert nanoseconds to timespec64 * @nsec: the nanoseconds value to be converted * * Returns the timespec64 representation of the nsec parameter. */ extern struct timespec64 ns_to_timespec64(const s64 nsec); /** * timespec64_add_ns - Adds nanoseconds to a timespec64 * @a: pointer to timespec64 to be incremented * @ns: unsigned nanoseconds value to be added * * This must always be inlined because its used from the x86-64 vdso, * which cannot call other kernel functions. */ static __always_inline void timespec64_add_ns(struct timespec64 *a, u64 ns) { a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } /* * timespec64_add_safe assumes both values are positive and checks for * overflow. It will return TIME64_MAX in case of overflow. */ extern struct timespec64 timespec64_add_safe(const struct timespec64 lhs, const struct timespec64 rhs); #endif /* _LINUX_TIME64_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 /* SPDX-License-Identifier: GPL-2.0 */ /* linux/net/inet/arp.h */ #ifndef _ARP_H #define _ARP_H #include <linux/if_arp.h> #include <linux/hash.h> #include <net/neighbour.h> extern struct neigh_table arp_tbl; static inline u32 arp_hashfn(const void *pkey, const struct net_device *dev, u32 *hash_rnd) { u32 key = *(const u32 *)pkey; u32 val = key ^ hash32_ptr(dev); return val * hash_rnd[0]; } #ifdef CONFIG_INET static inline struct neighbour *__ipv4_neigh_lookup_noref(struct net_device *dev, u32 key) { if (dev->flags & (IFF_LOOPBACK | IFF_POINTOPOINT)) key = INADDR_ANY; return ___neigh_lookup_noref(&arp_tbl, neigh_key_eq32, arp_hashfn, &key, dev); } #else static inline struct neighbour *__ipv4_neigh_lookup_noref(struct net_device *dev, u32 key) { return NULL; } #endif static inline struct neighbour *__ipv4_neigh_lookup(struct net_device *dev, u32 key) { struct neighbour *n; rcu_read_lock_bh(); n = __ipv4_neigh_lookup_noref(dev, key); if (n && !refcount_inc_not_zero(&n->refcnt)) n = NULL; rcu_read_unlock_bh(); return n; } static inline void __ipv4_confirm_neigh(struct net_device *dev, u32 key) { struct neighbour *n; rcu_read_lock_bh(); n = __ipv4_neigh_lookup_noref(dev, key); if (n) { unsigned long now = jiffies; /* avoid dirtying neighbour */ if (READ_ONCE(n->confirmed) != now) WRITE_ONCE(n->confirmed, now); } rcu_read_unlock_bh(); } void arp_init(void); int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg); void arp_send(int type, int ptype, __be32 dest_ip, struct net_device *dev, __be32 src_ip, const unsigned char *dest_hw, const unsigned char *src_hw, const unsigned char *th); int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir); void arp_ifdown(struct net_device *dev); struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, struct net_device *dev, __be32 src_ip, const unsigned char *dest_hw, const unsigned char *src_hw, const unsigned char *target_hw); void arp_xmit(struct sk_buff *skb); #endif /* _ARP_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 #ifndef INTERNAL_IO_WQ_H #define INTERNAL_IO_WQ_H #include <linux/io_uring.h> struct io_wq; enum { IO_WQ_WORK_CANCEL = 1, IO_WQ_WORK_HASHED = 2, IO_WQ_WORK_UNBOUND = 4, IO_WQ_WORK_NO_CANCEL = 8, IO_WQ_WORK_CONCURRENT = 16, IO_WQ_WORK_FILES = 32, IO_WQ_WORK_FS = 64, IO_WQ_WORK_MM = 128, IO_WQ_WORK_CREDS = 256, IO_WQ_WORK_BLKCG = 512, IO_WQ_WORK_FSIZE = 1024, IO_WQ_HASH_SHIFT = 24, /* upper 8 bits are used for hash key */ }; enum io_wq_cancel { IO_WQ_CANCEL_OK, /* cancelled before started */ IO_WQ_CANCEL_RUNNING, /* found, running, and attempted cancelled */ IO_WQ_CANCEL_NOTFOUND, /* work not found */ }; struct io_wq_work_node { struct io_wq_work_node *next; }; struct io_wq_work_list { struct io_wq_work_node *first; struct io_wq_work_node *last; }; static inline void wq_list_add_after(struct io_wq_work_node *node, struct io_wq_work_node *pos, struct io_wq_work_list *list) { struct io_wq_work_node *next = pos->next; pos->next = node; node->next = next; if (!next) list->last = node; } static inline void wq_list_add_tail(struct io_wq_work_node *node, struct io_wq_work_list *list) { if (!list->first) { list->last = node; WRITE_ONCE(list->first, node); } else { list->last->next = node; list->last = node; } node->next = NULL; } static inline void wq_list_cut(struct io_wq_work_list *list, struct io_wq_work_node *last, struct io_wq_work_node *prev) { /* first in the list, if prev==NULL */ if (!prev) WRITE_ONCE(list->first, last->next); else prev->next = last->next; if (last == list->last) list->last = prev; last->next = NULL; } static inline void wq_list_del(struct io_wq_work_list *list, struct io_wq_work_node *node, struct io_wq_work_node *prev) { wq_list_cut(list, node, prev); } #define wq_list_for_each(pos, prv, head) \ for (pos = (head)->first, prv = NULL; pos; prv = pos, pos = (pos)->next) #define wq_list_empty(list) (READ_ONCE((list)->first) == NULL) #define INIT_WQ_LIST(list) do { \ (list)->first = NULL; \ (list)->last = NULL; \ } while (0) struct io_wq_work { struct io_wq_work_node list; struct io_identity *identity; unsigned flags; }; static inline struct io_wq_work *wq_next_work(struct io_wq_work *work) { if (!work->list.next) return NULL; return container_of(work->list.next, struct io_wq_work, list); } typedef void (free_work_fn)(struct io_wq_work *); typedef struct io_wq_work *(io_wq_work_fn)(struct io_wq_work *); struct io_wq_data { struct user_struct *user; io_wq_work_fn *do_work; free_work_fn *free_work; }; struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data); bool io_wq_get(struct io_wq *wq, struct io_wq_data *data); void io_wq_destroy(struct io_wq *wq); void io_wq_enqueue(struct io_wq *wq, struct io_wq_work *work); void io_wq_hash_work(struct io_wq_work *work, void *val); static inline bool io_wq_is_hashed(struct io_wq_work *work) { return work->flags & IO_WQ_WORK_HASHED; } void io_wq_cancel_all(struct io_wq *wq); typedef bool (work_cancel_fn)(struct io_wq_work *, void *); enum io_wq_cancel io_wq_cancel_cb(struct io_wq *wq, work_cancel_fn *cancel, void *data, bool cancel_all); struct task_struct *io_wq_get_task(struct io_wq *wq); #if defined(CONFIG_IO_WQ) extern void io_wq_worker_sleeping(struct task_struct *); extern void io_wq_worker_running(struct task_struct *); #else static inline void io_wq_worker_sleeping(struct task_struct *tsk) { } static inline void io_wq_worker_running(struct task_struct *tsk) { } #endif static inline bool io_wq_current_is_worker(void) { return in_task() && (current->flags & PF_IO_WORKER); } #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 // SPDX-License-Identifier: GPL-2.0 /* * device.h - generic, centralized driver model * * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org> * Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de> * Copyright (c) 2008-2009 Novell Inc. * * See Documentation/driver-api/driver-model/ for more information. */ #ifndef _DEVICE_H_ #define _DEVICE_H_ #include <linux/dev_printk.h> #include <linux/energy_model.h> #include <linux/ioport.h> #include <linux/kobject.h> #include <linux/klist.h> #include <linux/list.h> #include <linux/lockdep.h> #include <linux/compiler.h> #include <linux/types.h> #include <linux/mutex.h> #include <linux/pm.h> #include <linux/atomic.h> #include <linux/uidgid.h> #include <linux/gfp.h> #include <linux/overflow.h> #include <linux/device/bus.h> #include <linux/device/class.h> #include <linux/device/driver.h> #include <asm/device.h> struct device; struct device_private; struct device_driver; struct driver_private; struct module; struct class; struct subsys_private; struct device_node; struct fwnode_handle; struct iommu_ops; struct iommu_group; struct dev_pin_info; struct dev_iommu; /** * struct subsys_interface - interfaces to device functions * @name: name of the device function * @subsys: subsytem of the devices to attach to * @node: the list of functions registered at the subsystem * @add_dev: device hookup to device function handler * @remove_dev: device hookup to device function handler * * Simple interfaces attached to a subsystem. Multiple interfaces can * attach to a subsystem and its devices. Unlike drivers, they do not * exclusively claim or control devices. Interfaces usually represent * a specific functionality of a subsystem/class of devices. */ struct subsys_interface { const char *name; struct bus_type *subsys; struct list_head node; int (*add_dev)(struct device *dev, struct subsys_interface *sif); void (*remove_dev)(struct device *dev, struct subsys_interface *sif); }; int subsys_interface_register(struct subsys_interface *sif); void subsys_interface_unregister(struct subsys_interface *sif); int subsys_system_register(struct bus_type *subsys, const struct attribute_group **groups); int subsys_virtual_register(struct bus_type *subsys, const struct attribute_group **groups); /* * The type of device, "struct device" is embedded in. A class * or bus can contain devices of different types * like "partitions" and "disks", "mouse" and "event". * This identifies the device type and carries type-specific * information, equivalent to the kobj_type of a kobject. * If "name" is specified, the uevent will contain it in * the DEVTYPE variable. */ struct device_type { const char *name; const struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); char *(*devnode)(struct device *dev, umode_t *mode, kuid_t *uid, kgid_t *gid); void (*release)(struct device *dev); const struct dev_pm_ops *pm; }; /* interface for exporting device attributes */ struct device_attribute { struct attribute attr; ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf); ssize_t (*store)(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); }; struct dev_ext_attribute { struct device_attribute attr; void *var; }; ssize_t device_show_ulong(struct device *dev, struct device_attribute *attr, char *buf); ssize_t device_store_ulong(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); ssize_t device_show_int(struct device *dev, struct device_attribute *attr, char *buf); ssize_t device_store_int(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); ssize_t device_show_bool(struct device *dev, struct device_attribute *attr, char *buf); ssize_t device_store_bool(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); #define DEVICE_ATTR(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) #define DEVICE_ATTR_PREALLOC(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = \ __ATTR_PREALLOC(_name, _mode, _show, _store) #define DEVICE_ATTR_RW(_name) \ struct device_attribute dev_attr_##_name = __ATTR_RW(_name) #define DEVICE_ATTR_ADMIN_RW(_name) \ struct device_attribute dev_attr_##_name = __ATTR_RW_MODE(_name, 0600) #define DEVICE_ATTR_RO(_name) \ struct device_attribute dev_attr_##_name = __ATTR_RO(_name) #define DEVICE_ATTR_ADMIN_RO(_name) \ struct device_attribute dev_attr_##_name = __ATTR_RO_MODE(_name, 0400) #define DEVICE_ATTR_WO(_name) \ struct device_attribute dev_attr_##_name = __ATTR_WO(_name) #define DEVICE_ULONG_ATTR(_name, _mode, _var) \ struct dev_ext_attribute dev_attr_##_name = \ { __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) } #define DEVICE_INT_ATTR(_name, _mode, _var) \ struct dev_ext_attribute dev_attr_##_name = \ { __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) } #define DEVICE_BOOL_ATTR(_name, _mode, _var) \ struct dev_ext_attribute dev_attr_##_name = \ { __ATTR(_name, _mode, device_show_bool, device_store_bool), &(_var) } #define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = \ __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) int device_create_file(struct device *device, const struct device_attribute *entry); void device_remove_file(struct device *dev, const struct device_attribute *attr); bool device_remove_file_self(struct device *dev, const struct device_attribute *attr); int __must_check device_create_bin_file(struct device *dev, const struct bin_attribute *attr); void device_remove_bin_file(struct device *dev, const struct bin_attribute *attr); /* device resource management */ typedef void (*dr_release_t)(struct device *dev, void *res); typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data); #ifdef CONFIG_DEBUG_DEVRES void *__devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp, int nid, const char *name) __malloc; #define devres_alloc(release, size, gfp) \ __devres_alloc_node(release, size, gfp, NUMA_NO_NODE, #release) #define devres_alloc_node(release, size, gfp, nid) \ __devres_alloc_node(release, size, gfp, nid, #release) #else void *devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp, int nid) __malloc; static inline void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp) { return devres_alloc_node(release, size, gfp, NUMA_NO_NODE); } #endif void devres_for_each_res(struct device *dev, dr_release_t release, dr_match_t match, void *match_data, void (*fn)(struct device *, void *, void *), void *data); void devres_free(void *res); void devres_add(struct device *dev, void *res); void *devres_find(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); void *devres_get(struct device *dev, void *new_res, dr_match_t match, void *match_data); void *devres_remove(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); int devres_destroy(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); int devres_release(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); /* devres group */ void * __must_check devres_open_group(struct device *dev, void *id, gfp_t gfp); void devres_close_group(struct device *dev, void *id); void devres_remove_group(struct device *dev, void *id); int devres_release_group(struct device *dev, void *id); /* managed devm_k.alloc/kfree for device drivers */ void *devm_kmalloc(struct device *dev, size_t size, gfp_t gfp) __malloc; void *devm_krealloc(struct device *dev, void *ptr, size_t size, gfp_t gfp) __must_check; __printf(3, 0) char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt, va_list ap) __malloc; __printf(3, 4) char *devm_kasprintf(struct device *dev, gfp_t gfp, const char *fmt, ...) __malloc; static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp) { return devm_kmalloc(dev, size, gfp | __GFP_ZERO); } static inline void *devm_kmalloc_array(struct device *dev, size_t n, size_t size, gfp_t flags) { size_t bytes; if (unlikely(check_mul_overflow(n, size, &bytes))) return NULL; return devm_kmalloc(dev, bytes, flags); } static inline void *devm_kcalloc(struct device *dev, size_t n, size_t size, gfp_t flags) { return devm_kmalloc_array(dev, n, size, flags | __GFP_ZERO); } void devm_kfree(struct device *dev, const void *p); char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp) __malloc; const char *devm_kstrdup_const(struct device *dev, const char *s, gfp_t gfp); void *devm_kmemdup(struct device *dev, const void *src, size_t len, gfp_t gfp); unsigned long devm_get_free_pages(struct device *dev, gfp_t gfp_mask, unsigned int order); void devm_free_pages(struct device *dev, unsigned long addr); void __iomem *devm_ioremap_resource(struct device *dev, const struct resource *res); void __iomem *devm_ioremap_resource_wc(struct device *dev, const struct resource *res); void __iomem *devm_of_iomap(struct device *dev, struct device_node *node, int index, resource_size_t *size); /* allows to add/remove a custom action to devres stack */ int devm_add_action(struct device *dev, void (*action)(void *), void *data); void devm_remove_action(struct device *dev, void (*action)(void *), void *data); void devm_release_action(struct device *dev, void (*action)(void *), void *data); static inline int devm_add_action_or_reset(struct device *dev, void (*action)(void *), void *data) { int ret; ret = devm_add_action(dev, action, data); if (ret) action(data); return ret; } /** * devm_alloc_percpu - Resource-managed alloc_percpu * @dev: Device to allocate per-cpu memory for * @type: Type to allocate per-cpu memory for * * Managed alloc_percpu. Per-cpu memory allocated with this function is * automatically freed on driver detach. * * RETURNS: * Pointer to allocated memory on success, NULL on failure. */ #define devm_alloc_percpu(dev, type) \ ((typeof(type) __percpu *)__devm_alloc_percpu((dev), sizeof(type), \ __alignof__(type))) void __percpu *__devm_alloc_percpu(struct device *dev, size_t size, size_t align); void devm_free_percpu(struct device *dev, void __percpu *pdata); struct device_dma_parameters { /* * a low level driver may set these to teach IOMMU code about * sg limitations. */ unsigned int max_segment_size; unsigned int min_align_mask; unsigned long segment_boundary_mask; }; /** * enum device_link_state - Device link states. * @DL_STATE_NONE: The presence of the drivers is not being tracked. * @DL_STATE_DORMANT: None of the supplier/consumer drivers is present. * @DL_STATE_AVAILABLE: The supplier driver is present, but the consumer is not. * @DL_STATE_CONSUMER_PROBE: The consumer is probing (supplier driver present). * @DL_STATE_ACTIVE: Both the supplier and consumer drivers are present. * @DL_STATE_SUPPLIER_UNBIND: The supplier driver is unbinding. */ enum device_link_state { DL_STATE_NONE = -1, DL_STATE_DORMANT = 0, DL_STATE_AVAILABLE, DL_STATE_CONSUMER_PROBE, DL_STATE_ACTIVE, DL_STATE_SUPPLIER_UNBIND, }; /* * Device link flags. * * STATELESS: The core will not remove this link automatically. * AUTOREMOVE_CONSUMER: Remove the link automatically on consumer driver unbind. * PM_RUNTIME: If set, the runtime PM framework will use this link. * RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation. * AUTOREMOVE_SUPPLIER: Remove the link automatically on supplier driver unbind. * AUTOPROBE_CONSUMER: Probe consumer driver automatically after supplier binds. * MANAGED: The core tracks presence of supplier/consumer drivers (internal). * SYNC_STATE_ONLY: Link only affects sync_state() behavior. */ #define DL_FLAG_STATELESS BIT(0) #define DL_FLAG_AUTOREMOVE_CONSUMER BIT(1) #define DL_FLAG_PM_RUNTIME BIT(2) #define DL_FLAG_RPM_ACTIVE BIT(3) #define DL_FLAG_AUTOREMOVE_SUPPLIER BIT(4) #define DL_FLAG_AUTOPROBE_CONSUMER BIT(5) #define DL_FLAG_MANAGED BIT(6) #define DL_FLAG_SYNC_STATE_ONLY BIT(7) /** * enum dl_dev_state - Device driver presence tracking information. * @DL_DEV_NO_DRIVER: There is no driver attached to the device. * @DL_DEV_PROBING: A driver is probing. * @DL_DEV_DRIVER_BOUND: The driver has been bound to the device. * @DL_DEV_UNBINDING: The driver is unbinding from the device. */ enum dl_dev_state { DL_DEV_NO_DRIVER = 0, DL_DEV_PROBING, DL_DEV_DRIVER_BOUND, DL_DEV_UNBINDING, }; /** * struct dev_links_info - Device data related to device links. * @suppliers: List of links to supplier devices. * @consumers: List of links to consumer devices. * @needs_suppliers: Hook to global list of devices waiting for suppliers. * @defer_hook: Hook to global list of devices that have deferred sync_state or * deferred fw_devlink. * @need_for_probe: If needs_suppliers is on a list, this indicates if the * suppliers are needed for probe or not. * @status: Driver status information. */ struct dev_links_info { struct list_head suppliers; struct list_head consumers; struct list_head needs_suppliers; struct list_head defer_hook; bool need_for_probe; enum dl_dev_state status; }; /** * struct device - The basic device structure * @parent: The device's "parent" device, the device to which it is attached. * In most cases, a parent device is some sort of bus or host * controller. If parent is NULL, the device, is a top-level device, * which is not usually what you want. * @p: Holds the private data of the driver core portions of the device. * See the comment of the struct device_private for detail. * @kobj: A top-level, abstract class from which other classes are derived. * @init_name: Initial name of the device. * @type: The type of device. * This identifies the device type and carries type-specific * information. * @mutex: Mutex to synchronize calls to its driver. * @lockdep_mutex: An optional debug lock that a subsystem can use as a * peer lock to gain localized lockdep coverage of the device_lock. * @bus: Type of bus device is on. * @driver: Which driver has allocated this * @platform_data: Platform data specific to the device. * Example: For devices on custom boards, as typical of embedded * and SOC based hardware, Linux often uses platform_data to point * to board-specific structures describing devices and how they * are wired. That can include what ports are available, chip * variants, which GPIO pins act in what additional roles, and so * on. This shrinks the "Board Support Packages" (BSPs) and * minimizes board-specific #ifdefs in drivers. * @driver_data: Private pointer for driver specific info. * @links: Links to suppliers and consumers of this device. * @power: For device power management. * See Documentation/driver-api/pm/devices.rst for details. * @pm_domain: Provide callbacks that are executed during system suspend, * hibernation, system resume and during runtime PM transitions * along with subsystem-level and driver-level callbacks. * @em_pd: device's energy model performance domain * @pins: For device pin management. * See Documentation/driver-api/pinctl.rst for details. * @msi_list: Hosts MSI descriptors * @msi_domain: The generic MSI domain this device is using. * @numa_node: NUMA node this device is close to. * @dma_ops: DMA mapping operations for this device. * @dma_mask: Dma mask (if dma'ble device). * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all * hardware supports 64-bit addresses for consistent allocations * such descriptors. * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller * DMA limit than the device itself supports. * @dma_range_map: map for DMA memory ranges relative to that of RAM * @dma_parms: A low level driver may set these to teach IOMMU code about * segment limitations. * @dma_pools: Dma pools (if dma'ble device). * @dma_mem: Internal for coherent mem override. * @cma_area: Contiguous memory area for dma allocations * @archdata: For arch-specific additions. * @of_node: Associated device tree node. * @fwnode: Associated device node supplied by platform firmware. * @devt: For creating the sysfs "dev". * @id: device instance * @devres_lock: Spinlock to protect the resource of the device. * @devres_head: The resources list of the device. * @knode_class: The node used to add the device to the class list. * @class: The class of the device. * @groups: Optional attribute groups. * @release: Callback to free the device after all references have * gone away. This should be set by the allocator of the * device (i.e. the bus driver that discovered the device). * @iommu_group: IOMMU group the device belongs to. * @iommu: Per device generic IOMMU runtime data * * @offline_disabled: If set, the device is permanently online. * @offline: Set after successful invocation of bus type's .offline(). * @of_node_reused: Set if the device-tree node is shared with an ancestor * device. * @state_synced: The hardware state of this device has been synced to match * the software state of this device by calling the driver/bus * sync_state() callback. * @dma_coherent: this particular device is dma coherent, even if the * architecture supports non-coherent devices. * @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the * streaming DMA operations (->map_* / ->unmap_* / ->sync_*), * and optionall (if the coherent mask is large enough) also * for dma allocations. This flag is managed by the dma ops * instance from ->dma_supported. * * At the lowest level, every device in a Linux system is represented by an * instance of struct device. The device structure contains the information * that the device model core needs to model the system. Most subsystems, * however, track additional information about the devices they host. As a * result, it is rare for devices to be represented by bare device structures; * instead, that structure, like kobject structures, is usually embedded within * a higher-level representation of the device. */ struct device { struct kobject kobj; struct device *parent; struct device_private *p; const char *init_name; /* initial name of the device */ const struct device_type *type; struct bus_type *bus; /* type of bus device is on */ struct device_driver *driver; /* which driver has allocated this device */ void *platform_data; /* Platform specific data, device core doesn't touch it */ void *driver_data; /* Driver data, set and get with dev_set_drvdata/dev_get_drvdata */ #ifdef CONFIG_PROVE_LOCKING struct mutex lockdep_mutex; #endif struct mutex mutex; /* mutex to synchronize calls to * its driver. */ struct dev_links_info links; struct dev_pm_info power; struct dev_pm_domain *pm_domain; #ifdef CONFIG_ENERGY_MODEL struct em_perf_domain *em_pd; #endif #ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN struct irq_domain *msi_domain; #endif #ifdef CONFIG_PINCTRL struct dev_pin_info *pins; #endif #ifdef CONFIG_GENERIC_MSI_IRQ raw_spinlock_t msi_lock; struct list_head msi_list; #endif #ifdef CONFIG_DMA_OPS const struct dma_map_ops *dma_ops; #endif u64 *dma_mask; /* dma mask (if dma'able device) */ u64 coherent_dma_mask;/* Like dma_mask, but for alloc_coherent mappings as not all hardware supports 64 bit addresses for consistent allocations such descriptors. */ u64 bus_dma_limit; /* upstream dma constraint */ const struct bus_dma_region *dma_range_map; struct device_dma_parameters *dma_parms; struct list_head dma_pools; /* dma pools (if dma'ble) */ #ifdef CONFIG_DMA_DECLARE_COHERENT struct dma_coherent_mem *dma_mem; /* internal for coherent mem override */ #endif #ifdef CONFIG_DMA_CMA struct cma *cma_area; /* contiguous memory area for dma allocations */ #endif /* arch specific additions */ struct dev_archdata archdata; struct device_node *of_node; /* associated device tree node */ struct fwnode_handle *fwnode; /* firmware device node */ #ifdef CONFIG_NUMA int numa_node; /* NUMA node this device is close to */ #endif dev_t devt; /* dev_t, creates the sysfs "dev" */ u32 id; /* device instance */ spinlock_t devres_lock; struct list_head devres_head; struct class *class; const struct attribute_group **groups; /* optional groups */ void (*release)(struct device *dev); struct iommu_group *iommu_group; struct dev_iommu *iommu; bool offline_disabled:1; bool offline:1; bool of_node_reused:1; bool state_synced:1; #if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE) || \ defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \ defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL) bool dma_coherent:1; #endif #ifdef CONFIG_DMA_OPS_BYPASS bool dma_ops_bypass : 1; #endif }; /** * struct device_link - Device link representation. * @supplier: The device on the supplier end of the link. * @s_node: Hook to the supplier device's list of links to consumers. * @consumer: The device on the consumer end of the link. * @c_node: Hook to the consumer device's list of links to suppliers. * @link_dev: device used to expose link details in sysfs * @status: The state of the link (with respect to the presence of drivers). * @flags: Link flags. * @rpm_active: Whether or not the consumer device is runtime-PM-active. * @kref: Count repeated addition of the same link. * @rm_work: Work structure used for removing the link. * @supplier_preactivated: Supplier has been made active before consumer probe. */ struct device_link { struct device *supplier; struct list_head s_node; struct device *consumer; struct list_head c_node; struct device link_dev; enum device_link_state status; u32 flags; refcount_t rpm_active; struct kref kref; struct work_struct rm_work; bool supplier_preactivated; /* Owned by consumer probe. */ }; static inline struct device *kobj_to_dev(struct kobject *kobj) { return container_of(kobj, struct device, kobj); } /** * device_iommu_mapped - Returns true when the device DMA is translated * by an IOMMU * @dev: Device to perform the check on */ static inline bool device_iommu_mapped(struct device *dev) { return (dev->iommu_group != NULL); } /* Get the wakeup routines, which depend on struct device */ #include <linux/pm_wakeup.h> static inline const char *dev_name(const struct device *dev) { /* Use the init name until the kobject becomes available */ if (dev->init_name) return dev->init_name; return kobject_name(&dev->kobj); } /** * dev_bus_name - Return a device's bus/class name, if at all possible * @dev: struct device to get the bus/class name of * * Will return the name of the bus/class the device is attached to. If it is * not attached to a bus/class, an empty string will be returned. */ static inline const char *dev_bus_name(const struct device *dev) { return dev->bus ? dev->bus->name : (dev->class ? dev->class->name : ""); } __printf(2, 3) int dev_set_name(struct device *dev, const char *name, ...); #ifdef CONFIG_NUMA static inline int dev_to_node(struct device *dev) { return dev->numa_node; } static inline void set_dev_node(struct device *dev, int node) { dev->numa_node = node; } #else static inline int dev_to_node(struct device *dev) { return NUMA_NO_NODE; } static inline void set_dev_node(struct device *dev, int node) { } #endif static inline struct irq_domain *dev_get_msi_domain(const struct device *dev) { #ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN return dev->msi_domain; #else return NULL; #endif } static inline void dev_set_msi_domain(struct device *dev, struct irq_domain *d) { #ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN dev->msi_domain = d; #endif } static inline void *dev_get_drvdata(const struct device *dev) { return dev->driver_data; } static inline void dev_set_drvdata(struct device *dev, void *data) { dev->driver_data = data; } static inline struct pm_subsys_data *dev_to_psd(struct device *dev) { return dev ? dev->power.subsys_data : NULL; } static inline unsigned int dev_get_uevent_suppress(const struct device *dev) { return dev->kobj.uevent_suppress; } static inline void dev_set_uevent_suppress(struct device *dev, int val) { dev->kobj.uevent_suppress = val; } static inline int device_is_registered(struct device *dev) { return dev->kobj.state_in_sysfs; } static inline void device_enable_async_suspend(struct device *dev) { if (!dev->power.is_prepared) dev->power.async_suspend = true; } static inline void device_disable_async_suspend(struct device *dev) { if (!dev->power.is_prepared) dev->power.async_suspend = false; } static inline bool device_async_suspend_enabled(struct device *dev) { return !!dev->power.async_suspend; } static inline bool device_pm_not_required(struct device *dev) { return dev->power.no_pm; } static inline void device_set_pm_not_required(struct device *dev) { dev->power.no_pm = true; } static inline void dev_pm_syscore_device(struct device *dev, bool val) { #ifdef CONFIG_PM_SLEEP dev->power.syscore = val; #endif } static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags) { dev->power.driver_flags = flags; } static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags) { return !!(dev->power.driver_flags & flags); } static inline void device_lock(struct device *dev) { mutex_lock(&dev->mutex); } static inline int device_lock_interruptible(struct device *dev) { return mutex_lock_interruptible(&dev->mutex); } static inline int device_trylock(struct device *dev) { return mutex_trylock(&dev->mutex); } static inline void device_unlock(struct device *dev) { mutex_unlock(&dev->mutex); } static inline void device_lock_assert(struct device *dev) { lockdep_assert_held(&dev->mutex); } static inline struct device_node *dev_of_node(struct device *dev) { if (!IS_ENABLED(CONFIG_OF) || !dev) return NULL; return dev->of_node; } static inline bool dev_has_sync_state(struct device *dev) { if (!dev) return false; if (dev->driver && dev->driver->sync_state) return true; if (dev->bus && dev->bus->sync_state) return true; return false; } /* * High level routines for use by the bus drivers */ int __must_check device_register(struct device *dev); void device_unregister(struct device *dev); void device_initialize(struct device *dev); int __must_check device_add(struct device *dev); void device_del(struct device *dev); int device_for_each_child(struct device *dev, void *data, int (*fn)(struct device *dev, void *data)); int device_for_each_child_reverse(struct device *dev, void *data, int (*fn)(struct device *dev, void *data)); struct device *device_find_child(struct device *dev, void *data, int (*match)(struct device *dev, void *data)); struct device *device_find_child_by_name(struct device *parent, const char *name); int device_rename(struct device *dev, const char *new_name); int device_move(struct device *dev, struct device *new_parent, enum dpm_order dpm_order); int device_change_owner(struct device *dev, kuid_t kuid, kgid_t kgid); const char *device_get_devnode(struct device *dev, umode_t *mode, kuid_t *uid, kgid_t *gid, const char **tmp); int device_is_dependent(struct device *dev, void *target); static inline bool device_supports_offline(struct device *dev) { return dev->bus && dev->bus->offline && dev->bus->online; } void lock_device_hotplug(void); void unlock_device_hotplug(void); int lock_device_hotplug_sysfs(void); int device_offline(struct device *dev); int device_online(struct device *dev); void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode); void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode); void device_set_of_node_from_dev(struct device *dev, const struct device *dev2); static inline int dev_num_vf(struct device *dev) { if (dev->bus && dev->bus->num_vf) return dev->bus->num_vf(dev); return 0; } /* * Root device objects for grouping under /sys/devices */ struct device *__root_device_register(const char *name, struct module *owner); /* This is a macro to avoid include problems with THIS_MODULE */ #define root_device_register(name) \ __root_device_register(name, THIS_MODULE) void root_device_unregister(struct device *root); static inline void *dev_get_platdata(const struct device *dev) { return dev->platform_data; } /* * Manual binding of a device to driver. See drivers/base/bus.c * for information on use. */ int __must_check device_bind_driver(struct device *dev); void device_release_driver(struct device *dev); int __must_check device_attach(struct device *dev); int __must_check driver_attach(struct device_driver *drv); void device_initial_probe(struct device *dev); int __must_check device_reprobe(struct device *dev); bool device_is_bound(struct device *dev); /* * Easy functions for dynamically creating devices on the fly */ __printf(5, 6) struct device * device_create(struct class *cls, struct device *parent, dev_t devt, void *drvdata, const char *fmt, ...); __printf(6, 7) struct device * device_create_with_groups(struct class *cls, struct device *parent, dev_t devt, void *drvdata, const struct attribute_group **groups, const char *fmt, ...); void device_destroy(struct class *cls, dev_t devt); int __must_check device_add_groups(struct device *dev, const struct attribute_group **groups); void device_remove_groups(struct device *dev, const struct attribute_group **groups); static inline int __must_check device_add_group(struct device *dev, const struct attribute_group *grp) { const struct attribute_group *groups[] = { grp, NULL }; return device_add_groups(dev, groups); } static inline void device_remove_group(struct device *dev, const struct attribute_group *grp) { const struct attribute_group *groups[] = { grp, NULL }; return device_remove_groups(dev, groups); } int __must_check devm_device_add_groups(struct device *dev, const struct attribute_group **groups); void devm_device_remove_groups(struct device *dev, const struct attribute_group **groups); int __must_check devm_device_add_group(struct device *dev, const struct attribute_group *grp); void devm_device_remove_group(struct device *dev, const struct attribute_group *grp); /* * Platform "fixup" functions - allow the platform to have their say * about devices and actions that the general device layer doesn't * know about. */ /* Notify platform of device discovery */ extern int (*platform_notify)(struct device *dev); extern int (*platform_notify_remove)(struct device *dev); /* * get_device - atomically increment the reference count for the device. * */ struct device *get_device(struct device *dev); void put_device(struct device *dev); bool kill_device(struct device *dev); #ifdef CONFIG_DEVTMPFS int devtmpfs_mount(void); #else static inline int devtmpfs_mount(void) { return 0; } #endif /* drivers/base/power/shutdown.c */ void device_shutdown(void); /* debugging and troubleshooting/diagnostic helpers. */ const char *dev_driver_string(const struct device *dev); /* Device links interface. */ struct device_link *device_link_add(struct device *consumer, struct device *supplier, u32 flags); void device_link_del(struct device_link *link); void device_link_remove(void *consumer, struct device *supplier); void device_links_supplier_sync_state_pause(void); void device_links_supplier_sync_state_resume(void); extern __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...); /* Create alias, so I can be autoloaded. */ #define MODULE_ALIAS_CHARDEV(major,minor) \ MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor)) #define MODULE_ALIAS_CHARDEV_MAJOR(major) \ MODULE_ALIAS("char-major-" __stringify(major) "-*") #ifdef CONFIG_SYSFS_DEPRECATED extern long sysfs_deprecated; #else #define sysfs_deprecated 0 #endif #endif /* _DEVICE_H_ */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * VLAN An implementation of 802.1Q VLAN tagging. * * Authors: Ben Greear <greearb@candelatech.com> */ #ifndef _LINUX_IF_VLAN_H_ #define _LINUX_IF_VLAN_H_ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/rtnetlink.h> #include <linux/bug.h> #include <uapi/linux/if_vlan.h> #define VLAN_HLEN 4 /* The additional bytes required by VLAN * (in addition to the Ethernet header) */ #define VLAN_ETH_HLEN 18 /* Total octets in header. */ #define VLAN_ETH_ZLEN 64 /* Min. octets in frame sans FCS */ /* * According to 802.3ac, the packet can be 4 bytes longer. --Klika Jan */ #define VLAN_ETH_DATA_LEN 1500 /* Max. octets in payload */ #define VLAN_ETH_FRAME_LEN 1518 /* Max. octets in frame sans FCS */ #define VLAN_MAX_DEPTH 8 /* Max. number of nested VLAN tags parsed */ /* * struct vlan_hdr - vlan header * @h_vlan_TCI: priority and VLAN ID * @h_vlan_encapsulated_proto: packet type ID or len */ struct vlan_hdr { __be16 h_vlan_TCI; __be16 h_vlan_encapsulated_proto; }; /** * struct vlan_ethhdr - vlan ethernet header (ethhdr + vlan_hdr) * @h_dest: destination ethernet address * @h_source: source ethernet address * @h_vlan_proto: ethernet protocol * @h_vlan_TCI: priority and VLAN ID * @h_vlan_encapsulated_proto: packet type ID or len */ struct vlan_ethhdr { unsigned char h_dest[ETH_ALEN]; unsigned char h_source[ETH_ALEN]; __be16 h_vlan_proto; __be16 h_vlan_TCI; __be16 h_vlan_encapsulated_proto; }; #include <linux/skbuff.h> static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) { return (struct vlan_ethhdr *)skb_mac_header(skb); } #define VLAN_PRIO_MASK 0xe000 /* Priority Code Point */ #define VLAN_PRIO_SHIFT 13 #define VLAN_CFI_MASK 0x1000 /* Canonical Format Indicator / Drop Eligible Indicator */ #define VLAN_VID_MASK 0x0fff /* VLAN Identifier */ #define VLAN_N_VID 4096 /* found in socket.c */ extern void vlan_ioctl_set(int (*hook)(struct net *, void __user *)); static inline bool is_vlan_dev(const struct net_device *dev) { return dev->priv_flags & IFF_802_1Q_VLAN; } #define skb_vlan_tag_present(__skb) ((__skb)->vlan_present) #define skb_vlan_tag_get(__skb) ((__skb)->vlan_tci) #define skb_vlan_tag_get_id(__skb) ((__skb)->vlan_tci & VLAN_VID_MASK) #define skb_vlan_tag_get_cfi(__skb) (!!((__skb)->vlan_tci & VLAN_CFI_MASK)) #define skb_vlan_tag_get_prio(__skb) (((__skb)->vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT) static inline int vlan_get_rx_ctag_filter_info(struct net_device *dev) { ASSERT_RTNL(); return notifier_to_errno(call_netdevice_notifiers(NETDEV_CVLAN_FILTER_PUSH_INFO, dev)); } static inline void vlan_drop_rx_ctag_filter_info(struct net_device *dev) { ASSERT_RTNL(); call_netdevice_notifiers(NETDEV_CVLAN_FILTER_DROP_INFO, dev); } static inline int vlan_get_rx_stag_filter_info(struct net_device *dev) { ASSERT_RTNL(); return notifier_to_errno(call_netdevice_notifiers(NETDEV_SVLAN_FILTER_PUSH_INFO, dev)); } static inline void vlan_drop_rx_stag_filter_info(struct net_device *dev) { ASSERT_RTNL(); call_netdevice_notifiers(NETDEV_SVLAN_FILTER_DROP_INFO, dev); } /** * struct vlan_pcpu_stats - VLAN percpu rx/tx stats * @rx_packets: number of received packets * @rx_bytes: number of received bytes * @rx_multicast: number of received multicast packets * @tx_packets: number of transmitted packets * @tx_bytes: number of transmitted bytes * @syncp: synchronization point for 64bit counters * @rx_errors: number of rx errors * @tx_dropped: number of tx drops */ struct vlan_pcpu_stats { u64 rx_packets; u64 rx_bytes; u64 rx_multicast; u64 tx_packets; u64 tx_bytes; struct u64_stats_sync syncp; u32 rx_errors; u32 tx_dropped; }; #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) extern struct net_device *__vlan_find_dev_deep_rcu(struct net_device *real_dev, __be16 vlan_proto, u16 vlan_id); extern int vlan_for_each(struct net_device *dev, int (*action)(struct net_device *dev, int vid, void *arg), void *arg); extern struct net_device *vlan_dev_real_dev(const struct net_device *dev); extern u16 vlan_dev_vlan_id(const struct net_device *dev); extern __be16 vlan_dev_vlan_proto(const struct net_device *dev); /** * struct vlan_priority_tci_mapping - vlan egress priority mappings * @priority: skb priority * @vlan_qos: vlan priority: (skb->priority << 13) & 0xE000 * @next: pointer to next struct */ struct vlan_priority_tci_mapping { u32 priority; u16 vlan_qos; struct vlan_priority_tci_mapping *next; }; struct proc_dir_entry; struct netpoll; /** * struct vlan_dev_priv - VLAN private device data * @nr_ingress_mappings: number of ingress priority mappings * @ingress_priority_map: ingress priority mappings * @nr_egress_mappings: number of egress priority mappings * @egress_priority_map: hash of egress priority mappings * @vlan_proto: VLAN encapsulation protocol * @vlan_id: VLAN identifier * @flags: device flags * @real_dev: underlying netdevice * @real_dev_addr: address of underlying netdevice * @dent: proc dir entry * @vlan_pcpu_stats: ptr to percpu rx stats */ struct vlan_dev_priv { unsigned int nr_ingress_mappings; u32 ingress_priority_map[8]; unsigned int nr_egress_mappings; struct vlan_priority_tci_mapping *egress_priority_map[16]; __be16 vlan_proto; u16 vlan_id; u16 flags; struct net_device *real_dev; unsigned char real_dev_addr[ETH_ALEN]; struct proc_dir_entry *dent; struct vlan_pcpu_stats __percpu *vlan_pcpu_stats; #ifdef CONFIG_NET_POLL_CONTROLLER struct netpoll *netpoll; #endif }; static inline struct vlan_dev_priv *vlan_dev_priv(const struct net_device *dev) { return netdev_priv(dev); } static inline u16 vlan_dev_get_egress_qos_mask(struct net_device *dev, u32 skprio) { struct vlan_priority_tci_mapping *mp; smp_rmb(); /* coupled with smp_wmb() in vlan_dev_set_egress_priority() */ mp = vlan_dev_priv(dev)->egress_priority_map[(skprio & 0xF)]; while (mp) { if (mp->priority == skprio) { return mp->vlan_qos; /* This should already be shifted * to mask correctly with the * VLAN's TCI */ } mp = mp->next; } return 0; } extern bool vlan_do_receive(struct sk_buff **skb); extern int vlan_vid_add(struct net_device *dev, __be16 proto, u16 vid); extern void vlan_vid_del(struct net_device *dev, __be16 proto, u16 vid); extern int vlan_vids_add_by_dev(struct net_device *dev, const struct net_device *by_dev); extern void vlan_vids_del_by_dev(struct net_device *dev, const struct net_device *by_dev); extern bool vlan_uses_dev(const struct net_device *dev); #else static inline struct net_device * __vlan_find_dev_deep_rcu(struct net_device *real_dev, __be16 vlan_proto, u16 vlan_id) { return NULL; } static inline int vlan_for_each(struct net_device *dev, int (*action)(struct net_device *dev, int vid, void *arg), void *arg) { return 0; } static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev) { BUG(); return NULL; } static inline u16 vlan_dev_vlan_id(const struct net_device *dev) { BUG(); return 0; } static inline __be16 vlan_dev_vlan_proto(const struct net_device *dev) { BUG(); return 0; } static inline u16 vlan_dev_get_egress_qos_mask(struct net_device *dev, u32 skprio) { return 0; } static inline bool vlan_do_receive(struct sk_buff **skb) { return false; } static inline int vlan_vid_add(struct net_device *dev, __be16 proto, u16 vid) { return 0; } static inline void vlan_vid_del(struct net_device *dev, __be16 proto, u16 vid) { } static inline int vlan_vids_add_by_dev(struct net_device *dev, const struct net_device *by_dev) { return 0; } static inline void vlan_vids_del_by_dev(struct net_device *dev, const struct net_device *by_dev) { } static inline bool vlan_uses_dev(const struct net_device *dev) { return false; } #endif /** * eth_type_vlan - check for valid vlan ether type. * @ethertype: ether type to check * * Returns true if the ether type is a vlan ether type. */ static inline bool eth_type_vlan(__be16 ethertype) { switch (ethertype) { case htons(ETH_P_8021Q): case htons(ETH_P_8021AD): return true; default: return false; } } static inline bool vlan_hw_offload_capable(netdev_features_t features, __be16 proto) { if (proto == htons(ETH_P_8021Q) && features & NETIF_F_HW_VLAN_CTAG_TX) return true; if (proto == htons(ETH_P_8021AD) && features & NETIF_F_HW_VLAN_STAG_TX) return true; return false; } /** * __vlan_insert_inner_tag - inner VLAN tag inserting * @skb: skbuff to tag * @vlan_proto: VLAN encapsulation protocol * @vlan_tci: VLAN TCI to insert * @mac_len: MAC header length including outer vlan headers * * Inserts the VLAN tag into @skb as part of the payload at offset mac_len * Returns error if skb_cow_head fails. * * Does not change skb->protocol so this function can be used during receive. */ static inline int __vlan_insert_inner_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci, unsigned int mac_len) { struct vlan_ethhdr *veth; if (skb_cow_head(skb, VLAN_HLEN) < 0) return -ENOMEM; skb_push(skb, VLAN_HLEN); /* Move the mac header sans proto to the beginning of the new header. */ if (likely(mac_len > ETH_TLEN)) memmove(skb->data, skb->data + VLAN_HLEN, mac_len - ETH_TLEN); skb->mac_header -= VLAN_HLEN; veth = (struct vlan_ethhdr *)(skb->data + mac_len - ETH_HLEN); /* first, the ethernet type */ if (likely(mac_len >= ETH_TLEN)) { /* h_vlan_encapsulated_proto should already be populated, and * skb->data has space for h_vlan_proto */ veth->h_vlan_proto = vlan_proto; } else { /* h_vlan_encapsulated_proto should not be populated, and * skb->data has no space for h_vlan_proto */ veth->h_vlan_encapsulated_proto = skb->protocol; } /* now, the TCI */ veth->h_vlan_TCI = htons(vlan_tci); return 0; } /** * __vlan_insert_tag - regular VLAN tag inserting * @skb: skbuff to tag * @vlan_proto: VLAN encapsulation protocol * @vlan_tci: VLAN TCI to insert * * Inserts the VLAN tag into @skb as part of the payload * Returns error if skb_cow_head fails. * * Does not change skb->protocol so this function can be used during receive. */ static inline int __vlan_insert_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { return __vlan_insert_inner_tag(skb, vlan_proto, vlan_tci, ETH_HLEN); } /** * vlan_insert_inner_tag - inner VLAN tag inserting * @skb: skbuff to tag * @vlan_proto: VLAN encapsulation protocol * @vlan_tci: VLAN TCI to insert * @mac_len: MAC header length including outer vlan headers * * Inserts the VLAN tag into @skb as part of the payload at offset mac_len * Returns a VLAN tagged skb. If a new skb is created, @skb is freed. * * Following the skb_unshare() example, in case of error, the calling function * doesn't have to worry about freeing the original skb. * * Does not change skb->protocol so this function can be used during receive. */ static inline struct sk_buff *vlan_insert_inner_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci, unsigned int mac_len) { int err; err = __vlan_insert_inner_tag(skb, vlan_proto, vlan_tci, mac_len); if (err) { dev_kfree_skb_any(skb); return NULL; } return skb; } /** * vlan_insert_tag - regular VLAN tag inserting * @skb: skbuff to tag * @vlan_proto: VLAN encapsulation protocol * @vlan_tci: VLAN TCI to insert * * Inserts the VLAN tag into @skb as part of the payload * Returns a VLAN tagged skb. If a new skb is created, @skb is freed. * * Following the skb_unshare() example, in case of error, the calling function * doesn't have to worry about freeing the original skb. * * Does not change skb->protocol so this function can be used during receive. */ static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { return vlan_insert_inner_tag(skb, vlan_proto, vlan_tci, ETH_HLEN); } /** * vlan_insert_tag_set_proto - regular VLAN tag inserting * @skb: skbuff to tag * @vlan_proto: VLAN encapsulation protocol * @vlan_tci: VLAN TCI to insert * * Inserts the VLAN tag into @skb as part of the payload * Returns a VLAN tagged skb. If a new skb is created, @skb is freed. * * Following the skb_unshare() example, in case of error, the calling function * doesn't have to worry about freeing the original skb. */ static inline struct sk_buff *vlan_insert_tag_set_proto(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { skb = vlan_insert_tag(skb, vlan_proto, vlan_tci); if (skb) skb->protocol = vlan_proto; return skb; } /** * __vlan_hwaccel_clear_tag - clear hardware accelerated VLAN info * @skb: skbuff to clear * * Clears the VLAN information from @skb */ static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb) { skb->vlan_present = 0; } /** * __vlan_hwaccel_copy_tag - copy hardware accelerated VLAN info from another skb * @dst: skbuff to copy to * @src: skbuff to copy from * * Copies VLAN information from @src to @dst (for branchless code) */ static inline void __vlan_hwaccel_copy_tag(struct sk_buff *dst, const struct sk_buff *src) { dst->vlan_present = src->vlan_present; dst->vlan_proto = src->vlan_proto; dst->vlan_tci = src->vlan_tci; } /* * __vlan_hwaccel_push_inside - pushes vlan tag to the payload * @skb: skbuff to tag * * Pushes the VLAN tag from @skb->vlan_tci inside to the payload. * * Following the skb_unshare() example, in case of error, the calling function * doesn't have to worry about freeing the original skb. */ static inline struct sk_buff *__vlan_hwaccel_push_inside(struct sk_buff *skb) { skb = vlan_insert_tag_set_proto(skb, skb->vlan_proto, skb_vlan_tag_get(skb)); if (likely(skb)) __vlan_hwaccel_clear_tag(skb); return skb; } /** * __vlan_hwaccel_put_tag - hardware accelerated VLAN inserting * @skb: skbuff to tag * @vlan_proto: VLAN encapsulation protocol * @vlan_tci: VLAN TCI to insert * * Puts the VLAN TCI in @skb->vlan_tci and lets the device do the rest */ static inline void __vlan_hwaccel_put_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { skb->vlan_proto = vlan_proto; skb->vlan_tci = vlan_tci; skb->vlan_present = 1; } /** * __vlan_get_tag - get the VLAN ID that is part of the payload * @skb: skbuff to query * @vlan_tci: buffer to store value * * Returns error if the skb is not of VLAN type */ static inline int __vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci) { struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb->data; if (!eth_type_vlan(veth->h_vlan_proto)) return -EINVAL; *vlan_tci = ntohs(veth->h_vlan_TCI); return 0; } /** * __vlan_hwaccel_get_tag - get the VLAN ID that is in @skb->cb[] * @skb: skbuff to query * @vlan_tci: buffer to store value * * Returns error if @skb->vlan_tci is not set correctly */ static inline int __vlan_hwaccel_get_tag(const struct sk_buff *skb, u16 *vlan_tci) { if (skb_vlan_tag_present(skb)) { *vlan_tci = skb_vlan_tag_get(skb); return 0; } else { *vlan_tci = 0; return -EINVAL; } } /** * vlan_get_tag - get the VLAN ID from the skb * @skb: skbuff to query * @vlan_tci: buffer to store value * * Returns error if the skb is not VLAN tagged */ static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci) { if (skb->dev->features & NETIF_F_HW_VLAN_CTAG_TX) { return __vlan_hwaccel_get_tag(skb, vlan_tci); } else { return __vlan_get_tag(skb, vlan_tci); } } /** * vlan_get_protocol - get protocol EtherType. * @skb: skbuff to query * @type: first vlan protocol * @depth: buffer to store length of eth and vlan tags in bytes * * Returns the EtherType of the packet, regardless of whether it is * vlan encapsulated (normal or hardware accelerated) or not. */ static inline __be16 __vlan_get_protocol(const struct sk_buff *skb, __be16 type, int *depth) { unsigned int vlan_depth = skb->mac_len, parse_depth = VLAN_MAX_DEPTH; /* if type is 802.1Q/AD then the header should already be * present at mac_len - VLAN_HLEN (if mac_len > 0), or at * ETH_HLEN otherwise */ if (eth_type_vlan(type)) { if (vlan_depth) { if (WARN_ON(vlan_depth < VLAN_HLEN)) return 0; vlan_depth -= VLAN_HLEN; } else { vlan_depth = ETH_HLEN; } do { struct vlan_hdr vhdr, *vh; vh = skb_header_pointer(skb, vlan_depth, sizeof(vhdr), &vhdr); if (unlikely(!vh || !--parse_depth)) return 0; type = vh->h_vlan_encapsulated_proto; vlan_depth += VLAN_HLEN; } while (eth_type_vlan(type)); } if (depth) *depth = vlan_depth; return type; } /** * vlan_get_protocol - get protocol EtherType. * @skb: skbuff to query * * Returns the EtherType of the packet, regardless of whether it is * vlan encapsulated (normal or hardware accelerated) or not. */ static inline __be16 vlan_get_protocol(const struct sk_buff *skb) { return __vlan_get_protocol(skb, skb->protocol, NULL); } /* A getter for the SKB protocol field which will handle VLAN tags consistently * whether VLAN acceleration is enabled or not. */ static inline __be16 skb_protocol(const struct sk_buff *skb, bool skip_vlan) { if (!skip_vlan) /* VLAN acceleration strips the VLAN header from the skb and * moves it to skb->vlan_proto */ return skb_vlan_tag_present(skb) ? skb->vlan_proto : skb->protocol; return vlan_get_protocol(skb); } static inline void vlan_set_encap_proto(struct sk_buff *skb, struct vlan_hdr *vhdr) { __be16 proto; unsigned short *rawp; /* * Was a VLAN packet, grab the encapsulated protocol, which the layer * three protocols care about. */ proto = vhdr->h_vlan_encapsulated_proto; if (eth_proto_is_802_3(proto)) { skb->protocol = proto; return; } rawp = (unsigned short *)(vhdr + 1); if (*rawp == 0xFFFF) /* * This is a magic hack to spot IPX packets. Older Novell * breaks the protocol design and runs IPX over 802.3 without * an 802.2 LLC layer. We look for FFFF which isn't a used * 802.2 SSAP/DSAP. This won't work for fault tolerant netware * but does for the rest. */ skb->protocol = htons(ETH_P_802_3); else /* * Real 802.2 LLC */ skb->protocol = htons(ETH_P_802_2); } /** * skb_vlan_tagged - check if skb is vlan tagged. * @skb: skbuff to query * * Returns true if the skb is tagged, regardless of whether it is hardware * accelerated or not. */ static inline bool skb_vlan_tagged(const struct sk_buff *skb) { if (!skb_vlan_tag_present(skb) && likely(!eth_type_vlan(skb->protocol))) return false; return true; } /** * skb_vlan_tagged_multi - check if skb is vlan tagged with multiple headers. * @skb: skbuff to query * * Returns true if the skb is tagged with multiple vlan headers, regardless * of whether it is hardware accelerated or not. */ static inline bool skb_vlan_tagged_multi(struct sk_buff *skb) { __be16 protocol = skb->protocol; if (!skb_vlan_tag_present(skb)) { struct vlan_ethhdr *veh; if (likely(!eth_type_vlan(protocol))) return false; if (unlikely(!pskb_may_pull(skb, VLAN_ETH_HLEN))) return false; veh = (struct vlan_ethhdr *)skb->data; protocol = veh->h_vlan_encapsulated_proto; } if (!eth_type_vlan(protocol)) return false; return true; } /** * vlan_features_check - drop unsafe features for skb with multiple tags. * @skb: skbuff to query * @features: features to be checked * * Returns features without unsafe ones if the skb has multiple tags. */ static inline netdev_features_t vlan_features_check(struct sk_buff *skb, netdev_features_t features) { if (skb_vlan_tagged_multi(skb)) { /* In the case of multi-tagged packets, use a direct mask * instead of using netdev_interesect_features(), to make * sure that only devices supporting NETIF_F_HW_CSUM will * have checksum offloading support. */ features &= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM | NETIF_F_FRAGLIST | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; } return features; } /** * compare_vlan_header - Compare two vlan headers * @h1: Pointer to vlan header * @h2: Pointer to vlan header * * Compare two vlan headers, returns 0 if equal. * * Please note that alignment of h1 & h2 are only guaranteed to be 16 bits. */ static inline unsigned long compare_vlan_header(const struct vlan_hdr *h1, const struct vlan_hdr *h2) { #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) return *(u32 *)h1 ^ *(u32 *)h2; #else return ((__force u32)h1->h_vlan_TCI ^ (__force u32)h2->h_vlan_TCI) | ((__force u32)h1->h_vlan_encapsulated_proto ^ (__force u32)h2->h_vlan_encapsulated_proto); #endif } #endif /* !(_LINUX_IF_VLAN_H_) */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_TIMENS_H #define _LINUX_TIMENS_H #include <linux/sched.h> #include <linux/kref.h> #include <linux/nsproxy.h> #include <linux/ns_common.h> #include <linux/err.h> struct user_namespace; extern struct user_namespace init_user_ns; struct timens_offsets { struct timespec64 monotonic; struct timespec64 boottime; }; struct time_namespace { struct kref kref; struct user_namespace *user_ns; struct ucounts *ucounts; struct ns_common ns; struct timens_offsets offsets; struct page *vvar_page; /* If set prevents changing offsets after any task joined namespace. */ bool frozen_offsets; } __randomize_layout; extern struct time_namespace init_time_ns; #ifdef CONFIG_TIME_NS extern int vdso_join_timens(struct task_struct *task, struct time_namespace *ns); extern void timens_commit(struct task_struct *tsk, struct time_namespace *ns); static inline struct time_namespace *get_time_ns(struct time_namespace *ns) { kref_get(&ns->kref); return ns; } struct time_namespace *copy_time_ns(unsigned long flags, struct user_namespace *user_ns, struct time_namespace *old_ns); void free_time_ns(struct kref *kref); int timens_on_fork(struct nsproxy *nsproxy, struct task_struct *tsk); struct vdso_data *arch_get_vdso_data(void *vvar_page); static inline void put_time_ns(struct time_namespace *ns) { kref_put(&ns->kref, free_time_ns); } void proc_timens_show_offsets(struct task_struct *p, struct seq_file *m); struct proc_timens_offset { int clockid; struct timespec64 val; }; int proc_timens_set_offset(struct file *file, struct task_struct *p, struct proc_timens_offset *offsets, int n); static inline void timens_add_monotonic(struct timespec64 *ts) { struct timens_offsets *ns_offsets = &current->nsproxy->time_ns->offsets; *ts = timespec64_add(*ts, ns_offsets->monotonic); } static inline void timens_add_boottime(struct timespec64 *ts) { struct timens_offsets *ns_offsets = &current->nsproxy->time_ns->offsets; *ts = timespec64_add(*ts, ns_offsets->boottime); } ktime_t do_timens_ktime_to_host(clockid_t clockid, ktime_t tim, struct timens_offsets *offsets); static inline ktime_t timens_ktime_to_host(clockid_t clockid, ktime_t tim) { struct time_namespace *ns = current->nsproxy->time_ns; if (likely(ns == &init_time_ns)) return tim; return do_timens_ktime_to_host(clockid, tim, &ns->offsets); } #else static inline int vdso_join_timens(struct task_struct *task, struct time_namespace *ns) { return 0; } static inline void timens_commit(struct task_struct *tsk, struct time_namespace *ns) { } static inline struct time_namespace *get_time_ns(struct time_namespace *ns) { return NULL; } static inline void put_time_ns(struct time_namespace *ns) { } static inline struct time_namespace *copy_time_ns(unsigned long flags, struct user_namespace *user_ns, struct time_namespace *old_ns) { if (flags & CLONE_NEWTIME) return ERR_PTR(-EINVAL); return old_ns; } static inline int timens_on_fork(struct nsproxy *nsproxy, struct task_struct *tsk) { return 0; } static inline void timens_add_monotonic(struct timespec64 *ts) { } static inline void timens_add_boottime(struct timespec64 *ts) { } static inline ktime_t timens_ktime_to_host(clockid_t clockid, ktime_t tim) { return tim; } #endif #endif /* _LINUX_TIMENS_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __NET_DST_METADATA_H #define __NET_DST_METADATA_H 1 #include <linux/skbuff.h> #include <net/ip_tunnels.h> #include <net/dst.h> enum metadata_type { METADATA_IP_TUNNEL, METADATA_HW_PORT_MUX, }; struct hw_port_info { struct net_device *lower_dev; u32 port_id; }; struct metadata_dst { struct dst_entry dst; enum metadata_type type; union { struct ip_tunnel_info tun_info; struct hw_port_info port_info; } u; }; static inline struct metadata_dst *skb_metadata_dst(const struct sk_buff *skb) { struct metadata_dst *md_dst = (struct metadata_dst *) skb_dst(skb); if (md_dst && md_dst->dst.flags & DST_METADATA) return md_dst; return NULL; } static inline struct ip_tunnel_info * skb_tunnel_info(const struct sk_buff *skb) { struct metadata_dst *md_dst = skb_metadata_dst(skb); struct dst_entry *dst; if (md_dst && md_dst->type == METADATA_IP_TUNNEL) return &md_dst->u.tun_info; dst = skb_dst(skb); if (dst && dst->lwtstate && (dst->lwtstate->type == LWTUNNEL_ENCAP_IP || dst->lwtstate->type == LWTUNNEL_ENCAP_IP6)) return lwt_tun_info(dst->lwtstate); return NULL; } static inline bool skb_valid_dst(const struct sk_buff *skb) { struct dst_entry *dst = skb_dst(skb); return dst && !(dst->flags & DST_METADATA); } static inline int skb_metadata_dst_cmp(const struct sk_buff *skb_a, const struct sk_buff *skb_b) { const struct metadata_dst *a, *b; if (!(skb_a->_skb_refdst | skb_b->_skb_refdst)) return 0; a = (const struct metadata_dst *) skb_dst(skb_a); b = (const struct metadata_dst *) skb_dst(skb_b); if (!a != !b || a->type != b->type) return 1; switch (a->type) { case METADATA_HW_PORT_MUX: return memcmp(&a->u.port_info, &b->u.port_info, sizeof(a->u.port_info)); case METADATA_IP_TUNNEL: return memcmp(&a->u.tun_info, &b->u.tun_info, sizeof(a->u.tun_info) + a->u.tun_info.options_len); default: return 1; } } void metadata_dst_free(struct metadata_dst *); struct metadata_dst *metadata_dst_alloc(u8 optslen, enum metadata_type type, gfp_t flags); void metadata_dst_free_percpu(struct metadata_dst __percpu *md_dst); struct metadata_dst __percpu * metadata_dst_alloc_percpu(u8 optslen, enum metadata_type type, gfp_t flags); static inline struct metadata_dst *tun_rx_dst(int md_size) { struct metadata_dst *tun_dst; tun_dst = metadata_dst_alloc(md_size, METADATA_IP_TUNNEL, GFP_ATOMIC); if (!tun_dst) return NULL; tun_dst->u.tun_info.options_len = 0; tun_dst->u.tun_info.mode = 0; return tun_dst; } static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb) { struct metadata_dst *md_dst = skb_metadata_dst(skb); int md_size; struct metadata_dst *new_md; if (!md_dst || md_dst->type != METADATA_IP_TUNNEL) return ERR_PTR(-EINVAL); md_size = md_dst->u.tun_info.options_len; new_md = metadata_dst_alloc(md_size, METADATA_IP_TUNNEL, GFP_ATOMIC); if (!new_md) return ERR_PTR(-ENOMEM); memcpy(&new_md->u.tun_info, &md_dst->u.tun_info, sizeof(struct ip_tunnel_info) + md_size); skb_dst_drop(skb); dst_hold(&new_md->dst); skb_dst_set(skb, &new_md->dst); return new_md; } static inline struct ip_tunnel_info *skb_tunnel_info_unclone(struct sk_buff *skb) { struct metadata_dst *dst; dst = tun_dst_unclone(skb); if (IS_ERR(dst)) return NULL; return &dst->u.tun_info; } static inline struct metadata_dst *__ip_tun_set_dst(__be32 saddr, __be32 daddr, __u8 tos, __u8 ttl, __be16 tp_dst, __be16 flags, __be64 tunnel_id, int md_size) { struct metadata_dst *tun_dst; tun_dst = tun_rx_dst(md_size); if (!tun_dst) return NULL; ip_tunnel_key_init(&tun_dst->u.tun_info.key, saddr, daddr, tos, ttl, 0, 0, tp_dst, tunnel_id, flags); return tun_dst; } static inline struct metadata_dst *ip_tun_rx_dst(struct sk_buff *skb, __be16 flags, __be64 tunnel_id, int md_size) { const struct iphdr *iph = ip_hdr(skb); return __ip_tun_set_dst(iph->saddr, iph->daddr, iph->tos, iph->ttl, 0, flags, tunnel_id, md_size); } static inline struct metadata_dst *__ipv6_tun_set_dst(const struct in6_addr *saddr, const struct in6_addr *daddr, __u8 tos, __u8 ttl, __be16 tp_dst, __be32 label, __be16 flags, __be64 tunnel_id, int md_size) { struct metadata_dst *tun_dst; struct ip_tunnel_info *info; tun_dst = tun_rx_dst(md_size); if (!tun_dst) return NULL; info = &tun_dst->u.tun_info; info->mode = IP_TUNNEL_INFO_IPV6; info->key.tun_flags = flags; info->key.tun_id = tunnel_id; info->key.tp_src = 0; info->key.tp_dst = tp_dst; info->key.u.ipv6.src = *saddr; info->key.u.ipv6.dst = *daddr; info->key.tos = tos; info->key.ttl = ttl; info->key.label = label; return tun_dst; } static inline struct metadata_dst *ipv6_tun_rx_dst(struct sk_buff *skb, __be16 flags, __be64 tunnel_id, int md_size) { const struct ipv6hdr *ip6h = ipv6_hdr(skb); return __ipv6_tun_set_dst(&ip6h->saddr, &ip6h->daddr, ipv6_get_dsfield(ip6h), ip6h->hop_limit, 0, ip6_flowlabel(ip6h), flags, tunnel_id, md_size); } #endif /* __NET_DST_METADATA_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 /* SPDX-License-Identifier: GPL-2.0 */ /* * * Generic internet FLOW. * */ #ifndef _NET_FLOW_H #define _NET_FLOW_H #include <linux/socket.h> #include <linux/in6.h> #include <linux/atomic.h> #include <net/flow_dissector.h> #include <linux/uidgid.h> /* * ifindex generation is per-net namespace, and loopback is * always the 1st device in ns (see net_dev_init), thus any * loopback device should get ifindex 1 */ #define LOOPBACK_IFINDEX 1 struct flowi_tunnel { __be64 tun_id; }; struct flowi_common { int flowic_oif; int flowic_iif; __u32 flowic_mark; __u8 flowic_tos; __u8 flowic_scope; __u8 flowic_proto; __u8 flowic_flags; #define FLOWI_FLAG_ANYSRC 0x01 #define FLOWI_FLAG_KNOWN_NH 0x02 #define FLOWI_FLAG_SKIP_NH_OIF 0x04 __u32 flowic_secid; kuid_t flowic_uid; struct flowi_tunnel flowic_tun_key; __u32 flowic_multipath_hash; }; union flowi_uli { struct { __be16 dport; __be16 sport; } ports; struct { __u8 type; __u8 code; } icmpt; struct { __le16 dport; __le16 sport; } dnports; __be32 spi; __be32 gre_key; struct { __u8 type; } mht; }; struct flowi4 { struct flowi_common __fl_common; #define flowi4_oif __fl_common.flowic_oif #define flowi4_iif __fl_common.flowic_iif #define flowi4_mark __fl_common.flowic_mark #define flowi4_tos __fl_common.flowic_tos #define flowi4_scope __fl_common.flowic_scope #define flowi4_proto __fl_common.flowic_proto #define flowi4_flags __fl_common.flowic_flags #define flowi4_secid __fl_common.flowic_secid #define flowi4_tun_key __fl_common.flowic_tun_key #define flowi4_uid __fl_common.flowic_uid #define flowi4_multipath_hash __fl_common.flowic_multipath_hash /* (saddr,daddr) must be grouped, same order as in IP header */ __be32 saddr; __be32 daddr; union flowi_uli uli; #define fl4_sport uli.ports.sport #define fl4_dport uli.ports.dport #define fl4_icmp_type uli.icmpt.type #define fl4_icmp_code uli.icmpt.code #define fl4_ipsec_spi uli.spi #define fl4_mh_type uli.mht.type #define fl4_gre_key uli.gre_key } __attribute__((__aligned__(BITS_PER_LONG/8))); static inline void flowi4_init_output(struct flowi4 *fl4, int oif, __u32 mark, __u8 tos, __u8 scope, __u8 proto, __u8 flags, __be32 daddr, __be32 saddr, __be16 dport, __be16 sport, kuid_t uid) { fl4->flowi4_oif = oif; fl4->flowi4_iif = LOOPBACK_IFINDEX; fl4->flowi4_mark = mark; fl4->flowi4_tos = tos; fl4->flowi4_scope = scope; fl4->flowi4_proto = proto; fl4->flowi4_flags = flags; fl4->flowi4_secid = 0; fl4->flowi4_tun_key.tun_id = 0; fl4->flowi4_uid = uid; fl4->daddr = daddr; fl4->saddr = saddr; fl4->fl4_dport = dport; fl4->fl4_sport = sport; fl4->flowi4_multipath_hash = 0; } /* Reset some input parameters after previous lookup */ static inline void flowi4_update_output(struct flowi4 *fl4, int oif, __u8 tos, __be32 daddr, __be32 saddr) { fl4->flowi4_oif = oif; fl4->flowi4_tos = tos; fl4->daddr = daddr; fl4->saddr = saddr; } struct flowi6 { struct flowi_common __fl_common; #define flowi6_oif __fl_common.flowic_oif #define flowi6_iif __fl_common.flowic_iif #define flowi6_mark __fl_common.flowic_mark #define flowi6_scope __fl_common.flowic_scope #define flowi6_proto __fl_common.flowic_proto #define flowi6_flags __fl_common.flowic_flags #define flowi6_secid __fl_common.flowic_secid #define flowi6_tun_key __fl_common.flowic_tun_key #define flowi6_uid __fl_common.flowic_uid struct in6_addr daddr; struct in6_addr saddr; /* Note: flowi6_tos is encoded in flowlabel, too. */ __be32 flowlabel; union flowi_uli uli; #define fl6_sport uli.ports.sport #define fl6_dport uli.ports.dport #define fl6_icmp_type uli.icmpt.type #define fl6_icmp_code uli.icmpt.code #define fl6_ipsec_spi uli.spi #define fl6_mh_type uli.mht.type #define fl6_gre_key uli.gre_key __u32 mp_hash; } __attribute__((__aligned__(BITS_PER_LONG/8))); struct flowidn { struct flowi_common __fl_common; #define flowidn_oif __fl_common.flowic_oif #define flowidn_iif __fl_common.flowic_iif #define flowidn_mark __fl_common.flowic_mark #define flowidn_scope __fl_common.flowic_scope #define flowidn_proto __fl_common.flowic_proto #define flowidn_flags __fl_common.flowic_flags __le16 daddr; __le16 saddr; union flowi_uli uli; #define fld_sport uli.ports.sport #define fld_dport uli.ports.dport } __attribute__((__aligned__(BITS_PER_LONG/8))); struct flowi { union { struct flowi_common __fl_common; struct flowi4 ip4; struct flowi6 ip6; struct flowidn dn; } u; #define flowi_oif u.__fl_common.flowic_oif #define flowi_iif u.__fl_common.flowic_iif #define flowi_mark u.__fl_common.flowic_mark #define flowi_tos u.__fl_common.flowic_tos #define flowi_scope u.__fl_common.flowic_scope #define flowi_proto u.__fl_common.flowic_proto #define flowi_flags u.__fl_common.flowic_flags #define flowi_secid u.__fl_common.flowic_secid #define flowi_tun_key u.__fl_common.flowic_tun_key #define flowi_uid u.__fl_common.flowic_uid } __attribute__((__aligned__(BITS_PER_LONG/8))); static inline struct flowi *flowi4_to_flowi(struct flowi4 *fl4) { return container_of(fl4, struct flowi, u.ip4); } static inline struct flowi *flowi6_to_flowi(struct flowi6 *fl6) { return container_of(fl6, struct flowi, u.ip6); } static inline struct flowi *flowidn_to_flowi(struct flowidn *fldn) { return container_of(fldn, struct flowi, u.dn); } __u32 __get_hash_from_flowi6(const struct flowi6 *fl6, struct flow_keys *keys); #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 /* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2008 Intel Corporation * Author: Matthew Wilcox <willy@linux.intel.com> * * Please see kernel/locking/semaphore.c for documentation of these functions */ #ifndef __LINUX_SEMAPHORE_H #define __LINUX_SEMAPHORE_H #include <linux/list.h> #include <linux/spinlock.h> /* Please don't access any members of this structure directly */ struct semaphore { raw_spinlock_t lock; unsigned int count; struct list_head wait_list; }; #define __SEMAPHORE_INITIALIZER(name, n) \ { \ .lock = __RAW_SPIN_LOCK_UNLOCKED((name).lock), \ .count = n, \ .wait_list = LIST_HEAD_INIT((name).wait_list), \ } #define DEFINE_SEMAPHORE(name) \ struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1) static inline void sema_init(struct semaphore *sem, int val) { static struct lock_class_key __key; *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val); lockdep_init_map(&sem->lock.dep_map, "semaphore->lock", &__key, 0); } extern void down(struct semaphore *sem); extern int __must_check down_interruptible(struct semaphore *sem); extern int __must_check down_killable(struct semaphore *sem); extern int __must_check down_trylock(struct semaphore *sem); extern int __must_check down_timeout(struct semaphore *sem, long jiffies); extern void up(struct semaphore *sem); #endif /* __LINUX_SEMAPHORE_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef LINUX_MLD_H #define LINUX_MLD_H #include <linux/in6.h> #include <linux/icmpv6.h> /* MLDv1 Query/Report/Done */ struct mld_msg { struct icmp6hdr mld_hdr; struct in6_addr mld_mca; }; #define mld_type mld_hdr.icmp6_type #define mld_code mld_hdr.icmp6_code #define mld_cksum mld_hdr.icmp6_cksum #define mld_maxdelay mld_hdr.icmp6_maxdelay #define mld_reserved mld_hdr.icmp6_dataun.un_data16[1] /* Multicast Listener Discovery version 2 headers */ /* MLDv2 Report */ struct mld2_grec { __u8 grec_type; __u8 grec_auxwords; __be16 grec_nsrcs; struct in6_addr grec_mca; struct in6_addr grec_src[]; }; struct mld2_report { struct icmp6hdr mld2r_hdr; struct mld2_grec mld2r_grec[]; }; #define mld2r_type mld2r_hdr.icmp6_type #define mld2r_resv1 mld2r_hdr.icmp6_code #define mld2r_cksum mld2r_hdr.icmp6_cksum #define mld2r_resv2 mld2r_hdr.icmp6_dataun.un_data16[0] #define mld2r_ngrec mld2r_hdr.icmp6_dataun.un_data16[1] /* MLDv2 Query */ struct mld2_query { struct icmp6hdr mld2q_hdr; struct in6_addr mld2q_mca; #if defined(__LITTLE_ENDIAN_BITFIELD) __u8 mld2q_qrv:3, mld2q_suppress:1, mld2q_resv2:4; #elif defined(__BIG_ENDIAN_BITFIELD) __u8 mld2q_resv2:4, mld2q_suppress:1, mld2q_qrv:3; #else #error "Please fix <asm/byteorder.h>" #endif __u8 mld2q_qqic; __be16 mld2q_nsrcs; struct in6_addr mld2q_srcs[]; }; #define mld2q_type mld2q_hdr.icmp6_type #define mld2q_code mld2q_hdr.icmp6_code #define mld2q_cksum mld2q_hdr.icmp6_cksum #define mld2q_mrc mld2q_hdr.icmp6_maxdelay #define mld2q_resv1 mld2q_hdr.icmp6_dataun.un_data16[1] /* RFC3810, 5.1.3. Maximum Response Code: * * If Maximum Response Code >= 32768, Maximum Response Code represents a * floating-point value as follows: * * 0 1 2 3 4 5 6 7 8 9 A B C D E F * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * |1| exp | mant | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ */ #define MLDV2_MRC_EXP(value) (((value) >> 12) & 0x0007) #define MLDV2_MRC_MAN(value) ((value) & 0x0fff) /* RFC3810, 5.1.9. QQIC (Querier's Query Interval Code): * * If QQIC >= 128, QQIC represents a floating-point value as follows: * * 0 1 2 3 4 5 6 7 * +-+-+-+-+-+-+-+-+ * |1| exp | mant | * +-+-+-+-+-+-+-+-+ */ #define MLDV2_QQIC_EXP(value) (((value) >> 4) & 0x07) #define MLDV2_QQIC_MAN(value) ((value) & 0x0f) #define MLD_EXP_MIN_LIMIT 32768UL #define MLDV1_MRD_MAX_COMPAT (MLD_EXP_MIN_LIMIT - 1) static inline unsigned long mldv2_mrc(const struct mld2_query *mlh2) { /* RFC3810, 5.1.3. Maximum Response Code */ unsigned long ret, mc_mrc = ntohs(mlh2->mld2q_mrc); if (mc_mrc < MLD_EXP_MIN_LIMIT) { ret = mc_mrc; } else { unsigned long mc_man, mc_exp; mc_exp = MLDV2_MRC_EXP(mc_mrc); mc_man = MLDV2_MRC_MAN(mc_mrc); ret = (mc_man | 0x1000) << (mc_exp + 3); } return ret; } #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_SMP_H #define _ASM_X86_SMP_H #ifndef __ASSEMBLY__ #include <linux/cpumask.h> #include <asm/percpu.h> #include <asm/thread_info.h> #include <asm/cpumask.h> extern int smp_num_siblings; extern unsigned int num_processors; DECLARE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map); DECLARE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_core_map); DECLARE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_die_map); /* cpus sharing the last level cache: */ DECLARE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_llc_shared_map); DECLARE_PER_CPU_READ_MOSTLY(u16, cpu_llc_id); DECLARE_PER_CPU_READ_MOSTLY(int, cpu_number); static inline struct cpumask *cpu_llc_shared_mask(int cpu) { return per_cpu(cpu_llc_shared_map, cpu); } DECLARE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU_READ_MOSTLY(u32, x86_cpu_to_acpiid); DECLARE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_bios_cpu_apicid); #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) DECLARE_EARLY_PER_CPU_READ_MOSTLY(int, x86_cpu_to_logical_apicid); #endif struct task_struct; struct smp_ops { void (*smp_prepare_boot_cpu)(void); void (*smp_prepare_cpus)(unsigned max_cpus); void (*smp_cpus_done)(unsigned max_cpus); void (*stop_other_cpus)(int wait); void (*crash_stop_other_cpus)(void); void (*smp_send_reschedule)(int cpu); int (*cpu_up)(unsigned cpu, struct task_struct *tidle); int (*cpu_disable)(void); void (*cpu_die)(unsigned int cpu); void (*play_dead)(void); void (*send_call_func_ipi)(const struct cpumask *mask); void (*send_call_func_single_ipi)(int cpu); }; /* Globals due to paravirt */ extern void set_cpu_sibling_map(int cpu); #ifdef CONFIG_SMP extern struct smp_ops smp_ops; static inline void smp_send_stop(void) { smp_ops.stop_other_cpus(0); } static inline void stop_other_cpus(void) { smp_ops.stop_other_cpus(1); } static inline void smp_prepare_boot_cpu(void) { smp_ops.smp_prepare_boot_cpu(); } static inline void smp_prepare_cpus(unsigned int max_cpus) { smp_ops.smp_prepare_cpus(max_cpus); } static inline void smp_cpus_done(unsigned int max_cpus) { smp_ops.smp_cpus_done(max_cpus); } static inline int __cpu_up(unsigned int cpu, struct task_struct *tidle) { return smp_ops.cpu_up(cpu, tidle); } static inline int __cpu_disable(void) { return smp_ops.cpu_disable(); } static inline void __cpu_die(unsigned int cpu) { smp_ops.cpu_die(cpu); } static inline void play_dead(void) { smp_ops.play_dead(); } static inline void smp_send_reschedule(int cpu) { smp_ops.smp_send_reschedule(cpu); } static inline void arch_send_call_function_single_ipi(int cpu) { smp_ops.send_call_func_single_ipi(cpu); } static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask) { smp_ops.send_call_func_ipi(mask); } void cpu_disable_common(void); void native_smp_prepare_boot_cpu(void); void native_smp_prepare_cpus(unsigned int max_cpus); void calculate_max_logical_packages(void); void native_smp_cpus_done(unsigned int max_cpus); int common_cpu_up(unsigned int cpunum, struct task_struct *tidle); int native_cpu_up(unsigned int cpunum, struct task_struct *tidle); int native_cpu_disable(void); int common_cpu_die(unsigned int cpu); void native_cpu_die(unsigned int cpu); void hlt_play_dead(void); void native_play_dead(void); void play_dead_common(void); void wbinvd_on_cpu(int cpu); int wbinvd_on_all_cpus(void); void cond_wakeup_cpu0(void); void native_smp_send_reschedule(int cpu); void native_send_call_func_ipi(const struct cpumask *mask); void native_send_call_func_single_ipi(int cpu); void x86_idle_thread_init(unsigned int cpu, struct task_struct *idle); void smp_store_boot_cpu_info(void); void smp_store_cpu_info(int id); asmlinkage __visible void smp_reboot_interrupt(void); __visible void smp_reschedule_interrupt(struct pt_regs *regs); __visible void smp_call_function_interrupt(struct pt_regs *regs); __visible void smp_call_function_single_interrupt(struct pt_regs *r); #define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu) #define cpu_acpi_id(cpu) per_cpu(x86_cpu_to_acpiid, cpu) /* * This function is needed by all SMP systems. It must _always_ be valid * from the initial startup. We map APIC_BASE very early in page_setup(), * so this is correct in the x86 case. */ #define raw_smp_processor_id() this_cpu_read(cpu_number) #define __smp_processor_id() __this_cpu_read(cpu_number) #ifdef CONFIG_X86_32 extern int safe_smp_processor_id(void); #else # define safe_smp_processor_id() smp_processor_id() #endif #else /* !CONFIG_SMP */ #define wbinvd_on_cpu(cpu) wbinvd() static inline int wbinvd_on_all_cpus(void) { wbinvd(); return 0; } #endif /* CONFIG_SMP */ extern unsigned disabled_cpus; #ifdef CONFIG_X86_LOCAL_APIC extern int hard_smp_processor_id(void); #else /* CONFIG_X86_LOCAL_APIC */ #define hard_smp_processor_id() 0 #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_DEBUG_NMI_SELFTEST extern void nmi_selftest(void); #else #define nmi_selftest() do { } while (0) #endif #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_SMP_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __SOCK_DIAG_H__ #define __SOCK_DIAG_H__ #include <linux/netlink.h> #include <linux/user_namespace.h> #include <net/net_namespace.h> #include <net/sock.h> #include <uapi/linux/sock_diag.h> struct sk_buff; struct nlmsghdr; struct sock; struct sock_diag_handler { __u8 family; int (*dump)(struct sk_buff *skb, struct nlmsghdr *nlh); int (*get_info)(struct sk_buff *skb, struct sock *sk); int (*destroy)(struct sk_buff *skb, struct nlmsghdr *nlh); }; int sock_diag_register(const struct sock_diag_handler *h); void sock_diag_unregister(const struct sock_diag_handler *h); void sock_diag_register_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh)); void sock_diag_unregister_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh)); u64 __sock_gen_cookie(struct sock *sk); static inline u64 sock_gen_cookie(struct sock *sk) { u64 cookie; preempt_disable(); cookie = __sock_gen_cookie(sk); preempt_enable(); return cookie; } int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie); void sock_diag_save_cookie(struct sock *sk, __u32 *cookie); int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr); int sock_diag_put_filterinfo(bool may_report_filterinfo, struct sock *sk, struct sk_buff *skb, int attrtype); static inline enum sknetlink_groups sock_diag_destroy_group(const struct sock *sk) { switch (sk->sk_family) { case AF_INET: if (sk->sk_type == SOCK_RAW) return SKNLGRP_NONE; switch (sk->sk_protocol) { case IPPROTO_TCP: return SKNLGRP_INET_TCP_DESTROY; case IPPROTO_UDP: return SKNLGRP_INET_UDP_DESTROY; default: return SKNLGRP_NONE; } case AF_INET6: if (sk->sk_type == SOCK_RAW) return SKNLGRP_NONE; switch (sk->sk_protocol) { case IPPROTO_TCP: return SKNLGRP_INET6_TCP_DESTROY; case IPPROTO_UDP: return SKNLGRP_INET6_UDP_DESTROY; default: return SKNLGRP_NONE; } default: return SKNLGRP_NONE; } } static inline bool sock_diag_has_destroy_listeners(const struct sock *sk) { const struct net *n = sock_net(sk); const enum sknetlink_groups group = sock_diag_destroy_group(sk); return group != SKNLGRP_NONE && n->diag_nlsk && netlink_has_listeners(n->diag_nlsk, group); } void sock_diag_broadcast_destroy(struct sock *sk); int sock_diag_destroy(struct sock *sk, int err); #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 #undef TRACE_SYSTEM #define TRACE_SYSTEM qdisc #if !defined(_TRACE_QDISC_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_QDISC_H #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/tracepoint.h> #include <linux/ftrace.h> #include <linux/pkt_sched.h> #include <net/sch_generic.h> TRACE_EVENT(qdisc_dequeue, TP_PROTO(struct Qdisc *qdisc, const struct netdev_queue *txq, int packets, struct sk_buff *skb), TP_ARGS(qdisc, txq, packets, skb), TP_STRUCT__entry( __field( struct Qdisc *, qdisc ) __field(const struct netdev_queue *, txq ) __field( int, packets ) __field( void *, skbaddr ) __field( int, ifindex ) __field( u32, handle ) __field( u32, parent ) __field( unsigned long, txq_state) ), /* skb==NULL indicate packets dequeued was 0, even when packets==1 */ TP_fast_assign( __entry->qdisc = qdisc; __entry->txq = txq; __entry->packets = skb ? packets : 0; __entry->skbaddr = skb; __entry->ifindex = txq->dev ? txq->dev->ifindex : 0; __entry->handle = qdisc->handle; __entry->parent = qdisc->parent; __entry->txq_state = txq->state; ), TP_printk("dequeue ifindex=%d qdisc handle=0x%X parent=0x%X txq_state=0x%lX packets=%d skbaddr=%p", __entry->ifindex, __entry->handle, __entry->parent, __entry->txq_state, __entry->packets, __entry->skbaddr ) ); TRACE_EVENT(qdisc_reset, TP_PROTO(struct Qdisc *q), TP_ARGS(q), TP_STRUCT__entry( __string( dev, qdisc_dev(q) ) __string( kind, q->ops->id ) __field( u32, parent ) __field( u32, handle ) ), TP_fast_assign( __assign_str(dev, qdisc_dev(q)); __assign_str(kind, q->ops->id); __entry->parent = q->parent; __entry->handle = q->handle; ), TP_printk("dev=%s kind=%s parent=%x:%x handle=%x:%x", __get_str(dev), __get_str(kind), TC_H_MAJ(__entry->parent) >> 16, TC_H_MIN(__entry->parent), TC_H_MAJ(__entry->handle) >> 16, TC_H_MIN(__entry->handle)) ); TRACE_EVENT(qdisc_destroy, TP_PROTO(struct Qdisc *q), TP_ARGS(q), TP_STRUCT__entry( __string( dev, qdisc_dev(q) ) __string( kind, q->ops->id ) __field( u32, parent ) __field( u32, handle ) ), TP_fast_assign( __assign_str(dev, qdisc_dev(q)); __assign_str(kind, q->ops->id); __entry->parent = q->parent; __entry->handle = q->handle; ), TP_printk("dev=%s kind=%s parent=%x:%x handle=%x:%x", __get_str(dev), __get_str(kind), TC_H_MAJ(__entry->parent) >> 16, TC_H_MIN(__entry->parent), TC_H_MAJ(__entry->handle) >> 16, TC_H_MIN(__entry->handle)) ); TRACE_EVENT(qdisc_create, TP_PROTO(const struct Qdisc_ops *ops, struct net_device *dev, u32 parent), TP_ARGS(ops, dev, parent), TP_STRUCT__entry( __string( dev, dev->name ) __string( kind, ops->id ) __field( u32, parent ) ), TP_fast_assign( __assign_str(dev, dev->name); __assign_str(kind, ops->id); __entry->parent = parent; ), TP_printk("dev=%s kind=%s parent=%x:%x", __get_str(dev), __get_str(kind), TC_H_MAJ(__entry->parent) >> 16, TC_H_MIN(__entry->parent)) ); #endif /* _TRACE_QDISC_H */ /* This part must be outside protection */ #include <trace/define_trace.h>
1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 // SPDX-License-Identifier: GPL-2.0-or-later /* Common capabilities, needed by capability.o. */ #include <linux/capability.h> #include <linux/audit.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/lsm_hooks.h> #include <linux/file.h> #include <linux/mm.h> #include <linux/mman.h> #include <linux/pagemap.h> #include <linux/swap.h> #include <linux/skbuff.h> #include <linux/netlink.h> #include <linux/ptrace.h> #include <linux/xattr.h> #include <linux/hugetlb.h> #include <linux/mount.h> #include <linux/sched.h> #include <linux/prctl.h> #include <linux/securebits.h> #include <linux/user_namespace.h> #include <linux/binfmts.h> #include <linux/personality.h> /* * If a non-root user executes a setuid-root binary in * !secure(SECURE_NOROOT) mode, then we raise capabilities. * However if fE is also set, then the intent is for only * the file capabilities to be applied, and the setuid-root * bit is left on either to change the uid (plausible) or * to get full privilege on a kernel without file capabilities * support. So in that case we do not raise capabilities. * * Warn if that happens, once per boot. */ static void warn_setuid_and_fcaps_mixed(const char *fname) { static int warned; if (!warned) { printk(KERN_INFO "warning: `%s' has both setuid-root and" " effective capabilities. Therefore not raising all" " capabilities.\n", fname); warned = 1; } } /** * cap_capable - Determine whether a task has a particular effective capability * @cred: The credentials to use * @ns: The user namespace in which we need the capability * @cap: The capability to check for * @opts: Bitmask of options defined in include/linux/security.h * * Determine whether the nominated task has the specified capability amongst * its effective set, returning 0 if it does, -ve if it does not. * * NOTE WELL: cap_has_capability() cannot be used like the kernel's capable() * and has_capability() functions. That is, it has the reverse semantics: * cap_has_capability() returns 0 when a task has a capability, but the * kernel's capable() and has_capability() returns 1 for this case. */ int cap_capable(const struct cred *cred, struct user_namespace *targ_ns, int cap, unsigned int opts) { struct user_namespace *ns = targ_ns; /* See if cred has the capability in the target user namespace * by examining the target user namespace and all of the target * user namespace's parents. */ for (;;) { /* Do we have the necessary capabilities? */ if (ns == cred->user_ns) return cap_raised(cred->cap_effective, cap) ? 0 : -EPERM; /* * If we're already at a lower level than we're looking for, * we're done searching. */ if (ns->level <= cred->user_ns->level) return -EPERM; /* * The owner of the user namespace in the parent of the * user namespace has all caps. */ if ((ns->parent == cred->user_ns) && uid_eq(ns->owner, cred->euid)) return 0; /* * If you have a capability in a parent user ns, then you have * it over all children user namespaces as well. */ ns = ns->parent; } /* We never get here */ } /** * cap_settime - Determine whether the current process may set the system clock * @ts: The time to set * @tz: The timezone to set * * Determine whether the current process may set the system clock and timezone * information, returning 0 if permission granted, -ve if denied. */ int cap_settime(const struct timespec64 *ts, const struct timezone *tz) { if (!capable(CAP_SYS_TIME)) return -EPERM; return 0; } /** * cap_ptrace_access_check - Determine whether the current process may access * another * @child: The process to be accessed * @mode: The mode of attachment. * * If we are in the same or an ancestor user_ns and have all the target * task's capabilities, then ptrace access is allowed. * If we have the ptrace capability to the target user_ns, then ptrace * access is allowed. * Else denied. * * Determine whether a process may access another, returning 0 if permission * granted, -ve if denied. */ int cap_ptrace_access_check(struct task_struct *child, unsigned int mode) { int ret = 0; const struct cred *cred, *child_cred; const kernel_cap_t *caller_caps; rcu_read_lock(); cred = current_cred(); child_cred = __task_cred(child); if (mode & PTRACE_MODE_FSCREDS) caller_caps = &cred->cap_effective; else caller_caps = &cred->cap_permitted; if (cred->user_ns == child_cred->user_ns && cap_issubset(child_cred->cap_permitted, *caller_caps)) goto out; if (ns_capable(child_cred->user_ns, CAP_SYS_PTRACE)) goto out; ret = -EPERM; out: rcu_read_unlock(); return ret; } /** * cap_ptrace_traceme - Determine whether another process may trace the current * @parent: The task proposed to be the tracer * * If parent is in the same or an ancestor user_ns and has all current's * capabilities, then ptrace access is allowed. * If parent has the ptrace capability to current's user_ns, then ptrace * access is allowed. * Else denied. * * Determine whether the nominated task is permitted to trace the current * process, returning 0 if permission is granted, -ve if denied. */ int cap_ptrace_traceme(struct task_struct *parent) { int ret = 0; const struct cred *cred, *child_cred; rcu_read_lock(); cred = __task_cred(parent); child_cred = current_cred(); if (cred->user_ns == child_cred->user_ns && cap_issubset(child_cred->cap_permitted, cred->cap_permitted)) goto out; if (has_ns_capability(parent, child_cred->user_ns, CAP_SYS_PTRACE)) goto out; ret = -EPERM; out: rcu_read_unlock(); return ret; } /** * cap_capget - Retrieve a task's capability sets * @target: The task from which to retrieve the capability sets * @effective: The place to record the effective set * @inheritable: The place to record the inheritable set * @permitted: The place to record the permitted set * * This function retrieves the capabilities of the nominated task and returns * them to the caller. */ int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted) { const struct cred *cred; /* Derived from kernel/capability.c:sys_capget. */ rcu_read_lock(); cred = __task_cred(target); *effective = cred->cap_effective; *inheritable = cred->cap_inheritable; *permitted = cred->cap_permitted; rcu_read_unlock(); return 0; } /* * Determine whether the inheritable capabilities are limited to the old * permitted set. Returns 1 if they are limited, 0 if they are not. */ static inline int cap_inh_is_capped(void) { /* they are so limited unless the current task has the CAP_SETPCAP * capability */ if (cap_capable(current_cred(), current_cred()->user_ns, CAP_SETPCAP, CAP_OPT_NONE) == 0) return 0; return 1; } /** * cap_capset - Validate and apply proposed changes to current's capabilities * @new: The proposed new credentials; alterations should be made here * @old: The current task's current credentials * @effective: A pointer to the proposed new effective capabilities set * @inheritable: A pointer to the proposed new inheritable capabilities set * @permitted: A pointer to the proposed new permitted capabilities set * * This function validates and applies a proposed mass change to the current * process's capability sets. The changes are made to the proposed new * credentials, and assuming no error, will be committed by the caller of LSM. */ int cap_capset(struct cred *new, const struct cred *old, const kernel_cap_t *effective, const kernel_cap_t *inheritable, const kernel_cap_t *permitted) { if (cap_inh_is_capped() && !cap_issubset(*inheritable, cap_combine(old->cap_inheritable, old->cap_permitted))) /* incapable of using this inheritable set */ return -EPERM; if (!cap_issubset(*inheritable, cap_combine(old->cap_inheritable, old->cap_bset))) /* no new pI capabilities outside bounding set */ return -EPERM; /* verify restrictions on target's new Permitted set */ if (!cap_issubset(*permitted, old->cap_permitted)) return -EPERM; /* verify the _new_Effective_ is a subset of the _new_Permitted_ */ if (!cap_issubset(*effective, *permitted)) return -EPERM; new->cap_effective = *effective; new->cap_inheritable = *inheritable; new->cap_permitted = *permitted; /* * Mask off ambient bits that are no longer both permitted and * inheritable. */ new->cap_ambient = cap_intersect(new->cap_ambient, cap_intersect(*permitted, *inheritable)); if (WARN_ON(!cap_ambient_invariant_ok(new))) return -EINVAL; return 0; } /** * cap_inode_need_killpriv - Determine if inode change affects privileges * @dentry: The inode/dentry in being changed with change marked ATTR_KILL_PRIV * * Determine if an inode having a change applied that's marked ATTR_KILL_PRIV * affects the security markings on that inode, and if it is, should * inode_killpriv() be invoked or the change rejected. * * Returns 1 if security.capability has a value, meaning inode_killpriv() * is required, 0 otherwise, meaning inode_killpriv() is not required. */ int cap_inode_need_killpriv(struct dentry *dentry) { struct inode *inode = d_backing_inode(dentry); int error; error = __vfs_getxattr(dentry, inode, XATTR_NAME_CAPS, NULL, 0); return error > 0; } /** * cap_inode_killpriv - Erase the security markings on an inode * @dentry: The inode/dentry to alter * * Erase the privilege-enhancing security markings on an inode. * * Returns 0 if successful, -ve on error. */ int cap_inode_killpriv(struct dentry *dentry) { int error; error = __vfs_removexattr(dentry, XATTR_NAME_CAPS); if (error == -EOPNOTSUPP) error = 0; return error; } static bool rootid_owns_currentns(kuid_t kroot) { struct user_namespace *ns; if (!uid_valid(kroot)) return false; for (ns = current_user_ns(); ; ns = ns->parent) { if (from_kuid(ns, kroot) == 0) return true; if (ns == &init_user_ns) break; } return false; } static __u32 sansflags(__u32 m) { return m & ~VFS_CAP_FLAGS_EFFECTIVE; } static bool is_v2header(size_t size, const struct vfs_cap_data *cap) { if (size != XATTR_CAPS_SZ_2) return false; return sansflags(le32_to_cpu(cap->magic_etc)) == VFS_CAP_REVISION_2; } static bool is_v3header(size_t size, const struct vfs_cap_data *cap) { if (size != XATTR_CAPS_SZ_3) return false; return sansflags(le32_to_cpu(cap->magic_etc)) == VFS_CAP_REVISION_3; } /* * getsecurity: We are called for security.* before any attempt to read the * xattr from the inode itself. * * This gives us a chance to read the on-disk value and convert it. If we * return -EOPNOTSUPP, then vfs_getxattr() will call the i_op handler. * * Note we are not called by vfs_getxattr_alloc(), but that is only called * by the integrity subsystem, which really wants the unconverted values - * so that's good. */ int cap_inode_getsecurity(struct inode *inode, const char *name, void **buffer, bool alloc) { int size, ret; kuid_t kroot; u32 nsmagic, magic; uid_t root, mappedroot; char *tmpbuf = NULL; struct vfs_cap_data *cap; struct vfs_ns_cap_data *nscap = NULL; struct dentry *dentry; struct user_namespace *fs_ns; if (strcmp(name, "capability") != 0) return -EOPNOTSUPP; dentry = d_find_any_alias(inode); if (!dentry) return -EINVAL; size = sizeof(struct vfs_ns_cap_data); ret = (int) vfs_getxattr_alloc(dentry, XATTR_NAME_CAPS, &tmpbuf, size, GFP_NOFS); dput(dentry); if (ret < 0 || !tmpbuf) return ret; fs_ns = inode->i_sb->s_user_ns; cap = (struct vfs_cap_data *) tmpbuf; if (is_v2header((size_t) ret, cap)) { root = 0; } else if (is_v3header((size_t) ret, cap)) { nscap = (struct vfs_ns_cap_data *) tmpbuf; root = le32_to_cpu(nscap->rootid); } else { size = -EINVAL; goto out_free; } kroot = make_kuid(fs_ns, root); /* If the root kuid maps to a valid uid in current ns, then return * this as a nscap. */ mappedroot = from_kuid(current_user_ns(), kroot); if (mappedroot != (uid_t)-1 && mappedroot != (uid_t)0) { size = sizeof(struct vfs_ns_cap_data); if (alloc) { if (!nscap) { /* v2 -> v3 conversion */ nscap = kzalloc(size, GFP_ATOMIC); if (!nscap) { size = -ENOMEM; goto out_free; } nsmagic = VFS_CAP_REVISION_3; magic = le32_to_cpu(cap->magic_etc); if (magic & VFS_CAP_FLAGS_EFFECTIVE) nsmagic |= VFS_CAP_FLAGS_EFFECTIVE; memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32); nscap->magic_etc = cpu_to_le32(nsmagic); } else { /* use allocated v3 buffer */ tmpbuf = NULL; } nscap->rootid = cpu_to_le32(mappedroot); *buffer = nscap; } goto out_free; } if (!rootid_owns_currentns(kroot)) { size = -EOVERFLOW; goto out_free; } /* This comes from a parent namespace. Return as a v2 capability */ size = sizeof(struct vfs_cap_data); if (alloc) { if (nscap) { /* v3 -> v2 conversion */ cap = kzalloc(size, GFP_ATOMIC); if (!cap) { size = -ENOMEM; goto out_free; } magic = VFS_CAP_REVISION_2; nsmagic = le32_to_cpu(nscap->magic_etc); if (nsmagic & VFS_CAP_FLAGS_EFFECTIVE) magic |= VFS_CAP_FLAGS_EFFECTIVE; memcpy(&cap->data, &nscap->data, sizeof(__le32) * 2 * VFS_CAP_U32); cap->magic_etc = cpu_to_le32(magic); } else { /* use unconverted v2 */ tmpbuf = NULL; } *buffer = cap; } out_free: kfree(tmpbuf); return size; } static kuid_t rootid_from_xattr(const void *value, size_t size, struct user_namespace *task_ns) { const struct vfs_ns_cap_data *nscap = value; uid_t rootid = 0; if (size == XATTR_CAPS_SZ_3) rootid = le32_to_cpu(nscap->rootid); return make_kuid(task_ns, rootid); } static bool validheader(size_t size, const struct vfs_cap_data *cap) { return is_v2header(size, cap) || is_v3header(size, cap); } /* * User requested a write of security.capability. If needed, update the * xattr to change from v2 to v3, or to fixup the v3 rootid. * * If all is ok, we return the new size, on error return < 0. */ int cap_convert_nscap(struct dentry *dentry, void **ivalue, size_t size) { struct vfs_ns_cap_data *nscap; uid_t nsrootid; const struct vfs_cap_data *cap = *ivalue; __u32 magic, nsmagic; struct inode *inode = d_backing_inode(dentry); struct user_namespace *task_ns = current_user_ns(), *fs_ns = inode->i_sb->s_user_ns; kuid_t rootid; size_t newsize; if (!*ivalue) return -EINVAL; if (!validheader(size, cap)) return -EINVAL; if (!capable_wrt_inode_uidgid(inode, CAP_SETFCAP)) return -EPERM; if (size == XATTR_CAPS_SZ_2) if (ns_capable(inode->i_sb->s_user_ns, CAP_SETFCAP)) /* user is privileged, just write the v2 */ return size; rootid = rootid_from_xattr(*ivalue, size, task_ns); if (!uid_valid(rootid)) return -EINVAL; nsrootid = from_kuid(fs_ns, rootid); if (nsrootid == -1) return -EINVAL; newsize = sizeof(struct vfs_ns_cap_data); nscap = kmalloc(newsize, GFP_ATOMIC); if (!nscap) return -ENOMEM; nscap->rootid = cpu_to_le32(nsrootid); nsmagic = VFS_CAP_REVISION_3; magic = le32_to_cpu(cap->magic_etc); if (magic & VFS_CAP_FLAGS_EFFECTIVE) nsmagic |= VFS_CAP_FLAGS_EFFECTIVE; nscap->magic_etc = cpu_to_le32(nsmagic); memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32); kvfree(*ivalue); *ivalue = nscap; return newsize; } /* * Calculate the new process capability sets from the capability sets attached * to a file. */ static inline int bprm_caps_from_vfs_caps(struct cpu_vfs_cap_data *caps, struct linux_binprm *bprm, bool *effective, bool *has_fcap) { struct cred *new = bprm->cred; unsigned i; int ret = 0; if (caps->magic_etc & VFS_CAP_FLAGS_EFFECTIVE) *effective = true; if (caps->magic_etc & VFS_CAP_REVISION_MASK) *has_fcap = true; CAP_FOR_EACH_U32(i) { __u32 permitted = caps->permitted.cap[i]; __u32 inheritable = caps->inheritable.cap[i]; /* * pP' = (X & fP) | (pI & fI) * The addition of pA' is handled later. */ new->cap_permitted.cap[i] = (new->cap_bset.cap[i] & permitted) | (new->cap_inheritable.cap[i] & inheritable); if (permitted & ~new->cap_permitted.cap[i]) /* insufficient to execute correctly */ ret = -EPERM; } /* * For legacy apps, with no internal support for recognizing they * do not have enough capabilities, we return an error if they are * missing some "forced" (aka file-permitted) capabilities. */ return *effective ? ret : 0; } /* * Extract the on-exec-apply capability sets for an executable file. */ int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps) { struct inode *inode = d_backing_inode(dentry); __u32 magic_etc; unsigned tocopy, i; int size; struct vfs_ns_cap_data data, *nscaps = &data; struct vfs_cap_data *caps = (struct vfs_cap_data *) &data; kuid_t rootkuid; struct user_namespace *fs_ns; memset(cpu_caps, 0, sizeof(struct cpu_vfs_cap_data)); if (!inode) return -ENODATA; fs_ns = inode->i_sb->s_user_ns; size = __vfs_getxattr((struct dentry *)dentry, inode, XATTR_NAME_CAPS, &data, XATTR_CAPS_SZ); if (size == -ENODATA || size == -EOPNOTSUPP) /* no data, that's ok */ return -ENODATA; if (size < 0) return size; if (size < sizeof(magic_etc)) return -EINVAL; cpu_caps->magic_etc = magic_etc = le32_to_cpu(caps->magic_etc); rootkuid = make_kuid(fs_ns, 0); switch (magic_etc & VFS_CAP_REVISION_MASK) { case VFS_CAP_REVISION_1: if (size != XATTR_CAPS_SZ_1) return -EINVAL; tocopy = VFS_CAP_U32_1; break; case VFS_CAP_REVISION_2: if (size != XATTR_CAPS_SZ_2) return -EINVAL; tocopy = VFS_CAP_U32_2; break; case VFS_CAP_REVISION_3: if (size != XATTR_CAPS_SZ_3) return -EINVAL; tocopy = VFS_CAP_U32_3; rootkuid = make_kuid(fs_ns, le32_to_cpu(nscaps->rootid)); break; default: return -EINVAL; } /* Limit the caps to the mounter of the filesystem * or the more limited uid specified in the xattr. */ if (!rootid_owns_currentns(rootkuid)) return -ENODATA; CAP_FOR_EACH_U32(i) { if (i >= tocopy) break; cpu_caps->permitted.cap[i] = le32_to_cpu(caps->data[i].permitted); cpu_caps->inheritable.cap[i] = le32_to_cpu(caps->data[i].inheritable); } cpu_caps->permitted.cap[CAP_LAST_U32] &= CAP_LAST_U32_VALID_MASK; cpu_caps->inheritable.cap[CAP_LAST_U32] &= CAP_LAST_U32_VALID_MASK; cpu_caps->rootid = rootkuid; return 0; } /* * Attempt to get the on-exec apply capability sets for an executable file from * its xattrs and, if present, apply them to the proposed credentials being * constructed by execve(). */ static int get_file_caps(struct linux_binprm *bprm, struct file *file, bool *effective, bool *has_fcap) { int rc = 0; struct cpu_vfs_cap_data vcaps; cap_clear(bprm->cred->cap_permitted); if (!file_caps_enabled) return 0; if (!mnt_may_suid(file->f_path.mnt)) return 0; /* * This check is redundant with mnt_may_suid() but is kept to make * explicit that capability bits are limited to s_user_ns and its * descendants. */ if (!current_in_userns(file->f_path.mnt->mnt_sb->s_user_ns)) return 0; rc = get_vfs_caps_from_disk(file->f_path.dentry, &vcaps); if (rc < 0) { if (rc == -EINVAL) printk(KERN_NOTICE "Invalid argument reading file caps for %s\n", bprm->filename); else if (rc == -ENODATA) rc = 0; goto out; } rc = bprm_caps_from_vfs_caps(&vcaps, bprm, effective, has_fcap); out: if (rc) cap_clear(bprm->cred->cap_permitted); return rc; } static inline bool root_privileged(void) { return !issecure(SECURE_NOROOT); } static inline bool __is_real(kuid_t uid, struct cred *cred) { return uid_eq(cred->uid, uid); } static inline bool __is_eff(kuid_t uid, struct cred *cred) { return uid_eq(cred->euid, uid); } static inline bool __is_suid(kuid_t uid, struct cred *cred) { return !__is_real(uid, cred) && __is_eff(uid, cred); } /* * handle_privileged_root - Handle case of privileged root * @bprm: The execution parameters, including the proposed creds * @has_fcap: Are any file capabilities set? * @effective: Do we have effective root privilege? * @root_uid: This namespace' root UID WRT initial USER namespace * * Handle the case where root is privileged and hasn't been neutered by * SECURE_NOROOT. If file capabilities are set, they won't be combined with * set UID root and nothing is changed. If we are root, cap_permitted is * updated. If we have become set UID root, the effective bit is set. */ static void handle_privileged_root(struct linux_binprm *bprm, bool has_fcap, bool *effective, kuid_t root_uid) { const struct cred *old = current_cred(); struct cred *new = bprm->cred; if (!root_privileged()) return; /* * If the legacy file capability is set, then don't set privs * for a setuid root binary run by a non-root user. Do set it * for a root user just to cause least surprise to an admin. */ if (has_fcap && __is_suid(root_uid, new)) { warn_setuid_and_fcaps_mixed(bprm->filename); return; } /* * To support inheritance of root-permissions and suid-root * executables under compatibility mode, we override the * capability sets for the file. */ if (__is_eff(root_uid, new) || __is_real(root_uid, new)) { /* pP' = (cap_bset & ~0) | (pI & ~0) */ new->cap_permitted = cap_combine(old->cap_bset, old->cap_inheritable); } /* * If only the real uid is 0, we do not set the effective bit. */ if (__is_eff(root_uid, new)) *effective = true; } #define __cap_gained(field, target, source) \ !cap_issubset(target->cap_##field, source->cap_##field) #define __cap_grew(target, source, cred) \ !cap_issubset(cred->cap_##target, cred->cap_##source) #define __cap_full(field, cred) \ cap_issubset(CAP_FULL_SET, cred->cap_##field) static inline bool __is_setuid(struct cred *new, const struct cred *old) { return !uid_eq(new->euid, old->uid); } static inline bool __is_setgid(struct cred *new, const struct cred *old) { return !gid_eq(new->egid, old->gid); } /* * 1) Audit candidate if current->cap_effective is set * * We do not bother to audit if 3 things are true: * 1) cap_effective has all caps * 2) we became root *OR* are were already root * 3) root is supposed to have all caps (SECURE_NOROOT) * Since this is just a normal root execing a process. * * Number 1 above might fail if you don't have a full bset, but I think * that is interesting information to audit. * * A number of other conditions require logging: * 2) something prevented setuid root getting all caps * 3) non-setuid root gets fcaps * 4) non-setuid root gets ambient */ static inline bool nonroot_raised_pE(struct cred *new, const struct cred *old, kuid_t root, bool has_fcap) { bool ret = false; if ((__cap_grew(effective, ambient, new) && !(__cap_full(effective, new) && (__is_eff(root, new) || __is_real(root, new)) && root_privileged())) || (root_privileged() && __is_suid(root, new) && !__cap_full(effective, new)) || (!__is_setuid(new, old) && ((has_fcap && __cap_gained(permitted, new, old)) || __cap_gained(ambient, new, old)))) ret = true; return ret; } /** * cap_bprm_creds_from_file - Set up the proposed credentials for execve(). * @bprm: The execution parameters, including the proposed creds * @file: The file to pull the credentials from * * Set up the proposed credentials for a new execution context being * constructed by execve(). The proposed creds in @bprm->cred is altered, * which won't take effect immediately. Returns 0 if successful, -ve on error. */ int cap_bprm_creds_from_file(struct linux_binprm *bprm, struct file *file) { /* Process setpcap binaries and capabilities for uid 0 */ const struct cred *old = current_cred(); struct cred *new = bprm->cred; bool effective = false, has_fcap = false, is_setid; int ret; kuid_t root_uid; if (WARN_ON(!cap_ambient_invariant_ok(old))) return -EPERM; ret = get_file_caps(bprm, file, &effective, &has_fcap); if (ret < 0) return ret; root_uid = make_kuid(new->user_ns, 0); handle_privileged_root(bprm, has_fcap, &effective, root_uid); /* if we have fs caps, clear dangerous personality flags */ if (__cap_gained(permitted, new, old)) bprm->per_clear |= PER_CLEAR_ON_SETID; /* Don't let someone trace a set[ug]id/setpcap binary with the revised * credentials unless they have the appropriate permit. * * In addition, if NO_NEW_PRIVS, then ensure we get no new privs. */ is_setid = __is_setuid(new, old) || __is_setgid(new, old); if ((is_setid || __cap_gained(permitted, new, old)) && ((bprm->unsafe & ~LSM_UNSAFE_PTRACE) || !ptracer_capable(current, new->user_ns))) { /* downgrade; they get no more than they had, and maybe less */ if (!ns_capable(new->user_ns, CAP_SETUID) || (bprm->unsafe & LSM_UNSAFE_NO_NEW_PRIVS)) { new->euid = new->uid; new->egid = new->gid; } new->cap_permitted = cap_intersect(new->cap_permitted, old->cap_permitted); } new->suid = new->fsuid = new->euid; new->sgid = new->fsgid = new->egid; /* File caps or setid cancels ambient. */ if (has_fcap || is_setid) cap_clear(new->cap_ambient); /* * Now that we've computed pA', update pP' to give: * pP' = (X & fP) | (pI & fI) | pA' */ new->cap_permitted = cap_combine(new->cap_permitted, new->cap_ambient); /* * Set pE' = (fE ? pP' : pA'). Because pA' is zero if fE is set, * this is the same as pE' = (fE ? pP' : 0) | pA'. */ if (effective) new->cap_effective = new->cap_permitted; else new->cap_effective = new->cap_ambient; if (WARN_ON(!cap_ambient_invariant_ok(new))) return -EPERM; if (nonroot_raised_pE(new, old, root_uid, has_fcap)) { ret = audit_log_bprm_fcaps(bprm, new, old); if (ret < 0) return ret; } new->securebits &= ~issecure_mask(SECURE_KEEP_CAPS); if (WARN_ON(!cap_ambient_invariant_ok(new))) return -EPERM; /* Check for privilege-elevated exec. */ if (is_setid || (!__is_real(root_uid, new) && (effective || __cap_grew(permitted, ambient, new)))) bprm->secureexec = 1; return 0; } /** * cap_inode_setxattr - Determine whether an xattr may be altered * @dentry: The inode/dentry being altered * @name: The name of the xattr to be changed * @value: The value that the xattr will be changed to * @size: The size of value * @flags: The replacement flag * * Determine whether an xattr may be altered or set on an inode, returning 0 if * permission is granted, -ve if denied. * * This is used to make sure security xattrs don't get updated or set by those * who aren't privileged to do so. */ int cap_inode_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags) { struct user_namespace *user_ns = dentry->d_sb->s_user_ns; /* Ignore non-security xattrs */ if (strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) != 0) return 0; /* * For XATTR_NAME_CAPS the check will be done in * cap_convert_nscap(), called by setxattr() */ if (strcmp(name, XATTR_NAME_CAPS) == 0) return 0; if (!ns_capable(user_ns, CAP_SYS_ADMIN)) return -EPERM; return 0; } /** * cap_inode_removexattr - Determine whether an xattr may be removed * @dentry: The inode/dentry being altered * @name: The name of the xattr to be changed * * Determine whether an xattr may be removed from an inode, returning 0 if * permission is granted, -ve if denied. * * This is used to make sure security xattrs don't get removed by those who * aren't privileged to remove them. */ int cap_inode_removexattr(struct dentry *dentry, const char *name) { struct user_namespace *user_ns = dentry->d_sb->s_user_ns; /* Ignore non-security xattrs */ if (strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) != 0) return 0; if (strcmp(name, XATTR_NAME_CAPS) == 0) { /* security.capability gets namespaced */ struct inode *inode = d_backing_inode(dentry); if (!inode) return -EINVAL; if (!capable_wrt_inode_uidgid(inode, CAP_SETFCAP)) return -EPERM; return 0; } if (!ns_capable(user_ns, CAP_SYS_ADMIN)) return -EPERM; return 0; } /* * cap_emulate_setxuid() fixes the effective / permitted capabilities of * a process after a call to setuid, setreuid, or setresuid. * * 1) When set*uiding _from_ one of {r,e,s}uid == 0 _to_ all of * {r,e,s}uid != 0, the permitted and effective capabilities are * cleared. * * 2) When set*uiding _from_ euid == 0 _to_ euid != 0, the effective * capabilities of the process are cleared. * * 3) When set*uiding _from_ euid != 0 _to_ euid == 0, the effective * capabilities are set to the permitted capabilities. * * fsuid is handled elsewhere. fsuid == 0 and {r,e,s}uid!= 0 should * never happen. * * -astor * * cevans - New behaviour, Oct '99 * A process may, via prctl(), elect to keep its capabilities when it * calls setuid() and switches away from uid==0. Both permitted and * effective sets will be retained. * Without this change, it was impossible for a daemon to drop only some * of its privilege. The call to setuid(!=0) would drop all privileges! * Keeping uid 0 is not an option because uid 0 owns too many vital * files.. * Thanks to Olaf Kirch and Peter Benie for spotting this. */ static inline void cap_emulate_setxuid(struct cred *new, const struct cred *old) { kuid_t root_uid = make_kuid(old->user_ns, 0); if ((uid_eq(old->uid, root_uid) || uid_eq(old->euid, root_uid) || uid_eq(old->suid, root_uid)) && (!uid_eq(new->uid, root_uid) && !uid_eq(new->euid, root_uid) && !uid_eq(new->suid, root_uid))) { if (!issecure(SECURE_KEEP_CAPS)) { cap_clear(new->cap_permitted); cap_clear(new->cap_effective); } /* * Pre-ambient programs expect setresuid to nonroot followed * by exec to drop capabilities. We should make sure that * this remains the case. */ cap_clear(new->cap_ambient); } if (uid_eq(old->euid, root_uid) && !uid_eq(new->euid, root_uid)) cap_clear(new->cap_effective); if (!uid_eq(old->euid, root_uid) && uid_eq(new->euid, root_uid)) new->cap_effective = new->cap_permitted; } /** * cap_task_fix_setuid - Fix up the results of setuid() call * @new: The proposed credentials * @old: The current task's current credentials * @flags: Indications of what has changed * * Fix up the results of setuid() call before the credential changes are * actually applied, returning 0 to grant the changes, -ve to deny them. */ int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags) { switch (flags) { case LSM_SETID_RE: case LSM_SETID_ID: case LSM_SETID_RES: /* juggle the capabilities to follow [RES]UID changes unless * otherwise suppressed */ if (!issecure(SECURE_NO_SETUID_FIXUP)) cap_emulate_setxuid(new, old); break; case LSM_SETID_FS: /* juggle the capabilties to follow FSUID changes, unless * otherwise suppressed * * FIXME - is fsuser used for all CAP_FS_MASK capabilities? * if not, we might be a bit too harsh here. */ if (!issecure(SECURE_NO_SETUID_FIXUP)) { kuid_t root_uid = make_kuid(old->user_ns, 0); if (uid_eq(old->fsuid, root_uid) && !uid_eq(new->fsuid, root_uid)) new->cap_effective = cap_drop_fs_set(new->cap_effective); if (!uid_eq(old->fsuid, root_uid) && uid_eq(new->fsuid, root_uid)) new->cap_effective = cap_raise_fs_set(new->cap_effective, new->cap_permitted); } break; default: return -EINVAL; } return 0; } /* * Rationale: code calling task_setscheduler, task_setioprio, and * task_setnice, assumes that * . if capable(cap_sys_nice), then those actions should be allowed * . if not capable(cap_sys_nice), but acting on your own processes, * then those actions should be allowed * This is insufficient now since you can call code without suid, but * yet with increased caps. * So we check for increased caps on the target process. */ static int cap_safe_nice(struct task_struct *p) { int is_subset, ret = 0; rcu_read_lock(); is_subset = cap_issubset(__task_cred(p)->cap_permitted, current_cred()->cap_permitted); if (!is_subset && !ns_capable(__task_cred(p)->user_ns, CAP_SYS_NICE)) ret = -EPERM; rcu_read_unlock(); return ret; } /** * cap_task_setscheduler - Detemine if scheduler policy change is permitted * @p: The task to affect * * Detemine if the requested scheduler policy change is permitted for the * specified task, returning 0 if permission is granted, -ve if denied. */ int cap_task_setscheduler(struct task_struct *p) { return cap_safe_nice(p); } /** * cap_task_ioprio - Detemine if I/O priority change is permitted * @p: The task to affect * @ioprio: The I/O priority to set * * Detemine if the requested I/O priority change is permitted for the specified * task, returning 0 if permission is granted, -ve if denied. */ int cap_task_setioprio(struct task_struct *p, int ioprio) { return cap_safe_nice(p); } /** * cap_task_ioprio - Detemine if task priority change is permitted * @p: The task to affect * @nice: The nice value to set * * Detemine if the requested task priority change is permitted for the * specified task, returning 0 if permission is granted, -ve if denied. */ int cap_task_setnice(struct task_struct *p, int nice) { return cap_safe_nice(p); } /* * Implement PR_CAPBSET_DROP. Attempt to remove the specified capability from * the current task's bounding set. Returns 0 on success, -ve on error. */ static int cap_prctl_drop(unsigned long cap) { struct cred *new; if (!ns_capable(current_user_ns(), CAP_SETPCAP)) return -EPERM; if (!cap_valid(cap)) return -EINVAL; new = prepare_creds(); if (!new) return -ENOMEM; cap_lower(new->cap_bset, cap); return commit_creds(new); } /** * cap_task_prctl - Implement process control functions for this security module * @option: The process control function requested * @arg2, @arg3, @arg4, @arg5: The argument data for this function * * Allow process control functions (sys_prctl()) to alter capabilities; may * also deny access to other functions not otherwise implemented here. * * Returns 0 or +ve on success, -ENOSYS if this function is not implemented * here, other -ve on error. If -ENOSYS is returned, sys_prctl() and other LSM * modules will consider performing the function. */ int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { const struct cred *old = current_cred(); struct cred *new; switch (option) { case PR_CAPBSET_READ: if (!cap_valid(arg2)) return -EINVAL; return !!cap_raised(old->cap_bset, arg2); case PR_CAPBSET_DROP: return cap_prctl_drop(arg2); /* * The next four prctl's remain to assist with transitioning a * system from legacy UID=0 based privilege (when filesystem * capabilities are not in use) to a system using filesystem * capabilities only - as the POSIX.1e draft intended. * * Note: * * PR_SET_SECUREBITS = * issecure_mask(SECURE_KEEP_CAPS_LOCKED) * | issecure_mask(SECURE_NOROOT) * | issecure_mask(SECURE_NOROOT_LOCKED) * | issecure_mask(SECURE_NO_SETUID_FIXUP) * | issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED) * * will ensure that the current process and all of its * children will be locked into a pure * capability-based-privilege environment. */ case PR_SET_SECUREBITS: if ((((old->securebits & SECURE_ALL_LOCKS) >> 1) & (old->securebits ^ arg2)) /*[1]*/ || ((old->securebits & SECURE_ALL_LOCKS & ~arg2)) /*[2]*/ || (arg2 & ~(SECURE_ALL_LOCKS | SECURE_ALL_BITS)) /*[3]*/ || (cap_capable(current_cred(), current_cred()->user_ns, CAP_SETPCAP, CAP_OPT_NONE) != 0) /*[4]*/ /* * [1] no changing of bits that are locked * [2] no unlocking of locks * [3] no setting of unsupported bits * [4] doing anything requires privilege (go read about * the "sendmail capabilities bug") */ ) /* cannot change a locked bit */ return -EPERM; new = prepare_creds(); if (!new) return -ENOMEM; new->securebits = arg2; return commit_creds(new); case PR_GET_SECUREBITS: return old->securebits; case PR_GET_KEEPCAPS: return !!issecure(SECURE_KEEP_CAPS); case PR_SET_KEEPCAPS: if (arg2 > 1) /* Note, we rely on arg2 being unsigned here */ return -EINVAL; if (issecure(SECURE_KEEP_CAPS_LOCKED)) return -EPERM; new = prepare_creds(); if (!new) return -ENOMEM; if (arg2) new->securebits |= issecure_mask(SECURE_KEEP_CAPS); else new->securebits &= ~issecure_mask(SECURE_KEEP_CAPS); return commit_creds(new); case PR_CAP_AMBIENT: if (arg2 == PR_CAP_AMBIENT_CLEAR_ALL) { if (arg3 | arg4 | arg5) return -EINVAL; new = prepare_creds(); if (!new) return -ENOMEM; cap_clear(new->cap_ambient); return commit_creds(new); } if (((!cap_valid(arg3)) | arg4 | arg5)) return -EINVAL; if (arg2 == PR_CAP_AMBIENT_IS_SET) { return !!cap_raised(current_cred()->cap_ambient, arg3); } else if (arg2 != PR_CAP_AMBIENT_RAISE && arg2 != PR_CAP_AMBIENT_LOWER) { return -EINVAL; } else { if (arg2 == PR_CAP_AMBIENT_RAISE && (!cap_raised(current_cred()->cap_permitted, arg3) || !cap_raised(current_cred()->cap_inheritable, arg3) || issecure(SECURE_NO_CAP_AMBIENT_RAISE))) return -EPERM; new = prepare_creds(); if (!new) return -ENOMEM; if (arg2 == PR_CAP_AMBIENT_RAISE) cap_raise(new->cap_ambient, arg3); else cap_lower(new->cap_ambient, arg3); return commit_creds(new); } default: /* No functionality available - continue with default */ return -ENOSYS; } } /** * cap_vm_enough_memory - Determine whether a new virtual mapping is permitted * @mm: The VM space in which the new mapping is to be made * @pages: The size of the mapping * * Determine whether the allocation of a new virtual mapping by the current * task is permitted, returning 1 if permission is granted, 0 if not. */ int cap_vm_enough_memory(struct mm_struct *mm, long pages) { int cap_sys_admin = 0; if (cap_capable(current_cred(), &init_user_ns, CAP_SYS_ADMIN, CAP_OPT_NOAUDIT) == 0) cap_sys_admin = 1; return cap_sys_admin; } /* * cap_mmap_addr - check if able to map given addr * @addr: address attempting to be mapped * * If the process is attempting to map memory below dac_mmap_min_addr they need * CAP_SYS_RAWIO. The other parameters to this function are unused by the * capability security module. Returns 0 if this mapping should be allowed * -EPERM if not. */ int cap_mmap_addr(unsigned long addr) { int ret = 0; if (addr < dac_mmap_min_addr) { ret = cap_capable(current_cred(), &init_user_ns, CAP_SYS_RAWIO, CAP_OPT_NONE); /* set PF_SUPERPRIV if it turns out we allow the low mmap */ if (ret == 0) current->flags |= PF_SUPERPRIV; } return ret; } int cap_mmap_file(struct file *file, unsigned long reqprot, unsigned long prot, unsigned long flags) { return 0; } #ifdef CONFIG_SECURITY static struct security_hook_list capability_hooks[] __lsm_ro_after_init = { LSM_HOOK_INIT(capable, cap_capable), LSM_HOOK_INIT(settime, cap_settime), LSM_HOOK_INIT(ptrace_access_check, cap_ptrace_access_check), LSM_HOOK_INIT(ptrace_traceme, cap_ptrace_traceme), LSM_HOOK_INIT(capget, cap_capget), LSM_HOOK_INIT(capset, cap_capset), LSM_HOOK_INIT(bprm_creds_from_file, cap_bprm_creds_from_file), LSM_HOOK_INIT(inode_need_killpriv, cap_inode_need_killpriv), LSM_HOOK_INIT(inode_killpriv, cap_inode_killpriv), LSM_HOOK_INIT(inode_getsecurity, cap_inode_getsecurity), LSM_HOOK_INIT(mmap_addr, cap_mmap_addr), LSM_HOOK_INIT(mmap_file, cap_mmap_file), LSM_HOOK_INIT(task_fix_setuid, cap_task_fix_setuid), LSM_HOOK_INIT(task_prctl, cap_task_prctl), LSM_HOOK_INIT(task_setscheduler, cap_task_setscheduler), LSM_HOOK_INIT(task_setioprio, cap_task_setioprio), LSM_HOOK_INIT(task_setnice, cap_task_setnice), LSM_HOOK_INIT(vm_enough_memory, cap_vm_enough_memory), }; static int __init capability_init(void) { security_add_hooks(capability_hooks, ARRAY_SIZE(capability_hooks), "capability"); return 0; } DEFINE_LSM(capability) = { .name = "capability", .order = LSM_ORDER_FIRST, .init = capability_init, }; #endif /* CONFIG_SECURITY */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 /* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __NET_CFG80211_H #define __NET_CFG80211_H /* * 802.11 device and configuration interface * * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH * Copyright (C) 2018-2020 Intel Corporation */ #include <linux/netdevice.h> #include <linux/debugfs.h> #include <linux/list.h> #include <linux/bug.h> #include <linux/netlink.h> #include <linux/skbuff.h> #include <linux/nl80211.h> #include <linux/if_ether.h> #include <linux/ieee80211.h> #include <linux/net.h> #include <net/regulatory.h> /** * DOC: Introduction * * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges * userspace and drivers, and offers some utility functionality associated * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used * by all modern wireless drivers in Linux, so that they offer a consistent * API through nl80211. For backward compatibility, cfg80211 also offers * wireless extensions to userspace, but hides them from drivers completely. * * Additionally, cfg80211 contains code to help enforce regulatory spectrum * use restrictions. */ /** * DOC: Device registration * * In order for a driver to use cfg80211, it must register the hardware device * with cfg80211. This happens through a number of hardware capability structs * described below. * * The fundamental structure for each device is the 'wiphy', of which each * instance describes a physical wireless device connected to the system. Each * such wiphy can have zero, one, or many virtual interfaces associated with * it, which need to be identified as such by pointing the network interface's * @ieee80211_ptr pointer to a &struct wireless_dev which further describes * the wireless part of the interface, normally this struct is embedded in the * network interface's private data area. Drivers can optionally allow creating * or destroying virtual interfaces on the fly, but without at least one or the * ability to create some the wireless device isn't useful. * * Each wiphy structure contains device capability information, and also has * a pointer to the various operations the driver offers. The definitions and * structures here describe these capabilities in detail. */ struct wiphy; /* * wireless hardware capability structures */ /** * enum ieee80211_channel_flags - channel flags * * Channel flags set by the regulatory control code. * * @IEEE80211_CHAN_DISABLED: This channel is disabled. * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes * sending probe requests or beaconing. * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel * is not permitted. * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, * this flag indicates that an 80 MHz channel cannot use this * channel as the control or any of the secondary channels. * This may be due to the driver or due to regulatory bandwidth * restrictions. * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, * this flag indicates that an 160 MHz channel cannot use this * channel as the control or any of the secondary channels. * This may be due to the driver or due to regulatory bandwidth * restrictions. * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY * @IEEE80211_CHAN_IR_CONCURRENT: see %NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted * on this channel. * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted * on this channel. * @IEEE80211_CHAN_NO_HE: HE operation is not permitted on this channel. * @IEEE80211_CHAN_1MHZ: 1 MHz bandwidth is permitted * on this channel. * @IEEE80211_CHAN_2MHZ: 2 MHz bandwidth is permitted * on this channel. * @IEEE80211_CHAN_4MHZ: 4 MHz bandwidth is permitted * on this channel. * @IEEE80211_CHAN_8MHZ: 8 MHz bandwidth is permitted * on this channel. * @IEEE80211_CHAN_16MHZ: 16 MHz bandwidth is permitted * on this channel. * */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, IEEE80211_CHAN_NO_IR = 1<<1, /* hole at 1<<2 */ IEEE80211_CHAN_RADAR = 1<<3, IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, IEEE80211_CHAN_NO_OFDM = 1<<6, IEEE80211_CHAN_NO_80MHZ = 1<<7, IEEE80211_CHAN_NO_160MHZ = 1<<8, IEEE80211_CHAN_INDOOR_ONLY = 1<<9, IEEE80211_CHAN_IR_CONCURRENT = 1<<10, IEEE80211_CHAN_NO_20MHZ = 1<<11, IEEE80211_CHAN_NO_10MHZ = 1<<12, IEEE80211_CHAN_NO_HE = 1<<13, IEEE80211_CHAN_1MHZ = 1<<14, IEEE80211_CHAN_2MHZ = 1<<15, IEEE80211_CHAN_4MHZ = 1<<16, IEEE80211_CHAN_8MHZ = 1<<17, IEEE80211_CHAN_16MHZ = 1<<18, }; #define IEEE80211_CHAN_NO_HT40 \ (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) #define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 #define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) /** * struct ieee80211_channel - channel definition * * This structure describes a single channel for use * with cfg80211. * * @center_freq: center frequency in MHz * @freq_offset: offset from @center_freq, in KHz * @hw_value: hardware-specific value for the channel * @flags: channel flags from &enum ieee80211_channel_flags. * @orig_flags: channel flags at registration time, used by regulatory * code to support devices with additional restrictions * @band: band this channel belongs to. * @max_antenna_gain: maximum antenna gain in dBi * @max_power: maximum transmission power (in dBm) * @max_reg_power: maximum regulatory transmission power (in dBm) * @beacon_found: helper to regulatory code to indicate when a beacon * has been found on this channel. Use regulatory_hint_found_beacon() * to enable this, this is useful only on 5 GHz band. * @orig_mag: internal use * @orig_mpwr: internal use * @dfs_state: current state of this channel. Only relevant if radar is required * on this channel. * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels. */ struct ieee80211_channel { enum nl80211_band band; u32 center_freq; u16 freq_offset; u16 hw_value; u32 flags; int max_antenna_gain; int max_power; int max_reg_power; bool beacon_found; u32 orig_flags; int orig_mag, orig_mpwr; enum nl80211_dfs_state dfs_state; unsigned long dfs_state_entered; unsigned int dfs_cac_ms; }; /** * enum ieee80211_rate_flags - rate flags * * Hardware/specification flags for rates. These are structured * in a way that allows using the same bitrate structure for * different bands/PHY modes. * * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short * preamble on this bitrate; only relevant in 2.4GHz band and * with CCK rates. * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate * when used with 802.11a (on the 5 GHz band); filled by the * core code when registering the wiphy. * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate * when used with 802.11b (on the 2.4 GHz band); filled by the * core code when registering the wiphy. * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate * when used with 802.11g (on the 2.4 GHz band); filled by the * core code when registering the wiphy. * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode */ enum ieee80211_rate_flags { IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, IEEE80211_RATE_MANDATORY_A = 1<<1, IEEE80211_RATE_MANDATORY_B = 1<<2, IEEE80211_RATE_MANDATORY_G = 1<<3, IEEE80211_RATE_ERP_G = 1<<4, IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5, IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6, }; /** * enum ieee80211_bss_type - BSS type filter * * @IEEE80211_BSS_TYPE_ESS: Infrastructure BSS * @IEEE80211_BSS_TYPE_PBSS: Personal BSS * @IEEE80211_BSS_TYPE_IBSS: Independent BSS * @IEEE80211_BSS_TYPE_MBSS: Mesh BSS * @IEEE80211_BSS_TYPE_ANY: Wildcard value for matching any BSS type */ enum ieee80211_bss_type { IEEE80211_BSS_TYPE_ESS, IEEE80211_BSS_TYPE_PBSS, IEEE80211_BSS_TYPE_IBSS, IEEE80211_BSS_TYPE_MBSS, IEEE80211_BSS_TYPE_ANY }; /** * enum ieee80211_privacy - BSS privacy filter * * @IEEE80211_PRIVACY_ON: privacy bit set * @IEEE80211_PRIVACY_OFF: privacy bit clear * @IEEE80211_PRIVACY_ANY: Wildcard value for matching any privacy setting */ enum ieee80211_privacy { IEEE80211_PRIVACY_ON, IEEE80211_PRIVACY_OFF, IEEE80211_PRIVACY_ANY }; #define IEEE80211_PRIVACY(x) \ ((x) ? IEEE80211_PRIVACY_ON : IEEE80211_PRIVACY_OFF) /** * struct ieee80211_rate - bitrate definition * * This structure describes a bitrate that an 802.11 PHY can * operate with. The two values @hw_value and @hw_value_short * are only for driver use when pointers to this structure are * passed around. * * @flags: rate-specific flags * @bitrate: bitrate in units of 100 Kbps * @hw_value: driver/hardware value for this rate * @hw_value_short: driver/hardware value for this rate when * short preamble is used */ struct ieee80211_rate { u32 flags; u16 bitrate; u16 hw_value, hw_value_short; }; /** * struct ieee80211_he_obss_pd - AP settings for spatial reuse * * @enable: is the feature enabled. * @sr_ctrl: The SR Control field of SRP element. * @non_srg_max_offset: non-SRG maximum tx power offset * @min_offset: minimal tx power offset an associated station shall use * @max_offset: maximum tx power offset an associated station shall use * @bss_color_bitmap: bitmap that indicates the BSS color values used by * members of the SRG * @partial_bssid_bitmap: bitmap that indicates the partial BSSID values * used by members of the SRG */ struct ieee80211_he_obss_pd { bool enable; u8 sr_ctrl; u8 non_srg_max_offset; u8 min_offset; u8 max_offset; u8 bss_color_bitmap[8]; u8 partial_bssid_bitmap[8]; }; /** * struct cfg80211_he_bss_color - AP settings for BSS coloring * * @color: the current color. * @enabled: HE BSS color is used * @partial: define the AID equation. */ struct cfg80211_he_bss_color { u8 color; bool enabled; bool partial; }; /** * struct ieee80211_he_bss_color - AP settings for BSS coloring * * @color: the current color. * @disabled: is the feature disabled. * @partial: define the AID equation. */ struct ieee80211_he_bss_color { u8 color; bool disabled; bool partial; }; /** * struct ieee80211_sta_ht_cap - STA's HT capabilities * * This structure describes most essential parameters needed * to describe 802.11n HT capabilities for an STA. * * @ht_supported: is HT supported by the STA * @cap: HT capabilities map as described in 802.11n spec * @ampdu_factor: Maximum A-MPDU length factor * @ampdu_density: Minimum A-MPDU spacing * @mcs: Supported MCS rates */ struct ieee80211_sta_ht_cap { u16 cap; /* use IEEE80211_HT_CAP_ */ bool ht_supported; u8 ampdu_factor; u8 ampdu_density; struct ieee80211_mcs_info mcs; }; /** * struct ieee80211_sta_vht_cap - STA's VHT capabilities * * This structure describes most essential parameters needed * to describe 802.11ac VHT capabilities for an STA. * * @vht_supported: is VHT supported by the STA * @cap: VHT capabilities map as described in 802.11ac spec * @vht_mcs: Supported VHT MCS rates */ struct ieee80211_sta_vht_cap { bool vht_supported; u32 cap; /* use IEEE80211_VHT_CAP_ */ struct ieee80211_vht_mcs_info vht_mcs; }; #define IEEE80211_HE_PPE_THRES_MAX_LEN 25 /** * struct ieee80211_sta_he_cap - STA's HE capabilities * * This structure describes most essential parameters needed * to describe 802.11ax HE capabilities for a STA. * * @has_he: true iff HE data is valid. * @he_cap_elem: Fixed portion of the HE capabilities element. * @he_mcs_nss_supp: The supported NSS/MCS combinations. * @ppe_thres: Holds the PPE Thresholds data. */ struct ieee80211_sta_he_cap { bool has_he; struct ieee80211_he_cap_elem he_cap_elem; struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp; u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN]; }; /** * struct ieee80211_sband_iftype_data * * This structure encapsulates sband data that is relevant for the * interface types defined in @types_mask. Each type in the * @types_mask must be unique across all instances of iftype_data. * * @types_mask: interface types mask * @he_cap: holds the HE capabilities * @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a * 6 GHz band channel (and 0 may be valid value). */ struct ieee80211_sband_iftype_data { u16 types_mask; struct ieee80211_sta_he_cap he_cap; struct ieee80211_he_6ghz_capa he_6ghz_capa; }; /** * enum ieee80211_edmg_bw_config - allowed channel bandwidth configurations * * @IEEE80211_EDMG_BW_CONFIG_4: 2.16GHz * @IEEE80211_EDMG_BW_CONFIG_5: 2.16GHz and 4.32GHz * @IEEE80211_EDMG_BW_CONFIG_6: 2.16GHz, 4.32GHz and 6.48GHz * @IEEE80211_EDMG_BW_CONFIG_7: 2.16GHz, 4.32GHz, 6.48GHz and 8.64GHz * @IEEE80211_EDMG_BW_CONFIG_8: 2.16GHz and 2.16GHz + 2.16GHz * @IEEE80211_EDMG_BW_CONFIG_9: 2.16GHz, 4.32GHz and 2.16GHz + 2.16GHz * @IEEE80211_EDMG_BW_CONFIG_10: 2.16GHz, 4.32GHz, 6.48GHz and 2.16GHz+2.16GHz * @IEEE80211_EDMG_BW_CONFIG_11: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz and * 2.16GHz+2.16GHz * @IEEE80211_EDMG_BW_CONFIG_12: 2.16GHz, 2.16GHz + 2.16GHz and * 4.32GHz + 4.32GHz * @IEEE80211_EDMG_BW_CONFIG_13: 2.16GHz, 4.32GHz, 2.16GHz + 2.16GHz and * 4.32GHz + 4.32GHz * @IEEE80211_EDMG_BW_CONFIG_14: 2.16GHz, 4.32GHz, 6.48GHz, 2.16GHz + 2.16GHz * and 4.32GHz + 4.32GHz * @IEEE80211_EDMG_BW_CONFIG_15: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz, * 2.16GHz + 2.16GHz and 4.32GHz + 4.32GHz */ enum ieee80211_edmg_bw_config { IEEE80211_EDMG_BW_CONFIG_4 = 4, IEEE80211_EDMG_BW_CONFIG_5 = 5, IEEE80211_EDMG_BW_CONFIG_6 = 6, IEEE80211_EDMG_BW_CONFIG_7 = 7, IEEE80211_EDMG_BW_CONFIG_8 = 8, IEEE80211_EDMG_BW_CONFIG_9 = 9, IEEE80211_EDMG_BW_CONFIG_10 = 10, IEEE80211_EDMG_BW_CONFIG_11 = 11, IEEE80211_EDMG_BW_CONFIG_12 = 12, IEEE80211_EDMG_BW_CONFIG_13 = 13, IEEE80211_EDMG_BW_CONFIG_14 = 14, IEEE80211_EDMG_BW_CONFIG_15 = 15, }; /** * struct ieee80211_edmg - EDMG configuration * * This structure describes most essential parameters needed * to describe 802.11ay EDMG configuration * * @channels: bitmap that indicates the 2.16 GHz channel(s) * that are allowed to be used for transmissions. * Bit 0 indicates channel 1, bit 1 indicates channel 2, etc. * Set to 0 indicate EDMG not supported. * @bw_config: Channel BW Configuration subfield encodes * the allowed channel bandwidth configurations */ struct ieee80211_edmg { u8 channels; enum ieee80211_edmg_bw_config bw_config; }; /** * struct ieee80211_sta_s1g_cap - STA's S1G capabilities * * This structure describes most essential parameters needed * to describe 802.11ah S1G capabilities for a STA. * * @s1g_supported: is STA an S1G STA * @cap: S1G capabilities information * @nss_mcs: Supported NSS MCS set */ struct ieee80211_sta_s1g_cap { bool s1g; u8 cap[10]; /* use S1G_CAPAB_ */ u8 nss_mcs[5]; }; /** * struct ieee80211_supported_band - frequency band definition * * This structure describes a frequency band a wiphy * is able to operate in. * * @channels: Array of channels the hardware can operate with * in this band. * @band: the band this structure represents * @n_channels: Number of channels in @channels * @bitrates: Array of bitrates the hardware can operate with * in this band. Must be sorted to give a valid "supported * rates" IE, i.e. CCK rates first, then OFDM. * @n_bitrates: Number of bitrates in @bitrates * @ht_cap: HT capabilities in this band * @vht_cap: VHT capabilities in this band * @s1g_cap: S1G capabilities in this band * @edmg_cap: EDMG capabilities in this band * @s1g_cap: S1G capabilities in this band (S1B band only, of course) * @n_iftype_data: number of iftype data entries * @iftype_data: interface type data entries. Note that the bits in * @types_mask inside this structure cannot overlap (i.e. only * one occurrence of each type is allowed across all instances of * iftype_data). */ struct ieee80211_supported_band { struct ieee80211_channel *channels; struct ieee80211_rate *bitrates; enum nl80211_band band; int n_channels; int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; struct ieee80211_sta_s1g_cap s1g_cap; struct ieee80211_edmg edmg_cap; u16 n_iftype_data; const struct ieee80211_sband_iftype_data *iftype_data; }; /** * ieee80211_get_sband_iftype_data - return sband data for a given iftype * @sband: the sband to search for the STA on * @iftype: enum nl80211_iftype * * Return: pointer to struct ieee80211_sband_iftype_data, or NULL is none found */ static inline const struct ieee80211_sband_iftype_data * ieee80211_get_sband_iftype_data(const struct ieee80211_supported_band *sband, u8 iftype) { int i; if (WARN_ON(iftype >= NL80211_IFTYPE_MAX)) return NULL; for (i = 0; i < sband->n_iftype_data; i++) { const struct ieee80211_sband_iftype_data *data = &sband->iftype_data[i]; if (data->types_mask & BIT(iftype)) return data; } return NULL; } /** * ieee80211_get_he_iftype_cap - return HE capabilities for an sband's iftype * @sband: the sband to search for the iftype on * @iftype: enum nl80211_iftype * * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found */ static inline const struct ieee80211_sta_he_cap * ieee80211_get_he_iftype_cap(const struct ieee80211_supported_band *sband, u8 iftype) { const struct ieee80211_sband_iftype_data *data = ieee80211_get_sband_iftype_data(sband, iftype); if (data && data->he_cap.has_he) return &data->he_cap; return NULL; } /** * ieee80211_get_he_sta_cap - return HE capabilities for an sband's STA * @sband: the sband to search for the STA on * * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found */ static inline const struct ieee80211_sta_he_cap * ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband) { return ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_STATION); } /** * ieee80211_get_he_6ghz_capa - return HE 6 GHz capabilities * @sband: the sband to search for the STA on * @iftype: the iftype to search for * * Return: the 6GHz capabilities */ static inline __le16 ieee80211_get_he_6ghz_capa(const struct ieee80211_supported_band *sband, enum nl80211_iftype iftype) { const struct ieee80211_sband_iftype_data *data = ieee80211_get_sband_iftype_data(sband, iftype); if (WARN_ON(!data || !data->he_cap.has_he)) return 0; return data->he_6ghz_capa.capa; } /** * wiphy_read_of_freq_limits - read frequency limits from device tree * * @wiphy: the wireless device to get extra limits for * * Some devices may have extra limitations specified in DT. This may be useful * for chipsets that normally support more bands but are limited due to board * design (e.g. by antennas or external power amplifier). * * This function reads info from DT and uses it to *modify* channels (disable * unavailable ones). It's usually a *bad* idea to use it in drivers with * shared channel data as DT limitations are device specific. You should make * sure to call it only if channels in wiphy are copied and can be modified * without affecting other devices. * * As this function access device node it has to be called after set_wiphy_dev. * It also modifies channels so they have to be set first. * If using this helper, call it before wiphy_register(). */ #ifdef CONFIG_OF void wiphy_read_of_freq_limits(struct wiphy *wiphy); #else /* CONFIG_OF */ static inline void wiphy_read_of_freq_limits(struct wiphy *wiphy) { } #endif /* !CONFIG_OF */ /* * Wireless hardware/device configuration structures and methods */ /** * DOC: Actions and configuration * * Each wireless device and each virtual interface offer a set of configuration * operations and other actions that are invoked by userspace. Each of these * actions is described in the operations structure, and the parameters these * operations use are described separately. * * Additionally, some operations are asynchronous and expect to get status * information via some functions that drivers need to call. * * Scanning and BSS list handling with its associated functionality is described * in a separate chapter. */ #define VHT_MUMIMO_GROUPS_DATA_LEN (WLAN_MEMBERSHIP_LEN +\ WLAN_USER_POSITION_LEN) /** * struct vif_params - describes virtual interface parameters * @flags: monitor interface flags, unchanged if 0, otherwise * %MONITOR_FLAG_CHANGED will be set * @use_4addr: use 4-address frames * @macaddr: address to use for this virtual interface. * If this parameter is set to zero address the driver may * determine the address as needed. * This feature is only fully supported by drivers that enable the * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating ** only p2p devices with specified MAC. * @vht_mumimo_groups: MU-MIMO groupID, used for monitoring MU-MIMO packets * belonging to that MU-MIMO groupID; %NULL if not changed * @vht_mumimo_follow_addr: MU-MIMO follow address, used for monitoring * MU-MIMO packets going to the specified station; %NULL if not changed */ struct vif_params { u32 flags; int use_4addr; u8 macaddr[ETH_ALEN]; const u8 *vht_mumimo_groups; const u8 *vht_mumimo_follow_addr; }; /** * struct key_params - key information * * Information about a key * * @key: key material * @key_len: length of key material * @cipher: cipher suite selector * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used * with the get_key() callback, must be in little endian, * length given by @seq_len. * @seq_len: length of @seq. * @vlan_id: vlan_id for VLAN group key (if nonzero) * @mode: key install mode (RX_TX, NO_TX or SET_TX) */ struct key_params { const u8 *key; const u8 *seq; int key_len; int seq_len; u16 vlan_id; u32 cipher; enum nl80211_key_mode mode; }; /** * struct cfg80211_chan_def - channel definition * @chan: the (control) channel * @width: channel width * @center_freq1: center frequency of first segment * @center_freq2: center frequency of second segment * (only with 80+80 MHz) * @edmg: define the EDMG channels configuration. * If edmg is requested (i.e. the .channels member is non-zero), * chan will define the primary channel and all other * parameters are ignored. * @freq1_offset: offset from @center_freq1, in KHz */ struct cfg80211_chan_def { struct ieee80211_channel *chan; enum nl80211_chan_width width; u32 center_freq1; u32 center_freq2; struct ieee80211_edmg edmg; u16 freq1_offset; }; /* * cfg80211_bitrate_mask - masks for bitrate control */ struct cfg80211_bitrate_mask { struct { u32 legacy; u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; u16 vht_mcs[NL80211_VHT_NSS_MAX]; u16 he_mcs[NL80211_HE_NSS_MAX]; enum nl80211_txrate_gi gi; enum nl80211_he_gi he_gi; enum nl80211_he_ltf he_ltf; } control[NUM_NL80211_BANDS]; }; /** * struct cfg80211_tid_cfg - TID specific configuration * @config_override: Flag to notify driver to reset TID configuration * of the peer. * @tids: bitmap of TIDs to modify * @mask: bitmap of attributes indicating which parameter changed, * similar to &nl80211_tid_config_supp. * @noack: noack configuration value for the TID * @retry_long: retry count value * @retry_short: retry count value * @ampdu: Enable/Disable MPDU aggregation * @rtscts: Enable/Disable RTS/CTS * @amsdu: Enable/Disable MSDU aggregation * @txrate_type: Tx bitrate mask type * @txrate_mask: Tx bitrate to be applied for the TID */ struct cfg80211_tid_cfg { bool config_override; u8 tids; u64 mask; enum nl80211_tid_config noack; u8 retry_long, retry_short; enum nl80211_tid_config ampdu; enum nl80211_tid_config rtscts; enum nl80211_tid_config amsdu; enum nl80211_tx_rate_setting txrate_type; struct cfg80211_bitrate_mask txrate_mask; }; /** * struct cfg80211_tid_config - TID configuration * @peer: Station's MAC address * @n_tid_conf: Number of TID specific configurations to be applied * @tid_conf: Configuration change info */ struct cfg80211_tid_config { const u8 *peer; u32 n_tid_conf; struct cfg80211_tid_cfg tid_conf[]; }; /** * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * * Return: The old channel type (NOHT, HT20, HT40+/-) from a given * chandef, which must have a bandwidth allowing this conversion. */ static inline enum nl80211_channel_type cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef) { switch (chandef->width) { case NL80211_CHAN_WIDTH_20_NOHT: return NL80211_CHAN_NO_HT; case NL80211_CHAN_WIDTH_20: return NL80211_CHAN_HT20; case NL80211_CHAN_WIDTH_40: if (chandef->center_freq1 > chandef->chan->center_freq) return NL80211_CHAN_HT40PLUS; return NL80211_CHAN_HT40MINUS; default: WARN_ON(1); return NL80211_CHAN_NO_HT; } } /** * cfg80211_chandef_create - create channel definition using channel type * @chandef: the channel definition struct to fill * @channel: the control channel * @chantype: the channel type * * Given a channel type, create a channel definition. */ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, struct ieee80211_channel *channel, enum nl80211_channel_type chantype); /** * cfg80211_chandef_identical - check if two channel definitions are identical * @chandef1: first channel definition * @chandef2: second channel definition * * Return: %true if the channels defined by the channel definitions are * identical, %false otherwise. */ static inline bool cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, const struct cfg80211_chan_def *chandef2) { return (chandef1->chan == chandef2->chan && chandef1->width == chandef2->width && chandef1->center_freq1 == chandef2->center_freq1 && chandef1->freq1_offset == chandef2->freq1_offset && chandef1->center_freq2 == chandef2->center_freq2); } /** * cfg80211_chandef_is_edmg - check if chandef represents an EDMG channel * * @chandef: the channel definition * * Return: %true if EDMG defined, %false otherwise. */ static inline bool cfg80211_chandef_is_edmg(const struct cfg80211_chan_def *chandef) { return chandef->edmg.channels || chandef->edmg.bw_config; } /** * cfg80211_chandef_compatible - check if two channel definitions are compatible * @chandef1: first channel definition * @chandef2: second channel definition * * Return: %NULL if the given channel definitions are incompatible, * chandef1 or chandef2 otherwise. */ const struct cfg80211_chan_def * cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, const struct cfg80211_chan_def *chandef2); /** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check * Return: %true if the channel definition is valid. %false otherwise. */ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); /** * cfg80211_chandef_usable - check if secondary channels can be used * @wiphy: the wiphy to validate against * @chandef: the channel definition to check * @prohibited_flags: the regulatory channel flags that must not be set * Return: %true if secondary channels are usable. %false otherwise. */ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, u32 prohibited_flags); /** * cfg80211_chandef_dfs_required - checks if radar detection is required * @wiphy: the wiphy to validate against * @chandef: the channel definition to check * @iftype: the interface type as specified in &enum nl80211_iftype * Returns: * 1 if radar detection is required, 0 if it is not, < 0 on error */ int cfg80211_chandef_dfs_required(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, enum nl80211_iftype iftype); /** * ieee80211_chandef_rate_flags - returns rate flags for a channel * * In some channel types, not all rates may be used - for example CCK * rates may not be used in 5/10 MHz channels. * * @chandef: channel definition for the channel * * Returns: rate flags which apply for this channel */ static inline enum ieee80211_rate_flags ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) { switch (chandef->width) { case NL80211_CHAN_WIDTH_5: return IEEE80211_RATE_SUPPORTS_5MHZ; case NL80211_CHAN_WIDTH_10: return IEEE80211_RATE_SUPPORTS_10MHZ; default: break; } return 0; } /** * ieee80211_chandef_max_power - maximum transmission power for the chandef * * In some regulations, the transmit power may depend on the configured channel * bandwidth which may be defined as dBm/MHz. This function returns the actual * max_power for non-standard (20 MHz) channels. * * @chandef: channel definition for the channel * * Returns: maximum allowed transmission power in dBm for the chandef */ static inline int ieee80211_chandef_max_power(struct cfg80211_chan_def *chandef) { switch (chandef->width) { case NL80211_CHAN_WIDTH_5: return min(chandef->chan->max_reg_power - 6, chandef->chan->max_power); case NL80211_CHAN_WIDTH_10: return min(chandef->chan->max_reg_power - 3, chandef->chan->max_power); default: break; } return chandef->chan->max_power; } /** * enum survey_info_flags - survey information flags * * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in * @SURVEY_INFO_IN_USE: channel is currently being used * @SURVEY_INFO_TIME: active time (in ms) was filled in * @SURVEY_INFO_TIME_BUSY: busy time was filled in * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in * @SURVEY_INFO_TIME_RX: receive time was filled in * @SURVEY_INFO_TIME_TX: transmit time was filled in * @SURVEY_INFO_TIME_SCAN: scan time was filled in * @SURVEY_INFO_TIME_BSS_RX: local BSS receive time was filled in * * Used by the driver to indicate which info in &struct survey_info * it has filled in during the get_survey(). */ enum survey_info_flags { SURVEY_INFO_NOISE_DBM = BIT(0), SURVEY_INFO_IN_USE = BIT(1), SURVEY_INFO_TIME = BIT(2), SURVEY_INFO_TIME_BUSY = BIT(3), SURVEY_INFO_TIME_EXT_BUSY = BIT(4), SURVEY_INFO_TIME_RX = BIT(5), SURVEY_INFO_TIME_TX = BIT(6), SURVEY_INFO_TIME_SCAN = BIT(7), SURVEY_INFO_TIME_BSS_RX = BIT(8), }; /** * struct survey_info - channel survey response * * @channel: the channel this survey record reports, may be %NULL for a single * record to report global statistics * @filled: bitflag of flags from &enum survey_info_flags * @noise: channel noise in dBm. This and all following fields are * optional * @time: amount of time in ms the radio was turn on (on the channel) * @time_busy: amount of time the primary channel was sensed busy * @time_ext_busy: amount of time the extension channel was sensed busy * @time_rx: amount of time the radio spent receiving data * @time_tx: amount of time the radio spent transmitting data * @time_scan: amount of time the radio spent for scanning * @time_bss_rx: amount of time the radio spent receiving data on a local BSS * * Used by dump_survey() to report back per-channel survey information. * * This structure can later be expanded with things like * channel duty cycle etc. */ struct survey_info { struct ieee80211_channel *channel; u64 time; u64 time_busy; u64 time_ext_busy; u64 time_rx; u64 time_tx; u64 time_scan; u64 time_bss_rx; u32 filled; s8 noise; }; #define CFG80211_MAX_WEP_KEYS 4 /** * struct cfg80211_crypto_settings - Crypto settings * @wpa_versions: indicates which, if any, WPA versions are enabled * (from enum nl80211_wpa_versions) * @cipher_group: group key cipher suite (or 0 if unset) * @n_ciphers_pairwise: number of AP supported unicast ciphers * @ciphers_pairwise: unicast key cipher suites * @n_akm_suites: number of AKM suites * @akm_suites: AKM suites * @control_port: Whether user space controls IEEE 802.1X port, i.e., * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is * required to assume that the port is unauthorized until authorized by * user space. Otherwise, port is marked authorized by default. * @control_port_ethertype: the control port protocol that should be * allowed through even on unauthorized ports * @control_port_no_encrypt: TRUE to prevent encryption of control port * protocol frames. * @control_port_over_nl80211: TRUE if userspace expects to exchange control * port frames over NL80211 instead of the network interface. * @control_port_no_preauth: disables pre-auth rx over the nl80211 control * port for mac80211 * @wep_keys: static WEP keys, if not NULL points to an array of * CFG80211_MAX_WEP_KEYS WEP keys * @wep_tx_key: key index (0..3) of the default TX static WEP key * @psk: PSK (for devices supporting 4-way-handshake offload) * @sae_pwd: password for SAE authentication (for devices supporting SAE * offload) * @sae_pwd_len: length of SAE password (for devices supporting SAE offload) */ struct cfg80211_crypto_settings { u32 wpa_versions; u32 cipher_group; int n_ciphers_pairwise; u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; int n_akm_suites; u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; bool control_port; __be16 control_port_ethertype; bool control_port_no_encrypt; bool control_port_over_nl80211; bool control_port_no_preauth; struct key_params *wep_keys; int wep_tx_key; const u8 *psk; const u8 *sae_pwd; u8 sae_pwd_len; }; /** * struct cfg80211_beacon_data - beacon data * @head: head portion of beacon (before TIM IE) * or %NULL if not changed * @tail: tail portion of beacon (after TIM IE) * or %NULL if not changed * @head_len: length of @head * @tail_len: length of @tail * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL * @beacon_ies_len: length of beacon_ies in octets * @proberesp_ies: extra information element(s) to add into Probe Response * frames or %NULL * @proberesp_ies_len: length of proberesp_ies in octets * @assocresp_ies: extra information element(s) to add into (Re)Association * Response frames or %NULL * @assocresp_ies_len: length of assocresp_ies in octets * @probe_resp_len: length of probe response template (@probe_resp) * @probe_resp: probe response template (AP mode only) * @ftm_responder: enable FTM responder functionality; -1 for no change * (which also implies no change in LCI/civic location data) * @lci: Measurement Report element content, starting with Measurement Token * (measurement type 8) * @civicloc: Measurement Report element content, starting with Measurement * Token (measurement type 11) * @lci_len: LCI data length * @civicloc_len: Civic location data length */ struct cfg80211_beacon_data { const u8 *head, *tail; const u8 *beacon_ies; const u8 *proberesp_ies; const u8 *assocresp_ies; const u8 *probe_resp; const u8 *lci; const u8 *civicloc; s8 ftm_responder; size_t head_len, tail_len; size_t beacon_ies_len; size_t proberesp_ies_len; size_t assocresp_ies_len; size_t probe_resp_len; size_t lci_len; size_t civicloc_len; }; struct mac_address { u8 addr[ETH_ALEN]; }; /** * struct cfg80211_acl_data - Access control list data * * @acl_policy: ACL policy to be applied on the station's * entry specified by mac_addr * @n_acl_entries: Number of MAC address entries passed * @mac_addrs: List of MAC addresses of stations to be used for ACL */ struct cfg80211_acl_data { enum nl80211_acl_policy acl_policy; int n_acl_entries; /* Keep it last */ struct mac_address mac_addrs[]; }; /** * struct cfg80211_fils_discovery - FILS discovery parameters from * IEEE Std 802.11ai-2016, Annex C.3 MIB detail. * * @min_interval: Minimum packet interval in TUs (0 - 10000) * @max_interval: Maximum packet interval in TUs (0 - 10000) * @tmpl_len: Template length * @tmpl: Template data for FILS discovery frame including the action * frame headers. */ struct cfg80211_fils_discovery { u32 min_interval; u32 max_interval; size_t tmpl_len; const u8 *tmpl; }; /** * struct cfg80211_unsol_bcast_probe_resp - Unsolicited broadcast probe * response parameters in 6GHz. * * @interval: Packet interval in TUs. Maximum allowed is 20 TU, as mentioned * in IEEE P802.11ax/D6.0 26.17.2.3.2 - AP behavior for fast passive * scanning * @tmpl_len: Template length * @tmpl: Template data for probe response */ struct cfg80211_unsol_bcast_probe_resp { u32 interval; size_t tmpl_len; const u8 *tmpl; }; /** * enum cfg80211_ap_settings_flags - AP settings flags * * Used by cfg80211_ap_settings * * @AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external authentication */ enum cfg80211_ap_settings_flags { AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = BIT(0), }; /** * struct cfg80211_ap_settings - AP configuration * * Used to configure an AP interface. * * @chandef: defines the channel to use * @beacon: beacon data * @beacon_interval: beacon interval * @dtim_period: DTIM period * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from * user space) * @ssid_len: length of @ssid * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames * @crypto: crypto settings * @privacy: the BSS uses privacy * @auth_type: Authentication type (algorithm) * @smps_mode: SMPS mode * @inactivity_timeout: time in seconds to determine station's inactivity. * @p2p_ctwindow: P2P CT Window * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control * @pbss: If set, start as a PCP instead of AP. Relevant for DMG * networks. * @beacon_rate: bitrate to be used for beacons * @ht_cap: HT capabilities (or %NULL if HT isn't enabled) * @vht_cap: VHT capabilities (or %NULL if VHT isn't enabled) * @he_cap: HE capabilities (or %NULL if HE isn't enabled) * @ht_required: stations must support HT * @vht_required: stations must support VHT * @twt_responder: Enable Target Wait Time * @he_required: stations must support HE * @flags: flags, as defined in enum cfg80211_ap_settings_flags * @he_obss_pd: OBSS Packet Detection settings * @he_bss_color: BSS Color settings * @he_oper: HE operation IE (or %NULL if HE isn't enabled) * @fils_discovery: FILS discovery transmission parameters * @unsol_bcast_probe_resp: Unsolicited broadcast probe response parameters */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; struct cfg80211_beacon_data beacon; int beacon_interval, dtim_period; const u8 *ssid; size_t ssid_len; enum nl80211_hidden_ssid hidden_ssid; struct cfg80211_crypto_settings crypto; bool privacy; enum nl80211_auth_type auth_type; enum nl80211_smps_mode smps_mode; int inactivity_timeout; u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; bool pbss; struct cfg80211_bitrate_mask beacon_rate; const struct ieee80211_ht_cap *ht_cap; const struct ieee80211_vht_cap *vht_cap; const struct ieee80211_he_cap_elem *he_cap; const struct ieee80211_he_operation *he_oper; bool ht_required, vht_required, he_required; bool twt_responder; u32 flags; struct ieee80211_he_obss_pd he_obss_pd; struct cfg80211_he_bss_color he_bss_color; struct cfg80211_fils_discovery fils_discovery; struct cfg80211_unsol_bcast_probe_resp unsol_bcast_probe_resp; }; /** * struct cfg80211_csa_settings - channel switch settings * * Used for channel switch * * @chandef: defines the channel to use after the switch * @beacon_csa: beacon data while performing the switch * @counter_offsets_beacon: offsets of the counters within the beacon (tail) * @counter_offsets_presp: offsets of the counters within the probe response * @n_counter_offsets_beacon: number of csa counters the beacon (tail) * @n_counter_offsets_presp: number of csa counters in the probe response * @beacon_after: beacon data to be used on the new channel * @radar_required: whether radar detection is required on the new channel * @block_tx: whether transmissions should be blocked while changing * @count: number of beacons until switch */ struct cfg80211_csa_settings { struct cfg80211_chan_def chandef; struct cfg80211_beacon_data beacon_csa; const u16 *counter_offsets_beacon; const u16 *counter_offsets_presp; unsigned int n_counter_offsets_beacon; unsigned int n_counter_offsets_presp; struct cfg80211_beacon_data beacon_after; bool radar_required; bool block_tx; u8 count; }; #define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10 /** * struct iface_combination_params - input parameters for interface combinations * * Used to pass interface combination parameters * * @num_different_channels: the number of different channels we want * to use for verification * @radar_detect: a bitmap where each bit corresponds to a channel * width where radar detection is needed, as in the definition of * &struct ieee80211_iface_combination.@radar_detect_widths * @iftype_num: array with the number of interfaces of each interface * type. The index is the interface type as specified in &enum * nl80211_iftype. * @new_beacon_int: set this to the beacon interval of a new interface * that's not operating yet, if such is to be checked as part of * the verification */ struct iface_combination_params { int num_different_channels; u8 radar_detect; int iftype_num[NUM_NL80211_IFTYPES]; u32 new_beacon_int; }; /** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. */ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), STATION_PARAM_APPLY_CAPABILITY = BIT(1), STATION_PARAM_APPLY_PLINK_STATE = BIT(2), STATION_PARAM_APPLY_STA_TXPOWER = BIT(3), }; /** * struct sta_txpwr - station txpower configuration * * Used to configure txpower for station. * * @power: tx power (in dBm) to be used for sending data traffic. If tx power * is not provided, the default per-interface tx power setting will be * overriding. Driver should be picking up the lowest tx power, either tx * power per-interface or per-station. * @type: In particular if TPC %type is NL80211_TX_POWER_LIMITED then tx power * will be less than or equal to specified from userspace, whereas if TPC * %type is NL80211_TX_POWER_AUTOMATIC then it indicates default tx power. * NL80211_TX_POWER_FIXED is not a valid configuration option for * per peer TPC. */ struct sta_txpwr { s16 power; enum nl80211_tx_power_setting type; }; /** * struct station_parameters - station parameters * * Used to change and create a new station. * * @vlan: vlan interface station should belong to * @supported_rates: supported rates in IEEE 802.11 format * (or NULL for no change) * @supported_rates_len: number of supported rates * @sta_flags_mask: station flags that changed * (bitmask of BIT(%NL80211_STA_FLAG_...)) * @sta_flags_set: station flags values * (bitmask of BIT(%NL80211_STA_FLAG_...)) * @listen_interval: listen interval or -1 for no change * @aid: AID or zero for no change * @vlan_id: VLAN ID for station (if nonzero) * @peer_aid: mesh peer AID or zero for no change * @plink_action: plink action to take * @plink_state: set the peer link state for a station * @ht_capa: HT capabilities of station * @vht_capa: VHT capabilities of station * @uapsd_queues: bitmap of queues configured for uapsd. same format * as the AC bitmap in the QoS info field * @max_sp: max Service Period. same format as the MAX_SP in the * QoS info field (but already shifted down) * @sta_modify_mask: bitmap indicating which parameters changed * (for those that don't have a natural "no change" value), * see &enum station_parameters_apply_mask * @local_pm: local link-specific mesh power save mode (no change when set * to unknown) * @capability: station capability * @ext_capab: extended capabilities of the station * @ext_capab_len: number of extended capabilities * @supported_channels: supported channels in IEEE 802.11 format * @supported_channels_len: number of supported channels * @supported_oper_classes: supported oper classes in IEEE 802.11 format * @supported_oper_classes_len: number of supported operating classes * @opmode_notif: operating mode field from Operating Mode Notification * @opmode_notif_used: information if operating mode field is used * @support_p2p_ps: information if station supports P2P PS mechanism * @he_capa: HE capabilities of station * @he_capa_len: the length of the HE capabilities * @airtime_weight: airtime scheduler weight for this station * @txpwr: transmit power for an associated station * @he_6ghz_capa: HE 6 GHz Band capabilities of station */ struct station_parameters { const u8 *supported_rates; struct net_device *vlan; u32 sta_flags_mask, sta_flags_set; u32 sta_modify_mask; int listen_interval; u16 aid; u16 vlan_id; u16 peer_aid; u8 supported_rates_len; u8 plink_action; u8 plink_state; const struct ieee80211_ht_cap *ht_capa; const struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; enum nl80211_mesh_power_mode local_pm; u16 capability; const u8 *ext_capab; u8 ext_capab_len; const u8 *supported_channels; u8 supported_channels_len; const u8 *supported_oper_classes; u8 supported_oper_classes_len; u8 opmode_notif; bool opmode_notif_used; int support_p2p_ps; const struct ieee80211_he_cap_elem *he_capa; u8 he_capa_len; u16 airtime_weight; struct sta_txpwr txpwr; const struct ieee80211_he_6ghz_capa *he_6ghz_capa; }; /** * struct station_del_parameters - station deletion parameters * * Used to delete a station entry (or all stations). * * @mac: MAC address of the station to remove or NULL to remove all stations * @subtype: Management frame subtype to use for indicating removal * (10 = Disassociation, 12 = Deauthentication) * @reason_code: Reason code for the Disassociation/Deauthentication frame */ struct station_del_parameters { const u8 *mac; u8 subtype; u16 reason_code; }; /** * enum cfg80211_station_type - the type of station being modified * @CFG80211_STA_AP_CLIENT: client of an AP interface * @CFG80211_STA_AP_CLIENT_UNASSOC: client of an AP interface that is still * unassociated (update properties for this type of client is permitted) * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has * the AP MLME in the device * @CFG80211_STA_AP_STA: AP station on managed interface * @CFG80211_STA_IBSS: IBSS station * @CFG80211_STA_TDLS_PEER_SETUP: TDLS peer on managed interface (dummy entry * while TDLS setup is in progress, it moves out of this state when * being marked authorized; use this only if TDLS with external setup is * supported/used) * @CFG80211_STA_TDLS_PEER_ACTIVE: TDLS peer on managed interface (active * entry that is operating, has been marked authorized by userspace) * @CFG80211_STA_MESH_PEER_KERNEL: peer on mesh interface (kernel managed) * @CFG80211_STA_MESH_PEER_USER: peer on mesh interface (user managed) */ enum cfg80211_station_type { CFG80211_STA_AP_CLIENT, CFG80211_STA_AP_CLIENT_UNASSOC, CFG80211_STA_AP_MLME_CLIENT, CFG80211_STA_AP_STA, CFG80211_STA_IBSS, CFG80211_STA_TDLS_PEER_SETUP, CFG80211_STA_TDLS_PEER_ACTIVE, CFG80211_STA_MESH_PEER_KERNEL, CFG80211_STA_MESH_PEER_USER, }; /** * cfg80211_check_station_change - validate parameter changes * @wiphy: the wiphy this operates on * @params: the new parameters for a station * @statype: the type of station being modified * * Utility function for the @change_station driver method. Call this function * with the appropriate station type looking up the station (and checking that * it exists). It will verify whether the station change is acceptable, and if * not will return an error code. Note that it may modify the parameters for * backward compatibility reasons, so don't use them before calling this. */ int cfg80211_check_station_change(struct wiphy *wiphy, struct station_parameters *params, enum cfg80211_station_type statype); /** * enum rate_info_flags - bitrate info flags * * Used by the driver to indicate the specific rate transmission * type for 802.11n transmissions. * * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval * @RATE_INFO_FLAGS_DMG: 60GHz MCS * @RATE_INFO_FLAGS_HE_MCS: HE MCS information * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), RATE_INFO_FLAGS_VHT_MCS = BIT(1), RATE_INFO_FLAGS_SHORT_GI = BIT(2), RATE_INFO_FLAGS_DMG = BIT(3), RATE_INFO_FLAGS_HE_MCS = BIT(4), RATE_INFO_FLAGS_EDMG = BIT(5), }; /** * enum rate_info_bw - rate bandwidth information * * Used by the driver to indicate the rate bandwidth. * * @RATE_INFO_BW_5: 5 MHz bandwidth * @RATE_INFO_BW_10: 10 MHz bandwidth * @RATE_INFO_BW_20: 20 MHz bandwidth * @RATE_INFO_BW_40: 40 MHz bandwidth * @RATE_INFO_BW_80: 80 MHz bandwidth * @RATE_INFO_BW_160: 160 MHz bandwidth * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation */ enum rate_info_bw { RATE_INFO_BW_20 = 0, RATE_INFO_BW_5, RATE_INFO_BW_10, RATE_INFO_BW_40, RATE_INFO_BW_80, RATE_INFO_BW_160, RATE_INFO_BW_HE_RU, }; /** * struct rate_info - bitrate information * * Information about a receiving or transmitting bitrate * * @flags: bitflag of flags from &enum rate_info_flags * @mcs: mcs index if struct describes an HT/VHT/HE rate * @legacy: bitrate in 100kbit/s for 802.11abg * @nss: number of streams (VHT & HE only) * @bw: bandwidth (from &enum rate_info_bw) * @he_gi: HE guard interval (from &enum nl80211_he_gi) * @he_dcm: HE DCM value * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc, * only valid if bw is %RATE_INFO_BW_HE_RU) * @n_bonded_ch: In case of EDMG the number of bonded channels (1-4) */ struct rate_info { u8 flags; u8 mcs; u16 legacy; u8 nss; u8 bw; u8 he_gi; u8 he_dcm; u8 he_ru_alloc; u8 n_bonded_ch; }; /** * enum bss_param_flags - bitrate info flags * * Used by the driver to indicate the specific rate transmission * type for 802.11n transmissions. * * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled */ enum bss_param_flags { BSS_PARAM_FLAGS_CTS_PROT = 1<<0, BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1, BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2, }; /** * struct sta_bss_parameters - BSS parameters for the attached station * * Information about the currently associated BSS * * @flags: bitflag of flags from &enum bss_param_flags * @dtim_period: DTIM period for the BSS * @beacon_interval: beacon interval */ struct sta_bss_parameters { u8 flags; u8 dtim_period; u16 beacon_interval; }; /** * struct cfg80211_txq_stats - TXQ statistics for this TID * @filled: bitmap of flags using the bits of &enum nl80211_txq_stats to * indicate the relevant values in this struct are filled * @backlog_bytes: total number of bytes currently backlogged * @backlog_packets: total number of packets currently backlogged * @flows: number of new flows seen * @drops: total number of packets dropped * @ecn_marks: total number of packets marked with ECN CE * @overlimit: number of drops due to queue space overflow * @overmemory: number of drops due to memory limit overflow * @collisions: number of hash collisions * @tx_bytes: total number of bytes dequeued * @tx_packets: total number of packets dequeued * @max_flows: maximum number of flows supported */ struct cfg80211_txq_stats { u32 filled; u32 backlog_bytes; u32 backlog_packets; u32 flows; u32 drops; u32 ecn_marks; u32 overlimit; u32 overmemory; u32 collisions; u32 tx_bytes; u32 tx_packets; u32 max_flows; }; /** * struct cfg80211_tid_stats - per-TID statistics * @filled: bitmap of flags using the bits of &enum nl80211_tid_stats to * indicate the relevant values in this struct are filled * @rx_msdu: number of received MSDUs * @tx_msdu: number of (attempted) transmitted MSDUs * @tx_msdu_retries: number of retries (not counting the first) for * transmitted MSDUs * @tx_msdu_failed: number of failed transmitted MSDUs * @txq_stats: TXQ statistics */ struct cfg80211_tid_stats { u32 filled; u64 rx_msdu; u64 tx_msdu; u64 tx_msdu_retries; u64 tx_msdu_failed; struct cfg80211_txq_stats txq_stats; }; #define IEEE80211_MAX_CHAINS 4 /** * struct station_info - station information * * Station information filled by driver for get_station() and dump_station. * * @filled: bitflag of flags using the bits of &enum nl80211_sta_info to * indicate the relevant values in this struct for them * @connected_time: time(in secs) since a station is last connected * @inactive_time: time since last station activity (tx/rx) in milliseconds * @assoc_at: bootime (ns) of the last association * @rx_bytes: bytes (size of MPDUs) received from this station * @tx_bytes: bytes (size of MPDUs) transmitted to this station * @llid: mesh local link id * @plid: mesh peer link id * @plink_state: mesh peer link state * @signal: The signal strength, type depends on the wiphy's signal_type. * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @chains: bitmask for filled values in @chain_signal, @chain_signal_avg * @chain_signal: per-chain signal strength of last received packet in dBm * @chain_signal_avg: per-chain signal strength average in dBm * @txrate: current unicast bitrate from this station * @rxrate: current unicast bitrate to this station * @rx_packets: packets (MSDUs & MMPDUs) received from this station * @tx_packets: packets (MSDUs & MMPDUs) transmitted to this station * @tx_retries: cumulative retry counts (MPDUs) * @tx_failed: number of failed transmissions (MPDUs) (retries exceeded, no ACK) * @rx_dropped_misc: Dropped for un-specified reason. * @bss_param: current BSS parameters * @generation: generation number for nl80211 dumps. * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. * @assoc_req_ies: IEs from (Re)Association Request. * This is used only when in AP mode with drivers that do not use * user space MLME/SME implementation. The information is provided for * the cfg80211_new_sta() calls to notify user space of the IEs. * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. * @sta_flags: station flags mask & values * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. * @local_pm: local mesh STA power save mode * @peer_pm: peer mesh STA power save mode * @nonpeer_pm: non-peer mesh STA power save mode * @expected_throughput: expected throughput in kbps (including 802.11 headers) * towards this station. * @rx_beacon: number of beacons received from this peer * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received * from this peer * @connected_to_gate: true if mesh STA has a path to mesh gate * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @tx_duration: aggregate PPDU duration(usecs) for all the frames to a peer * @airtime_weight: current airtime scheduling weight * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. * Note that this doesn't use the @filled bit, but is used if non-NULL. * @ack_signal: signal strength (in dBm) of the last ACK frame. * @avg_ack_signal: average rssi value of ack packet for the no of msdu's has * been sent. * @rx_mpdu_count: number of MPDUs received from this station * @fcs_err_count: number of packets (MPDUs) received from this station with * an FCS error. This counter should be incremented only when TA of the * received packet with an FCS error matches the peer MAC address. * @airtime_link_metric: mesh airtime link metric. * @connected_to_as: true if mesh STA has a path to authentication server */ struct station_info { u64 filled; u32 connected_time; u32 inactive_time; u64 assoc_at; u64 rx_bytes; u64 tx_bytes; u16 llid; u16 plid; u8 plink_state; s8 signal; s8 signal_avg; u8 chains; s8 chain_signal[IEEE80211_MAX_CHAINS]; s8 chain_signal_avg[IEEE80211_MAX_CHAINS]; struct rate_info txrate; struct rate_info rxrate; u32 rx_packets; u32 tx_packets; u32 tx_retries; u32 tx_failed; u32 rx_dropped_misc; struct sta_bss_parameters bss_param; struct nl80211_sta_flag_update sta_flags; int generation; const u8 *assoc_req_ies; size_t assoc_req_ies_len; u32 beacon_loss_count; s64 t_offset; enum nl80211_mesh_power_mode local_pm; enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; u32 expected_throughput; u64 tx_duration; u64 rx_duration; u64 rx_beacon; u8 rx_beacon_signal_avg; u8 connected_to_gate; struct cfg80211_tid_stats *pertid; s8 ack_signal; s8 avg_ack_signal; u16 airtime_weight; u32 rx_mpdu_count; u32 fcs_err_count; u32 airtime_link_metric; u8 connected_to_as; }; #if IS_ENABLED(CONFIG_CFG80211) /** * cfg80211_get_station - retrieve information about a given station * @dev: the device where the station is supposed to be connected to * @mac_addr: the mac address of the station of interest * @sinfo: pointer to the structure to fill with the information * * Returns 0 on success and sinfo is filled with the available information * otherwise returns a negative error code and the content of sinfo has to be * considered undefined. */ int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, struct station_info *sinfo); #else static inline int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, struct station_info *sinfo) { return -ENOENT; } #endif /** * enum monitor_flags - monitor flags * * Monitor interface configuration flags. Note that these must be the bits * according to the nl80211 flags. * * @MONITOR_FLAG_CHANGED: set if the flags were changed * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP * @MONITOR_FLAG_CONTROL: pass control frames * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering * @MONITOR_FLAG_COOK_FRAMES: report frames after processing * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address */ enum monitor_flags { MONITOR_FLAG_CHANGED = 1<<__NL80211_MNTR_FLAG_INVALID, MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL, MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL, MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL, MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS, MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES, MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE, }; /** * enum mpath_info_flags - mesh path information flags * * Used by the driver to indicate which info in &struct mpath_info it has filled * in during get_station() or dump_station(). * * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled * @MPATH_INFO_SN: @sn filled * @MPATH_INFO_METRIC: @metric filled * @MPATH_INFO_EXPTIME: @exptime filled * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled * @MPATH_INFO_FLAGS: @flags filled * @MPATH_INFO_HOP_COUNT: @hop_count filled * @MPATH_INFO_PATH_CHANGE: @path_change_count filled */ enum mpath_info_flags { MPATH_INFO_FRAME_QLEN = BIT(0), MPATH_INFO_SN = BIT(1), MPATH_INFO_METRIC = BIT(2), MPATH_INFO_EXPTIME = BIT(3), MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4), MPATH_INFO_DISCOVERY_RETRIES = BIT(5), MPATH_INFO_FLAGS = BIT(6), MPATH_INFO_HOP_COUNT = BIT(7), MPATH_INFO_PATH_CHANGE = BIT(8), }; /** * struct mpath_info - mesh path information * * Mesh path information filled by driver for get_mpath() and dump_mpath(). * * @filled: bitfield of flags from &enum mpath_info_flags * @frame_qlen: number of queued frames for this destination * @sn: target sequence number * @metric: metric (cost) of this mesh path * @exptime: expiration time for the mesh path from now, in msecs * @flags: mesh path flags * @discovery_timeout: total mesh path discovery timeout, in msecs * @discovery_retries: mesh path discovery retries * @generation: generation number for nl80211 dumps. * This number should increase every time the list of mesh paths * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. * @hop_count: hops to destination * @path_change_count: total number of path changes to destination */ struct mpath_info { u32 filled; u32 frame_qlen; u32 sn; u32 metric; u32 exptime; u32 discovery_timeout; u8 discovery_retries; u8 flags; u8 hop_count; u32 path_change_count; int generation; }; /** * struct bss_parameters - BSS parameters * * Used to change BSS parameters (mainly for AP mode). * * @use_cts_prot: Whether to use CTS protection * (0 = no, 1 = yes, -1 = do not change) * @use_short_preamble: Whether the use of short preambles is allowed * (0 = no, 1 = yes, -1 = do not change) * @use_short_slot_time: Whether the use of short slot time is allowed * (0 = no, 1 = yes, -1 = do not change) * @basic_rates: basic rates in IEEE 802.11 format * (or NULL for no change) * @basic_rates_len: number of basic rates * @ap_isolate: do not forward packets between connected stations * (0 = no, 1 = yes, -1 = do not change) * @ht_opmode: HT Operation mode * (u16 = opmode, -1 = do not change) * @p2p_ctwindow: P2P CT Window (-1 = no change) * @p2p_opp_ps: P2P opportunistic PS (-1 = no change) */ struct bss_parameters { int use_cts_prot; int use_short_preamble; int use_short_slot_time; const u8 *basic_rates; u8 basic_rates_len; int ap_isolate; int ht_opmode; s8 p2p_ctwindow, p2p_opp_ps; }; /** * struct mesh_config - 802.11s mesh configuration * * These parameters can be changed while the mesh is active. * * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used * by the Mesh Peering Open message * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units * used by the Mesh Peering Open message * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by * the mesh peering management to close a mesh peering * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this * mesh interface * @dot11MeshMaxRetries: the maximum number of peer link open retries that can * be sent to establish a new peer link instance in a mesh * @dot11MeshTTL: the value of TTL field set at a source mesh STA * @element_ttl: the value of TTL field set at a mesh STA for path selection * elements * @auto_open_plinks: whether we should automatically open peer links when we * detect compatible mesh peers * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to * synchronize to for 11s default synchronization method * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ * that an originator mesh STA can send to a particular path target * @path_refresh_time: how frequently to refresh mesh paths in milliseconds * @min_discovery_timeout: the minimum length of time to wait until giving up on * a path discovery in milliseconds * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs * receiving a PREQ shall consider the forwarding information from the * root to be valid. (TU = time unit) * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during * which a mesh STA can send only one action frame containing a PREQ * element * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during * which a mesh STA can send only one Action frame containing a PERR * element * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that * it takes for an HWMP information element to propagate across the mesh * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root * announcements are transmitted * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh * station has access to a broader network beyond the MBSS. (This is * missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true * only means that the station will announce others it's a mesh gate, but * not necessarily using the gate announcement protocol. Still keeping the * same nomenclature to be in sync with the spec) * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding * entity (default is TRUE - forwarding entity) * @rssi_threshold: the threshold for average signal strength of candidate * station to establish a peer link * @ht_opmode: mesh HT protection mode * * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs * receiving a proactive PREQ shall consider the forwarding information to * the root mesh STA to be valid. * * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive * PREQs are transmitted. * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) * during which a mesh STA can send only one Action frame containing * a PREQ element for root path confirmation. * @power_mode: The default mesh power save mode which will be the initial * setting for new peer links. * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake * after transmitting its beacon. * @plink_timeout: If no tx activity is seen from a STA we've established * peering with for longer than this time (in seconds), then remove it * from the STA's list of peers. Default is 30 minutes. * @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is * connected to a mesh gate in mesh formation info. If false, the * value in mesh formation is determined by the presence of root paths * in the mesh path table * @dot11MeshNolearn: Try to avoid multi-hop path discovery (e.g. PREQ/PREP * for HWMP) if the destination is a direct neighbor. Note that this might * not be the optimal decision as a multi-hop route might be better. So * if using this setting you will likely also want to disable * dot11MeshForwarding and use another mesh routing protocol on top. */ struct mesh_config { u16 dot11MeshRetryTimeout; u16 dot11MeshConfirmTimeout; u16 dot11MeshHoldingTimeout; u16 dot11MeshMaxPeerLinks; u8 dot11MeshMaxRetries; u8 dot11MeshTTL; u8 element_ttl; bool auto_open_plinks; u32 dot11MeshNbrOffsetMaxNeighbor; u8 dot11MeshHWMPmaxPREQretries; u32 path_refresh_time; u16 min_discovery_timeout; u32 dot11MeshHWMPactivePathTimeout; u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPperrMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; u8 dot11MeshHWMPRootMode; bool dot11MeshConnectedToMeshGate; bool dot11MeshConnectedToAuthServer; u16 dot11MeshHWMPRannInterval; bool dot11MeshGateAnnouncementProtocol; bool dot11MeshForwarding; s32 rssi_threshold; u16 ht_opmode; u32 dot11MeshHWMPactivePathToRootTimeout; u16 dot11MeshHWMProotInterval; u16 dot11MeshHWMPconfirmationInterval; enum nl80211_mesh_power_mode power_mode; u16 dot11MeshAwakeWindowDuration; u32 plink_timeout; bool dot11MeshNolearn; }; /** * struct mesh_setup - 802.11s mesh setup configuration * @chandef: defines the channel to use * @mesh_id: the mesh ID * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes * @sync_method: which synchronization method to use * @path_sel_proto: which path selection protocol to use * @path_metric: which metric to use * @auth_id: which authentication method this mesh is using * @ie: vendor information elements (optional) * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication * @is_secure: this mesh uses security * @user_mpm: userspace handles all MPM functions * @dtim_period: DTIM period to use * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * @basic_rates: basic rates to use when creating the mesh * @beacon_rate: bitrate to be used for beacons * @userspace_handles_dfs: whether user space controls DFS operation, i.e. * changes the channel when a radar is detected. This is required * to operate on DFS channels. * @control_port_over_nl80211: TRUE if userspace expects to exchange control * port frames over NL80211 instead of the network interface. * * These parameters are fixed when the mesh is created. */ struct mesh_setup { struct cfg80211_chan_def chandef; const u8 *mesh_id; u8 mesh_id_len; u8 sync_method; u8 path_sel_proto; u8 path_metric; u8 auth_id; const u8 *ie; u8 ie_len; bool is_authenticated; bool is_secure; bool user_mpm; u8 dtim_period; u16 beacon_interval; int mcast_rate[NUM_NL80211_BANDS]; u32 basic_rates; struct cfg80211_bitrate_mask beacon_rate; bool userspace_handles_dfs; bool control_port_over_nl80211; }; /** * struct ocb_setup - 802.11p OCB mode setup configuration * @chandef: defines the channel to use * * These parameters are fixed when connecting to the network */ struct ocb_setup { struct cfg80211_chan_def chandef; }; /** * struct ieee80211_txq_params - TX queue parameters * @ac: AC identifier * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range * 1..32767] * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range * 1..32767] * @aifs: Arbitration interframe space [0..255] */ struct ieee80211_txq_params { enum nl80211_ac ac; u16 txop; u16 cwmin; u16 cwmax; u8 aifs; }; /** * DOC: Scanning and BSS list handling * * The scanning process itself is fairly simple, but cfg80211 offers quite * a bit of helper functionality. To start a scan, the scan operation will * be invoked with a scan definition. This scan definition contains the * channels to scan, and the SSIDs to send probe requests for (including the * wildcard, if desired). A passive scan is indicated by having no SSIDs to * probe. Additionally, a scan request may contain extra information elements * that should be added to the probe request. The IEs are guaranteed to be * well-formed, and will not exceed the maximum length the driver advertised * in the wiphy structure. * * When scanning finds a BSS, cfg80211 needs to be notified of that, because * it is responsible for maintaining the BSS list; the driver should not * maintain a list itself. For this notification, various functions exist. * * Since drivers do not maintain a BSS list, there are also a number of * functions to search for a BSS and obtain information about it from the * BSS structure cfg80211 maintains. The BSS list is also made available * to userspace. */ /** * struct cfg80211_ssid - SSID description * @ssid: the SSID * @ssid_len: length of the ssid */ struct cfg80211_ssid { u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len; }; /** * struct cfg80211_scan_info - information about completed scan * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the * wireless device that requested the scan is connected to. If this * information is not available, this field is left zero. * @tsf_bssid: the BSSID according to which %scan_start_tsf is set. * @aborted: set to true if the scan was aborted for any reason, * userspace will be notified of that */ struct cfg80211_scan_info { u64 scan_start_tsf; u8 tsf_bssid[ETH_ALEN] __aligned(2); bool aborted; }; /** * struct cfg80211_scan_6ghz_params - relevant for 6 GHz only * * @short_bssid: short ssid to scan for * @bssid: bssid to scan for * @channel_idx: idx of the channel in the channel array in the scan request * which the above info relvant to * @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU * @short_ssid_valid: short_ssid is valid and can be used * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait * 20 TUs before starting to send probe requests. */ struct cfg80211_scan_6ghz_params { u32 short_ssid; u32 channel_idx; u8 bssid[ETH_ALEN]; bool unsolicited_probe; bool short_ssid_valid; bool psc_no_listen; }; /** * struct cfg80211_scan_request - scan request description * * @ssids: SSIDs to scan for (active scan only) * @n_ssids: number of SSIDs * @channels: channels to scan on. * @n_channels: total number of channels to scan * @scan_width: channel width for scanning * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets * @duration: how long to listen on each channel, in TUs. If * %duration_mandatory is not set, this is the maximum dwell time and * the actual dwell time may be shorter. * @duration_mandatory: if set, the scan duration must be as specified by the * %duration field. * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for * @info: (internal) information about completed scan * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band * @mac_addr: MAC address used with randomisation * @mac_addr_mask: MAC address mask used with randomisation, bits that * are 0 in the mask should be randomised, bits that are 1 should * be taken from the @mac_addr * @scan_6ghz: relevant for split scan request only, * true if this is the second scan request * @n_6ghz_params: number of 6 GHz params * @scan_6ghz_params: 6 GHz params * @bssid: BSSID to scan for (most commonly, the wildcard BSSID) */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; int n_ssids; u32 n_channels; enum nl80211_bss_scan_width scan_width; const u8 *ie; size_t ie_len; u16 duration; bool duration_mandatory; u32 flags; u32 rates[NUM_NL80211_BANDS]; struct wireless_dev *wdev; u8 mac_addr[ETH_ALEN] __aligned(2); u8 mac_addr_mask[ETH_ALEN] __aligned(2); u8 bssid[ETH_ALEN] __aligned(2); /* internal */ struct wiphy *wiphy; unsigned long scan_start; struct cfg80211_scan_info info; bool notified; bool no_cck; bool scan_6ghz; u32 n_6ghz_params; struct cfg80211_scan_6ghz_params *scan_6ghz_params; /* keep last */ struct ieee80211_channel *channels[]; }; static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) { int i; get_random_bytes(buf, ETH_ALEN); for (i = 0; i < ETH_ALEN; i++) { buf[i] &= ~mask[i]; buf[i] |= addr[i] & mask[i]; } } /** * struct cfg80211_match_set - sets of attributes to match * * @ssid: SSID to be matched; may be zero-length in case of BSSID match * or no match (RSSI only) * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match * or no match (RSSI only) * @rssi_thold: don't report scan results below this threshold (in s32 dBm) * @per_band_rssi_thold: Minimum rssi threshold for each band to be applied * for filtering out scan results received. Drivers advertize this support * of band specific rssi based filtering through the feature capability * %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These band * specific rssi thresholds take precedence over rssi_thold, if specified. * If not specified for any band, it will be assigned with rssi_thold of * corresponding matchset. */ struct cfg80211_match_set { struct cfg80211_ssid ssid; u8 bssid[ETH_ALEN]; s32 rssi_thold; s32 per_band_rssi_thold[NUM_NL80211_BANDS]; }; /** * struct cfg80211_sched_scan_plan - scan plan for scheduled scan * * @interval: interval between scheduled scan iterations. In seconds. * @iterations: number of scan iterations in this scan plan. Zero means * infinite loop. * The last scan plan will always have this parameter set to zero, * all other scan plans will have a finite number of iterations. */ struct cfg80211_sched_scan_plan { u32 interval; u32 iterations; }; /** * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment. * * @band: band of BSS which should match for RSSI level adjustment. * @delta: value of RSSI level adjustment. */ struct cfg80211_bss_select_adjust { enum nl80211_band band; s8 delta; }; /** * struct cfg80211_sched_scan_request - scheduled scan request description * * @reqid: identifies this request. * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) * @n_ssids: number of SSIDs * @n_channels: total number of channels to scan * @scan_width: channel width for scanning * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets * @flags: bit field of flags controlling operation * @match_sets: sets of parameters to be matched for a scan result * entry to be considered valid and to be passed to the host * (others are filtered out). * If ommited, all results are passed. * @n_match_sets: number of match sets * @report_results: indicates that results were reported for this request * @wiphy: the wiphy this was for * @dev: the interface * @scan_start: start time of the scheduled scan * @channels: channels to scan * @min_rssi_thold: for drivers only supporting a single threshold, this * contains the minimum over all matchsets * @mac_addr: MAC address used with randomisation * @mac_addr_mask: MAC address mask used with randomisation, bits that * are 0 in the mask should be randomised, bits that are 1 should * be taken from the @mac_addr * @scan_plans: scan plans to be executed in this scheduled scan. Lowest * index must be executed first. * @n_scan_plans: number of scan plans, at least 1. * @rcu_head: RCU callback used to free the struct * @owner_nlportid: netlink portid of owner (if this should is a request * owned by a particular socket) * @nl_owner_dead: netlink owner socket was closed - this request be freed * @list: for keeping list of requests. * @delay: delay in seconds to use before starting the first scan * cycle. The driver may ignore this parameter and start * immediately (or at any other time), if this feature is not * supported. * @relative_rssi_set: Indicates whether @relative_rssi is set or not. * @relative_rssi: Relative RSSI threshold in dB to restrict scan result * reporting in connected state to cases where a matching BSS is determined * to have better or slightly worse RSSI than the current connected BSS. * The relative RSSI threshold values are ignored in disconnected state. * @rssi_adjust: delta dB of RSSI preference to be given to the BSSs that belong * to the specified band while deciding whether a better BSS is reported * using @relative_rssi. If delta is a negative number, the BSSs that * belong to the specified band will be penalized by delta dB in relative * comparisions. */ struct cfg80211_sched_scan_request { u64 reqid; struct cfg80211_ssid *ssids; int n_ssids; u32 n_channels; enum nl80211_bss_scan_width scan_width; const u8 *ie; size_t ie_len; u32 flags; struct cfg80211_match_set *match_sets; int n_match_sets; s32 min_rssi_thold; u32 delay; struct cfg80211_sched_scan_plan *scan_plans; int n_scan_plans; u8 mac_addr[ETH_ALEN] __aligned(2); u8 mac_addr_mask[ETH_ALEN] __aligned(2); bool relative_rssi_set; s8 relative_rssi; struct cfg80211_bss_select_adjust rssi_adjust; /* internal */ struct wiphy *wiphy; struct net_device *dev; unsigned long scan_start; bool report_results; struct rcu_head rcu_head; u32 owner_nlportid; bool nl_owner_dead; struct list_head list; /* keep last */ struct ieee80211_channel *channels[]; }; /** * enum cfg80211_signal_type - signal type * * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm) * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100 */ enum cfg80211_signal_type { CFG80211_SIGNAL_TYPE_NONE, CFG80211_SIGNAL_TYPE_MBM, CFG80211_SIGNAL_TYPE_UNSPEC, }; /** * struct cfg80211_inform_bss - BSS inform data * @chan: channel the frame was received on * @scan_width: scan width that was used * @signal: signal strength value, according to the wiphy's * signal type * @boottime_ns: timestamp (CLOCK_BOOTTIME) when the information was * received; should match the time when the frame was actually * received by the device (not just by the host, in case it was * buffered on the device) and be accurate to about 10ms. * If the frame isn't buffered, just passing the return value of * ktime_get_boottime_ns() is likely appropriate. * @parent_tsf: the time at the start of reception of the first octet of the * timestamp field of the frame. The time is the TSF of the BSS specified * by %parent_bssid. * @parent_bssid: the BSS according to which %parent_tsf is set. This is set to * the BSS that requested the scan in which the beacon/probe was received. * @chains: bitmask for filled values in @chain_signal. * @chain_signal: per-chain signal strength of last received BSS in dBm. */ struct cfg80211_inform_bss { struct ieee80211_channel *chan; enum nl80211_bss_scan_width scan_width; s32 signal; u64 boottime_ns; u64 parent_tsf; u8 parent_bssid[ETH_ALEN] __aligned(2); u8 chains; s8 chain_signal[IEEE80211_MAX_CHAINS]; }; /** * struct cfg80211_bss_ies - BSS entry IE data * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing * @len: length of the IEs * @from_beacon: these IEs are known to come from a beacon * @data: IE data */ struct cfg80211_bss_ies { u64 tsf; struct rcu_head rcu_head; int len; bool from_beacon; u8 data[]; }; /** * struct cfg80211_bss - BSS description * * This structure describes a BSS (which may also be a mesh network) * for use in scan results and similar. * * @channel: channel this BSS is on * @scan_width: width of the control channel * @bssid: BSSID of the BSS * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order * @ies: the information elements (Note that there is no guarantee that these * are well-formed!); this is a pointer to either the beacon_ies or * proberesp_ies depending on whether Probe Response frame has been * received. It is always non-%NULL. * @beacon_ies: the information elements from the last Beacon frame * (implementation note: if @hidden_beacon_bss is set this struct doesn't * own the beacon_ies, but they're just pointers to the ones from the * @hidden_beacon_bss struct) * @proberesp_ies: the information elements from the last Probe Response frame * @hidden_beacon_bss: in case this BSS struct represents a probe response from * a BSS that hides the SSID in its beacon, this points to the BSS struct * that holds the beacon data. @beacon_ies is still valid, of course, and * points to the same data as hidden_beacon_bss->beacon_ies in that case. * @transmitted_bss: pointer to the transmitted BSS, if this is a * non-transmitted one (multi-BSSID support) * @nontrans_list: list of non-transmitted BSS, if this is a transmitted one * (multi-BSSID support) * @signal: signal strength value (type depends on the wiphy's signal_type) * @chains: bitmask for filled values in @chain_signal. * @chain_signal: per-chain signal strength of last received BSS in dBm. * @bssid_index: index in the multiple BSS set * @max_bssid_indicator: max number of members in the BSS set * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { struct ieee80211_channel *channel; enum nl80211_bss_scan_width scan_width; const struct cfg80211_bss_ies __rcu *ies; const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; struct cfg80211_bss *hidden_beacon_bss; struct cfg80211_bss *transmitted_bss; struct list_head nontrans_list; s32 signal; u16 beacon_interval; u16 capability; u8 bssid[ETH_ALEN]; u8 chains; s8 chain_signal[IEEE80211_MAX_CHAINS]; u8 bssid_index; u8 max_bssid_indicator; u8 priv[] __aligned(sizeof(void *)); }; /** * ieee80211_bss_get_elem - find element with given ID * @bss: the bss to search * @id: the element ID * * Note that the return value is an RCU-protected pointer, so * rcu_read_lock() must be held when calling this function. * Return: %NULL if not found. */ const struct element *ieee80211_bss_get_elem(struct cfg80211_bss *bss, u8 id); /** * ieee80211_bss_get_ie - find IE with given ID * @bss: the bss to search * @id: the element ID * * Note that the return value is an RCU-protected pointer, so * rcu_read_lock() must be held when calling this function. * Return: %NULL if not found. */ static inline const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 id) { return (void *)ieee80211_bss_get_elem(bss, id); } /** * struct cfg80211_auth_request - Authentication request data * * This structure provides information needed to complete IEEE 802.11 * authentication. * * @bss: The BSS to authenticate with, the callee must obtain a reference * to it if it needs to keep it. * @auth_type: Authentication type (algorithm) * @ie: Extra IEs to add to Authentication frame or %NULL * @ie_len: Length of ie buffer in octets * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication * @auth_data: Fields and elements in Authentication frames. This contains * the authentication frame body (non-IE and IE data), excluding the * Authentication algorithm number, i.e., starting at the Authentication * transaction sequence number field. * @auth_data_len: Length of auth_data buffer in octets */ struct cfg80211_auth_request { struct cfg80211_bss *bss; const u8 *ie; size_t ie_len; enum nl80211_auth_type auth_type; const u8 *key; u8 key_len, key_idx; const u8 *auth_data; size_t auth_data_len; }; /** * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association. * * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external * authentication capability. Drivers can offload authentication to * userspace if this flag is set. Only applicable for cfg80211_connect() * request (connect callback). */ enum cfg80211_assoc_req_flags { ASSOC_REQ_DISABLE_HT = BIT(0), ASSOC_REQ_DISABLE_VHT = BIT(1), ASSOC_REQ_USE_RRM = BIT(2), CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), }; /** * struct cfg80211_assoc_request - (Re)Association request data * * This structure provides information needed to complete IEEE 802.11 * (re)association. * @bss: The BSS to associate with. If the call is successful the driver is * given a reference that it must give back to cfg80211_send_rx_assoc() * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new * association requests while already associating must be rejected. * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association * @crypto: crypto settings * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used * to indicate a request to reassociate within the ESS instead of a request * do the initial association with the ESS. When included, this is set to * the BSSID of the current association, i.e., to the value that is * included in the Current AP address field of the Reassociation Request * frame. * @flags: See &enum cfg80211_assoc_req_flags * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT capability override * @vht_capa_mask: VHT capability mask indicating which fields to use * @fils_kek: FILS KEK for protecting (Re)Association Request/Response frame or * %NULL if FILS is not used. * @fils_kek_len: Length of fils_kek in octets * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association * Request/Response frame or %NULL if FILS is not used. This field starts * with 16 octets of STA Nonce followed by 16 octets of AP Nonce. * @s1g_capa: S1G capability override * @s1g_capa_mask: S1G capability override mask */ struct cfg80211_assoc_request { struct cfg80211_bss *bss; const u8 *ie, *prev_bssid; size_t ie_len; struct cfg80211_crypto_settings crypto; bool use_mfp; u32 flags; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa, vht_capa_mask; const u8 *fils_kek; size_t fils_kek_len; const u8 *fils_nonces; struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask; }; /** * struct cfg80211_deauth_request - Deauthentication request data * * This structure provides information needed to complete IEEE 802.11 * deauthentication. * * @bssid: the BSSID of the BSS to deauthenticate from * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication * @local_state_change: if set, change local state only and * do not set a deauth frame */ struct cfg80211_deauth_request { const u8 *bssid; const u8 *ie; size_t ie_len; u16 reason_code; bool local_state_change; }; /** * struct cfg80211_disassoc_request - Disassociation request data * * This structure provides information needed to complete IEEE 802.11 * disassociation. * * @bss: the BSS to disassociate from * @ie: Extra IEs to add to Disassociation frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the disassociation * @local_state_change: This is a request for a local state only, i.e., no * Disassociation frame is to be transmitted. */ struct cfg80211_disassoc_request { struct cfg80211_bss *bss; const u8 *ie; size_t ie_len; u16 reason_code; bool local_state_change; }; /** * struct cfg80211_ibss_params - IBSS parameters * * This structure defines the IBSS parameters for the join_ibss() * method. * * @ssid: The SSID, will always be non-null. * @ssid_len: The length of the SSID, will always be non-zero. * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not * search for IBSSs with a different BSSID. * @chandef: defines the channel to use if no other IBSS to join can be found * @channel_fixed: The channel should be fixed -- do not search for * IBSSs to join on other channels. * @ie: information element(s) to include in the beacon * @ie_len: length of that * @beacon_interval: beacon interval to use * @privacy: this is a protected network, keys will be configured * after joining * @control_port: whether user space controls IEEE 802.1X port, i.e., * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is * required to assume that the port is unauthorized until authorized by * user space. Otherwise, port is marked authorized by default. * @control_port_over_nl80211: TRUE if userspace expects to exchange control * port frames over NL80211 instead of the network interface. * @userspace_handles_dfs: whether user space controls DFS operation, i.e. * changes the channel when a radar is detected. This is required * to operate on DFS channels. * @basic_rates: bitmap of basic rates to use when creating the IBSS * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @wep_keys: static WEP keys, if not NULL points to an array of * CFG80211_MAX_WEP_KEYS WEP keys * @wep_tx_key: key index (0..3) of the default TX static WEP key */ struct cfg80211_ibss_params { const u8 *ssid; const u8 *bssid; struct cfg80211_chan_def chandef; const u8 *ie; u8 ssid_len, ie_len; u16 beacon_interval; u32 basic_rates; bool channel_fixed; bool privacy; bool control_port; bool control_port_over_nl80211; bool userspace_handles_dfs; int mcast_rate[NUM_NL80211_BANDS]; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; struct key_params *wep_keys; int wep_tx_key; }; /** * struct cfg80211_bss_selection - connection parameters for BSS selection. * * @behaviour: requested BSS selection behaviour. * @param: parameters for requestion behaviour. * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF. * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST. */ struct cfg80211_bss_selection { enum nl80211_bss_select_attr behaviour; union { enum nl80211_band band_pref; struct cfg80211_bss_select_adjust adjust; } param; }; /** * struct cfg80211_connect_params - Connection parameters * * This structure provides information needed to complete IEEE 802.11 * authentication and association. * * @channel: The channel to use or %NULL if not specified (auto-select based * on scan results) * @channel_hint: The channel of the recommended BSS for initial connection or * %NULL if not specified * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan * results) * @bssid_hint: The recommended AP BSSID for initial connection to the BSS or * %NULL if not specified. Unlike the @bssid parameter, the driver is * allowed to ignore this @bssid_hint if it has knowledge of a better BSS * to use. * @ssid: SSID * @ssid_len: Length of ssid in octets * @auth_type: Authentication type (algorithm) * @ie: IEs for association request * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used * @mfp: indicate whether management frame protection is used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication * @flags: See &enum cfg80211_assoc_req_flags * @bg_scan_period: Background scan period in seconds * or -1 to indicate that default value is to be used. * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT Capability overrides * @vht_capa_mask: The bits of vht_capa which are to be used. * @pbss: if set, connect to a PCP instead of AP. Valid for DMG * networks. * @bss_select: criteria to be used for BSS selection. * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used * to indicate a request to reassociate within the ESS instead of a request * do the initial association with the ESS. When included, this is set to * the BSSID of the current association, i.e., to the value that is * included in the Current AP address field of the Reassociation Request * frame. * @fils_erp_username: EAP re-authentication protocol (ERP) username part of the * NAI or %NULL if not specified. This is used to construct FILS wrapped * data IE. * @fils_erp_username_len: Length of @fils_erp_username in octets. * @fils_erp_realm: EAP re-authentication protocol (ERP) realm part of NAI or * %NULL if not specified. This specifies the domain name of ER server and * is used to construct FILS wrapped data IE. * @fils_erp_realm_len: Length of @fils_erp_realm in octets. * @fils_erp_next_seq_num: The next sequence number to use in the FILS ERP * messages. This is also used to construct FILS wrapped data IE. * @fils_erp_rrk: ERP re-authentication Root Key (rRK) used to derive additional * keys in FILS or %NULL if not specified. * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets. * @want_1x: indicates user-space supports and wants to use 802.1X driver * offload of 4-way handshake. * @edmg: define the EDMG channels. * This may specify multiple channels and bonding options for the driver * to choose from, based on BSS configuration. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; struct ieee80211_channel *channel_hint; const u8 *bssid; const u8 *bssid_hint; const u8 *ssid; size_t ssid_len; enum nl80211_auth_type auth_type; const u8 *ie; size_t ie_len; bool privacy; enum nl80211_mfp mfp; struct cfg80211_crypto_settings crypto; const u8 *key; u8 key_len, key_idx; u32 flags; int bg_scan_period; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa; struct ieee80211_vht_cap vht_capa_mask; bool pbss; struct cfg80211_bss_selection bss_select; const u8 *prev_bssid; const u8 *fils_erp_username; size_t fils_erp_username_len; const u8 *fils_erp_realm; size_t fils_erp_realm_len; u16 fils_erp_next_seq_num; const u8 *fils_erp_rrk; size_t fils_erp_rrk_len; bool want_1x; struct ieee80211_edmg edmg; }; /** * enum cfg80211_connect_params_changed - Connection parameters being updated * * This enum provides information of all connect parameters that * have to be updated as part of update_connect_params() call. * * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated * @UPDATE_FILS_ERP_INFO: Indicates that FILS connection parameters (realm, * username, erp sequence number and rrk) are updated * @UPDATE_AUTH_TYPE: Indicates that authentication type is updated */ enum cfg80211_connect_params_changed { UPDATE_ASSOC_IES = BIT(0), UPDATE_FILS_ERP_INFO = BIT(1), UPDATE_AUTH_TYPE = BIT(2), }; /** * enum wiphy_params_flags - set_wiphy_params bitfield values * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed * @WIPHY_PARAM_DYN_ACK: dynack has been enabled * @WIPHY_PARAM_TXQ_LIMIT: TXQ packet limit has been changed * @WIPHY_PARAM_TXQ_MEMORY_LIMIT: TXQ memory limit has been changed * @WIPHY_PARAM_TXQ_QUANTUM: TXQ scheduler quantum */ enum wiphy_params_flags { WIPHY_PARAM_RETRY_SHORT = 1 << 0, WIPHY_PARAM_RETRY_LONG = 1 << 1, WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, WIPHY_PARAM_DYN_ACK = 1 << 5, WIPHY_PARAM_TXQ_LIMIT = 1 << 6, WIPHY_PARAM_TXQ_MEMORY_LIMIT = 1 << 7, WIPHY_PARAM_TXQ_QUANTUM = 1 << 8, }; #define IEEE80211_DEFAULT_AIRTIME_WEIGHT 256 /* The per TXQ device queue limit in airtime */ #define IEEE80211_DEFAULT_AQL_TXQ_LIMIT_L 5000 #define IEEE80211_DEFAULT_AQL_TXQ_LIMIT_H 12000 /* The per interface airtime threshold to switch to lower queue limit */ #define IEEE80211_AQL_THRESHOLD 24000 /** * struct cfg80211_pmksa - PMK Security Association * * This structure is passed to the set/del_pmksa() method for PMKSA * caching. * * @bssid: The AP's BSSID (may be %NULL). * @pmkid: The identifier to refer a PMKSA. * @pmk: The PMK for the PMKSA identified by @pmkid. This is used for key * derivation by a FILS STA. Otherwise, %NULL. * @pmk_len: Length of the @pmk. The length of @pmk can differ depending on * the hash algorithm used to generate this. * @ssid: SSID to specify the ESS within which a PMKSA is valid when using FILS * cache identifier (may be %NULL). * @ssid_len: Length of the @ssid in octets. * @cache_id: 2-octet cache identifier advertized by a FILS AP identifying the * scope of PMKSA. This is valid only if @ssid_len is non-zero (may be * %NULL). * @pmk_lifetime: Maximum lifetime for PMKSA in seconds * (dot11RSNAConfigPMKLifetime) or 0 if not specified. * The configured PMKSA must not be used for PMKSA caching after * expiration and any keys derived from this PMK become invalid on * expiration, i.e., the current association must be dropped if the PMK * used for it expires. * @pmk_reauth_threshold: Threshold time for reauthentication (percentage of * PMK lifetime, dot11RSNAConfigPMKReauthThreshold) or 0 if not specified. * Drivers are expected to trigger a full authentication instead of using * this PMKSA for caching when reassociating to a new BSS after this * threshold to generate a new PMK before the current one expires. */ struct cfg80211_pmksa { const u8 *bssid; const u8 *pmkid; const u8 *pmk; size_t pmk_len; const u8 *ssid; size_t ssid_len; const u8 *cache_id; u32 pmk_lifetime; u8 pmk_reauth_threshold; }; /** * struct cfg80211_pkt_pattern - packet pattern * @mask: bitmask where to match pattern and where to ignore bytes, * one bit per byte, in same format as nl80211 * @pattern: bytes to match where bitmask is 1 * @pattern_len: length of pattern (in bytes) * @pkt_offset: packet offset (in bytes) * * Internal note: @mask and @pattern are allocated in one chunk of * memory, free @mask only! */ struct cfg80211_pkt_pattern { const u8 *mask, *pattern; int pattern_len; int pkt_offset; }; /** * struct cfg80211_wowlan_tcp - TCP connection parameters * * @sock: (internal) socket for source port allocation * @src: source IP address * @dst: destination IP address * @dst_mac: destination MAC address * @src_port: source port * @dst_port: destination port * @payload_len: data payload length * @payload: data payload buffer * @payload_seq: payload sequence stamping configuration * @data_interval: interval at which to send data packets * @wake_len: wakeup payload match length * @wake_data: wakeup payload match data * @wake_mask: wakeup payload match mask * @tokens_size: length of the tokens buffer * @payload_tok: payload token usage configuration */ struct cfg80211_wowlan_tcp { struct socket *sock; __be32 src, dst; u16 src_port, dst_port; u8 dst_mac[ETH_ALEN]; int payload_len; const u8 *payload; struct nl80211_wowlan_tcp_data_seq payload_seq; u32 data_interval; u32 wake_len; const u8 *wake_data, *wake_mask; u32 tokens_size; /* must be last, variable member */ struct nl80211_wowlan_tcp_data_token payload_tok; }; /** * struct cfg80211_wowlan - Wake on Wireless-LAN support info * * This structure defines the enabled WoWLAN triggers for the device. * @any: wake up on any activity -- special trigger if device continues * operating as normal during suspend * @disconnect: wake up if getting disconnected * @magic_pkt: wake up on receiving magic packet * @patterns: wake up on receiving packet matching a pattern * @n_patterns: number of patterns * @gtk_rekey_failure: wake up on GTK rekey failure * @eap_identity_req: wake up on EAP identity request packet * @four_way_handshake: wake up on 4-way handshake * @rfkill_release: wake up when rfkill is released * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. * NULL if not configured. * @nd_config: configuration for the scan to be used for net detect wake. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, rfkill_release; struct cfg80211_pkt_pattern *patterns; struct cfg80211_wowlan_tcp *tcp; int n_patterns; struct cfg80211_sched_scan_request *nd_config; }; /** * struct cfg80211_coalesce_rules - Coalesce rule parameters * * This structure defines coalesce rule for the device. * @delay: maximum coalescing delay in msecs. * @condition: condition for packet coalescence. * see &enum nl80211_coalesce_condition. * @patterns: array of packet patterns * @n_patterns: number of patterns */ struct cfg80211_coalesce_rules { int delay; enum nl80211_coalesce_condition condition; struct cfg80211_pkt_pattern *patterns; int n_patterns; }; /** * struct cfg80211_coalesce - Packet coalescing settings * * This structure defines coalescing settings. * @rules: array of coalesce rules * @n_rules: number of rules */ struct cfg80211_coalesce { struct cfg80211_coalesce_rules *rules; int n_rules; }; /** * struct cfg80211_wowlan_nd_match - information about the match * * @ssid: SSID of the match that triggered the wake up * @n_channels: Number of channels where the match occurred. This * value may be zero if the driver can't report the channels. * @channels: center frequencies of the channels where a match * occurred (in MHz) */ struct cfg80211_wowlan_nd_match { struct cfg80211_ssid ssid; int n_channels; u32 channels[]; }; /** * struct cfg80211_wowlan_nd_info - net detect wake up information * * @n_matches: Number of match information instances provided in * @matches. This value may be zero if the driver can't provide * match information. * @matches: Array of pointers to matches containing information about * the matches that triggered the wake up. */ struct cfg80211_wowlan_nd_info { int n_matches; struct cfg80211_wowlan_nd_match *matches[]; }; /** * struct cfg80211_wowlan_wakeup - wakeup report * @disconnect: woke up by getting disconnected * @magic_pkt: woke up by receiving magic packet * @gtk_rekey_failure: woke up by GTK rekey failure * @eap_identity_req: woke up by EAP identity request packet * @four_way_handshake: woke up by 4-way handshake * @rfkill_release: woke up by rfkill being released * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern * @packet_present_len: copied wakeup packet data * @packet_len: original wakeup packet length * @packet: The packet causing the wakeup, if any. * @packet_80211: For pattern match, magic packet and other data * frame triggers an 802.3 frame should be reported, for * disconnect due to deauth 802.11 frame. This indicates which * it is. * @tcp_match: TCP wakeup packet received * @tcp_connlost: TCP connection lost or failed to establish * @tcp_nomoretokens: TCP data ran out of tokens * @net_detect: if not %NULL, woke up because of net detect */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, rfkill_release, packet_80211, tcp_match, tcp_connlost, tcp_nomoretokens; s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; struct cfg80211_wowlan_nd_info *net_detect; }; /** * struct cfg80211_gtk_rekey_data - rekey data * @kek: key encryption key (@kek_len bytes) * @kck: key confirmation key (@kck_len bytes) * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes) * @kek_len: length of kek * @kck_len length of kck * @akm: akm (oui, id) */ struct cfg80211_gtk_rekey_data { const u8 *kek, *kck, *replay_ctr; u32 akm; u8 kek_len, kck_len; }; /** * struct cfg80211_update_ft_ies_params - FT IE Information * * This structure provides information needed to update the fast transition IE * * @md: The Mobility Domain ID, 2 Octet value * @ie: Fast Transition IEs * @ie_len: Length of ft_ie in octets */ struct cfg80211_update_ft_ies_params { u16 md; const u8 *ie; size_t ie_len; }; /** * struct cfg80211_mgmt_tx_params - mgmt tx parameters * * This structure provides information needed to transmit a mgmt frame * * @chan: channel to use * @offchan: indicates wether off channel operation is required * @wait: duration for ROC * @buf: buffer to transmit * @len: buffer length * @no_cck: don't use cck rates for this frame * @dont_wait_for_ack: tells the low level not to wait for an ack * @n_csa_offsets: length of csa_offsets array * @csa_offsets: array of all the csa offsets in the frame */ struct cfg80211_mgmt_tx_params { struct ieee80211_channel *chan; bool offchan; unsigned int wait; const u8 *buf; size_t len; bool no_cck; bool dont_wait_for_ack; int n_csa_offsets; const u16 *csa_offsets; }; /** * struct cfg80211_dscp_exception - DSCP exception * * @dscp: DSCP value that does not adhere to the user priority range definition * @up: user priority value to which the corresponding DSCP value belongs */ struct cfg80211_dscp_exception { u8 dscp; u8 up; }; /** * struct cfg80211_dscp_range - DSCP range definition for user priority * * @low: lowest DSCP value of this user priority range, inclusive * @high: highest DSCP value of this user priority range, inclusive */ struct cfg80211_dscp_range { u8 low; u8 high; }; /* QoS Map Set element length defined in IEEE Std 802.11-2012, 8.4.2.97 */ #define IEEE80211_QOS_MAP_MAX_EX 21 #define IEEE80211_QOS_MAP_LEN_MIN 16 #define IEEE80211_QOS_MAP_LEN_MAX \ (IEEE80211_QOS_MAP_LEN_MIN + 2 * IEEE80211_QOS_MAP_MAX_EX) /** * struct cfg80211_qos_map - QoS Map Information * * This struct defines the Interworking QoS map setting for DSCP values * * @num_des: number of DSCP exceptions (0..21) * @dscp_exception: optionally up to maximum of 21 DSCP exceptions from * the user priority DSCP range definition * @up: DSCP range definition for a particular user priority */ struct cfg80211_qos_map { u8 num_des; struct cfg80211_dscp_exception dscp_exception[IEEE80211_QOS_MAP_MAX_EX]; struct cfg80211_dscp_range up[8]; }; /** * struct cfg80211_nan_conf - NAN configuration * * This struct defines NAN configuration parameters * * @master_pref: master preference (1 - 255) * @bands: operating bands, a bitmap of &enum nl80211_band values. * For instance, for NL80211_BAND_2GHZ, bit 0 would be set * (i.e. BIT(NL80211_BAND_2GHZ)). */ struct cfg80211_nan_conf { u8 master_pref; u8 bands; }; /** * enum cfg80211_nan_conf_changes - indicates changed fields in NAN * configuration * * @CFG80211_NAN_CONF_CHANGED_PREF: master preference * @CFG80211_NAN_CONF_CHANGED_BANDS: operating bands */ enum cfg80211_nan_conf_changes { CFG80211_NAN_CONF_CHANGED_PREF = BIT(0), CFG80211_NAN_CONF_CHANGED_BANDS = BIT(1), }; /** * struct cfg80211_nan_func_filter - a NAN function Rx / Tx filter * * @filter: the content of the filter * @len: the length of the filter */ struct cfg80211_nan_func_filter { const u8 *filter; u8 len; }; /** * struct cfg80211_nan_func - a NAN function * * @type: &enum nl80211_nan_function_type * @service_id: the service ID of the function * @publish_type: &nl80211_nan_publish_type * @close_range: if true, the range should be limited. Threshold is * implementation specific. * @publish_bcast: if true, the solicited publish should be broadcasted * @subscribe_active: if true, the subscribe is active * @followup_id: the instance ID for follow up * @followup_reqid: the requestor instance ID for follow up * @followup_dest: MAC address of the recipient of the follow up * @ttl: time to live counter in DW. * @serv_spec_info: Service Specific Info * @serv_spec_info_len: Service Specific Info length * @srf_include: if true, SRF is inclusive * @srf_bf: Bloom Filter * @srf_bf_len: Bloom Filter length * @srf_bf_idx: Bloom Filter index * @srf_macs: SRF MAC addresses * @srf_num_macs: number of MAC addresses in SRF * @rx_filters: rx filters that are matched with corresponding peer's tx_filter * @tx_filters: filters that should be transmitted in the SDF. * @num_rx_filters: length of &rx_filters. * @num_tx_filters: length of &tx_filters. * @instance_id: driver allocated id of the function. * @cookie: unique NAN function identifier. */ struct cfg80211_nan_func { enum nl80211_nan_function_type type; u8 service_id[NL80211_NAN_FUNC_SERVICE_ID_LEN]; u8 publish_type; bool close_range; bool publish_bcast; bool subscribe_active; u8 followup_id; u8 followup_reqid; struct mac_address followup_dest; u32 ttl; const u8 *serv_spec_info; u8 serv_spec_info_len; bool srf_include; const u8 *srf_bf; u8 srf_bf_len; u8 srf_bf_idx; struct mac_address *srf_macs; int srf_num_macs; struct cfg80211_nan_func_filter *rx_filters; struct cfg80211_nan_func_filter *tx_filters; u8 num_tx_filters; u8 num_rx_filters; u8 instance_id; u64 cookie; }; /** * struct cfg80211_pmk_conf - PMK configuration * * @aa: authenticator address * @pmk_len: PMK length in bytes. * @pmk: the PMK material * @pmk_r0_name: PMK-R0 Name. NULL if not applicable (i.e., the PMK * is not PMK-R0). When pmk_r0_name is not NULL, the pmk field * holds PMK-R0. */ struct cfg80211_pmk_conf { const u8 *aa; u8 pmk_len; const u8 *pmk; const u8 *pmk_r0_name; }; /** * struct cfg80211_external_auth_params - Trigger External authentication. * * Commonly used across the external auth request and event interfaces. * * @action: action type / trigger for external authentication. Only significant * for the authentication request event interface (driver to user space). * @bssid: BSSID of the peer with which the authentication has * to happen. Used by both the authentication request event and * authentication response command interface. * @ssid: SSID of the AP. Used by both the authentication request event and * authentication response command interface. * @key_mgmt_suite: AKM suite of the respective authentication. Used by the * authentication request event interface. * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication, * use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you * the real status code for failures. Used only for the authentication * response command interface (user space to driver). * @pmkid: The identifier to refer a PMKSA. */ struct cfg80211_external_auth_params { enum nl80211_external_auth_action action; u8 bssid[ETH_ALEN] __aligned(2); struct cfg80211_ssid ssid; unsigned int key_mgmt_suite; u16 status; const u8 *pmkid; }; /** * struct cfg80211_ftm_responder_stats - FTM responder statistics * * @filled: bitflag of flags using the bits of &enum nl80211_ftm_stats to * indicate the relevant values in this struct for them * @success_num: number of FTM sessions in which all frames were successfully * answered * @partial_num: number of FTM sessions in which part of frames were * successfully answered * @failed_num: number of failed FTM sessions * @asap_num: number of ASAP FTM sessions * @non_asap_num: number of non-ASAP FTM sessions * @total_duration_ms: total sessions durations - gives an indication * of how much time the responder was busy * @unknown_triggers_num: number of unknown FTM triggers - triggers from * initiators that didn't finish successfully the negotiation phase with * the responder * @reschedule_requests_num: number of FTM reschedule requests - initiator asks * for a new scheduling although it already has scheduled FTM slot * @out_of_window_triggers_num: total FTM triggers out of scheduled window */ struct cfg80211_ftm_responder_stats { u32 filled; u32 success_num; u32 partial_num; u32 failed_num; u32 asap_num; u32 non_asap_num; u64 total_duration_ms; u32 unknown_triggers_num; u32 reschedule_requests_num; u32 out_of_window_triggers_num; }; /** * struct cfg80211_pmsr_ftm_result - FTM result * @failure_reason: if this measurement failed (PMSR status is * %NL80211_PMSR_STATUS_FAILURE), this gives a more precise * reason than just "failure" * @burst_index: if reporting partial results, this is the index * in [0 .. num_bursts-1] of the burst that's being reported * @num_ftmr_attempts: number of FTM request frames transmitted * @num_ftmr_successes: number of FTM request frames acked * @busy_retry_time: if failure_reason is %NL80211_PMSR_FTM_FAILURE_PEER_BUSY, * fill this to indicate in how many seconds a retry is deemed possible * by the responder * @num_bursts_exp: actual number of bursts exponent negotiated * @burst_duration: actual burst duration negotiated * @ftms_per_burst: actual FTMs per burst negotiated * @lci_len: length of LCI information (if present) * @civicloc_len: length of civic location information (if present) * @lci: LCI data (may be %NULL) * @civicloc: civic location data (may be %NULL) * @rssi_avg: average RSSI over FTM action frames reported * @rssi_spread: spread of the RSSI over FTM action frames reported * @tx_rate: bitrate for transmitted FTM action frame response * @rx_rate: bitrate of received FTM action frame * @rtt_avg: average of RTTs measured (must have either this or @dist_avg) * @rtt_variance: variance of RTTs measured (note that standard deviation is * the square root of the variance) * @rtt_spread: spread of the RTTs measured * @dist_avg: average of distances (mm) measured * (must have either this or @rtt_avg) * @dist_variance: variance of distances measured (see also @rtt_variance) * @dist_spread: spread of distances measured (see also @rtt_spread) * @num_ftmr_attempts_valid: @num_ftmr_attempts is valid * @num_ftmr_successes_valid: @num_ftmr_successes is valid * @rssi_avg_valid: @rssi_avg is valid * @rssi_spread_valid: @rssi_spread is valid * @tx_rate_valid: @tx_rate is valid * @rx_rate_valid: @rx_rate is valid * @rtt_avg_valid: @rtt_avg is valid * @rtt_variance_valid: @rtt_variance is valid * @rtt_spread_valid: @rtt_spread is valid * @dist_avg_valid: @dist_avg is valid * @dist_variance_valid: @dist_variance is valid * @dist_spread_valid: @dist_spread is valid */ struct cfg80211_pmsr_ftm_result { const u8 *lci; const u8 *civicloc; unsigned int lci_len; unsigned int civicloc_len; enum nl80211_peer_measurement_ftm_failure_reasons failure_reason; u32 num_ftmr_attempts, num_ftmr_successes; s16 burst_index; u8 busy_retry_time; u8 num_bursts_exp; u8 burst_duration; u8 ftms_per_burst; s32 rssi_avg; s32 rssi_spread; struct rate_info tx_rate, rx_rate; s64 rtt_avg; s64 rtt_variance; s64 rtt_spread; s64 dist_avg; s64 dist_variance; s64 dist_spread; u16 num_ftmr_attempts_valid:1, num_ftmr_successes_valid:1, rssi_avg_valid:1, rssi_spread_valid:1, tx_rate_valid:1, rx_rate_valid:1, rtt_avg_valid:1, rtt_variance_valid:1, rtt_spread_valid:1, dist_avg_valid:1, dist_variance_valid:1, dist_spread_valid:1; }; /** * struct cfg80211_pmsr_result - peer measurement result * @addr: address of the peer * @host_time: host time (use ktime_get_boottime() adjust to the time when the * measurement was made) * @ap_tsf: AP's TSF at measurement time * @status: status of the measurement * @final: if reporting partial results, mark this as the last one; if not * reporting partial results always set this flag * @ap_tsf_valid: indicates the @ap_tsf value is valid * @type: type of the measurement reported, note that we only support reporting * one type at a time, but you can report multiple results separately and * they're all aggregated for userspace. */ struct cfg80211_pmsr_result { u64 host_time, ap_tsf; enum nl80211_peer_measurement_status status; u8 addr[ETH_ALEN]; u8 final:1, ap_tsf_valid:1; enum nl80211_peer_measurement_type type; union { struct cfg80211_pmsr_ftm_result ftm; }; }; /** * struct cfg80211_pmsr_ftm_request_peer - FTM request data * @requested: indicates FTM is requested * @preamble: frame preamble to use * @burst_period: burst period to use * @asap: indicates to use ASAP mode * @num_bursts_exp: number of bursts exponent * @burst_duration: burst duration * @ftms_per_burst: number of FTMs per burst * @ftmr_retries: number of retries for FTM request * @request_lci: request LCI information * @request_civicloc: request civic location information * @trigger_based: use trigger based ranging for the measurement * If neither @trigger_based nor @non_trigger_based is set, * EDCA based ranging will be used. * @non_trigger_based: use non trigger based ranging for the measurement * If neither @trigger_based nor @non_trigger_based is set, * EDCA based ranging will be used. * * See also nl80211 for the respective attribute documentation. */ struct cfg80211_pmsr_ftm_request_peer { enum nl80211_preamble preamble; u16 burst_period; u8 requested:1, asap:1, request_lci:1, request_civicloc:1, trigger_based:1, non_trigger_based:1; u8 num_bursts_exp; u8 burst_duration; u8 ftms_per_burst; u8 ftmr_retries; }; /** * struct cfg80211_pmsr_request_peer - peer data for a peer measurement request * @addr: MAC address * @chandef: channel to use * @report_ap_tsf: report the associated AP's TSF * @ftm: FTM data, see &struct cfg80211_pmsr_ftm_request_peer */ struct cfg80211_pmsr_request_peer { u8 addr[ETH_ALEN]; struct cfg80211_chan_def chandef; u8 report_ap_tsf:1; struct cfg80211_pmsr_ftm_request_peer ftm; }; /** * struct cfg80211_pmsr_request - peer measurement request * @cookie: cookie, set by cfg80211 * @nl_portid: netlink portid - used by cfg80211 * @drv_data: driver data for this request, if required for aborting, * not otherwise freed or anything by cfg80211 * @mac_addr: MAC address used for (randomised) request * @mac_addr_mask: MAC address mask used for randomisation, bits that * are 0 in the mask should be randomised, bits that are 1 should * be taken from the @mac_addr * @list: used by cfg80211 to hold on to the request * @timeout: timeout (in milliseconds) for the whole operation, if * zero it means there's no timeout * @n_peers: number of peers to do measurements with * @peers: per-peer measurement request data */ struct cfg80211_pmsr_request { u64 cookie; void *drv_data; u32 n_peers; u32 nl_portid; u32 timeout; u8 mac_addr[ETH_ALEN] __aligned(2); u8 mac_addr_mask[ETH_ALEN] __aligned(2); struct list_head list; struct cfg80211_pmsr_request_peer peers[]; }; /** * struct cfg80211_update_owe_info - OWE Information * * This structure provides information needed for the drivers to offload OWE * (Opportunistic Wireless Encryption) processing to the user space. * * Commonly used across update_owe_info request and event interfaces. * * @peer: MAC address of the peer device for which the OWE processing * has to be done. * @status: status code, %WLAN_STATUS_SUCCESS for successful OWE info * processing, use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space * cannot give you the real status code for failures. Used only for * OWE update request command interface (user space to driver). * @ie: IEs obtained from the peer or constructed by the user space. These are * the IEs of the remote peer in the event from the host driver and * the constructed IEs by the user space in the request interface. * @ie_len: Length of IEs in octets. */ struct cfg80211_update_owe_info { u8 peer[ETH_ALEN] __aligned(2); u16 status; const u8 *ie; size_t ie_len; }; /** * struct mgmt_frame_regs - management frame registrations data * @global_stypes: bitmap of management frame subtypes registered * for the entire device * @interface_stypes: bitmap of management frame subtypes registered * for the given interface * @global_mcast_rx: mcast RX is needed globally for these subtypes * @interface_mcast_stypes: mcast RX is needed on this interface * for these subtypes */ struct mgmt_frame_regs { u32 global_stypes, interface_stypes; u32 global_mcast_stypes, interface_mcast_stypes; }; /** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks * in order to handle configuration requests on their interfaces. * * All callbacks except where otherwise noted should return 0 * on success or a negative error code. * * All operations are currently invoked under rtnl for consistency with the * wireless extensions but this is subject to reevaluation as soon as this * code is used more widely and we have a first user without wext. * * @suspend: wiphy device needs to be suspended. The variable @wow will * be %NULL or contain the enabled Wake-on-Wireless triggers that are * configured for the device. * @resume: wiphy device needs to be resumed * @set_wakeup: Called when WoWLAN is enabled/disabled, use this callback * to call device_set_wakeup_enable() to enable/disable wakeup from * the device. * * @add_virtual_intf: create a new virtual interface with the given name, * must set the struct wireless_dev's iftype. Beware: You must create * the new netdev in the wiphy's network namespace! Returns the struct * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must * also set the address member in the wdev. * * @del_virtual_intf: remove the virtual interface * * @change_virtual_intf: change type/configuration of virtual interface, * keep the struct wireless_dev's iftype updated. * * @add_key: add a key with the given parameters. @mac_addr will be %NULL * when adding a group key. * * @get_key: get information about the key with the given parameters. * @mac_addr will be %NULL when requesting information for a group * key. All pointers given to the @callback function need not be valid * after it returns. This function should return an error if it is * not possible to retrieve the key, -ENOENT if it doesn't exist. * * @del_key: remove a key given the @mac_addr (%NULL for a group key) * and @key_index, return -ENOENT if the key doesn't exist. * * @set_default_key: set the default key on an interface * * @set_default_mgmt_key: set the default management frame key on an interface * * @set_default_beacon_key: set the default Beacon frame key on an interface * * @set_rekey_data: give the data necessary for GTK rekeying to the driver * * @start_ap: Start acting in AP mode defined by the parameters. * @change_beacon: Change the beacon parameters for an access point mode * interface. This should reject the call when AP mode wasn't started. * @stop_ap: Stop being an AP, including stopping beaconing. * * @add_station: Add a new station. * @del_station: Remove a station * @change_station: Modify a given station. Note that flags changes are not much * validated in cfg80211, in particular the auth/assoc/authorized flags * might come to the driver in invalid combinations -- make sure to check * them, also against the existing state! Drivers must call * cfg80211_check_station_change() to validate the information. * @get_station: get station information for the station identified by @mac * @dump_station: dump station callback -- resume dump at index @idx * * @add_mpath: add a fixed mesh path * @del_mpath: delete a given mesh path * @change_mpath: change a given mesh path * @get_mpath: get a mesh path for the given parameters * @dump_mpath: dump mesh path callback -- resume dump at index @idx * @get_mpp: get a mesh proxy path for the given parameters * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx * @join_mesh: join the mesh network with the specified parameters * (invoked with the wireless_dev mutex held) * @leave_mesh: leave the current mesh network * (invoked with the wireless_dev mutex held) * * @get_mesh_config: Get the current mesh configuration * * @update_mesh_config: Update mesh parameters on a running mesh. * The mask is a bitfield which tells us which parameters to * set, and which to leave alone. * * @change_bss: Modify parameters for a given BSS. * * @set_txq_params: Set TX queue parameters * * @libertas_set_mesh_channel: Only for backward compatibility for libertas, * as it doesn't implement join_mesh and needs to set the channel to * join the mesh instead. * * @set_monitor_channel: Set the monitor mode channel for the device. If other * interfaces are active this callback should reject the configuration. * If no interfaces are active or the device is down, the channel should * be stored for when a monitor interface becomes active. * * @scan: Request to do a scan. If returning zero, the scan request is given * the driver, and will be valid until passed to cfg80211_scan_done(). * For scan results, call cfg80211_inform_bss(); you can call this outside * the scan/scan_done bracket too. * @abort_scan: Tell the driver to abort an ongoing scan. The driver shall * indicate the status of the scan through cfg80211_scan_done(). * * @auth: Request to authenticate with the specified peer * (invoked with the wireless_dev mutex held) * @assoc: Request to (re)associate with the specified peer * (invoked with the wireless_dev mutex held) * @deauth: Request to deauthenticate from the specified peer * (invoked with the wireless_dev mutex held) * @disassoc: Request to disassociate from the specified peer * (invoked with the wireless_dev mutex held) * * @connect: Connect to the ESS with the specified parameters. When connected, * call cfg80211_connect_result()/cfg80211_connect_bss() with status code * %WLAN_STATUS_SUCCESS. If the connection fails for some reason, call * cfg80211_connect_result()/cfg80211_connect_bss() with the status code * from the AP or cfg80211_connect_timeout() if no frame with status code * was received. * The driver is allowed to roam to other BSSes within the ESS when the * other BSS matches the connect parameters. When such roaming is initiated * by the driver, the driver is expected to verify that the target matches * the configured security parameters and to use Reassociation Request * frame instead of Association Request frame. * The connect function can also be used to request the driver to perform a * specific roam when connected to an ESS. In that case, the prev_bssid * parameter is set to the BSSID of the currently associated BSS as an * indication of requesting reassociation. * In both the driver-initiated and new connect() call initiated roaming * cases, the result of roaming is indicated with a call to * cfg80211_roamed(). (invoked with the wireless_dev mutex held) * @update_connect_params: Update the connect parameters while connected to a * BSS. The updated parameters can be used by driver/firmware for * subsequent BSS selection (roaming) decisions and to form the * Authentication/(Re)Association Request frames. This call does not * request an immediate disassociation or reassociation with the current * BSS, i.e., this impacts only subsequent (re)associations. The bits in * changed are defined in &enum cfg80211_connect_params_changed. * (invoked with the wireless_dev mutex held) * @disconnect: Disconnect from the BSS/ESS or stop connection attempts if * connection is in progress. Once done, call cfg80211_disconnected() in * case connection was already established (invoked with the * wireless_dev mutex held), otherwise call cfg80211_connect_timeout(). * * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call * cfg80211_ibss_joined(), also call that function when changing BSSID due * to a merge. * (invoked with the wireless_dev mutex held) * @leave_ibss: Leave the IBSS. * (invoked with the wireless_dev mutex held) * * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or * MESH mode) * * @set_wiphy_params: Notify that wiphy parameters have changed; * @changed bitfield (see &enum wiphy_params_flags) describes which values * have changed. The actual parameter values are available in * struct wiphy. If returning an error, no value should be changed. * * @set_tx_power: set the transmit power according to the parameters, * the power passed is in mBm, to get dBm use MBM_TO_DBM(). The * wdev may be %NULL if power was set for the wiphy, and will * always be %NULL unless the driver supports per-vif TX power * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful * * @set_wds_peer: set the WDS peer for a WDS interface * * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting * functions to adjust rfkill hw state * * @dump_survey: get site survey information. * * @remain_on_channel: Request the driver to remain awake on the specified * channel for the specified duration to complete an off-channel * operation (e.g., public action frame exchange). When the driver is * ready on the requested channel, it must indicate this with an event * notification by calling cfg80211_ready_on_channel(). * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. * This allows the operation to be terminated prior to timeout based on * the duration value. * @mgmt_tx: Transmit a management frame. * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management * frame on another channel * * @testmode_cmd: run a test mode command; @wdev may be %NULL * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be * used by the function, but 0 and 1 must not be touched. Additionally, * return error codes other than -ENOBUFS and -ENOENT will terminate the * dump and return to userspace with an error, so be careful. If any data * was passed in from userspace then the data/len arguments will be present * and point to the data contained in %NL80211_ATTR_TESTDATA. * * @set_bitrate_mask: set the bitrate mask configuration * * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac * devices running firmwares capable of generating the (re) association * RSN IE. It allows for faster roaming between WPA2 BSSIDs. * @del_pmksa: Delete a cached PMKID. * @flush_pmksa: Flush all cached PMKIDs. * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 * allows the driver to adjust the dynamic ps timeout value. * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. * After configuration, the driver should (soon) send an event indicating * the current level is above/below the configured threshold; this may * need some care when the configuration is changed (without first being * disabled.) * @set_cqm_rssi_range_config: Configure two RSSI thresholds in the * connection quality monitor. An event is to be sent only when the * signal level is found to be outside the two values. The driver should * set %NL80211_EXT_FEATURE_CQM_RSSI_LIST if this method is implemented. * If it is provided then there's no point providing @set_cqm_rssi_config. * @set_cqm_txe_config: Configure connection quality monitor TX error * thresholds. * @sched_scan_start: Tell the driver to start a scheduled scan. * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan with * given request id. This call must stop the scheduled scan and be ready * for starting a new one before it returns, i.e. @sched_scan_start may be * called immediately after that again and should not fail in that case. * The driver should not call cfg80211_sched_scan_stopped() for a requested * stop (when this method returns 0). * * @update_mgmt_frame_registrations: Notify the driver that management frame * registrations were updated. The callback is allowed to sleep. * * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may * reject TX/RX mask combinations they cannot support by returning -EINVAL * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). * * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). * * @tdls_mgmt: Transmit a TDLS management frame. * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). * * @probe_client: probe an associated client, must return a cookie that it * later passes to cfg80211_probe_status(). * * @set_noack_map: Set the NoAck Map for the TIDs. * * @get_channel: Get the current operating channel for the virtual interface. * For monitor interfaces, it should return %NULL unless there's a single * current monitoring channel. * * @start_p2p_device: Start the given P2P device. * @stop_p2p_device: Stop the given P2P device. * * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode. * Parameters include ACL policy, an array of MAC address of stations * and the number of MAC addresses. If there is already a list in driver * this new list replaces the existing one. Driver has to clear its ACL * when number of MAC addresses entries is passed as 0. Drivers which * advertise the support for MAC based ACL have to implement this callback. * * @start_radar_detection: Start radar detection in the driver. * * @end_cac: End running CAC, probably because a related CAC * was finished on another phy. * * @update_ft_ies: Provide updated Fast BSS Transition information to the * driver. If the SME is in the driver/firmware, this information can be * used in building Authentication and Reassociation Request frames. * * @crit_proto_start: Indicates a critical protocol needs more link reliability * for a given duration (milliseconds). The protocol is provided so the * driver can take the most appropriate actions. * @crit_proto_stop: Indicates critical protocol no longer needs increased link * reliability. This operation can not fail. * @set_coalesce: Set coalesce parameters. * * @channel_switch: initiate channel-switch procedure (with CSA). Driver is * responsible for veryfing if the switch is possible. Since this is * inherently tricky driver may decide to disconnect an interface later * with cfg80211_stop_iface(). This doesn't mean driver can accept * everything. It should do it's best to verify requests and reject them * as soon as possible. * * @set_qos_map: Set QoS mapping information to the driver * * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the * given interface This is used e.g. for dynamic HT 20/40 MHz channel width * changes during the lifetime of the BSS. * * @add_tx_ts: validate (if admitted_time is 0) or add a TX TS to the device * with the given parameters; action frame exchange has been handled by * userspace so this just has to modify the TX path to take the TS into * account. * If the admitted time is 0 just validate the parameters to make sure * the session can be created at all; it is valid to just always return * success for that but that may result in inefficient behaviour (handshake * with the peer followed by immediate teardown when the addition is later * rejected) * @del_tx_ts: remove an existing TX TS * * @join_ocb: join the OCB network with the specified parameters * (invoked with the wireless_dev mutex held) * @leave_ocb: leave the current OCB network * (invoked with the wireless_dev mutex held) * * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver * is responsible for continually initiating channel-switching operations * and returning to the base channel for communication with the AP. * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both * peers must be on the base channel when the call completes. * @start_nan: Start the NAN interface. * @stop_nan: Stop the NAN interface. * @add_nan_func: Add a NAN function. Returns negative value on failure. * On success @nan_func ownership is transferred to the driver and * it may access it outside of the scope of this function. The driver * should free the @nan_func when no longer needed by calling * cfg80211_free_nan_func(). * On success the driver should assign an instance_id in the * provided @nan_func. * @del_nan_func: Delete a NAN function. * @nan_change_conf: changes NAN configuration. The changed parameters must * be specified in @changes (using &enum cfg80211_nan_conf_changes); * All other parameters must be ignored. * * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS * * @get_txq_stats: Get TXQ stats for interface or phy. If wdev is %NULL, this * function should return phy stats, and interface stats otherwise. * * @set_pmk: configure the PMK to be used for offloaded 802.1X 4-Way handshake. * If not deleted through @del_pmk the PMK remains valid until disconnect * upon which the driver should clear it. * (invoked with the wireless_dev mutex held) * @del_pmk: delete the previously configured PMK for the given authenticator. * (invoked with the wireless_dev mutex held) * * @external_auth: indicates result of offloaded authentication processing from * user space * * @tx_control_port: TX a control port frame (EAPoL). The noencrypt parameter * tells the driver that the frame should not be encrypted. * * @get_ftm_responder_stats: Retrieve FTM responder statistics, if available. * Statistics should be cumulative, currently no way to reset is provided. * @start_pmsr: start peer measurement (e.g. FTM) * @abort_pmsr: abort peer measurement * * @update_owe_info: Provide updated OWE info to driver. Driver implementing SME * but offloading OWE processing to the user space will get the updated * DH IE through this interface. * * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame * and overrule HWMP path selection algorithm. * @set_tid_config: TID specific configuration, this can be peer or BSS specific * This callback may sleep. * @reset_tid_config: Reset TID specific configuration for the peer, for the * given TIDs. This callback may sleep. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); int (*resume)(struct wiphy *wiphy); void (*set_wakeup)(struct wiphy *wiphy, bool enabled); struct wireless_dev * (*add_virtual_intf)(struct wiphy *wiphy, const char *name, unsigned char name_assign_type, enum nl80211_iftype type, struct vif_params *params); int (*del_virtual_intf)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*change_virtual_intf)(struct wiphy *wiphy, struct net_device *dev, enum nl80211_iftype type, struct vif_params *params); int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr, struct key_params *params); int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr, void *cookie, void (*callback)(void *cookie, struct key_params*)); int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr); int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool unicast, bool multicast); int (*set_default_mgmt_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); int (*set_default_beacon_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ap_settings *settings); int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_beacon_data *info); int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev); int (*add_station)(struct wiphy *wiphy, struct net_device *dev, const u8 *mac, struct station_parameters *params); int (*del_station)(struct wiphy *wiphy, struct net_device *dev, struct station_del_parameters *params); int (*change_station)(struct wiphy *wiphy, struct net_device *dev, const u8 *mac, struct station_parameters *params); int (*get_station)(struct wiphy *wiphy, struct net_device *dev, const u8 *mac, struct station_info *sinfo); int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *mac, struct station_info *sinfo); int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, const u8 *dst, const u8 *next_hop); int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, const u8 *dst); int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, const u8 *dst, const u8 *next_hop); int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop, struct mpath_info *pinfo); int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo); int (*get_mpp)(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *mpp, struct mpath_info *pinfo); int (*dump_mpp)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *mpp, struct mpath_info *pinfo); int (*get_mesh_config)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); int (*update_mesh_config)(struct wiphy *wiphy, struct net_device *dev, u32 mask, const struct mesh_config *nconf); int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, const struct mesh_config *conf, const struct mesh_setup *setup); int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev, struct ocb_setup *setup); int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev); int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, struct bss_parameters *params); int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_txq_params *params); int (*libertas_set_mesh_channel)(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_channel *chan); int (*set_monitor_channel)(struct wiphy *wiphy, struct cfg80211_chan_def *chandef); int (*scan)(struct wiphy *wiphy, struct cfg80211_scan_request *request); void (*abort_scan)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*auth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_auth_request *req); int (*assoc)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_assoc_request *req); int (*deauth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_deauth_request *req); int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_disassoc_request *req); int (*connect)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme); int (*update_connect_params)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme, u32 changed); int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, u16 reason_code); int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ibss_params *params); int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, int rate[NUM_NL80211_BANDS]); int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, int mbm); int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, int *dbm); int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); void (*rfkill_poll)(struct wiphy *wiphy); #ifdef CONFIG_NL80211_TESTMODE int (*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev, void *data, int len); int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, struct netlink_callback *cb, void *data, int len); #endif int (*set_bitrate_mask)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, const struct cfg80211_bitrate_mask *mask); int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, int idx, struct survey_info *info); int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev, struct cfg80211_pmksa *pmksa); int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev, struct cfg80211_pmksa *pmksa); int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev); int (*remain_on_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, unsigned int duration, u64 *cookie); int (*cancel_remain_on_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, u64 cookie); int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_mgmt_tx_params *params, u64 *cookie); int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, struct wireless_dev *wdev, u64 cookie); int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, bool enabled, int timeout); int (*set_cqm_rssi_config)(struct wiphy *wiphy, struct net_device *dev, s32 rssi_thold, u32 rssi_hyst); int (*set_cqm_rssi_range_config)(struct wiphy *wiphy, struct net_device *dev, s32 rssi_low, s32 rssi_high); int (*set_cqm_txe_config)(struct wiphy *wiphy, struct net_device *dev, u32 rate, u32 pkts, u32 intvl); void (*update_mgmt_frame_registrations)(struct wiphy *wiphy, struct wireless_dev *wdev, struct mgmt_frame_regs *upd); int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); int (*sched_scan_start)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_sched_scan_request *request); int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev, u64 reqid); int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_gtk_rekey_data *data); int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u8 action_code, u8 dialog_token, u16 status_code, u32 peer_capability, bool initiator, const u8 *buf, size_t len); int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper); int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u64 *cookie); int (*set_noack_map)(struct wiphy *wiphy, struct net_device *dev, u16 noack_map); int (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_chan_def *chandef); int (*start_p2p_device)(struct wiphy *wiphy, struct wireless_dev *wdev); void (*stop_p2p_device)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_acl_data *params); int (*start_radar_detection)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_chan_def *chandef, u32 cac_time_ms); void (*end_cac)(struct wiphy *wiphy, struct net_device *dev); int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_update_ft_ies_params *ftie); int (*crit_proto_start)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_crit_proto_id protocol, u16 duration); void (*crit_proto_stop)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*set_coalesce)(struct wiphy *wiphy, struct cfg80211_coalesce *coalesce); int (*channel_switch)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_csa_settings *params); int (*set_qos_map)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_qos_map *qos_map); int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_chan_def *chandef); int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev, u8 tsid, const u8 *peer, u8 user_prio, u16 admitted_time); int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, u8 tsid, const u8 *peer); int (*tdls_channel_switch)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr, u8 oper_class, struct cfg80211_chan_def *chandef); void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); int (*start_nan)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_nan_conf *conf); void (*stop_nan)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*add_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_nan_func *nan_func); void (*del_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev, u64 cookie); int (*nan_change_conf)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_nan_conf *conf, u32 changes); int (*set_multicast_to_unicast)(struct wiphy *wiphy, struct net_device *dev, const bool enabled); int (*get_txq_stats)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_txq_stats *txqstats); int (*set_pmk)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_pmk_conf *conf); int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev, const u8 *aa); int (*external_auth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_external_auth_params *params); int (*tx_control_port)(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len, const u8 *dest, const __be16 proto, const bool noencrypt, u64 *cookie); int (*get_ftm_responder_stats)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ftm_responder_stats *ftm_stats); int (*start_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_pmsr_request *request); void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_pmsr_request *request); int (*update_owe_info)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_update_owe_info *owe_info); int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len); int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_tid_config *tid_conf); int (*reset_tid_config)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u8 tids); }; /* * wireless hardware and networking interfaces structures * and registration/helper functions */ /** * enum wiphy_flags - wiphy capability flags * * @WIPHY_FLAG_SPLIT_SCAN_6GHZ: if set to true, the scan request will be split * into two, first for legacy bands and second for UHB. * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this * wiphy at all * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled * by default -- this flag will be set depending on the kernel's default * on wiphy_new(), but can be changed by the driver if it has a good * reason to override the default * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station * on a VLAN interface). This flag also serves an extra purpose of * supporting 4ADDR AP mode on devices which do not support AP/VLAN iftype. * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the * control port protocol ethertype. The device also honours the * control_port_no_encrypt flag. * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the * firmware. * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) * link setup/discovery operations internally. Setup, discovery and * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be * used for asking the driver/firmware to perform a TDLS operation. * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes * when there are virtual interfaces in AP mode by calling * cfg80211_report_obss_beacon(). * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device * responds to probe-requests in hardware. * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation * before connection. * @WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK: The device supports bigger kek and kck keys */ enum wiphy_flags { WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK = BIT(0), /* use hole at 1 */ WIPHY_FLAG_SPLIT_SCAN_6GHZ = BIT(2), WIPHY_FLAG_NETNS_OK = BIT(3), WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), WIPHY_FLAG_4ADDR_AP = BIT(5), WIPHY_FLAG_4ADDR_STATION = BIT(6), WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), WIPHY_FLAG_IBSS_RSN = BIT(8), WIPHY_FLAG_MESH_AUTH = BIT(10), /* use hole at 11 */ /* use hole at 12 */ WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), WIPHY_FLAG_HAVE_AP_SME = BIT(17), WIPHY_FLAG_REPORTS_OBSS = BIT(18), WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), WIPHY_FLAG_OFFCHAN_TX = BIT(20), WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23), WIPHY_FLAG_HAS_STATIC_WEP = BIT(24), }; /** * struct ieee80211_iface_limit - limit on certain interface types * @max: maximum number of interfaces of these types * @types: interface types (bits) */ struct ieee80211_iface_limit { u16 max; u16 types; }; /** * struct ieee80211_iface_combination - possible interface combination * * With this structure the driver can describe which interface * combinations it supports concurrently. * * Examples: * * 1. Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: * * .. code-block:: c * * struct ieee80211_iface_limit limits1[] = { * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, }, * }; * struct ieee80211_iface_combination combination1 = { * .limits = limits1, * .n_limits = ARRAY_SIZE(limits1), * .max_interfaces = 2, * .beacon_int_infra_match = true, * }; * * * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: * * .. code-block:: c * * struct ieee80211_iface_limit limits2[] = { * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) | * BIT(NL80211_IFTYPE_P2P_GO), }, * }; * struct ieee80211_iface_combination combination2 = { * .limits = limits2, * .n_limits = ARRAY_SIZE(limits2), * .max_interfaces = 8, * .num_different_channels = 1, * }; * * * 3. Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. * * This allows for an infrastructure connection and three P2P connections. * * .. code-block:: c * * struct ieee80211_iface_limit limits3[] = { * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) | * BIT(NL80211_IFTYPE_P2P_CLIENT), }, * }; * struct ieee80211_iface_combination combination3 = { * .limits = limits3, * .n_limits = ARRAY_SIZE(limits3), * .max_interfaces = 4, * .num_different_channels = 2, * }; * */ struct ieee80211_iface_combination { /** * @limits: * limits for the given interface types */ const struct ieee80211_iface_limit *limits; /** * @num_different_channels: * can use up to this many different channels */ u32 num_different_channels; /** * @max_interfaces: * maximum number of interfaces in total allowed in this group */ u16 max_interfaces; /** * @n_limits: * number of limitations */ u8 n_limits; /** * @beacon_int_infra_match: * In this combination, the beacon intervals between infrastructure * and AP types must match. This is required only in special cases. */ bool beacon_int_infra_match; /** * @radar_detect_widths: * bitmap of channel widths supported for radar detection */ u8 radar_detect_widths; /** * @radar_detect_regions: * bitmap of regions supported for radar detection */ u8 radar_detect_regions; /** * @beacon_int_min_gcd: * This interface combination supports different beacon intervals. * * = 0 * all beacon intervals for different interface must be same. * > 0 * any beacon interval for the interface part of this combination AND * GCD of all beacon intervals from beaconing interfaces of this * combination must be greater or equal to this value. */ u32 beacon_int_min_gcd; }; struct ieee80211_txrx_stypes { u16 tx, rx; }; /** * enum wiphy_wowlan_support_flags - WoWLAN support flags * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any" * trigger that keeps the device operating as-is and * wakes up the host on any activity, for example a * received packet that passed filtering; note that the * packet should be preserved in that case * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet * (see nl80211.h) * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release * @WIPHY_WOWLAN_NET_DETECT: supports wakeup on network detection */ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_ANY = BIT(0), WIPHY_WOWLAN_MAGIC_PKT = BIT(1), WIPHY_WOWLAN_DISCONNECT = BIT(2), WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3), WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4), WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), WIPHY_WOWLAN_NET_DETECT = BIT(8), }; struct wiphy_wowlan_tcp_support { const struct nl80211_wowlan_tcp_data_token_feature *tok; u32 data_payload_max; u32 data_interval_max; u32 wake_payload_max; bool seq; }; /** * struct wiphy_wowlan_support - WoWLAN support data * @flags: see &enum wiphy_wowlan_support_flags * @n_patterns: number of supported wakeup patterns * (see nl80211.h for the pattern definition) * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset * @max_nd_match_sets: maximum number of matchsets for net-detect, * similar, but not necessarily identical, to max_match_sets for * scheduled scans. * See &struct cfg80211_sched_scan_request.@match_sets for more * details. * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { u32 flags; int n_patterns; int pattern_max_len; int pattern_min_len; int max_pkt_offset; int max_nd_match_sets; const struct wiphy_wowlan_tcp_support *tcp; }; /** * struct wiphy_coalesce_support - coalesce support data * @n_rules: maximum number of coalesce rules * @max_delay: maximum supported coalescing delay in msecs * @n_patterns: number of supported patterns in a rule * (see nl80211.h for the pattern definition) * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset */ struct wiphy_coalesce_support { int n_rules; int max_delay; int n_patterns; int pattern_max_len; int pattern_min_len; int max_pkt_offset; }; /** * enum wiphy_vendor_command_flags - validation flags for vendor commands * @WIPHY_VENDOR_CMD_NEED_WDEV: vendor command requires wdev * @WIPHY_VENDOR_CMD_NEED_NETDEV: vendor command requires netdev * @WIPHY_VENDOR_CMD_NEED_RUNNING: interface/wdev must be up & running * (must be combined with %_WDEV or %_NETDEV) */ enum wiphy_vendor_command_flags { WIPHY_VENDOR_CMD_NEED_WDEV = BIT(0), WIPHY_VENDOR_CMD_NEED_NETDEV = BIT(1), WIPHY_VENDOR_CMD_NEED_RUNNING = BIT(2), }; /** * enum wiphy_opmode_flag - Station's ht/vht operation mode information flags * * @STA_OPMODE_MAX_BW_CHANGED: Max Bandwidth changed * @STA_OPMODE_SMPS_MODE_CHANGED: SMPS mode changed * @STA_OPMODE_N_SS_CHANGED: max N_SS (number of spatial streams) changed * */ enum wiphy_opmode_flag { STA_OPMODE_MAX_BW_CHANGED = BIT(0), STA_OPMODE_SMPS_MODE_CHANGED = BIT(1), STA_OPMODE_N_SS_CHANGED = BIT(2), }; /** * struct sta_opmode_info - Station's ht/vht operation mode information * @changed: contains value from &enum wiphy_opmode_flag * @smps_mode: New SMPS mode value from &enum nl80211_smps_mode of a station * @bw: new max bandwidth value from &enum nl80211_chan_width of a station * @rx_nss: new rx_nss value of a station */ struct sta_opmode_info { u32 changed; enum nl80211_smps_mode smps_mode; enum nl80211_chan_width bw; u8 rx_nss; }; #define VENDOR_CMD_RAW_DATA ((const struct nla_policy *)(long)(-ENODATA)) /** * struct wiphy_vendor_command - vendor command definition * @info: vendor command identifying information, as used in nl80211 * @flags: flags, see &enum wiphy_vendor_command_flags * @doit: callback for the operation, note that wdev is %NULL if the * flags didn't ask for a wdev and non-%NULL otherwise; the data * pointer may be %NULL if userspace provided no data at all * @dumpit: dump callback, for transferring bigger/multiple items. The * @storage points to cb->args[5], ie. is preserved over the multiple * dumpit calls. * @policy: policy pointer for attributes within %NL80211_ATTR_VENDOR_DATA. * Set this to %VENDOR_CMD_RAW_DATA if no policy can be given and the * attribute is just raw data (e.g. a firmware command). * @maxattr: highest attribute number in policy * It's recommended to not have the same sub command with both @doit and * @dumpit, so that userspace can assume certain ones are get and others * are used with dump requests. */ struct wiphy_vendor_command { struct nl80211_vendor_cmd_info info; u32 flags; int (*doit)(struct wiphy *wiphy, struct wireless_dev *wdev, const void *data, int data_len); int (*dumpit)(struct wiphy *wiphy, struct wireless_dev *wdev, struct sk_buff *skb, const void *data, int data_len, unsigned long *storage); const struct nla_policy *policy; unsigned int maxattr; }; /** * struct wiphy_iftype_ext_capab - extended capabilities per interface type * @iftype: interface type * @extended_capabilities: extended capabilities supported by the driver, * additional capabilities might be supported by userspace; these are the * 802.11 extended capabilities ("Extended Capabilities element") and are * in the same format as in the information element. See IEEE Std * 802.11-2012 8.4.2.29 for the defined fields. * @extended_capabilities_mask: mask of the valid values * @extended_capabilities_len: length of the extended capabilities */ struct wiphy_iftype_ext_capab { enum nl80211_iftype iftype; const u8 *extended_capabilities; const u8 *extended_capabilities_mask; u8 extended_capabilities_len; }; /** * struct cfg80211_pmsr_capabilities - cfg80211 peer measurement capabilities * @max_peers: maximum number of peers in a single measurement * @report_ap_tsf: can report assoc AP's TSF for radio resource measurement * @randomize_mac_addr: can randomize MAC address for measurement * @ftm.supported: FTM measurement is supported * @ftm.asap: ASAP-mode is supported * @ftm.non_asap: non-ASAP-mode is supported * @ftm.request_lci: can request LCI data * @ftm.request_civicloc: can request civic location data * @ftm.preambles: bitmap of preambles supported (&enum nl80211_preamble) * @ftm.bandwidths: bitmap of bandwidths supported (&enum nl80211_chan_width) * @ftm.max_bursts_exponent: maximum burst exponent supported * (set to -1 if not limited; note that setting this will necessarily * forbid using the value 15 to let the responder pick) * @ftm.max_ftms_per_burst: maximum FTMs per burst supported (set to 0 if * not limited) * @ftm.trigger_based: trigger based ranging measurement is supported * @ftm.non_trigger_based: non trigger based ranging measurement is supported */ struct cfg80211_pmsr_capabilities { unsigned int max_peers; u8 report_ap_tsf:1, randomize_mac_addr:1; struct { u32 preambles; u32 bandwidths; s8 max_bursts_exponent; u8 max_ftms_per_burst; u8 supported:1, asap:1, non_asap:1, request_lci:1, request_civicloc:1, trigger_based:1, non_trigger_based:1; } ftm; }; /** * struct wiphy_iftype_akm_suites - This structure encapsulates supported akm * suites for interface types defined in @iftypes_mask. Each type in the * @iftypes_mask must be unique across all instances of iftype_akm_suites. * * @iftypes_mask: bitmask of interfaces types * @akm_suites: points to an array of supported akm suites * @n_akm_suites: number of supported AKM suites */ struct wiphy_iftype_akm_suites { u16 iftypes_mask; const u32 *akm_suites; int n_akm_suites; }; /** * struct wiphy - wireless hardware description * @reg_notifier: the driver's regulatory notification callback, * note that if your driver uses wiphy_apply_custom_regulatory() * the reg_notifier's request can be passed as NULL * @regd: the driver's regulatory domain, if one was requested via * the regulatory_hint() API. This can be used by the driver * on the reg_notifier() if it chooses to ignore future * regulatory domain changes caused by other drivers. * @signal_type: signal type reported in &struct cfg80211_bss. * @cipher_suites: supported cipher suites * @n_cipher_suites: number of supported cipher suites * @akm_suites: supported AKM suites. These are the default AKMs supported if * the supported AKMs not advertized for a specific interface type in * iftype_akm_suites. * @n_akm_suites: number of supported AKM suites * @iftype_akm_suites: array of supported akm suites info per interface type. * Note that the bits in @iftypes_mask inside this structure cannot * overlap (i.e. only one occurrence of each type is allowed across all * instances of iftype_akm_suites). * @num_iftype_akm_suites: number of interface types for which supported akm * suites are specified separately. * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) * @retry_long: Retry limit for long frames (dot11LongRetryLimit) * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); * -1 = fragmentation disabled, only odd values >= 256 used * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled * @_net: the network namespace this wiphy currently lives in * @perm_addr: permanent MAC address of this device * @addr_mask: If the device supports multiple MAC addresses by masking, * set this to a mask with variable bits set to 1, e.g. if the last * four bits are variable then set it to 00-00-00-00-00-0f. The actual * variable bits shall be determined by the interfaces added, with * interfaces not matching the mask being rejected to be brought up. * @n_addresses: number of addresses in @addresses. * @addresses: If the device has more than one address, set this pointer * to a list of addresses (6 bytes each). The first one will be used * by default for perm_addr. In this case, the mask should be set to * all-zeroes. In this case it is assumed that the device can handle * the same number of arbitrary MAC addresses. * @registered: protects ->resume and ->suspend sysfs callbacks against * unregister hardware * @debugfsdir: debugfs directory used for this wiphy (ieee80211/<wiphyname>). * It will be renamed automatically on wiphy renames * @dev: (virtual) struct device for this wiphy. The item in * /sys/class/ieee80211/ points to this. You need use set_wiphy_dev() * (see below). * @wext: wireless extension handlers * @priv: driver private data (sized according to wiphy_new() parameter) * @interface_modes: bitmask of interfaces types valid for this wiphy, * must be set by driver * @iface_combinations: Valid interface combinations array, should not * list single interface types. * @n_iface_combinations: number of entries in @iface_combinations array. * @software_iftypes: bitmask of software interface types, these are not * subject to any restrictions since they are purely managed in SW. * @flags: wiphy flags, see &enum wiphy_flags * @regulatory_flags: wiphy regulatory flags, see * &enum ieee80211_regulatory_flags * @features: features advertised to nl80211, see &enum nl80211_feature_flags. * @ext_features: extended features advertised to nl80211, see * &enum nl80211_ext_feature_index. * @bss_priv_size: each BSS struct has private data allocated with it, * this variable determines its size * @max_scan_ssids: maximum number of SSIDs the device can scan for in * any given scan * @max_sched_scan_reqs: maximum number of scheduled scan requests that * the device can run concurrently. * @max_sched_scan_ssids: maximum number of SSIDs the device can scan * for in any given scheduled scan * @max_match_sets: maximum number of match sets the device can handle * when performing a scheduled scan, 0 if filtering is not * supported. * @max_scan_ie_len: maximum length of user-controlled IEs device can * add to probe request frames transmitted during a scan, must not * include fixed IEs like supported rates * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled * scans * @max_sched_scan_plans: maximum number of scan plans (scan interval and number * of iterations) for scheduled scan supported by the device. * @max_sched_scan_plan_interval: maximum interval (in seconds) for a * single scan plan supported by the device. * @max_sched_scan_plan_iterations: maximum number of iterations for a single * scan plan supported by the device. * @coverage_class: current coverage class * @fw_version: firmware version for ethtool reporting * @hw_version: hardware version for ethtool reporting * @max_num_pmkids: maximum number of PMKIDs supported by device * @privid: a pointer that drivers can use to identify if an arbitrary * wiphy is theirs, e.g. in global notifiers * @bands: information about bands/channels supported by this device * * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or * transmitted through nl80211, points to an array indexed by interface * type * * @available_antennas_tx: bitmap of antennas which are available to be * configured as TX antennas. Antenna configuration commands will be * rejected unless this or @available_antennas_rx is set. * * @available_antennas_rx: bitmap of antennas which are available to be * configured as RX antennas. Antenna configuration commands will be * rejected unless this or @available_antennas_tx is set. * * @probe_resp_offload: * Bitmap of supported protocols for probe response offloading. * See &enum nl80211_probe_resp_offload_support_attr. Only valid * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. * * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation * may request, if implemented. * * @wowlan: WoWLAN support information * @wowlan_config: current WoWLAN configuration; this should usually not be * used since access to it is necessarily racy, use the parameter passed * to the suspend() operation instead. * * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden. * If null, then none can be over-ridden. * @vht_capa_mod_mask: Specify what VHT capabilities can be over-ridden. * If null, then none can be over-ridden. * * @wdev_list: the list of associated (virtual) interfaces; this list must * not be modified by the driver, but can be read with RTNL/RCU protection. * * @max_acl_mac_addrs: Maximum number of MAC addresses that the device * supports for ACL. * * @extended_capabilities: extended capabilities supported by the driver, * additional capabilities might be supported by userspace; these are * the 802.11 extended capabilities ("Extended Capabilities element") * and are in the same format as in the information element. See * 802.11-2012 8.4.2.29 for the defined fields. These are the default * extended capabilities to be used if the capabilities are not specified * for a specific interface type in iftype_ext_capab. * @extended_capabilities_mask: mask of the valid values * @extended_capabilities_len: length of the extended capabilities * @iftype_ext_capab: array of extended capabilities per interface type * @num_iftype_ext_capab: number of interface types for which extended * capabilities are specified separately. * @coalesce: packet coalescing support information * * @vendor_commands: array of vendor commands supported by the hardware * @n_vendor_commands: number of vendor commands * @vendor_events: array of vendor events supported by the hardware * @n_vendor_events: number of vendor events * * @max_ap_assoc_sta: maximum number of associated stations supported in AP mode * (including P2P GO) or 0 to indicate no such limit is advertised. The * driver is allowed to advertise a theoretical limit that it can reach in * some cases, but may not always reach. * * @max_num_csa_counters: Number of supported csa_counters in beacons * and probe responses. This value should be set if the driver * wishes to limit the number of csa counters. Default (0) means * infinite. * @bss_select_support: bitmask indicating the BSS selection criteria supported * by the driver in the .connect() callback. The bit position maps to the * attribute indices defined in &enum nl80211_bss_select_attr. * * @nan_supported_bands: bands supported by the device in NAN mode, a * bitmap of &enum nl80211_band values. For instance, for * NL80211_BAND_2GHZ, bit 0 would be set * (i.e. BIT(NL80211_BAND_2GHZ)). * * @txq_limit: configuration of internal TX queue frame limit * @txq_memory_limit: configuration internal TX queue memory limit * @txq_quantum: configuration of internal TX queue scheduler quantum * * @tx_queue_len: allow setting transmit queue len for drivers not using * wake_tx_queue * * @support_mbssid: can HW support association with nontransmitted AP * @support_only_he_mbssid: don't parse MBSSID elements if it is not * HE AP, in order to avoid compatibility issues. * @support_mbssid must be set for this to have any effect. * * @pmsr_capa: peer measurement capabilities * * @tid_config_support: describes the per-TID config support that the * device has * @tid_config_support.vif: bitmap of attributes (configurations) * supported by the driver for each vif * @tid_config_support.peer: bitmap of attributes (configurations) * supported by the driver for each peer * @tid_config_support.max_retry: maximum supported retry count for * long/short retry configuration * * @max_data_retry_count: maximum supported per TID retry count for * configuration through the %NL80211_TID_CONFIG_ATTR_RETRY_SHORT and * %NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes */ struct wiphy { /* assign these fields before you register the wiphy */ u8 perm_addr[ETH_ALEN]; u8 addr_mask[ETH_ALEN]; struct mac_address *addresses; const struct ieee80211_txrx_stypes *mgmt_stypes; const struct ieee80211_iface_combination *iface_combinations; int n_iface_combinations; u16 software_iftypes; u16 n_addresses; /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; u16 max_acl_mac_addrs; u32 flags, regulatory_flags, features; u8 ext_features[DIV_ROUND_UP(NUM_NL80211_EXT_FEATURES, 8)]; u32 ap_sme_capa; enum cfg80211_signal_type signal_type; int bss_priv_size; u8 max_scan_ssids; u8 max_sched_scan_reqs; u8 max_sched_scan_ssids; u8 max_match_sets; u16 max_scan_ie_len; u16 max_sched_scan_ie_len; u32 max_sched_scan_plans; u32 max_sched_scan_plan_interval; u32 max_sched_scan_plan_iterations; int n_cipher_suites; const u32 *cipher_suites; int n_akm_suites; const u32 *akm_suites; const struct wiphy_iftype_akm_suites *iftype_akm_suites; unsigned int num_iftype_akm_suites; u8 retry_short; u8 retry_long; u32 frag_threshold; u32 rts_threshold; u8 coverage_class; char fw_version[ETHTOOL_FWVERS_LEN]; u32 hw_version; #ifdef CONFIG_PM const struct wiphy_wowlan_support *wowlan; struct cfg80211_wowlan *wowlan_config; #endif u16 max_remain_on_channel_duration; u8 max_num_pmkids; u32 available_antennas_tx; u32 available_antennas_rx; u32 probe_resp_offload; const u8 *extended_capabilities, *extended_capabilities_mask; u8 extended_capabilities_len; const struct wiphy_iftype_ext_capab *iftype_ext_capab; unsigned int num_iftype_ext_capab; const void *privid; struct ieee80211_supported_band *bands[NUM_NL80211_BANDS]; void (*reg_notifier)(struct wiphy *wiphy, struct regulatory_request *request); /* fields below are read-only, assigned by cfg80211 */ const struct ieee80211_regdomain __rcu *regd; struct device dev; bool registered; struct dentry *debugfsdir; const struct ieee80211_ht_cap *ht_capa_mod_mask; const struct ieee80211_vht_cap *vht_capa_mod_mask; struct list_head wdev_list; possible_net_t _net; #ifdef CONFIG_CFG80211_WEXT const struct iw_handler_def *wext; #endif const struct wiphy_coalesce_support *coalesce; const struct wiphy_vendor_command *vendor_commands; const struct nl80211_vendor_cmd_info *vendor_events; int n_vendor_commands, n_vendor_events; u16 max_ap_assoc_sta; u8 max_num_csa_counters; u32 bss_select_support; u8 nan_supported_bands; u32 txq_limit; u32 txq_memory_limit; u32 txq_quantum; unsigned long tx_queue_len; u8 support_mbssid:1, support_only_he_mbssid:1; const struct cfg80211_pmsr_capabilities *pmsr_capa; struct { u64 peer, vif; u8 max_retry; } tid_config_support; u8 max_data_retry_count; char priv[] __aligned(NETDEV_ALIGN); }; static inline struct net *wiphy_net(struct wiphy *wiphy) { return read_pnet(&wiphy->_net); } static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) { write_pnet(&wiphy->_net, net); } /** * wiphy_priv - return priv from wiphy * * @wiphy: the wiphy whose priv pointer to return * Return: The priv of @wiphy. */ static inline void *wiphy_priv(struct wiphy *wiphy) { BUG_ON(!wiphy); return &wiphy->priv; } /** * priv_to_wiphy - return the wiphy containing the priv * * @priv: a pointer previously returned by wiphy_priv * Return: The wiphy of @priv. */ static inline struct wiphy *priv_to_wiphy(void *priv) { BUG_ON(!priv); return container_of(priv, struct wiphy, priv); } /** * set_wiphy_dev - set device pointer for wiphy * * @wiphy: The wiphy whose device to bind * @dev: The device to parent it to */ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) { wiphy->dev.parent = dev; } /** * wiphy_dev - get wiphy dev pointer * * @wiphy: The wiphy whose device struct to look up * Return: The dev of @wiphy. */ static inline struct device *wiphy_dev(struct wiphy *wiphy) { return wiphy->dev.parent; } /** * wiphy_name - get wiphy name * * @wiphy: The wiphy whose name to return * Return: The name of @wiphy. */ static inline const char *wiphy_name(const struct wiphy *wiphy) { return dev_name(&wiphy->dev); } /** * wiphy_new_nm - create a new wiphy for use with cfg80211 * * @ops: The configuration operations for this device * @sizeof_priv: The size of the private area to allocate * @requested_name: Request a particular name. * NULL is valid value, and means use the default phy%d naming. * * Create a new wiphy and associate the given operations with it. * @sizeof_priv bytes are allocated for private use. * * Return: A pointer to the new wiphy. This pointer must be * assigned to each netdev's ieee80211_ptr for proper operation. */ struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv, const char *requested_name); /** * wiphy_new - create a new wiphy for use with cfg80211 * * @ops: The configuration operations for this device * @sizeof_priv: The size of the private area to allocate * * Create a new wiphy and associate the given operations with it. * @sizeof_priv bytes are allocated for private use. * * Return: A pointer to the new wiphy. This pointer must be * assigned to each netdev's ieee80211_ptr for proper operation. */ static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) { return wiphy_new_nm(ops, sizeof_priv, NULL); } /** * wiphy_register - register a wiphy with cfg80211 * * @wiphy: The wiphy to register. * * Return: A non-negative wiphy index or a negative error code. */ int wiphy_register(struct wiphy *wiphy); /** * wiphy_unregister - deregister a wiphy from cfg80211 * * @wiphy: The wiphy to unregister. * * After this call, no more requests can be made with this priv * pointer, but the call may sleep to wait for an outstanding * request that is being handled. */ void wiphy_unregister(struct wiphy *wiphy); /** * wiphy_free - free wiphy * * @wiphy: The wiphy to free */ void wiphy_free(struct wiphy *wiphy); /* internal structs */ struct cfg80211_conn; struct cfg80211_internal_bss; struct cfg80211_cached_keys; struct cfg80211_cqm_config; /** * struct wireless_dev - wireless device state * * For netdevs, this structure must be allocated by the driver * that uses the ieee80211_ptr field in struct net_device (this * is intentional so it can be allocated along with the netdev.) * It need not be registered then as netdev registration will * be intercepted by cfg80211 to see the new wireless device. * * For non-netdev uses, it must also be allocated by the driver * in response to the cfg80211 callbacks that require it, as * there's no netdev registration in that case it may not be * allocated outside of callback operations that return it. * * @wiphy: pointer to hardware description * @iftype: interface type * @list: (private) Used to collect the interfaces * @netdev: (private) Used to reference back to the netdev, may be %NULL * @identifier: (private) Identifier used in nl80211 to identify this * wireless device if it has no netdev * @current_bss: (private) Used by the internal configuration code * @chandef: (private) Used by the internal configuration code to track * the user-set channel definition. * @preset_chandef: (private) Used by the internal configuration code to * track the channel to be used for AP later * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code * @mesh_id_len: (private) Used by the internal configuration code * @mesh_id_up_len: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code * @wext.ibss: (private) IBSS data part of wext handling * @wext.connect: (private) connection handling data * @wext.keys: (private) (WEP) key data * @wext.ie: (private) extra elements for association * @wext.ie_len: (private) length of extra elements * @wext.bssid: (private) selected network BSSID * @wext.ssid: (private) selected network SSID * @wext.default_key: (private) selected default key index * @wext.default_mgmt_key: (private) selected default management key index * @wext.prev_bssid: (private) previous BSSID for reassociation * @wext.prev_bssid_valid: (private) previous BSSID validity * @use_4addr: indicates 4addr mode is used on this interface, must be * set by driver (if supported) on add_interface BEFORE registering the * netdev and may otherwise be used by driver read-only, will be update * by cfg80211 on change_interface * @mgmt_registrations: list of registrations for management frames * @mgmt_registrations_need_update: mgmt registrations were updated, * need to propagate the update to the driver * @mtx: mutex used to lock data in this struct, may be used by drivers * and some API functions require it held * @beacon_interval: beacon interval used on this device for transmitting * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @is_running: true if this is a non-netdev device that has been started, e.g. * the P2P Device. * @cac_started: true if DFS channel availability check has been started * @cac_start_time: timestamp (jiffies) when the dfs state was entered. * @cac_time_ms: CAC time in ms * @ps: powersave mode is enabled * @ps_timeout: dynamic powersave timeout * @ap_unexpected_nlportid: (private) netlink port ID of application * registered for unexpected class 3 frames (AP mode) * @conn: (private) cfg80211 software SME connection state machine data * @connect_keys: (private) keys to set after connection is established * @conn_bss_type: connecting/connected BSS type * @conn_owner_nlportid: (private) connection owner socket port ID * @disconnect_wk: (private) auto-disconnect work * @disconnect_bssid: (private) the BSSID to use for auto-disconnect * @ibss_fixed: (private) IBSS is using fixed BSSID * @ibss_dfs_possible: (private) IBSS may change to a DFS channel * @event_list: (private) list for internal event processing * @event_lock: (private) lock for event list * @owner_nlportid: (private) owner socket port ID * @nl_owner_dead: (private) owner socket went away * @cqm_config: (private) nl80211 RSSI monitor state * @pmsr_list: (private) peer measurement requests * @pmsr_lock: (private) peer measurements requests/results lock * @pmsr_free_wk: (private) peer measurements cleanup work * @unprot_beacon_reported: (private) timestamp of last * unprotected beacon report */ struct wireless_dev { struct wiphy *wiphy; enum nl80211_iftype iftype; /* the remainder of this struct should be private to cfg80211 */ struct list_head list; struct net_device *netdev; u32 identifier; struct list_head mgmt_registrations; u8 mgmt_registrations_need_update:1; struct mutex mtx; bool use_4addr, is_running; u8 address[ETH_ALEN] __aligned(sizeof(u16)); /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len, mesh_id_len, mesh_id_up_len; struct cfg80211_conn *conn; struct cfg80211_cached_keys *connect_keys; enum ieee80211_bss_type conn_bss_type; u32 conn_owner_nlportid; struct work_struct disconnect_wk; u8 disconnect_bssid[ETH_ALEN]; struct list_head event_list; spinlock_t event_lock; struct cfg80211_internal_bss *current_bss; /* associated / joined */ struct cfg80211_chan_def preset_chandef; struct cfg80211_chan_def chandef; bool ibss_fixed; bool ibss_dfs_possible; bool ps; int ps_timeout; int beacon_interval; u32 ap_unexpected_nlportid; u32 owner_nlportid; bool nl_owner_dead; bool cac_started; unsigned long cac_start_time; unsigned int cac_time_ms; #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { struct cfg80211_ibss_params ibss; struct cfg80211_connect_params connect; struct cfg80211_cached_keys *keys; const u8 *ie; size_t ie_len; u8 bssid[ETH_ALEN]; u8 prev_bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; s8 default_key, default_mgmt_key; bool prev_bssid_valid; } wext; #endif struct cfg80211_cqm_config *cqm_config; struct list_head pmsr_list; spinlock_t pmsr_lock; struct work_struct pmsr_free_wk; unsigned long unprot_beacon_reported; }; static inline u8 *wdev_address(struct wireless_dev *wdev) { if (wdev->netdev) return wdev->netdev->dev_addr; return wdev->address; } static inline bool wdev_running(struct wireless_dev *wdev) { if (wdev->netdev) return netif_running(wdev->netdev); return wdev->is_running; } /** * wdev_priv - return wiphy priv from wireless_dev * * @wdev: The wireless device whose wiphy's priv pointer to return * Return: The wiphy priv of @wdev. */ static inline void *wdev_priv(struct wireless_dev *wdev) { BUG_ON(!wdev); return wiphy_priv(wdev->wiphy); } /** * DOC: Utility functions * * cfg80211 offers a number of utility functions that can be useful. */ /** * ieee80211_channel_equal - compare two struct ieee80211_channel * * @a: 1st struct ieee80211_channel * @b: 2nd struct ieee80211_channel * Return: true if center frequency of @a == @b */ static inline bool ieee80211_channel_equal(struct ieee80211_channel *a, struct ieee80211_channel *b) { return (a->center_freq == b->center_freq && a->freq_offset == b->freq_offset); } /** * ieee80211_channel_to_khz - convert ieee80211_channel to frequency in KHz * @chan: struct ieee80211_channel to convert * Return: The corresponding frequency (in KHz) */ static inline u32 ieee80211_channel_to_khz(const struct ieee80211_channel *chan) { return MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset; } /** * ieee80211_s1g_channel_width - get allowed channel width from @chan * * Only allowed for band NL80211_BAND_S1GHZ * @chan: channel * Return: The allowed channel width for this center_freq */ enum nl80211_chan_width ieee80211_s1g_channel_width(const struct ieee80211_channel *chan); /** * ieee80211_channel_to_freq_khz - convert channel number to frequency * @chan: channel number * @band: band, necessary due to channel number overlap * Return: The corresponding frequency (in KHz), or 0 if the conversion failed. */ u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band); /** * ieee80211_channel_to_frequency - convert channel number to frequency * @chan: channel number * @band: band, necessary due to channel number overlap * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. */ static inline int ieee80211_channel_to_frequency(int chan, enum nl80211_band band) { return KHZ_TO_MHZ(ieee80211_channel_to_freq_khz(chan, band)); } /** * ieee80211_freq_khz_to_channel - convert frequency to channel number * @freq: center frequency in KHz * Return: The corresponding channel, or 0 if the conversion failed. */ int ieee80211_freq_khz_to_channel(u32 freq); /** * ieee80211_frequency_to_channel - convert frequency to channel number * @freq: center frequency in MHz * Return: The corresponding channel, or 0 if the conversion failed. */ static inline int ieee80211_frequency_to_channel(int freq) { return ieee80211_freq_khz_to_channel(MHZ_TO_KHZ(freq)); } /** * ieee80211_get_channel_khz - get channel struct from wiphy for specified * frequency * @wiphy: the struct wiphy to get the channel for * @freq: the center frequency (in KHz) of the channel * Return: The channel struct from @wiphy at @freq. */ struct ieee80211_channel * ieee80211_get_channel_khz(struct wiphy *wiphy, u32 freq); /** * ieee80211_get_channel - get channel struct from wiphy for specified frequency * * @wiphy: the struct wiphy to get the channel for * @freq: the center frequency (in MHz) of the channel * Return: The channel struct from @wiphy at @freq. */ static inline struct ieee80211_channel * ieee80211_get_channel(struct wiphy *wiphy, int freq) { return ieee80211_get_channel_khz(wiphy, MHZ_TO_KHZ(freq)); } /** * cfg80211_channel_is_psc - Check if the channel is a 6 GHz PSC * @chan: control channel to check * * The Preferred Scanning Channels (PSC) are defined in * Draft IEEE P802.11ax/D5.0, 26.17.2.3.3 */ static inline bool cfg80211_channel_is_psc(struct ieee80211_channel *chan) { if (chan->band != NL80211_BAND_6GHZ) return false; return ieee80211_frequency_to_channel(chan->center_freq) % 16 == 5; } /** * ieee80211_get_response_rate - get basic rate for a given rate * * @sband: the band to look for rates in * @basic_rates: bitmap of basic rates * @bitrate: the bitrate for which to find the basic rate * * Return: The basic rate corresponding to a given bitrate, that * is the next lower bitrate contained in the basic rate map, * which is, for this function, given as a bitmap of indices of * rates in the band's bitrate table. */ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, u32 basic_rates, int bitrate); /** * ieee80211_mandatory_rates - get mandatory rates for a given band * @sband: the band to look for rates in * @scan_width: width of the control channel * * This function returns a bitmap of the mandatory rates for the given * band, bits are set according to the rate position in the bitrates array. */ u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband, enum nl80211_bss_scan_width scan_width); /* * Radiotap parsing functions -- for controlled injection support * * Implemented in net/wireless/radiotap.c * Documentation in Documentation/networking/radiotap-headers.rst */ struct radiotap_align_size { uint8_t align:4, size:4; }; struct ieee80211_radiotap_namespace { const struct radiotap_align_size *align_size; int n_bits; uint32_t oui; uint8_t subns; }; struct ieee80211_radiotap_vendor_namespaces { const struct ieee80211_radiotap_namespace *ns; int n_ns; }; /** * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args * @this_arg_index: index of current arg, valid after each successful call * to ieee80211_radiotap_iterator_next() * @this_arg: pointer to current radiotap arg; it is valid after each * call to ieee80211_radiotap_iterator_next() but also after * ieee80211_radiotap_iterator_init() where it will point to * the beginning of the actual data portion * @this_arg_size: length of the current arg, for convenience * @current_namespace: pointer to the current namespace definition * (or internally %NULL if the current namespace is unknown) * @is_radiotap_ns: indicates whether the current namespace is the default * radiotap namespace or not * * @_rtheader: pointer to the radiotap header we are walking through * @_max_length: length of radiotap header in cpu byte ordering * @_arg_index: next argument index * @_arg: next argument pointer * @_next_bitmap: internal pointer to next present u32 * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present * @_vns: vendor namespace definitions * @_next_ns_data: beginning of the next namespace's data * @_reset_on_ext: internal; reset the arg index to 0 when going to the * next bitmap word * * Describes the radiotap parser state. Fields prefixed with an underscore * must not be used by users of the parser, only by the parser internally. */ struct ieee80211_radiotap_iterator { struct ieee80211_radiotap_header *_rtheader; const struct ieee80211_radiotap_vendor_namespaces *_vns; const struct ieee80211_radiotap_namespace *current_namespace; unsigned char *_arg, *_next_ns_data; __le32 *_next_bitmap; unsigned char *this_arg; int this_arg_index; int this_arg_size; int is_radiotap_ns; int _max_length; int _arg_index; uint32_t _bitmap_shifter; int _reset_on_ext; }; int ieee80211_radiotap_iterator_init(struct ieee80211_radiotap_iterator *iterator, struct ieee80211_radiotap_header *radiotap_header, int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns); int ieee80211_radiotap_iterator_next(struct ieee80211_radiotap_iterator *iterator); extern const unsigned char rfc1042_header[6]; extern const unsigned char bridge_tunnel_header[6]; /** * ieee80211_get_hdrlen_from_skb - get header length from data * * @skb: the frame * * Given an skb with a raw 802.11 header at the data pointer this function * returns the 802.11 header length. * * Return: The 802.11 header length in bytes (not including encryption * headers). Or 0 if the data in the sk_buff is too short to contain a valid * 802.11 header. */ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_hdrlen - get header length in bytes from frame control * @fc: frame control field in little-endian format * Return: The header length in bytes. */ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); /** * ieee80211_get_mesh_hdrlen - get mesh extension header length * @meshhdr: the mesh extension header, only the flags field * (first byte) will be accessed * Return: The length of the extension header, which is always at * least 6 bytes and at most 18 if address 5 and 6 are present. */ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); /** * DOC: Data path helpers * * In addition to generic utilities, cfg80211 also offers * functions that help implement the data path for devices * that do not do the 802.11/802.3 conversion on the device. */ /** * ieee80211_data_to_8023_exthdr - convert an 802.11 data frame to 802.3 * @skb: the 802.11 data frame * @ehdr: pointer to a &struct ethhdr that will get the header, instead * of it being pushed into the SKB * @addr: the device MAC address * @iftype: the virtual interface type * @data_offset: offset of payload after the 802.11 header * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, const u8 *addr, enum nl80211_iftype iftype, u8 data_offset, bool is_amsdu); /** * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 * @skb: the 802.11 data frame * @addr: the device MAC address * @iftype: the virtual interface type * Return: 0 on success. Non-zero on error. */ static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype) { return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0, false); } /** * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame * * Decode an IEEE 802.11 A-MSDU and convert it to a list of 802.3 frames. * The @list will be empty if the decode fails. The @skb must be fully * header-less before being passed in here; it is freed in this function. * * @skb: The input A-MSDU frame without any headers. * @list: The output list of 802.3 frames. It must be allocated and * initialized by the caller. * @addr: The device MAC address. * @iftype: The device interface type. * @extra_headroom: The hardware extra headroom for SKBs in the @list. * @check_da: DA to check in the inner ethernet header, or NULL * @check_sa: SA to check in the inner ethernet header, or NULL */ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, const u8 *addr, enum nl80211_iftype iftype, const unsigned int extra_headroom, const u8 *check_da, const u8 *check_sa); /** * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame * @skb: the data frame * @qos_map: Interworking QoS mapping or %NULL if not in use * Return: The 802.1p/1d tag. */ unsigned int cfg80211_classify8021d(struct sk_buff *skb, struct cfg80211_qos_map *qos_map); /** * cfg80211_find_elem_match - match information element and byte array in data * * @eid: element ID * @ies: data consisting of IEs * @len: length of data * @match: byte array to match * @match_len: number of bytes in the match array * @match_offset: offset in the IE data where the byte array should match. * Note the difference to cfg80211_find_ie_match() which considers * the offset to start from the element ID byte, but here we take * the data portion instead. * * Return: %NULL if the element ID could not be found or if * the element is invalid (claims to be longer than the given * data) or if the byte array doesn't match; otherwise return the * requested element struct. * * Note: There are no checks on the element length other than * having to fit into the given data and being large enough for the * byte array to match. */ const struct element * cfg80211_find_elem_match(u8 eid, const u8 *ies, unsigned int len, const u8 *match, unsigned int match_len, unsigned int match_offset); /** * cfg80211_find_ie_match - match information element and byte array in data * * @eid: element ID * @ies: data consisting of IEs * @len: length of data * @match: byte array to match * @match_len: number of bytes in the match array * @match_offset: offset in the IE where the byte array should match. * If match_len is zero, this must also be set to zero. * Otherwise this must be set to 2 or more, because the first * byte is the element id, which is already compared to eid, and * the second byte is the IE length. * * Return: %NULL if the element ID could not be found or if * the element is invalid (claims to be longer than the given * data) or if the byte array doesn't match, or a pointer to the first * byte of the requested element, that is the byte containing the * element ID. * * Note: There are no checks on the element length other than * having to fit into the given data and being large enough for the * byte array to match. */ static inline const u8 * cfg80211_find_ie_match(u8 eid, const u8 *ies, unsigned int len, const u8 *match, unsigned int match_len, unsigned int match_offset) { /* match_offset can't be smaller than 2, unless match_len is * zero, in which case match_offset must be zero as well. */ if (WARN_ON((match_len && match_offset < 2) || (!match_len && match_offset))) return NULL; return (void *)cfg80211_find_elem_match(eid, ies, len, match, match_len, match_offset ? match_offset - 2 : 0); } /** * cfg80211_find_elem - find information element in data * * @eid: element ID * @ies: data consisting of IEs * @len: length of data * * Return: %NULL if the element ID could not be found or if * the element is invalid (claims to be longer than the given * data) or if the byte array doesn't match; otherwise return the * requested element struct. * * Note: There are no checks on the element length other than * having to fit into the given data. */ static inline const struct element * cfg80211_find_elem(u8 eid, const u8 *ies, int len) { return cfg80211_find_elem_match(eid, ies, len, NULL, 0, 0); } /** * cfg80211_find_ie - find information element in data * * @eid: element ID * @ies: data consisting of IEs * @len: length of data * * Return: %NULL if the element ID could not be found or if * the element is invalid (claims to be longer than the given * data), or a pointer to the first byte of the requested * element, that is the byte containing the element ID. * * Note: There are no checks on the element length other than * having to fit into the given data. */ static inline const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len) { return cfg80211_find_ie_match(eid, ies, len, NULL, 0, 0); } /** * cfg80211_find_ext_elem - find information element with EID Extension in data * * @ext_eid: element ID Extension * @ies: data consisting of IEs * @len: length of data * * Return: %NULL if the etended element could not be found or if * the element is invalid (claims to be longer than the given * data) or if the byte array doesn't match; otherwise return the * requested element struct. * * Note: There are no checks on the element length other than * having to fit into the given data. */ static inline const struct element * cfg80211_find_ext_elem(u8 ext_eid, const u8 *ies, int len) { return cfg80211_find_elem_match(WLAN_EID_EXTENSION, ies, len, &ext_eid, 1, 0); } /** * cfg80211_find_ext_ie - find information element with EID Extension in data * * @ext_eid: element ID Extension * @ies: data consisting of IEs * @len: length of data * * Return: %NULL if the extended element ID could not be found or if * the element is invalid (claims to be longer than the given * data), or a pointer to the first byte of the requested * element, that is the byte containing the element ID. * * Note: There are no checks on the element length other than * having to fit into the given data. */ static inline const u8 *cfg80211_find_ext_ie(u8 ext_eid, const u8 *ies, int len) { return cfg80211_find_ie_match(WLAN_EID_EXTENSION, ies, len, &ext_eid, 1, 2); } /** * cfg80211_find_vendor_elem - find vendor specific information element in data * * @oui: vendor OUI * @oui_type: vendor-specific OUI type (must be < 0xff), negative means any * @ies: data consisting of IEs * @len: length of data * * Return: %NULL if the vendor specific element ID could not be found or if the * element is invalid (claims to be longer than the given data); otherwise * return the element structure for the requested element. * * Note: There are no checks on the element length other than having to fit into * the given data. */ const struct element *cfg80211_find_vendor_elem(unsigned int oui, int oui_type, const u8 *ies, unsigned int len); /** * cfg80211_find_vendor_ie - find vendor specific information element in data * * @oui: vendor OUI * @oui_type: vendor-specific OUI type (must be < 0xff), negative means any * @ies: data consisting of IEs * @len: length of data * * Return: %NULL if the vendor specific element ID could not be found or if the * element is invalid (claims to be longer than the given data), or a pointer to * the first byte of the requested element, that is the byte containing the * element ID. * * Note: There are no checks on the element length other than having to fit into * the given data. */ static inline const u8 * cfg80211_find_vendor_ie(unsigned int oui, int oui_type, const u8 *ies, unsigned int len) { return (void *)cfg80211_find_vendor_elem(oui, oui_type, ies, len); } /** * cfg80211_send_layer2_update - send layer 2 update frame * * @dev: network device * @addr: STA MAC address * * Wireless drivers can use this function to update forwarding tables in bridge * devices upon STA association. */ void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr); /** * DOC: Regulatory enforcement infrastructure * * TODO */ /** * regulatory_hint - driver hint to the wireless core a regulatory domain * @wiphy: the wireless device giving the hint (used only for reporting * conflicts) * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain * should be in. If @rd is set this should be NULL. Note that if you * set this to NULL you should still set rd->alpha2 to some accepted * alpha2. * * Wireless drivers can use this function to hint to the wireless core * what it believes should be the current regulatory domain by * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory * domain should be in or by providing a completely build regulatory domain. * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried * for a regulatory domain structure for the respective country. * * The wiphy must have been registered to cfg80211 prior to this call. * For cfg80211 drivers this means you must first use wiphy_register(), * for mac80211 drivers you must first use ieee80211_register_hw(). * * Drivers should check the return value, its possible you can get * an -ENOMEM. * * Return: 0 on success. -ENOMEM. */ int regulatory_hint(struct wiphy *wiphy, const char *alpha2); /** * regulatory_set_wiphy_regd - set regdom info for self managed drivers * @wiphy: the wireless device we want to process the regulatory domain on * @rd: the regulatory domain informatoin to use for this wiphy * * Set the regulatory domain information for self-managed wiphys, only they * may use this function. See %REGULATORY_WIPHY_SELF_MANAGED for more * information. * * Return: 0 on success. -EINVAL, -EPERM */ int regulatory_set_wiphy_regd(struct wiphy *wiphy, struct ieee80211_regdomain *rd); /** * regulatory_set_wiphy_regd_sync_rtnl - set regdom for self-managed drivers * @wiphy: the wireless device we want to process the regulatory domain on * @rd: the regulatory domain information to use for this wiphy * * This functions requires the RTNL to be held and applies the new regdomain * synchronously to this wiphy. For more details see * regulatory_set_wiphy_regd(). * * Return: 0 on success. -EINVAL, -EPERM */ int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy, struct ieee80211_regdomain *rd); /** * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain * @wiphy: the wireless device we want to process the regulatory domain on * @regd: the custom regulatory domain to use for this wiphy * * Drivers can sometimes have custom regulatory domains which do not apply * to a specific country. Drivers can use this to apply such custom regulatory * domains. This routine must be called prior to wiphy registration. The * custom regulatory domain will be trusted completely and as such previous * default channel settings will be disregarded. If no rule is found for a * channel on the regulatory domain the channel will be disabled. * Drivers using this for a wiphy should also set the wiphy flag * REGULATORY_CUSTOM_REG or cfg80211 will set it for the wiphy * that called this helper. */ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, const struct ieee80211_regdomain *regd); /** * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for * * Use this function to get the regulatory rule for a specific frequency on * a given wireless device. If the device has a specific regulatory domain * it wants to follow we respect that unless a country IE has been received * and processed already. * * Return: A valid pointer, or, when an error occurs, for example if no rule * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to * check and PTR_ERR() to obtain the numeric return value. The numeric return * value will be -ERANGE if we determine the given center_freq does not even * have a regulatory rule for a frequency range in the center_freq's band. * See freq_in_rule_band() for our current definition of a band -- this is * purely subjective and right now it's 802.11 specific. */ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, u32 center_freq); /** * reg_initiator_name - map regulatory request initiator enum to name * @initiator: the regulatory request initiator * * You can use this to map the regulatory request initiator enum to a * proper string representation. */ const char *reg_initiator_name(enum nl80211_reg_initiator initiator); /** * regulatory_pre_cac_allowed - check if pre-CAC allowed in the current regdom * @wiphy: wiphy for which pre-CAC capability is checked. * * Pre-CAC is allowed only in some regdomains (notable ETSI). */ bool regulatory_pre_cac_allowed(struct wiphy *wiphy); /** * DOC: Internal regulatory db functions * */ /** * reg_query_regdb_wmm - Query internal regulatory db for wmm rule * Regulatory self-managed driver can use it to proactively * * @alpha2: the ISO/IEC 3166 alpha2 wmm rule to be queried. * @freq: the freqency(in MHz) to be queried. * @rule: pointer to store the wmm rule from the regulatory db. * * Self-managed wireless drivers can use this function to query * the internal regulatory database to check whether the given * ISO/IEC 3166 alpha2 country and freq have wmm rule limitations. * * Drivers should check the return value, its possible you can get * an -ENODATA. * * Return: 0 on success. -ENODATA. */ int reg_query_regdb_wmm(char *alpha2, int freq, struct ieee80211_reg_rule *rule); /* * callbacks for asynchronous cfg80211 methods, notification * functions and BSS handling helpers */ /** * cfg80211_scan_done - notify that scan finished * * @request: the corresponding scan request * @info: information about the completed scan */ void cfg80211_scan_done(struct cfg80211_scan_request *request, struct cfg80211_scan_info *info); /** * cfg80211_sched_scan_results - notify that new scan results are available * * @wiphy: the wiphy which got scheduled scan results * @reqid: identifier for the related scheduled scan request */ void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid); /** * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped * @reqid: identifier for the related scheduled scan request * * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. */ void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid); /** * cfg80211_sched_scan_stopped_rtnl - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped * @reqid: identifier for the related scheduled scan request * * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. * This function should be called with rtnl locked. */ void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid); /** * cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame * @wiphy: the wiphy reporting the BSS * @data: the BSS metadata * @mgmt: the management frame (probe response or beacon) * @len: length of the management frame * @gfp: context flags * * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * * Return: A referenced struct, must be released with cfg80211_put_bss()! * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss_frame_data(struct wiphy *wiphy, struct cfg80211_inform_bss *data, struct ieee80211_mgmt *mgmt, size_t len, gfp_t gfp); static inline struct cfg80211_bss * __must_check cfg80211_inform_bss_width_frame(struct wiphy *wiphy, struct ieee80211_channel *rx_channel, enum nl80211_bss_scan_width scan_width, struct ieee80211_mgmt *mgmt, size_t len, s32 signal, gfp_t gfp) { struct cfg80211_inform_bss data = { .chan = rx_channel, .scan_width = scan_width, .signal = signal, }; return cfg80211_inform_bss_frame_data(wiphy, &data, mgmt, len, gfp); } static inline struct cfg80211_bss * __must_check cfg80211_inform_bss_frame(struct wiphy *wiphy, struct ieee80211_channel *rx_channel, struct ieee80211_mgmt *mgmt, size_t len, s32 signal, gfp_t gfp) { struct cfg80211_inform_bss data = { .chan = rx_channel, .scan_width = NL80211_BSS_CHAN_WIDTH_20, .signal = signal, }; return cfg80211_inform_bss_frame_data(wiphy, &data, mgmt, len, gfp); } /** * cfg80211_gen_new_bssid - generate a nontransmitted BSSID for multi-BSSID * @bssid: transmitter BSSID * @max_bssid: max BSSID indicator, taken from Multiple BSSID element * @mbssid_index: BSSID index, taken from Multiple BSSID index element * @new_bssid: calculated nontransmitted BSSID */ static inline void cfg80211_gen_new_bssid(const u8 *bssid, u8 max_bssid, u8 mbssid_index, u8 *new_bssid) { u64 bssid_u64 = ether_addr_to_u64(bssid); u64 mask = GENMASK_ULL(max_bssid - 1, 0); u64 new_bssid_u64; new_bssid_u64 = bssid_u64 & ~mask; new_bssid_u64 |= ((bssid_u64 & mask) + mbssid_index) & mask; u64_to_ether_addr(new_bssid_u64, new_bssid); } /** * cfg80211_is_element_inherited - returns if element ID should be inherited * @element: element to check * @non_inherit_element: non inheritance element */ bool cfg80211_is_element_inherited(const struct element *element, const struct element *non_inherit_element); /** * cfg80211_merge_profile - merges a MBSSID profile if it is split between IEs * @ie: ies * @ielen: length of IEs * @mbssid_elem: current MBSSID element * @sub_elem: current MBSSID subelement (profile) * @merged_ie: location of the merged profile * @max_copy_len: max merged profile length */ size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, const struct element *mbssid_elem, const struct element *sub_elem, u8 *merged_ie, size_t max_copy_len); /** * enum cfg80211_bss_frame_type - frame type that the BSS data came from * @CFG80211_BSS_FTYPE_UNKNOWN: driver doesn't know whether the data is * from a beacon or probe response * @CFG80211_BSS_FTYPE_BEACON: data comes from a beacon * @CFG80211_BSS_FTYPE_PRESP: data comes from a probe response */ enum cfg80211_bss_frame_type { CFG80211_BSS_FTYPE_UNKNOWN, CFG80211_BSS_FTYPE_BEACON, CFG80211_BSS_FTYPE_PRESP, }; /** * cfg80211_inform_bss_data - inform cfg80211 of a new BSS * * @wiphy: the wiphy reporting the BSS * @data: the BSS metadata * @ftype: frame type (if known) * @bssid: the BSSID of the BSS * @tsf: the TSF sent by the peer in the beacon/probe response (or 0) * @capability: the capability field sent by the peer * @beacon_interval: the beacon interval announced by the peer * @ie: additional IEs sent by the peer * @ielen: length of the additional IEs * @gfp: context flags * * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * * Return: A referenced struct, must be released with cfg80211_put_bss()! * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss_data(struct wiphy *wiphy, struct cfg80211_inform_bss *data, enum cfg80211_bss_frame_type ftype, const u8 *bssid, u64 tsf, u16 capability, u16 beacon_interval, const u8 *ie, size_t ielen, gfp_t gfp); static inline struct cfg80211_bss * __must_check cfg80211_inform_bss_width(struct wiphy *wiphy, struct ieee80211_channel *rx_channel, enum nl80211_bss_scan_width scan_width, enum cfg80211_bss_frame_type ftype, const u8 *bssid, u64 tsf, u16 capability, u16 beacon_interval, const u8 *ie, size_t ielen, s32 signal, gfp_t gfp) { struct cfg80211_inform_bss data = { .chan = rx_channel, .scan_width = scan_width, .signal = signal, }; return cfg80211_inform_bss_data(wiphy, &data, ftype, bssid, tsf, capability, beacon_interval, ie, ielen, gfp); } static inline struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, struct ieee80211_channel *rx_channel, enum cfg80211_bss_frame_type ftype, const u8 *bssid, u64 tsf, u16 capability, u16 beacon_interval, const u8 *ie, size_t ielen, s32 signal, gfp_t gfp) { struct cfg80211_inform_bss data = { .chan = rx_channel, .scan_width = NL80211_BSS_CHAN_WIDTH_20, .signal = signal, }; return cfg80211_inform_bss_data(wiphy, &data, ftype, bssid, tsf, capability, beacon_interval, ie, ielen, gfp); } /** * cfg80211_get_bss - get a BSS reference * @wiphy: the wiphy this BSS struct belongs to * @channel: the channel to search on (or %NULL) * @bssid: the desired BSSID (or %NULL) * @ssid: the desired SSID (or %NULL) * @ssid_len: length of the SSID (or 0) * @bss_type: type of BSS, see &enum ieee80211_bss_type * @privacy: privacy filter, see &enum ieee80211_privacy */ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *bssid, const u8 *ssid, size_t ssid_len, enum ieee80211_bss_type bss_type, enum ieee80211_privacy privacy); static inline struct cfg80211_bss * cfg80211_get_ibss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *ssid, size_t ssid_len) { return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len, IEEE80211_BSS_TYPE_IBSS, IEEE80211_PRIVACY_ANY); } /** * cfg80211_ref_bss - reference BSS struct * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct to reference * * Increments the refcount of the given BSS struct. */ void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_put_bss - unref BSS struct * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct * * Decrements the refcount of the given BSS struct. */ void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_unlink_bss - unlink BSS from internal data structures * @wiphy: the wiphy * @bss: the bss to remove * * This function removes the given BSS from the internal data structures * thereby making it no longer show up in scan results etc. Use this * function when you detect a BSS is gone. Normally BSSes will also time * out, so it is not necessary to use this function at all. */ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_bss_iter - iterate all BSS entries * * This function iterates over the BSS entries associated with the given wiphy * and calls the callback for the iterated BSS. The iterator function is not * allowed to call functions that might modify the internal state of the BSS DB. * * @wiphy: the wiphy * @chandef: if given, the iterator function will be called only if the channel * of the currently iterated BSS is a subset of the given channel. * @iter: the iterator function to call * @iter_data: an argument to the iterator function */ void cfg80211_bss_iter(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, void (*iter)(struct wiphy *wiphy, struct cfg80211_bss *bss, void *data), void *iter_data); static inline enum nl80211_bss_scan_width cfg80211_chandef_to_scan_width(const struct cfg80211_chan_def *chandef) { switch (chandef->width) { case NL80211_CHAN_WIDTH_5: return NL80211_BSS_CHAN_WIDTH_5; case NL80211_CHAN_WIDTH_10: return NL80211_BSS_CHAN_WIDTH_10; default: return NL80211_BSS_CHAN_WIDTH_20; } } /** * cfg80211_rx_mlme_mgmt - notification of processed MLME management frame * @dev: network device * @buf: authentication frame (header + body) * @len: length of the frame data * * This function is called whenever an authentication, disassociation or * deauthentication frame has been received and processed in station mode. * After being asked to authenticate via cfg80211_ops::auth() the driver must * call either this function or cfg80211_auth_timeout(). * After being asked to associate via cfg80211_ops::assoc() the driver must * call either this function or cfg80211_auth_timeout(). * While connected, the driver must calls this for received and processed * disassociation and deauthentication frames. If the frame couldn't be used * because it was unprotected, the driver must call the function * cfg80211_rx_unprot_mlme_mgmt() instead. * * This function may sleep. The caller must hold the corresponding wdev's mutex. */ void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** * cfg80211_auth_timeout - notification of timed out authentication * @dev: network device * @addr: The MAC address of the device with which the authentication timed out * * This function may sleep. The caller must hold the corresponding wdev's * mutex. */ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); /** * cfg80211_rx_assoc_resp - notification of processed association response * @dev: network device * @bss: the BSS that association was requested with, ownership of the pointer * moves to cfg80211 in this call * @buf: (Re)Association Response frame (header + body) * @len: length of the frame data * @uapsd_queues: bitmap of queues configured for uapsd. Same format * as the AC bitmap in the QoS info field * @req_ies: information elements from the (Re)Association Request frame * @req_ies_len: length of req_ies data * * After being asked to associate via cfg80211_ops::assoc() the driver must * call either this function or cfg80211_auth_timeout(). * * This function may sleep. The caller must hold the corresponding wdev's mutex. */ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss, const u8 *buf, size_t len, int uapsd_queues, const u8 *req_ies, size_t req_ies_len); /** * cfg80211_assoc_timeout - notification of timed out association * @dev: network device * @bss: The BSS entry with which association timed out. * * This function may sleep. The caller must hold the corresponding wdev's mutex. */ void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss); /** * cfg80211_abandon_assoc - notify cfg80211 of abandoned association attempt * @dev: network device * @bss: The BSS entry with which association was abandoned. * * Call this whenever - for reasons reported through other API, like deauth RX, * an association attempt was abandoned. * This function may sleep. The caller must hold the corresponding wdev's mutex. */ void cfg80211_abandon_assoc(struct net_device *dev, struct cfg80211_bss *bss); /** * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame * @dev: network device * @buf: 802.11 frame (header + body) * @len: length of the frame data * * This function is called whenever deauthentication has been processed in * station mode. This includes both received deauthentication frames and * locally generated ones. This function may sleep. The caller must hold the * corresponding wdev's mutex. */ void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame * @dev: network device * @buf: received management frame (header + body) * @len: length of the frame data * * This function is called whenever a received deauthentication or dissassoc * frame has been dropped in station mode because of MFP being used but the * frame was not protected. This is also used to notify reception of a Beacon * frame that was dropped because it did not include a valid MME MIC while * beacon protection was enabled (BIGTK configured in station mode). * * This function may sleep. */ void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) * @dev: network device * @addr: The source MAC address of the frame * @key_type: The key type that the received frame used * @key_id: Key identifier (0..3). Can be -1 if missing. * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) * @gfp: allocation flags * * This function is called whenever the local MAC detects a MIC failure in a * received frame. This matches with MLME-MICHAELMICFAILURE.indication() * primitive. */ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, enum nl80211_key_type key_type, int key_id, const u8 *tsc, gfp_t gfp); /** * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS * * @dev: network device * @bssid: the BSSID of the IBSS joined * @channel: the channel of the IBSS joined * @gfp: allocation flags * * This function notifies cfg80211 that the device joined an IBSS or * switched to a different BSSID. Before this function can be called, * either a beacon has to have been received from the IBSS, or one of * the cfg80211_inform_bss{,_frame} functions must have been called * with the locally generated beacon -- this guarantees that there is * always a scan result for this IBSS. cfg80211 will handle the rest. */ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, struct ieee80211_channel *channel, gfp_t gfp); /** * cfg80211_notify_new_peer_candidate - notify cfg80211 of a new mesh peer * candidate * * @dev: network device * @macaddr: the MAC address of the new candidate * @ie: information elements advertised by the peer candidate * @ie_len: length of the information elements buffer * @gfp: allocation flags * * This function notifies cfg80211 that the mesh peer candidate has been * detected, most likely via a beacon or, less likely, via a probe response. * cfg80211 then sends a notification to userspace. */ void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *macaddr, const u8 *ie, u8 ie_len, int sig_dbm, gfp_t gfp); /** * DOC: RFkill integration * * RFkill integration in cfg80211 is almost invisible to drivers, * as cfg80211 automatically registers an rfkill instance for each * wireless device it knows about. Soft kill is also translated * into disconnecting and turning all interfaces off, drivers are * expected to turn off the device when all interfaces are down. * * However, devices may have a hard RFkill line, in which case they * also need to interact with the rfkill subsystem, via cfg80211. * They can do this with a few helper functions documented here. */ /** * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state * @wiphy: the wiphy * @blocked: block status */ void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); /** * wiphy_rfkill_start_polling - start polling rfkill * @wiphy: the wiphy */ void wiphy_rfkill_start_polling(struct wiphy *wiphy); /** * wiphy_rfkill_stop_polling - stop polling rfkill * @wiphy: the wiphy */ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); /** * DOC: Vendor commands * * Occasionally, there are special protocol or firmware features that * can't be implemented very openly. For this and similar cases, the * vendor command functionality allows implementing the features with * (typically closed-source) userspace and firmware, using nl80211 as * the configuration mechanism. * * A driver supporting vendor commands must register them as an array * in struct wiphy, with handlers for each one, each command has an * OUI and sub command ID to identify it. * * Note that this feature should not be (ab)used to implement protocol * features that could openly be shared across drivers. In particular, * it must never be required to use vendor commands to implement any * "normal" functionality that higher-level userspace like connection * managers etc. need. */ struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy, enum nl80211_commands cmd, enum nl80211_attrs attr, int approxlen); struct sk_buff *__cfg80211_alloc_event_skb(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_commands cmd, enum nl80211_attrs attr, unsigned int portid, int vendor_event_idx, int approxlen, gfp_t gfp); void __cfg80211_send_event_skb(struct sk_buff *skb, gfp_t gfp); /** * cfg80211_vendor_cmd_alloc_reply_skb - allocate vendor command reply * @wiphy: the wiphy * @approxlen: an upper bound of the length of the data that will * be put into the skb * * This function allocates and pre-fills an skb for a reply to * a vendor command. Since it is intended for a reply, calling * it outside of a vendor command's doit() operation is invalid. * * The returned skb is pre-filled with some identifying data in * a way that any data that is put into the skb (with skb_put(), * nla_put() or similar) will end up being within the * %NL80211_ATTR_VENDOR_DATA attribute, so all that needs to be done * with the skb is adding data for the corresponding userspace tool * which can then read that data out of the vendor data attribute. * You must not modify the skb in any other way. * * When done, call cfg80211_vendor_cmd_reply() with the skb and return * its error code as the result of the doit() operation. * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ static inline struct sk_buff * cfg80211_vendor_cmd_alloc_reply_skb(struct wiphy *wiphy, int approxlen) { return __cfg80211_alloc_reply_skb(wiphy, NL80211_CMD_VENDOR, NL80211_ATTR_VENDOR_DATA, approxlen); } /** * cfg80211_vendor_cmd_reply - send the reply skb * @skb: The skb, must have been allocated with * cfg80211_vendor_cmd_alloc_reply_skb() * * Since calling this function will usually be the last thing * before returning from the vendor command doit() you should * return the error code. Note that this function consumes the * skb regardless of the return value. * * Return: An error code or 0 on success. */ int cfg80211_vendor_cmd_reply(struct sk_buff *skb); /** * cfg80211_vendor_cmd_get_sender * @wiphy: the wiphy * * Return the current netlink port ID in a vendor command handler. * Valid to call only there. */ unsigned int cfg80211_vendor_cmd_get_sender(struct wiphy *wiphy); /** * cfg80211_vendor_event_alloc - allocate vendor-specific event skb * @wiphy: the wiphy * @wdev: the wireless device * @event_idx: index of the vendor event in the wiphy's vendor_events * @approxlen: an upper bound of the length of the data that will * be put into the skb * @gfp: allocation flags * * This function allocates and pre-fills an skb for an event on the * vendor-specific multicast group. * * If wdev != NULL, both the ifindex and identifier of the specified * wireless device are added to the event message before the vendor data * attribute. * * When done filling the skb, call cfg80211_vendor_event() with the * skb to send the event. * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ static inline struct sk_buff * cfg80211_vendor_event_alloc(struct wiphy *wiphy, struct wireless_dev *wdev, int approxlen, int event_idx, gfp_t gfp) { return __cfg80211_alloc_event_skb(wiphy, wdev, NL80211_CMD_VENDOR, NL80211_ATTR_VENDOR_DATA, 0, event_idx, approxlen, gfp); } /** * cfg80211_vendor_event_alloc_ucast - alloc unicast vendor-specific event skb * @wiphy: the wiphy * @wdev: the wireless device * @event_idx: index of the vendor event in the wiphy's vendor_events * @portid: port ID of the receiver * @approxlen: an upper bound of the length of the data that will * be put into the skb * @gfp: allocation flags * * This function allocates and pre-fills an skb for an event to send to * a specific (userland) socket. This socket would previously have been * obtained by cfg80211_vendor_cmd_get_sender(), and the caller MUST take * care to register a netlink notifier to see when the socket closes. * * If wdev != NULL, both the ifindex and identifier of the specified * wireless device are added to the event message before the vendor data * attribute. * * When done filling the skb, call cfg80211_vendor_event() with the * skb to send the event. * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ static inline struct sk_buff * cfg80211_vendor_event_alloc_ucast(struct wiphy *wiphy, struct wireless_dev *wdev, unsigned int portid, int approxlen, int event_idx, gfp_t gfp) { return __cfg80211_alloc_event_skb(wiphy, wdev, NL80211_CMD_VENDOR, NL80211_ATTR_VENDOR_DATA, portid, event_idx, approxlen, gfp); } /** * cfg80211_vendor_event - send the event * @skb: The skb, must have been allocated with cfg80211_vendor_event_alloc() * @gfp: allocation flags * * This function sends the given @skb, which must have been allocated * by cfg80211_vendor_event_alloc(), as an event. It always consumes it. */ static inline void cfg80211_vendor_event(struct sk_buff *skb, gfp_t gfp) { __cfg80211_send_event_skb(skb, gfp); } #ifdef CONFIG_NL80211_TESTMODE /** * DOC: Test mode * * Test mode is a set of utility functions to allow drivers to * interact with driver-specific tools to aid, for instance, * factory programming. * * This chapter describes how drivers interact with it, for more * information see the nl80211 book's chapter on it. */ /** * cfg80211_testmode_alloc_reply_skb - allocate testmode reply * @wiphy: the wiphy * @approxlen: an upper bound of the length of the data that will * be put into the skb * * This function allocates and pre-fills an skb for a reply to * the testmode command. Since it is intended for a reply, calling * it outside of the @testmode_cmd operation is invalid. * * The returned skb is pre-filled with the wiphy index and set up in * a way that any data that is put into the skb (with skb_put(), * nla_put() or similar) will end up being within the * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done * with the skb is adding data for the corresponding userspace tool * which can then read that data out of the testdata attribute. You * must not modify the skb in any other way. * * When done, call cfg80211_testmode_reply() with the skb and return * its error code as the result of the @testmode_cmd operation. * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ static inline struct sk_buff * cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen) { return __cfg80211_alloc_reply_skb(wiphy, NL80211_CMD_TESTMODE, NL80211_ATTR_TESTDATA, approxlen); } /** * cfg80211_testmode_reply - send the reply skb * @skb: The skb, must have been allocated with * cfg80211_testmode_alloc_reply_skb() * * Since calling this function will usually be the last thing * before returning from the @testmode_cmd you should return * the error code. Note that this function consumes the skb * regardless of the return value. * * Return: An error code or 0 on success. */ static inline int cfg80211_testmode_reply(struct sk_buff *skb) { return cfg80211_vendor_cmd_reply(skb); } /** * cfg80211_testmode_alloc_event_skb - allocate testmode event * @wiphy: the wiphy * @approxlen: an upper bound of the length of the data that will * be put into the skb * @gfp: allocation flags * * This function allocates and pre-fills an skb for an event on the * testmode multicast group. * * The returned skb is set up in the same way as with * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As * there, you should simply add data to it that will then end up in the * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb * in any other way. * * When done filling the skb, call cfg80211_testmode_event() with the * skb to send the event. * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ static inline struct sk_buff * cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp) { return __cfg80211_alloc_event_skb(wiphy, NULL, NL80211_CMD_TESTMODE, NL80211_ATTR_TESTDATA, 0, -1, approxlen, gfp); } /** * cfg80211_testmode_event - send the event * @skb: The skb, must have been allocated with * cfg80211_testmode_alloc_event_skb() * @gfp: allocation flags * * This function sends the given @skb, which must have been allocated * by cfg80211_testmode_alloc_event_skb(), as an event. It always * consumes it. */ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) { __cfg80211_send_event_skb(skb, gfp); } #define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), #define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd), #else #define CFG80211_TESTMODE_CMD(cmd) #define CFG80211_TESTMODE_DUMP(cmd) #endif /** * struct cfg80211_fils_resp_params - FILS connection response params * @kek: KEK derived from a successful FILS connection (may be %NULL) * @kek_len: Length of @fils_kek in octets * @update_erp_next_seq_num: Boolean value to specify whether the value in * @erp_next_seq_num is valid. * @erp_next_seq_num: The next sequence number to use in ERP message in * FILS Authentication. This value should be specified irrespective of the * status for a FILS connection. * @pmk: A new PMK if derived from a successful FILS connection (may be %NULL). * @pmk_len: Length of @pmk in octets * @pmkid: A new PMKID if derived from a successful FILS connection or the PMKID * used for this FILS connection (may be %NULL). */ struct cfg80211_fils_resp_params { const u8 *kek; size_t kek_len; bool update_erp_next_seq_num; u16 erp_next_seq_num; const u8 *pmk; size_t pmk_len; const u8 *pmkid; }; /** * struct cfg80211_connect_resp_params - Connection response params * @status: Status code, %WLAN_STATUS_SUCCESS for successful connection, use * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you * the real status code for failures. If this call is used to report a * failure due to a timeout (e.g., not receiving an Authentication frame * from the AP) instead of an explicit rejection by the AP, -1 is used to * indicate that this is a failure, but without a status code. * @timeout_reason is used to report the reason for the timeout in that * case. * @bssid: The BSSID of the AP (may be %NULL) * @bss: Entry of bss to which STA got connected to, can be obtained through * cfg80211_get_bss() (may be %NULL). But it is recommended to store the * bss from the connect_request and hold a reference to it and return * through this param to avoid a warning if the bss is expired during the * connection, esp. for those drivers implementing connect op. * Only one parameter among @bssid and @bss needs to be specified. * @req_ie: Association request IEs (may be %NULL) * @req_ie_len: Association request IEs length * @resp_ie: Association response IEs (may be %NULL) * @resp_ie_len: Association response IEs length * @fils: FILS connection response parameters. * @timeout_reason: Reason for connection timeout. This is used when the * connection fails due to a timeout instead of an explicit rejection from * the AP. %NL80211_TIMEOUT_UNSPECIFIED is used when the timeout reason is * not known. This value is used only if @status < 0 to indicate that the * failure is due to a timeout and not due to explicit rejection by the AP. * This value is ignored in other cases (@status >= 0). */ struct cfg80211_connect_resp_params { int status; const u8 *bssid; struct cfg80211_bss *bss; const u8 *req_ie; size_t req_ie_len; const u8 *resp_ie; size_t resp_ie_len; struct cfg80211_fils_resp_params fils; enum nl80211_timeout_reason timeout_reason; }; /** * cfg80211_connect_done - notify cfg80211 of connection result * * @dev: network device * @params: connection response parameters * @gfp: allocation flags * * It should be called by the underlying driver once execution of the connection * request from connect() has been completed. This is similar to * cfg80211_connect_bss(), but takes a structure pointer for connection response * parameters. Only one of the functions among cfg80211_connect_bss(), * cfg80211_connect_result(), cfg80211_connect_timeout(), * and cfg80211_connect_done() should be called. */ void cfg80211_connect_done(struct net_device *dev, struct cfg80211_connect_resp_params *params, gfp_t gfp); /** * cfg80211_connect_bss - notify cfg80211 of connection result * * @dev: network device * @bssid: the BSSID of the AP * @bss: Entry of bss to which STA got connected to, can be obtained through * cfg80211_get_bss() (may be %NULL). But it is recommended to store the * bss from the connect_request and hold a reference to it and return * through this param to avoid a warning if the bss is expired during the * connection, esp. for those drivers implementing connect op. * Only one parameter among @bssid and @bss needs to be specified. * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length * @status: status code, %WLAN_STATUS_SUCCESS for successful connection, use * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you * the real status code for failures. If this call is used to report a * failure due to a timeout (e.g., not receiving an Authentication frame * from the AP) instead of an explicit rejection by the AP, -1 is used to * indicate that this is a failure, but without a status code. * @timeout_reason is used to report the reason for the timeout in that * case. * @gfp: allocation flags * @timeout_reason: reason for connection timeout. This is used when the * connection fails due to a timeout instead of an explicit rejection from * the AP. %NL80211_TIMEOUT_UNSPECIFIED is used when the timeout reason is * not known. This value is used only if @status < 0 to indicate that the * failure is due to a timeout and not due to explicit rejection by the AP. * This value is ignored in other cases (@status >= 0). * * It should be called by the underlying driver once execution of the connection * request from connect() has been completed. This is similar to * cfg80211_connect_result(), but with the option of identifying the exact bss * entry for the connection. Only one of the functions among * cfg80211_connect_bss(), cfg80211_connect_result(), * cfg80211_connect_timeout(), and cfg80211_connect_done() should be called. */ static inline void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, struct cfg80211_bss *bss, const u8 *req_ie, size_t req_ie_len, const u8 *resp_ie, size_t resp_ie_len, int status, gfp_t gfp, enum nl80211_timeout_reason timeout_reason) { struct cfg80211_connect_resp_params params; memset(&params, 0, sizeof(params)); params.status = status; params.bssid = bssid; params.bss = bss; params.req_ie = req_ie; params.req_ie_len = req_ie_len; params.resp_ie = resp_ie; params.resp_ie_len = resp_ie_len; params.timeout_reason = timeout_reason; cfg80211_connect_done(dev, &params, gfp); } /** * cfg80211_connect_result - notify cfg80211 of connection result * * @dev: network device * @bssid: the BSSID of the AP * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length * @status: status code, %WLAN_STATUS_SUCCESS for successful connection, use * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you * the real status code for failures. * @gfp: allocation flags * * It should be called by the underlying driver once execution of the connection * request from connect() has been completed. This is similar to * cfg80211_connect_bss() which allows the exact bss entry to be specified. Only * one of the functions among cfg80211_connect_bss(), cfg80211_connect_result(), * cfg80211_connect_timeout(), and cfg80211_connect_done() should be called. */ static inline void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, const u8 *req_ie, size_t req_ie_len, const u8 *resp_ie, size_t resp_ie_len, u16 status, gfp_t gfp) { cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, resp_ie, resp_ie_len, status, gfp, NL80211_TIMEOUT_UNSPECIFIED); } /** * cfg80211_connect_timeout - notify cfg80211 of connection timeout * * @dev: network device * @bssid: the BSSID of the AP * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @gfp: allocation flags * @timeout_reason: reason for connection timeout. * * It should be called by the underlying driver whenever connect() has failed * in a sequence where no explicit authentication/association rejection was * received from the AP. This could happen, e.g., due to not being able to send * out the Authentication or Association Request frame or timing out while * waiting for the response. Only one of the functions among * cfg80211_connect_bss(), cfg80211_connect_result(), * cfg80211_connect_timeout(), and cfg80211_connect_done() should be called. */ static inline void cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, const u8 *req_ie, size_t req_ie_len, gfp_t gfp, enum nl80211_timeout_reason timeout_reason) { cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, NULL, 0, -1, gfp, timeout_reason); } /** * struct cfg80211_roam_info - driver initiated roaming information * * @channel: the channel of the new AP * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set) * @bssid: the BSSID of the new AP (may be %NULL if %bss is set) * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length * @fils: FILS related roaming information. */ struct cfg80211_roam_info { struct ieee80211_channel *channel; struct cfg80211_bss *bss; const u8 *bssid; const u8 *req_ie; size_t req_ie_len; const u8 *resp_ie; size_t resp_ie_len; struct cfg80211_fils_resp_params fils; }; /** * cfg80211_roamed - notify cfg80211 of roaming * * @dev: network device * @info: information about the new BSS. struct &cfg80211_roam_info. * @gfp: allocation flags * * This function may be called with the driver passing either the BSSID of the * new AP or passing the bss entry to avoid a race in timeout of the bss entry. * It should be called by the underlying driver whenever it roamed from one AP * to another while connected. Drivers which have roaming implemented in * firmware should pass the bss entry to avoid a race in bss entry timeout where * the bss entry of the new AP is seen in the driver, but gets timed out by the * time it is accessed in __cfg80211_roamed() due to delay in scheduling * rdev->event_work. In case of any failures, the reference is released * either in cfg80211_roamed() or in __cfg80211_romed(), Otherwise, it will be * released while disconnecting from the current bss. */ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info, gfp_t gfp); /** * cfg80211_port_authorized - notify cfg80211 of successful security association * * @dev: network device * @bssid: the BSSID of the AP * @gfp: allocation flags * * This function should be called by a driver that supports 4 way handshake * offload after a security association was successfully established (i.e., * the 4 way handshake was completed successfully). The call to this function * should be preceded with a call to cfg80211_connect_result(), * cfg80211_connect_done(), cfg80211_connect_bss() or cfg80211_roamed() to * indicate the 802.11 association. */ void cfg80211_port_authorized(struct net_device *dev, const u8 *bssid, gfp_t gfp); /** * cfg80211_disconnected - notify cfg80211 that connection was dropped * * @dev: network device * @ie: information elements of the deauth/disassoc frame (may be %NULL) * @ie_len: length of IEs * @reason: reason code for the disconnection, set it to 0 if unknown * @locally_generated: disconnection was requested locally * @gfp: allocation flags * * After it calls this function, the driver should enter an idle state * and not try to connect to any AP any more. */ void cfg80211_disconnected(struct net_device *dev, u16 reason, const u8 *ie, size_t ie_len, bool locally_generated, gfp_t gfp); /** * cfg80211_ready_on_channel - notification of remain_on_channel start * @wdev: wireless device * @cookie: the request cookie * @chan: The current channel (from remain_on_channel request) * @duration: Duration in milliseconds that the driver intents to remain on the * channel * @gfp: allocation flags */ void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, unsigned int duration, gfp_t gfp); /** * cfg80211_remain_on_channel_expired - remain_on_channel duration expired * @wdev: wireless device * @cookie: the request cookie * @chan: The current channel (from remain_on_channel request) * @gfp: allocation flags */ void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, gfp_t gfp); /** * cfg80211_tx_mgmt_expired - tx_mgmt duration expired * @wdev: wireless device * @cookie: the requested cookie * @chan: The current channel (from tx_mgmt request) * @gfp: allocation flags */ void cfg80211_tx_mgmt_expired(struct wireless_dev *wdev, u64 cookie, struct ieee80211_channel *chan, gfp_t gfp); /** * cfg80211_sinfo_alloc_tid_stats - allocate per-tid statistics. * * @sinfo: the station information * @gfp: allocation flags */ int cfg80211_sinfo_alloc_tid_stats(struct station_info *sinfo, gfp_t gfp); /** * cfg80211_sinfo_release_content - release contents of station info * @sinfo: the station information * * Releases any potentially allocated sub-information of the station * information, but not the struct itself (since it's typically on * the stack.) */ static inline void cfg80211_sinfo_release_content(struct station_info *sinfo) { kfree(sinfo->pertid); } /** * cfg80211_new_sta - notify userspace about station * * @dev: the netdev * @mac_addr: the station's address * @sinfo: the station information * @gfp: allocation flags */ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, struct station_info *sinfo, gfp_t gfp); /** * cfg80211_del_sta_sinfo - notify userspace about deletion of a station * @dev: the netdev * @mac_addr: the station's address * @sinfo: the station information/statistics * @gfp: allocation flags */ void cfg80211_del_sta_sinfo(struct net_device *dev, const u8 *mac_addr, struct station_info *sinfo, gfp_t gfp); /** * cfg80211_del_sta - notify userspace about deletion of a station * * @dev: the netdev * @mac_addr: the station's address * @gfp: allocation flags */ static inline void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp) { cfg80211_del_sta_sinfo(dev, mac_addr, NULL, gfp); } /** * cfg80211_conn_failed - connection request failed notification * * @dev: the netdev * @mac_addr: the station's address * @reason: the reason for connection failure * @gfp: allocation flags * * Whenever a station tries to connect to an AP and if the station * could not connect to the AP as the AP has rejected the connection * for some reasons, this function is called. * * The reason for connection failure can be any of the value from * nl80211_connect_failed_reason enum */ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, enum nl80211_connect_failed_reason reason, gfp_t gfp); /** * cfg80211_rx_mgmt_khz - notification of received, unprocessed management frame * @wdev: wireless device receiving the frame * @freq: Frequency on which the frame was received in KHz * @sig_dbm: signal strength in dBm, or 0 if unknown * @buf: Management frame (header + body) * @len: length of the frame data * @flags: flags, as defined in enum nl80211_rxmgmt_flags * * This function is called whenever an Action frame is received for a station * mode interface, but is not processed in kernel. * * Return: %true if a user space application has registered for this frame. * For action frames, that makes it responsible for rejecting unrecognized * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. */ bool cfg80211_rx_mgmt_khz(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, u32 flags); /** * cfg80211_rx_mgmt - notification of received, unprocessed management frame * @wdev: wireless device receiving the frame * @freq: Frequency on which the frame was received in MHz * @sig_dbm: signal strength in dBm, or 0 if unknown * @buf: Management frame (header + body) * @len: length of the frame data * @flags: flags, as defined in enum nl80211_rxmgmt_flags * * This function is called whenever an Action frame is received for a station * mode interface, but is not processed in kernel. * * Return: %true if a user space application has registered for this frame. * For action frames, that makes it responsible for rejecting unrecognized * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. */ static inline bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, u32 flags) { return cfg80211_rx_mgmt_khz(wdev, MHZ_TO_KHZ(freq), sig_dbm, buf, len, flags); } /** * cfg80211_mgmt_tx_status - notification of TX status for management frame * @wdev: wireless device receiving the frame * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() * @buf: Management frame (header + body) * @len: length of the frame data * @ack: Whether frame was acknowledged * @gfp: context flags * * This function is called whenever a management frame was requested to be * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the * transmission attempt. */ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, const u8 *buf, size_t len, bool ack, gfp_t gfp); /** * cfg80211_control_port_tx_status - notification of TX status for control * port frames * @wdev: wireless device receiving the frame * @cookie: Cookie returned by cfg80211_ops::tx_control_port() * @buf: Data frame (header + body) * @len: length of the frame data * @ack: Whether frame was acknowledged * @gfp: context flags * * This function is called whenever a control port frame was requested to be * transmitted with cfg80211_ops::tx_control_port() to report the TX status of * the transmission attempt. */ void cfg80211_control_port_tx_status(struct wireless_dev *wdev, u64 cookie, const u8 *buf, size_t len, bool ack, gfp_t gfp); /** * cfg80211_rx_control_port - notification about a received control port frame * @dev: The device the frame matched to * @skb: The skbuf with the control port frame. It is assumed that the skbuf * is 802.3 formatted (with 802.3 header). The skb can be non-linear. * This function does not take ownership of the skb, so the caller is * responsible for any cleanup. The caller must also ensure that * skb->protocol is set appropriately. * @unencrypted: Whether the frame was received unencrypted * * This function is used to inform userspace about a received control port * frame. It should only be used if userspace indicated it wants to receive * control port frames over nl80211. * * The frame is the data portion of the 802.3 or 802.11 data frame with all * network layer headers removed (e.g. the raw EAPoL frame). * * Return: %true if the frame was passed to userspace */ bool cfg80211_rx_control_port(struct net_device *dev, struct sk_buff *skb, bool unencrypted); /** * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event * @dev: network device * @rssi_event: the triggered RSSI event * @rssi_level: new RSSI level value or 0 if not available * @gfp: context flags * * This function is called when a configured connection quality monitoring * rssi threshold reached event occurs. */ void cfg80211_cqm_rssi_notify(struct net_device *dev, enum nl80211_cqm_rssi_threshold_event rssi_event, s32 rssi_level, gfp_t gfp); /** * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer * @dev: network device * @peer: peer's MAC address * @num_packets: how many packets were lost -- should be a fixed threshold * but probably no less than maybe 50, or maybe a throughput dependent * threshold (to account for temporary interference) * @gfp: context flags */ void cfg80211_cqm_pktloss_notify(struct net_device *dev, const u8 *peer, u32 num_packets, gfp_t gfp); /** * cfg80211_cqm_txe_notify - TX error rate event * @dev: network device * @peer: peer's MAC address * @num_packets: how many packets were lost * @rate: % of packets which failed transmission * @intvl: interval (in s) over which the TX failure threshold was breached. * @gfp: context flags * * Notify userspace when configured % TX failures over number of packets in a * given interval is exceeded. */ void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer, u32 num_packets, u32 rate, u32 intvl, gfp_t gfp); /** * cfg80211_cqm_beacon_loss_notify - beacon loss event * @dev: network device * @gfp: context flags * * Notify userspace about beacon loss from the connected AP. */ void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp); /** * cfg80211_radar_event - radar detection event * @wiphy: the wiphy * @chandef: chandef for the current channel * @gfp: context flags * * This function is called when a radar is detected on the current chanenl. */ void cfg80211_radar_event(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, gfp_t gfp); /** * cfg80211_sta_opmode_change_notify - STA's ht/vht operation mode change event * @dev: network device * @mac: MAC address of a station which opmode got modified * @sta_opmode: station's current opmode value * @gfp: context flags * * Driver should call this function when station's opmode modified via action * frame. */ void cfg80211_sta_opmode_change_notify(struct net_device *dev, const u8 *mac, struct sta_opmode_info *sta_opmode, gfp_t gfp); /** * cfg80211_cac_event - Channel availability check (CAC) event * @netdev: network device * @chandef: chandef for the current channel * @event: type of event * @gfp: context flags * * This function is called when a Channel availability check (CAC) is finished * or aborted. This must be called to notify the completion of a CAC process, * also by full-MAC drivers. */ void cfg80211_cac_event(struct net_device *netdev, const struct cfg80211_chan_def *chandef, enum nl80211_radar_event event, gfp_t gfp); /** * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying * @dev: network device * @bssid: BSSID of AP (to avoid races) * @replay_ctr: new replay counter * @gfp: allocation flags */ void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid, const u8 *replay_ctr, gfp_t gfp); /** * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate * @dev: network device * @index: candidate index (the smaller the index, the higher the priority) * @bssid: BSSID of AP * @preauth: Whether AP advertises support for RSN pre-authentication * @gfp: allocation flags */ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, const u8 *bssid, bool preauth, gfp_t gfp); /** * cfg80211_rx_spurious_frame - inform userspace about a spurious frame * @dev: The device the frame matched to * @addr: the transmitter address * @gfp: context flags * * This function is used in AP mode (only!) to inform userspace that * a spurious class 3 frame was received, to be able to deauth the * sender. * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_spurious_frame(struct net_device *dev, const u8 *addr, gfp_t gfp); /** * cfg80211_rx_unexpected_4addr_frame - inform about unexpected WDS frame * @dev: The device the frame matched to * @addr: the transmitter address * @gfp: context flags * * This function is used in AP mode (only!) to inform userspace that * an associated station sent a 4addr frame but that wasn't expected. * It is allowed and desirable to send this event only once for each * station to avoid event flooding. * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, const u8 *addr, gfp_t gfp); /** * cfg80211_probe_status - notify userspace about probe status * @dev: the device the probe was sent on * @addr: the address of the peer * @cookie: the cookie filled in @probe_client previously * @acked: indicates whether probe was acked or not * @ack_signal: signal strength (in dBm) of the ACK frame. * @is_valid_ack_signal: indicates the ack_signal is valid or not. * @gfp: allocation flags */ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, u64 cookie, bool acked, s32 ack_signal, bool is_valid_ack_signal, gfp_t gfp); /** * cfg80211_report_obss_beacon_khz - report beacon from other APs * @wiphy: The wiphy that received the beacon * @frame: the frame * @len: length of the frame * @freq: frequency the frame was received on in KHz * @sig_dbm: signal strength in dBm, or 0 if unknown * * Use this function to report to userspace when a beacon was * received. It is not useful to call this when there is no * netdev that is in AP/GO mode. */ void cfg80211_report_obss_beacon_khz(struct wiphy *wiphy, const u8 *frame, size_t len, int freq, int sig_dbm); /** * cfg80211_report_obss_beacon - report beacon from other APs * @wiphy: The wiphy that received the beacon * @frame: the frame * @len: length of the frame * @freq: frequency the frame was received on * @sig_dbm: signal strength in dBm, or 0 if unknown * * Use this function to report to userspace when a beacon was * received. It is not useful to call this when there is no * netdev that is in AP/GO mode. */ static inline void cfg80211_report_obss_beacon(struct wiphy *wiphy, const u8 *frame, size_t len, int freq, int sig_dbm) { cfg80211_report_obss_beacon_khz(wiphy, frame, len, MHZ_TO_KHZ(freq), sig_dbm); } /** * cfg80211_reg_can_beacon - check if beaconing is allowed * @wiphy: the wiphy * @chandef: the channel definition * @iftype: interface type * * Return: %true if there is no secondary channel or the secondary channel(s) * can be used for beaconing (i.e. is not a radar channel etc.) */ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, enum nl80211_iftype iftype); /** * cfg80211_reg_can_beacon_relax - check if beaconing is allowed with relaxation * @wiphy: the wiphy * @chandef: the channel definition * @iftype: interface type * * Return: %true if there is no secondary channel or the secondary channel(s) * can be used for beaconing (i.e. is not a radar channel etc.). This version * also checks if IR-relaxation conditions apply, to allow beaconing under * more permissive conditions. * * Requires the RTNL to be held. */ bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, enum nl80211_iftype iftype); /* * cfg80211_ch_switch_notify - update wdev channel and notify userspace * @dev: the device which switched channels * @chandef: the new channel definition * * Caller must acquire wdev_lock, therefore must only be called from sleepable * driver context! */ void cfg80211_ch_switch_notify(struct net_device *dev, struct cfg80211_chan_def *chandef); /* * cfg80211_ch_switch_started_notify - notify channel switch start * @dev: the device on which the channel switch started * @chandef: the future channel definition * @count: the number of TBTTs until the channel switch happens * * Inform the userspace about the channel switch that has just * started, so that it can take appropriate actions (eg. starting * channel switch on other vifs), if necessary. */ void cfg80211_ch_switch_started_notify(struct net_device *dev, struct cfg80211_chan_def *chandef, u8 count); /** * ieee80211_operating_class_to_band - convert operating class to band * * @operating_class: the operating class to convert * @band: band pointer to fill * * Returns %true if the conversion was successful, %false otherwise. */ bool ieee80211_operating_class_to_band(u8 operating_class, enum nl80211_band *band); /** * ieee80211_chandef_to_operating_class - convert chandef to operation class * * @chandef: the chandef to convert * @op_class: a pointer to the resulting operating class * * Returns %true if the conversion was successful, %false otherwise. */ bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef, u8 *op_class); /** * ieee80211_chandef_to_khz - convert chandef to frequency in KHz * * @chandef: the chandef to convert * * Returns the center frequency of chandef (1st segment) in KHz. */ static inline u32 ieee80211_chandef_to_khz(const struct cfg80211_chan_def *chandef) { return MHZ_TO_KHZ(chandef->center_freq1) + chandef->freq1_offset; } /* * cfg80211_tdls_oper_request - request userspace to perform TDLS operation * @dev: the device on which the operation is requested * @peer: the MAC address of the peer device * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or * NL80211_TDLS_TEARDOWN) * @reason_code: the reason code for teardown request * @gfp: allocation flags * * This function is used to request userspace to perform TDLS operation that * requires knowledge of keys, i.e., link setup or teardown when the AP * connection uses encryption. This is optional mechanism for the driver to use * if it can automatically determine when a TDLS link could be useful (e.g., * based on traffic and signal strength for a peer). */ void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper, u16 reason_code, gfp_t gfp); /* * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units) * @rate: given rate_info to calculate bitrate from * * return 0 if MCS index >= 32 */ u32 cfg80211_calculate_bitrate(struct rate_info *rate); /** * cfg80211_unregister_wdev - remove the given wdev * @wdev: struct wireless_dev to remove * * Call this function only for wdevs that have no netdev assigned, * e.g. P2P Devices. It removes the device from the list so that * it can no longer be used. It is necessary to call this function * even when cfg80211 requests the removal of the interface by * calling the del_virtual_intf() callback. The function must also * be called when the driver wishes to unregister the wdev, e.g. * when the device is unbound from the driver. * * Requires the RTNL to be held. */ void cfg80211_unregister_wdev(struct wireless_dev *wdev); /** * struct cfg80211_ft_event_params - FT Information Elements * @ies: FT IEs * @ies_len: length of the FT IE in bytes * @target_ap: target AP's MAC address * @ric_ies: RIC IE * @ric_ies_len: length of the RIC IE in bytes */ struct cfg80211_ft_event_params { const u8 *ies; size_t ies_len; const u8 *target_ap; const u8 *ric_ies; size_t ric_ies_len; }; /** * cfg80211_ft_event - notify userspace about FT IE and RIC IE * @netdev: network device * @ft_event: IE information */ void cfg80211_ft_event(struct net_device *netdev, struct cfg80211_ft_event_params *ft_event); /** * cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer * @ies: the input IE buffer * @len: the input length * @attr: the attribute ID to find * @buf: output buffer, can be %NULL if the data isn't needed, e.g. * if the function is only called to get the needed buffer size * @bufsize: size of the output buffer * * The function finds a given P2P attribute in the (vendor) IEs and * copies its contents to the given buffer. * * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is * malformed or the attribute can't be found (respectively), or the * length of the found attribute (which can be zero). */ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, u8 *buf, unsigned int bufsize); /** * ieee80211_ie_split_ric - split an IE buffer according to ordering (with RIC) * @ies: the IE buffer * @ielen: the length of the IE buffer * @ids: an array with element IDs that are allowed before * the split. A WLAN_EID_EXTENSION value means that the next * EID in the list is a sub-element of the EXTENSION IE. * @n_ids: the size of the element ID array * @after_ric: array IE types that come after the RIC element * @n_after_ric: size of the @after_ric array * @offset: offset where to start splitting in the buffer * * This function splits an IE buffer by updating the @offset * variable to point to the location where the buffer should be * split. * * It assumes that the given IE buffer is well-formed, this * has to be guaranteed by the caller! * * It also assumes that the IEs in the buffer are ordered * correctly, if not the result of using this function will not * be ordered correctly either, i.e. it does no reordering. * * The function returns the offset where the next part of the * buffer starts, which may be @ielen if the entire (remainder) * of the buffer should be used. */ size_t ieee80211_ie_split_ric(const u8 *ies, size_t ielen, const u8 *ids, int n_ids, const u8 *after_ric, int n_after_ric, size_t offset); /** * ieee80211_ie_split - split an