1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 /* SPDX-License-Identifier: GPL-2.0-only */ /* * This file is part of the Linux kernel. * * Copyright (c) 2011-2014, Intel Corporation * Authors: Fenghua Yu <fenghua.yu@intel.com>, * H. Peter Anvin <hpa@linux.intel.com> */ #ifndef ASM_X86_ARCHRANDOM_H #define ASM_X86_ARCHRANDOM_H #include <asm/processor.h> #include <asm/cpufeature.h> #define RDRAND_RETRY_LOOPS 10 /* Unconditional execution of RDRAND and RDSEED */ static inline bool __must_check rdrand_long(unsigned long *v) { bool ok; unsigned int retry = RDRAND_RETRY_LOOPS; do { asm volatile("rdrand %[out]" CC_SET(c) : CC_OUT(c) (ok), [out] "=r" (*v)); if (ok) return true; } while (--retry); return false; } static inline bool __must_check rdrand_int(unsigned int *v) { bool ok; unsigned int retry = RDRAND_RETRY_LOOPS; do { asm volatile("rdrand %[out]" CC_SET(c) : CC_OUT(c) (ok), [out] "=r" (*v)); if (ok) return true; } while (--retry); return false; } static inline bool __must_check rdseed_long(unsigned long *v) { bool ok; asm volatile("rdseed %[out]" CC_SET(c) : CC_OUT(c) (ok), [out] "=r" (*v)); return ok; } static inline bool __must_check rdseed_int(unsigned int *v) { bool ok; asm volatile("rdseed %[out]" CC_SET(c) : CC_OUT(c) (ok), [out] "=r" (*v)); return ok; } /* * These are the generic interfaces; they must not be declared if the * stubs in <linux/random.h> are to be invoked, * i.e. CONFIG_ARCH_RANDOM is not defined. */ #ifdef CONFIG_ARCH_RANDOM static inline bool __must_check arch_get_random_long(unsigned long *v) { return static_cpu_has(X86_FEATURE_RDRAND) ? rdrand_long(v) : false; } static inline bool __must_check arch_get_random_int(unsigned int *v) { return static_cpu_has(X86_FEATURE_RDRAND) ? rdrand_int(v) : false; } static inline bool __must_check arch_get_random_seed_long(unsigned long *v) { return static_cpu_has(X86_FEATURE_RDSEED) ? rdseed_long(v) : false; } static inline bool __must_check arch_get_random_seed_int(unsigned int *v) { return static_cpu_has(X86_FEATURE_RDSEED) ? rdseed_int(v) : false; } extern void x86_init_rdrand(struct cpuinfo_x86 *c); #else /* !CONFIG_ARCH_RANDOM */ static inline void x86_init_rdrand(struct cpuinfo_x86 *c) { } #endif /* !CONFIG_ARCH_RANDOM */ #endif /* ASM_X86_ARCHRANDOM_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2003-2004 Red Hat, Inc. All rights reserved. * Copyright 2003-2004 Jeff Garzik * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/driver-api/libata.rst * * Hardware documentation available from http://www.t13.org/ */ #ifndef __LINUX_ATA_H__ #define __LINUX_ATA_H__ #include <linux/kernel.h> #include <linux/string.h> #include <linux/types.h> #include <asm/byteorder.h> /* defines only for the constants which don't work well as enums */ #define ATA_DMA_BOUNDARY 0xffffUL #define ATA_DMA_MASK 0xffffffffULL enum { /* various global constants */ ATA_MAX_DEVICES = 2, /* per bus/port */ ATA_MAX_PRD = 256, /* we could make these 256/256 */ ATA_SECT_SIZE = 512, ATA_MAX_SECTORS_128 = 128, ATA_MAX_SECTORS = 256, ATA_MAX_SECTORS_1024 = 1024, ATA_MAX_SECTORS_LBA48 = 65535,/* avoid count to be 0000h */ ATA_MAX_SECTORS_TAPE = 65535, ATA_MAX_TRIM_RNUM = 64, /* 512-byte payload / (6-byte LBA + 2-byte range per entry) */ ATA_ID_WORDS = 256, ATA_ID_CONFIG = 0, ATA_ID_CYLS = 1, ATA_ID_HEADS = 3, ATA_ID_SECTORS = 6, ATA_ID_SERNO = 10, ATA_ID_BUF_SIZE = 21, ATA_ID_FW_REV = 23, ATA_ID_PROD = 27, ATA_ID_MAX_MULTSECT = 47, ATA_ID_DWORD_IO = 48, /* before ATA-8 */ ATA_ID_TRUSTED = 48, /* ATA-8 and later */ ATA_ID_CAPABILITY = 49, ATA_ID_OLD_PIO_MODES = 51, ATA_ID_OLD_DMA_MODES = 52, ATA_ID_FIELD_VALID = 53, ATA_ID_CUR_CYLS = 54, ATA_ID_CUR_HEADS = 55, ATA_ID_CUR_SECTORS = 56, ATA_ID_MULTSECT = 59, ATA_ID_LBA_CAPACITY = 60, ATA_ID_SWDMA_MODES = 62, ATA_ID_MWDMA_MODES = 63, ATA_ID_PIO_MODES = 64, ATA_ID_EIDE_DMA_MIN = 65, ATA_ID_EIDE_DMA_TIME = 66, ATA_ID_EIDE_PIO = 67, ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_ADDITIONAL_SUPP = 69, ATA_ID_QUEUE_DEPTH = 75, ATA_ID_SATA_CAPABILITY = 76, ATA_ID_SATA_CAPABILITY_2 = 77, ATA_ID_FEATURE_SUPP = 78, ATA_ID_MAJOR_VER = 80, ATA_ID_COMMAND_SET_1 = 82, ATA_ID_COMMAND_SET_2 = 83, ATA_ID_CFSSE = 84, ATA_ID_CFS_ENABLE_1 = 85, ATA_ID_CFS_ENABLE_2 = 86, ATA_ID_CSF_DEFAULT = 87, ATA_ID_UDMA_MODES = 88, ATA_ID_HW_CONFIG = 93, ATA_ID_SPG = 98, ATA_ID_LBA_CAPACITY_2 = 100, ATA_ID_SECTOR_SIZE = 106, ATA_ID_WWN = 108, ATA_ID_LOGICAL_SECTOR_SIZE = 117, /* and 118 */ ATA_ID_COMMAND_SET_3 = 119, ATA_ID_COMMAND_SET_4 = 120, ATA_ID_LAST_LUN = 126, ATA_ID_DLF = 128, ATA_ID_CSFO = 129, ATA_ID_CFA_POWER = 160, ATA_ID_CFA_KEY_MGMT = 162, ATA_ID_CFA_MODES = 163, ATA_ID_DATA_SET_MGMT = 169, ATA_ID_SCT_CMD_XPORT = 206, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), ATA_ID_SERNO_LEN = 20, ATA_ID_FW_REV_LEN = 8, ATA_ID_PROD_LEN = 40, ATA_ID_WWN_LEN = 8, ATA_PCI_CTL_OFS = 2, ATA_PIO0 = (1 << 0), ATA_PIO1 = ATA_PIO0 | (1 << 1), ATA_PIO2 = ATA_PIO1 | (1 << 2), ATA_PIO3 = ATA_PIO2 | (1 << 3), ATA_PIO4 = ATA_PIO3 | (1 << 4), ATA_PIO5 = ATA_PIO4 | (1 << 5), ATA_PIO6 = ATA_PIO5 | (1 << 6), ATA_PIO4_ONLY = (1 << 4), ATA_SWDMA0 = (1 << 0), ATA_SWDMA1 = ATA_SWDMA0 | (1 << 1), ATA_SWDMA2 = ATA_SWDMA1 | (1 << 2), ATA_SWDMA2_ONLY = (1 << 2), ATA_MWDMA0 = (1 << 0), ATA_MWDMA1 = ATA_MWDMA0 | (1 << 1), ATA_MWDMA2 = ATA_MWDMA1 | (1 << 2), ATA_MWDMA3 = ATA_MWDMA2 | (1 << 3), ATA_MWDMA4 = ATA_MWDMA3 | (1 << 4), ATA_MWDMA12_ONLY = (1 << 1) | (1 << 2), ATA_MWDMA2_ONLY = (1 << 2), ATA_UDMA0 = (1 << 0), ATA_UDMA1 = ATA_UDMA0 | (1 << 1), ATA_UDMA2 = ATA_UDMA1 | (1 << 2), ATA_UDMA3 = ATA_UDMA2 | (1 << 3), ATA_UDMA4 = ATA_UDMA3 | (1 << 4), ATA_UDMA5 = ATA_UDMA4 | (1 << 5), ATA_UDMA6 = ATA_UDMA5 | (1 << 6), ATA_UDMA7 = ATA_UDMA6 | (1 << 7), /* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */ ATA_UDMA24_ONLY = (1 << 2) | (1 << 4), ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */ /* DMA-related */ ATA_PRD_SZ = 8, ATA_PRD_TBL_SZ = (ATA_MAX_PRD * ATA_PRD_SZ), ATA_PRD_EOT = (1 << 31), /* end-of-table flag */ ATA_DMA_TABLE_OFS = 4, ATA_DMA_STATUS = 2, ATA_DMA_CMD = 0, ATA_DMA_WR = (1 << 3), ATA_DMA_START = (1 << 0), ATA_DMA_INTR = (1 << 2), ATA_DMA_ERR = (1 << 1), ATA_DMA_ACTIVE = (1 << 0), /* bits in ATA command block registers */ ATA_HOB = (1 << 7), /* LBA48 selector */ ATA_NIEN = (1 << 1), /* disable-irq flag */ ATA_LBA = (1 << 6), /* LBA28 selector */ ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */ ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */ ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */ ATA_BUSY = (1 << 7), /* BSY status bit */ ATA_DRDY = (1 << 6), /* device ready */ ATA_DF = (1 << 5), /* device fault */ ATA_DSC = (1 << 4), /* drive seek complete */ ATA_DRQ = (1 << 3), /* data request i/o */ ATA_CORR = (1 << 2), /* corrected data error */ ATA_SENSE = (1 << 1), /* sense code available */ ATA_ERR = (1 << 0), /* have an error */ ATA_SRST = (1 << 2), /* software reset */ ATA_ICRC = (1 << 7), /* interface CRC error */ ATA_BBK = ATA_ICRC, /* pre-EIDE: block marked bad */ ATA_UNC = (1 << 6), /* uncorrectable media error */ ATA_MC = (1 << 5), /* media changed */ ATA_IDNF = (1 << 4), /* ID not found */ ATA_MCR = (1 << 3), /* media change requested */ ATA_ABORTED = (1 << 2), /* command aborted */ ATA_TRK0NF = (1 << 1), /* track 0 not found */ ATA_AMNF = (1 << 0), /* address mark not found */ ATAPI_LFS = 0xF0, /* last failed sense */ ATAPI_EOM = ATA_TRK0NF, /* end of media */ ATAPI_ILI = ATA_AMNF, /* illegal length indication */ ATAPI_IO = (1 << 1), ATAPI_COD = (1 << 0), /* ATA command block registers */ ATA_REG_DATA = 0x00, ATA_REG_ERR = 0x01, ATA_REG_NSECT = 0x02, ATA_REG_LBAL = 0x03, ATA_REG_LBAM = 0x04, ATA_REG_LBAH = 0x05, ATA_REG_DEVICE = 0x06, ATA_REG_STATUS = 0x07, ATA_REG_FEATURE = ATA_REG_ERR, /* and their aliases */ ATA_REG_CMD = ATA_REG_STATUS, ATA_REG_BYTEL = ATA_REG_LBAM, ATA_REG_BYTEH = ATA_REG_LBAH, ATA_REG_DEVSEL = ATA_REG_DEVICE, ATA_REG_IRQ = ATA_REG_NSECT, /* ATA device commands */ ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */ ATA_CMD_CHK_POWER = 0xE5, /* check power mode */ ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */ ATA_CMD_IDLE = 0xE3, /* place in idle power mode */ ATA_CMD_EDD = 0x90, /* execute device diagnostic */ ATA_CMD_DOWNLOAD_MICRO = 0x92, ATA_CMD_DOWNLOAD_MICRO_DMA = 0x93, ATA_CMD_NOP = 0x00, ATA_CMD_FLUSH = 0xE7, ATA_CMD_FLUSH_EXT = 0xEA, ATA_CMD_ID_ATA = 0xEC, ATA_CMD_ID_ATAPI = 0xA1, ATA_CMD_SERVICE = 0xA2, ATA_CMD_READ = 0xC8, ATA_CMD_READ_EXT = 0x25, ATA_CMD_READ_QUEUED = 0x26, ATA_CMD_READ_STREAM_EXT = 0x2B, ATA_CMD_READ_STREAM_DMA_EXT = 0x2A, ATA_CMD_WRITE = 0xCA, ATA_CMD_WRITE_EXT = 0x35, ATA_CMD_WRITE_QUEUED = 0x36, ATA_CMD_WRITE_STREAM_EXT = 0x3B, ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A, ATA_CMD_WRITE_FUA_EXT = 0x3D, ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E, ATA_CMD_FPDMA_READ = 0x60, ATA_CMD_FPDMA_WRITE = 0x61, ATA_CMD_NCQ_NON_DATA = 0x63, ATA_CMD_FPDMA_SEND = 0x64, ATA_CMD_FPDMA_RECV = 0x65, ATA_CMD_PIO_READ = 0x20, ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, ATA_CMD_PIO_WRITE_EXT = 0x34, ATA_CMD_READ_MULTI = 0xC4, ATA_CMD_READ_MULTI_EXT = 0x29, ATA_CMD_WRITE_MULTI = 0xC5, ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_SET_MULTI = 0xC6, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, ATA_CMD_WRITE_UNCORR_EXT = 0x45, ATA_CMD_STANDBYNOW1 = 0xE0, ATA_CMD_IDLEIMMEDIATE = 0xE1, ATA_CMD_SLEEP = 0xE6, ATA_CMD_INIT_DEV_PARAMS = 0x91, ATA_CMD_READ_NATIVE_MAX = 0xF8, ATA_CMD_READ_NATIVE_MAX_EXT = 0x27, ATA_CMD_SET_MAX = 0xF9, ATA_CMD_SET_MAX_EXT = 0x37, ATA_CMD_READ_LOG_EXT = 0x2F, ATA_CMD_WRITE_LOG_EXT = 0x3F, ATA_CMD_READ_LOG_DMA_EXT = 0x47, ATA_CMD_WRITE_LOG_DMA_EXT = 0x57, ATA_CMD_TRUSTED_NONDATA = 0x5B, ATA_CMD_TRUSTED_RCV = 0x5C, ATA_CMD_TRUSTED_RCV_DMA = 0x5D, ATA_CMD_TRUSTED_SND = 0x5E, ATA_CMD_TRUSTED_SND_DMA = 0x5F, ATA_CMD_PMP_READ = 0xE4, ATA_CMD_PMP_READ_DMA = 0xE9, ATA_CMD_PMP_WRITE = 0xE8, ATA_CMD_PMP_WRITE_DMA = 0xEB, ATA_CMD_CONF_OVERLAY = 0xB1, ATA_CMD_SEC_SET_PASS = 0xF1, ATA_CMD_SEC_UNLOCK = 0xF2, ATA_CMD_SEC_ERASE_PREP = 0xF3, ATA_CMD_SEC_ERASE_UNIT = 0xF4, ATA_CMD_SEC_FREEZE_LOCK = 0xF5, ATA_CMD_SEC_DISABLE_PASS = 0xF6, ATA_CMD_CONFIG_STREAM = 0x51, ATA_CMD_SMART = 0xB0, ATA_CMD_MEDIA_LOCK = 0xDE, ATA_CMD_MEDIA_UNLOCK = 0xDF, ATA_CMD_DSM = 0x06, ATA_CMD_CHK_MED_CRD_TYP = 0xD1, ATA_CMD_CFA_REQ_EXT_ERR = 0x03, ATA_CMD_CFA_WRITE_NE = 0x38, ATA_CMD_CFA_TRANS_SECT = 0x87, ATA_CMD_CFA_ERASE = 0xC0, ATA_CMD_CFA_WRITE_MULT_NE = 0xCD, ATA_CMD_REQ_SENSE_DATA = 0x0B, ATA_CMD_SANITIZE_DEVICE = 0xB4, ATA_CMD_ZAC_MGMT_IN = 0x4A, ATA_CMD_ZAC_MGMT_OUT = 0x9F, /* marked obsolete in the ATA/ATAPI-7 spec */ ATA_CMD_RESTORE = 0x10, /* Subcmds for ATA_CMD_FPDMA_RECV */ ATA_SUBCMD_FPDMA_RECV_RD_LOG_DMA_EXT = 0x01, ATA_SUBCMD_FPDMA_RECV_ZAC_MGMT_IN = 0x02, /* Subcmds for ATA_CMD_FPDMA_SEND */ ATA_SUBCMD_FPDMA_SEND_DSM = 0x00, ATA_SUBCMD_FPDMA_SEND_WR_LOG_DMA_EXT = 0x02, /* Subcmds for ATA_CMD_NCQ_NON_DATA */ ATA_SUBCMD_NCQ_NON_DATA_ABORT_QUEUE = 0x00, ATA_SUBCMD_NCQ_NON_DATA_SET_FEATURES = 0x05, ATA_SUBCMD_NCQ_NON_DATA_ZERO_EXT = 0x06, ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT = 0x07, /* Subcmds for ATA_CMD_ZAC_MGMT_IN */ ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES = 0x00, /* Subcmds for ATA_CMD_ZAC_MGMT_OUT */ ATA_SUBCMD_ZAC_MGMT_OUT_CLOSE_ZONE = 0x01, ATA_SUBCMD_ZAC_MGMT_OUT_FINISH_ZONE = 0x02, ATA_SUBCMD_ZAC_MGMT_OUT_OPEN_ZONE = 0x03, ATA_SUBCMD_ZAC_MGMT_OUT_RESET_WRITE_POINTER = 0x04, /* READ_LOG_EXT pages */ ATA_LOG_DIRECTORY = 0x0, ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_NCQ_NON_DATA = 0x12, ATA_LOG_NCQ_SEND_RECV = 0x13, ATA_LOG_IDENTIFY_DEVICE = 0x30, /* Identify device log pages: */ ATA_LOG_SECURITY = 0x06, ATA_LOG_SATA_SETTINGS = 0x08, ATA_LOG_ZONED_INFORMATION = 0x09, /* Identify device SATA settings log:*/ ATA_LOG_DEVSLP_OFFSET = 0x30, ATA_LOG_DEVSLP_SIZE = 0x08, ATA_LOG_DEVSLP_MDAT = 0x00, ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, ATA_LOG_DEVSLP_DETO = 0x01, ATA_LOG_DEVSLP_VALID = 0x07, ATA_LOG_DEVSLP_VALID_MASK = 0x80, ATA_LOG_NCQ_PRIO_OFFSET = 0x09, /* NCQ send and receive log */ ATA_LOG_NCQ_SEND_RECV_SUBCMDS_OFFSET = 0x00, ATA_LOG_NCQ_SEND_RECV_SUBCMDS_DSM = (1 << 0), ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET = 0x04, ATA_LOG_NCQ_SEND_RECV_DSM_TRIM = (1 << 0), ATA_LOG_NCQ_SEND_RECV_RD_LOG_OFFSET = 0x08, ATA_LOG_NCQ_SEND_RECV_RD_LOG_SUPPORTED = (1 << 0), ATA_LOG_NCQ_SEND_RECV_WR_LOG_OFFSET = 0x0C, ATA_LOG_NCQ_SEND_RECV_WR_LOG_SUPPORTED = (1 << 0), ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_OFFSET = 0x10, ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_OUT_SUPPORTED = (1 << 0), ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_IN_SUPPORTED = (1 << 1), ATA_LOG_NCQ_SEND_RECV_SIZE = 0x14, /* NCQ Non-Data log */ ATA_LOG_NCQ_NON_DATA_SUBCMDS_OFFSET = 0x00, ATA_LOG_NCQ_NON_DATA_ABORT_OFFSET = 0x00, ATA_LOG_NCQ_NON_DATA_ABORT_NCQ = (1 << 0), ATA_LOG_NCQ_NON_DATA_ABORT_ALL = (1 << 1), ATA_LOG_NCQ_NON_DATA_ABORT_STREAMING = (1 << 2), ATA_LOG_NCQ_NON_DATA_ABORT_NON_STREAMING = (1 << 3), ATA_LOG_NCQ_NON_DATA_ABORT_SELECTED = (1 << 4), ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OFFSET = 0x1C, ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OUT = (1 << 0), ATA_LOG_NCQ_NON_DATA_SIZE = 0x40, /* READ/WRITE LONG (obsolete) */ ATA_CMD_READ_LONG = 0x22, ATA_CMD_READ_LONG_ONCE = 0x23, ATA_CMD_WRITE_LONG = 0x32, ATA_CMD_WRITE_LONG_ONCE = 0x33, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, XFER_UDMA_7 = 0x47, XFER_UDMA_6 = 0x46, XFER_UDMA_5 = 0x45, XFER_UDMA_4 = 0x44, XFER_UDMA_3 = 0x43, XFER_UDMA_2 = 0x42, XFER_UDMA_1 = 0x41, XFER_UDMA_0 = 0x40, XFER_MW_DMA_4 = 0x24, /* CFA only */ XFER_MW_DMA_3 = 0x23, /* CFA only */ XFER_MW_DMA_2 = 0x22, XFER_MW_DMA_1 = 0x21, XFER_MW_DMA_0 = 0x20, XFER_SW_DMA_2 = 0x12, XFER_SW_DMA_1 = 0x11, XFER_SW_DMA_0 = 0x10, XFER_PIO_6 = 0x0E, /* CFA only */ XFER_PIO_5 = 0x0D, /* CFA only */ XFER_PIO_4 = 0x0C, XFER_PIO_3 = 0x0B, XFER_PIO_2 = 0x0A, XFER_PIO_1 = 0x09, XFER_PIO_0 = 0x08, XFER_PIO_SLOW = 0x00, SETFEATURES_WC_ON = 0x02, /* Enable write cache */ SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ SETFEATURES_RA_ON = 0xaa, /* Enable read look-ahead */ SETFEATURES_RA_OFF = 0x55, /* Disable read look-ahead */ /* Enable/Disable Automatic Acoustic Management */ SETFEATURES_AAM_ON = 0x42, SETFEATURES_AAM_OFF = 0xC2, SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ SETFEATURES_SPINUP_TIMEOUT = 30000, /* 30s timeout for drive spin-up from PUIS */ SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */ /* SETFEATURE Sector counts for SATA features */ SATA_FPDMA_OFFSET = 0x01, /* FPDMA non-zero buffer offsets */ SATA_FPDMA_AA = 0x02, /* FPDMA Setup FIS Auto-Activate */ SATA_DIPM = 0x03, /* Device Initiated Power Management */ SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */ SATA_AN = 0x05, /* Asynchronous Notification */ SATA_SSP = 0x06, /* Software Settings Preservation */ SATA_DEVSLP = 0x09, /* Device Sleep */ SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */ /* feature values for SET_MAX */ ATA_SET_MAX_ADDR = 0x00, ATA_SET_MAX_PASSWD = 0x01, ATA_SET_MAX_LOCK = 0x02, ATA_SET_MAX_UNLOCK = 0x03, ATA_SET_MAX_FREEZE_LOCK = 0x04, ATA_SET_MAX_PASSWD_DMA = 0x05, ATA_SET_MAX_UNLOCK_DMA = 0x06, /* feature values for DEVICE CONFIGURATION OVERLAY */ ATA_DCO_RESTORE = 0xC0, ATA_DCO_FREEZE_LOCK = 0xC1, ATA_DCO_IDENTIFY = 0xC2, ATA_DCO_SET = 0xC3, /* feature values for SMART */ ATA_SMART_ENABLE = 0xD8, ATA_SMART_READ_VALUES = 0xD0, ATA_SMART_READ_THRESHOLDS = 0xD1, /* feature values for Data Set Management */ ATA_DSM_TRIM = 0x01, /* password used in LBA Mid / LBA High for executing SMART commands */ ATA_SMART_LBAM_PASS = 0x4F, ATA_SMART_LBAH_PASS = 0xC2, /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: 0=to device, 1=to host */ ATAPI_CDB_LEN = 16, /* PMP stuff */ SATA_PMP_MAX_PORTS = 15, SATA_PMP_CTRL_PORT = 15, SATA_PMP_GSCR_DWORDS = 128, SATA_PMP_GSCR_PROD_ID = 0, SATA_PMP_GSCR_REV = 1, SATA_PMP_GSCR_PORT_INFO = 2, SATA_PMP_GSCR_ERROR = 32, SATA_PMP_GSCR_ERROR_EN = 33, SATA_PMP_GSCR_FEAT = 64, SATA_PMP_GSCR_FEAT_EN = 96, SATA_PMP_PSCR_STATUS = 0, SATA_PMP_PSCR_ERROR = 1, SATA_PMP_PSCR_CONTROL = 2, SATA_PMP_FEAT_BIST = (1 << 0), SATA_PMP_FEAT_PMREQ = (1 << 1), SATA_PMP_FEAT_DYNSSC = (1 << 2), SATA_PMP_FEAT_NOTIFY = (1 << 3), /* cable types */ ATA_CBL_NONE = 0, ATA_CBL_PATA40 = 1, ATA_CBL_PATA80 = 2, ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */ ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */ ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */ ATA_CBL_SATA = 6, /* SATA Status and Control Registers */ SCR_STATUS = 0, SCR_ERROR = 1, SCR_CONTROL = 2, SCR_ACTIVE = 3, SCR_NOTIFICATION = 4, /* SError bits */ SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */ SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */ SERR_DATA = (1 << 8), /* unrecovered data error */ SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */ SERR_PROTOCOL = (1 << 10), /* protocol violation */ SERR_INTERNAL = (1 << 11), /* host internal error */ SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */ SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */ SERR_COMM_WAKE = (1 << 18), /* Comm wake */ SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */ SERR_DISPARITY = (1 << 20), /* Disparity */ SERR_CRC = (1 << 21), /* CRC error */ SERR_HANDSHAKE = (1 << 22), /* Handshake error */ SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */ SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */ SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */ SERR_DEV_XCHG = (1 << 26), /* device exchanged */ }; enum ata_prot_flags { /* protocol flags */ ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */ ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */ ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */ ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */ /* taskfile protocols */ ATA_PROT_UNKNOWN = (u8)-1, ATA_PROT_NODATA = 0, ATA_PROT_PIO = ATA_PROT_FLAG_PIO, ATA_PROT_DMA = ATA_PROT_FLAG_DMA, ATA_PROT_NCQ_NODATA = ATA_PROT_FLAG_NCQ, ATA_PROT_NCQ = ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ, ATAPI_PROT_NODATA = ATA_PROT_FLAG_ATAPI, ATAPI_PROT_PIO = ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO, ATAPI_PROT_DMA = ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA, }; enum ata_ioctls { ATA_IOC_GET_IO32 = 0x309, /* HDIO_GET_32BIT */ ATA_IOC_SET_IO32 = 0x324, /* HDIO_SET_32BIT */ }; /* core structures */ struct ata_bmdma_prd { __le32 addr; __le32 flags_len; }; /* * id tests */ #define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0) #define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9)) #define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8)) #define ata_id_has_ncq(id) ((id)[ATA_ID_SATA_CAPABILITY] & (1 << 8)) #define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1) #define ata_id_removable(id) ((id)[ATA_ID_CONFIG] & (1 << 7)) #define ata_id_has_atapi_AN(id) \ ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ ((id)[ATA_ID_FEATURE_SUPP] & (1 << 5))) #define ata_id_has_fpdma_aa(id) \ ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ ((id)[ATA_ID_FEATURE_SUPP] & (1 << 2))) #define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10)) #define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11)) #define ata_id_u32(id,n) \ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) #define ata_id_u64(id,n) \ ( ((u64) (id)[(n) + 3] << 48) | \ ((u64) (id)[(n) + 2] << 32) | \ ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) #define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4)) #define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8)) #define ata_id_has_ncq_autosense(id) \ ((id)[ATA_ID_FEATURE_SUPP] & (1 << 7)) static inline bool ata_id_has_hipm(const u16 *id) { u16 val = id[ATA_ID_SATA_CAPABILITY]; if (val == 0 || val == 0xffff) return false; return val & (1 << 9); } static inline bool ata_id_has_dipm(const u16 *id) { u16 val = id[ATA_ID_FEATURE_SUPP]; if (val == 0 || val == 0xffff) return false; return val & (1 << 3); } static inline bool ata_id_has_fua(const u16 *id) { if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000) return false; return id[ATA_ID_CFSSE] & (1 << 6); } static inline bool ata_id_has_flush(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return false; return id[ATA_ID_COMMAND_SET_2] & (1 << 12); } static inline bool ata_id_flush_enabled(const u16 *id) { if (ata_id_has_flush(id) == 0) return false; if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return false; return id[ATA_ID_CFS_ENABLE_2] & (1 << 12); } static inline bool ata_id_has_flush_ext(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return false; return id[ATA_ID_COMMAND_SET_2] & (1 << 13); } static inline bool ata_id_flush_ext_enabled(const u16 *id) { if (ata_id_has_flush_ext(id) == 0) return false; if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return false; /* * some Maxtor disks have bit 13 defined incorrectly * so check bit 10 too */ return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400; } static inline u32 ata_id_logical_sector_size(const u16 *id) { /* T13/1699-D Revision 6a, Sep 6, 2008. Page 128. * IDENTIFY DEVICE data, word 117-118. * 0xd000 ignores bit 13 (logical:physical > 1) */ if ((id[ATA_ID_SECTOR_SIZE] & 0xd000) == 0x5000) return (((id[ATA_ID_LOGICAL_SECTOR_SIZE+1] << 16) + id[ATA_ID_LOGICAL_SECTOR_SIZE]) * sizeof(u16)) ; return ATA_SECT_SIZE; } static inline u8 ata_id_log2_per_physical_sector(const u16 *id) { /* T13/1699-D Revision 6a, Sep 6, 2008. Page 128. * IDENTIFY DEVICE data, word 106. * 0xe000 ignores bit 12 (logical sector > 512 bytes) */ if ((id[ATA_ID_SECTOR_SIZE] & 0xe000) == 0x6000) return (id[ATA_ID_SECTOR_SIZE] & 0xf); return 0; } /* Offset of logical sectors relative to physical sectors. * * If device has more than one logical sector per physical sector * (aka 512 byte emulation), vendors might offset the "sector 0" address * so sector 63 is "naturally aligned" - e.g. FAT partition table. * This avoids Read/Mod/Write penalties when using FAT partition table * and updating "well aligned" (FS perspective) physical sectors on every * transaction. */ static inline u16 ata_id_logical_sector_offset(const u16 *id, u8 log2_per_phys) { u16 word_209 = id[209]; if ((log2_per_phys > 1) && (word_209 & 0xc000) == 0x4000) { u16 first = word_209 & 0x3fff; if (first > 0) return (1 << log2_per_phys) - first; } return 0; } static inline bool ata_id_has_lba48(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return false; if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2)) return false; return id[ATA_ID_COMMAND_SET_2] & (1 << 10); } static inline bool ata_id_lba48_enabled(const u16 *id) { if (ata_id_has_lba48(id) == 0) return false; if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return false; return id[ATA_ID_CFS_ENABLE_2] & (1 << 10); } static inline bool ata_id_hpa_enabled(const u16 *id) { /* Yes children, word 83 valid bits cover word 82 data */ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return false; /* And 87 covers 85-87 */ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return false; /* Check command sets enabled as well as supported */ if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0) return false; return id[ATA_ID_COMMAND_SET_1] & (1 << 10); } static inline bool ata_id_has_wcache(const u16 *id) { /* Yes children, word 83 valid bits cover word 82 data */ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return false; return id[ATA_ID_COMMAND_SET_1] & (1 << 5); } static inline bool ata_id_has_pm(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return false; return id[ATA_ID_COMMAND_SET_1] & (1 << 3); } static inline bool ata_id_rahead_enabled(const u16 *id) { if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return false; return id[ATA_ID_CFS_ENABLE_1] & (1 << 6); } static inline bool ata_id_wcache_enabled(const u16 *id) { if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return false; return id[ATA_ID_CFS_ENABLE_1] & (1 << 5); } static inline bool ata_id_has_read_log_dma_ext(const u16 *id) { /* Word 86 must have bit 15 set */ if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) return false; /* READ LOG DMA EXT support can be signaled either from word 119 * or from word 120. The format is the same for both words: Bit * 15 must be cleared, bit 14 set and bit 3 set. */ if ((id[ATA_ID_COMMAND_SET_3] & 0xC008) == 0x4008 || (id[ATA_ID_COMMAND_SET_4] & 0xC008) == 0x4008) return true; return false; } static inline bool ata_id_has_sense_reporting(const u16 *id) { if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) return false; return id[ATA_ID_COMMAND_SET_3] & (1 << 6); } static inline bool ata_id_sense_reporting_enabled(const u16 *id) { if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) return false; return id[ATA_ID_COMMAND_SET_4] & (1 << 6); } /** * * Word: 206 - SCT Command Transport * 15:12 - Vendor Specific * 11:6 - Reserved * 5 - SCT Command Transport Data Tables supported * 4 - SCT Command Transport Features Control supported * 3 - SCT Command Transport Error Recovery Control supported * 2 - SCT Command Transport Write Same supported * 1 - SCT Command Transport Long Sector Access supported * 0 - SCT Command Transport supported */ static inline bool ata_id_sct_data_tables(const u16 *id) { return id[ATA_ID_SCT_CMD_XPORT] & (1 << 5) ? true : false; } static inline bool ata_id_sct_features_ctrl(const u16 *id) { return id[ATA_ID_SCT_CMD_XPORT] & (1 << 4) ? true : false; } static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id) { return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false; } static inline bool ata_id_sct_long_sector_access(const u16 *id) { return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false; } static inline bool ata_id_sct_supported(const u16 *id) { return id[ATA_ID_SCT_CMD_XPORT] & (1 << 0) ? true : false; } /** * ata_id_major_version - get ATA level of drive * @id: Identify data * * Caveats: * ATA-1 considers identify optional * ATA-2 introduces mandatory identify * ATA-3 introduces word 80 and accurate reporting * * The practical impact of this is that ata_id_major_version cannot * reliably report on drives below ATA3. */ static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; if (id[ATA_ID_MAJOR_VER] == 0xFFFF) return 0; for (mver = 14; mver >= 1; mver--) if (id[ATA_ID_MAJOR_VER] & (1 << mver)) break; return mver; } static inline bool ata_id_is_sata(const u16 *id) { /* * See if word 93 is 0 AND drive is at least ATA-5 compatible * verifying that word 80 by casting it to a signed type -- * this trick allows us to filter out the reserved values of * 0x0000 and 0xffff along with the earlier ATA revisions... */ if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020) return true; return false; } static inline bool ata_id_has_tpm(const u16 *id) { /* The TPM bits are only valid on ATA8 */ if (ata_id_major_version(id) < 8) return false; if ((id[48] & 0xC000) != 0x4000) return false; return id[48] & (1 << 0); } static inline bool ata_id_has_dword_io(const u16 *id) { /* ATA 8 reuses this flag for "trusted" computing */ if (ata_id_major_version(id) > 7) return false; return id[ATA_ID_DWORD_IO] & (1 << 0); } static inline bool ata_id_has_trusted(const u16 *id) { if (ata_id_major_version(id) <= 7) return false; return id[ATA_ID_TRUSTED] & (1 << 0); } static inline bool ata_id_has_unload(const u16 *id) { if (ata_id_major_version(id) >= 7 && (id[ATA_ID_CFSSE] & 0xC000) == 0x4000 && id[ATA_ID_CFSSE] & (1 << 13)) return true; return false; } static inline bool ata_id_has_wwn(const u16 *id) { return (id[ATA_ID_CSF_DEFAULT] & 0xC100) == 0x4100; } static inline int ata_id_form_factor(const u16 *id) { u16 val = id[168]; if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff) return 0; val &= 0xf; if (val > 5) return 0; return val; } static inline int ata_id_rotation_rate(const u16 *id) { u16 val = id[217]; if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff) return 0; if (val > 1 && val < 0x401) return 0; return val; } static inline bool ata_id_has_ncq_send_and_recv(const u16 *id) { return id[ATA_ID_SATA_CAPABILITY_2] & BIT(6); } static inline bool ata_id_has_ncq_non_data(const u16 *id) { return id[ATA_ID_SATA_CAPABILITY_2] & BIT(5); } static inline bool ata_id_has_ncq_prio(const u16 *id) { return id[ATA_ID_SATA_CAPABILITY] & BIT(12); } static inline bool ata_id_has_trim(const u16 *id) { if (ata_id_major_version(id) >= 7 && (id[ATA_ID_DATA_SET_MGMT] & 1)) return true; return false; } static inline bool ata_id_has_zero_after_trim(const u16 *id) { /* DSM supported, deterministic read, and read zero after trim set */ if (ata_id_has_trim(id) && (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020) return true; return false; } static inline bool ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command has not been issued to the device then the values of id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */ return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */ id[ATA_ID_CUR_CYLS] && /* cylinders in current translation */ id[ATA_ID_CUR_HEADS] && /* heads in current translation */ id[ATA_ID_CUR_HEADS] <= 16 && id[ATA_ID_CUR_SECTORS]; /* sectors in current translation */ } static inline bool ata_id_is_cfa(const u16 *id) { if ((id[ATA_ID_CONFIG] == 0x848A) || /* Traditional CF */ (id[ATA_ID_CONFIG] == 0x844A)) /* Delkin Devices CF */ return true; /* * CF specs don't require specific value in the word 0 anymore and yet * they forbid to report the ATA version in the word 80 and require the * CFA feature set support to be indicated in the word 83 in this case. * Unfortunately, some cards only follow either of this requirements, * and while those that don't indicate CFA feature support need some * sort of quirk list, it seems impractical for the ones that do... */ return (id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004; } static inline bool ata_id_is_ssd(const u16 *id) { return id[ATA_ID_ROT_SPEED] == 0x01; } static inline u8 ata_id_zoned_cap(const u16 *id) { return (id[ATA_ID_ADDITIONAL_SUPP] & 0x3); } static inline bool ata_id_pio_need_iordy(const u16 *id, const u8 pio) { /* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */ if (pio > 4 && ata_id_is_cfa(id)) return false; /* For PIO3 and higher it is mandatory. */ if (pio > 2) return true; /* Turn it on when possible. */ return ata_id_has_iordy(id); } static inline bool ata_drive_40wire(const u16 *dev_id) { if (ata_id_is_sata(dev_id)) return false; /* SATA */ if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000) return false; /* 80 wire */ return true; } static inline bool ata_drive_40wire_relaxed(const u16 *dev_id) { if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000) return false; /* 80 wire */ return true; } static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3; switch (tmp) { case 0: return 12; case 1: return 16; default: return -1; } } static inline int atapi_command_packet_set(const u16 *dev_id) { return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f; } static inline bool atapi_id_dmadir(const u16 *dev_id) { return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000); } /* * ata_id_is_lba_capacity_ok() performs a sanity check on * the claimed LBA capacity value for the device. * * Returns 1 if LBA capacity looks sensible, 0 otherwise. * * It is called only once for each device. */ static inline bool ata_id_is_lba_capacity_ok(u16 *id) { unsigned long lba_sects, chs_sects, head, tail; /* No non-LBA info .. so valid! */ if (id[ATA_ID_CYLS] == 0) return true; lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY); /* * The ATA spec tells large drives to return * C/H/S = 16383/16/63 independent of their size. * Some drives can be jumpered to use 15 heads instead of 16. * Some drives can be jumpered to use 4092 cyls instead of 16383. */ if ((id[ATA_ID_CYLS] == 16383 || (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) && id[ATA_ID_SECTORS] == 63 && (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) && (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS])) return true; chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS]; /* perform a rough sanity check on lba_sects: within 10% is OK */ if (lba_sects - chs_sects < chs_sects/10) return true; /* some drives have the word order reversed */ head = (lba_sects >> 16) & 0xffff; tail = lba_sects & 0xffff; lba_sects = head | (tail << 16); if (lba_sects - chs_sects < chs_sects/10) { *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects); return true; /* LBA capacity is (now) good */ } return false; /* LBA capacity value may be bad */ } static inline void ata_id_to_hd_driveid(u16 *id) { #ifdef __BIG_ENDIAN /* accessed in struct hd_driveid as 8-bit values */ id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]); id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]); id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]); id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]); id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]); /* as 32-bit values */ *(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY); *(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG); /* as 64-bit value */ *(u64 *)&id[ATA_ID_LBA_CAPACITY_2] = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); #endif } static inline bool ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) == ATA_DRDY); } static inline bool lba_28_ok(u64 block, u32 n_block) { /* check the ending block number: must be LESS THAN 0x0fffffff */ return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= ATA_MAX_SECTORS); } static inline bool lba_48_ok(u64 block, u32 n_block) { /* check the ending block number */ return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= ATA_MAX_SECTORS_LBA48); } #define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff) #define sata_pmp_gscr_devid(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16) #define sata_pmp_gscr_rev(gscr) (((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff) #define sata_pmp_gscr_ports(gscr) ((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf) #endif /* __LINUX_ATA_H__ */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef IOCONTEXT_H #define IOCONTEXT_H #include <linux/radix-tree.h> #include <linux/rcupdate.h> #include <linux/workqueue.h> enum { ICQ_EXITED = 1 << 2, ICQ_DESTROYED = 1 << 3, }; /* * An io_cq (icq) is association between an io_context (ioc) and a * request_queue (q). This is used by elevators which need to track * information per ioc - q pair. * * Elevator can request use of icq by setting elevator_type->icq_size and * ->icq_align. Both size and align must be larger than that of struct * io_cq and elevator can use the tail area for private information. The * recommended way to do this is defining a struct which contains io_cq as * the first member followed by private members and using its size and * align. For example, * * struct snail_io_cq { * struct io_cq icq; * int poke_snail; * int feed_snail; * }; * * struct elevator_type snail_elv_type { * .ops = { ... }, * .icq_size = sizeof(struct snail_io_cq), * .icq_align = __alignof__(struct snail_io_cq), * ... * }; * * If icq_size is set, block core will manage icq's. All requests will * have its ->elv.icq field set before elevator_ops->elevator_set_req_fn() * is called and be holding a reference to the associated io_context. * * Whenever a new icq is created, elevator_ops->elevator_init_icq_fn() is * called and, on destruction, ->elevator_exit_icq_fn(). Both functions * are called with both the associated io_context and queue locks held. * * Elevator is allowed to lookup icq using ioc_lookup_icq() while holding * queue lock but the returned icq is valid only until the queue lock is * released. Elevators can not and should not try to create or destroy * icq's. * * As icq's are linked from both ioc and q, the locking rules are a bit * complex. * * - ioc lock nests inside q lock. * * - ioc->icq_list and icq->ioc_node are protected by ioc lock. * q->icq_list and icq->q_node by q lock. * * - ioc->icq_tree and ioc->icq_hint are protected by ioc lock, while icq * itself is protected by q lock. However, both the indexes and icq * itself are also RCU managed and lookup can be performed holding only * the q lock. * * - icq's are not reference counted. They are destroyed when either the * ioc or q goes away. Each request with icq set holds an extra * reference to ioc to ensure it stays until the request is completed. * * - Linking and unlinking icq's are performed while holding both ioc and q * locks. Due to the lock ordering, q exit is simple but ioc exit * requires reverse-order double lock dance. */ struct io_cq { struct request_queue *q; struct io_context *ioc; /* * q_node and ioc_node link io_cq through icq_list of q and ioc * respectively. Both fields are unused once ioc_exit_icq() is * called and shared with __rcu_icq_cache and __rcu_head which are * used for RCU free of io_cq. */ union { struct list_head q_node; struct kmem_cache *__rcu_icq_cache; }; union { struct hlist_node ioc_node; struct rcu_head __rcu_head; }; unsigned int flags; }; /* * I/O subsystem state of the associated processes. It is refcounted * and kmalloc'ed. These could be shared between processes. */ struct io_context { atomic_long_t refcount; atomic_t active_ref; atomic_t nr_tasks; /* all the fields below are protected by this lock */ spinlock_t lock; unsigned short ioprio; struct radix_tree_root icq_tree; struct io_cq __rcu *icq_hint; struct hlist_head icq_list; struct work_struct release_work; }; /** * get_io_context_active - get active reference on ioc * @ioc: ioc of interest * * Only iocs with active reference can issue new IOs. This function * acquires an active reference on @ioc. The caller must already have an * active reference on @ioc. */ static inline void get_io_context_active(struct io_context *ioc) { WARN_ON_ONCE(atomic_long_read(&ioc->refcount) <= 0); WARN_ON_ONCE(atomic_read(&ioc->active_ref) <= 0); atomic_long_inc(&ioc->refcount); atomic_inc(&ioc->active_ref); } static inline void ioc_task_link(struct io_context *ioc) { get_io_context_active(ioc); WARN_ON_ONCE(atomic_read(&ioc->nr_tasks) <= 0); atomic_inc(&ioc->nr_tasks); } struct task_struct; #ifdef CONFIG_BLOCK void put_io_context(struct io_context *ioc); void put_io_context_active(struct io_context *ioc); void exit_io_context(struct task_struct *task); struct io_context *get_task_io_context(struct task_struct *task, gfp_t gfp_flags, int node); #else struct io_context; static inline void put_io_context(struct io_context *ioc) { } static inline void exit_io_context(struct task_struct *task) { } #endif #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __VDSO_MATH64_H #define __VDSO_MATH64_H static __always_inline u32 __iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) { u32 ret = 0; while (dividend >= divisor) { /* The following asm() prevents the compiler from optimising this loop into a modulo operation. */ asm("" : "+rm"(dividend)); dividend -= divisor; ret++; } *remainder = dividend; return ret; } #endif /* __VDSO_MATH64_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 /* SPDX-License-Identifier: GPL-2.0 */ /* * include/linux/cpu.h - generic cpu definition * * This is mainly for topological representation. We define the * basic 'struct cpu' here, which can be embedded in per-arch * definitions of processors. * * Basic handling of the devices is done in drivers/base/cpu.c * * CPUs are exported via sysfs in the devices/system/cpu * directory. */ #ifndef _LINUX_CPU_H_ #define _LINUX_CPU_H_ #include <linux/node.h> #include <linux/compiler.h> #include <linux/cpumask.h> #include <linux/cpuhotplug.h> struct device; struct device_node; struct attribute_group; struct cpu { int node_id; /* The node which contains the CPU */ int hotpluggable; /* creates sysfs control file if hotpluggable */ struct device dev; }; extern void boot_cpu_init(void); extern void boot_cpu_hotplug_init(void); extern void cpu_init(void); extern void trap_init(void); extern int register_cpu(struct cpu *cpu, int num); extern struct device *get_cpu_device(unsigned cpu); extern bool cpu_is_hotpluggable(unsigned cpu); extern bool arch_match_cpu_phys_id(int cpu, u64 phys_id); extern bool arch_find_n_match_cpu_physical_id(struct device_node *cpun, int cpu, unsigned int *thread); extern int cpu_add_dev_attr(struct device_attribute *attr); extern void cpu_remove_dev_attr(struct device_attribute *attr); extern int cpu_add_dev_attr_group(struct attribute_group *attrs); extern void cpu_remove_dev_attr_group(struct attribute_group *attrs); extern ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_mds(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_tsx_async_abort(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_itlb_multihit(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t cpu_show_srbds(struct device *dev, struct device_attribute *attr, char *buf); extern __printf(4, 5) struct device *cpu_device_create(struct device *parent, void *drvdata, const struct attribute_group **groups, const char *fmt, ...); #ifdef CONFIG_HOTPLUG_CPU extern void unregister_cpu(struct cpu *cpu); extern ssize_t arch_cpu_probe(const char *, size_t); extern ssize_t arch_cpu_release(const char *, size_t); #endif /* * These states are not related to the core CPU hotplug mechanism. They are * used by various (sub)architectures to track internal state */ #define CPU_ONLINE 0x0002 /* CPU is up */ #define CPU_UP_PREPARE 0x0003 /* CPU coming up */ #define CPU_DEAD 0x0007 /* CPU dead */ #define CPU_DEAD_FROZEN 0x0008 /* CPU timed out on unplug */ #define CPU_POST_DEAD 0x0009 /* CPU successfully unplugged */ #define CPU_BROKEN 0x000B /* CPU did not die properly */ #ifdef CONFIG_SMP extern bool cpuhp_tasks_frozen; int add_cpu(unsigned int cpu); int cpu_device_up(struct device *dev); void notify_cpu_starting(unsigned int cpu); extern void cpu_maps_update_begin(void); extern void cpu_maps_update_done(void); int bringup_hibernate_cpu(unsigned int sleep_cpu); void bringup_nonboot_cpus(unsigned int setup_max_cpus); #else /* CONFIG_SMP */ #define cpuhp_tasks_frozen 0 static inline void cpu_maps_update_begin(void) { } static inline void cpu_maps_update_done(void) { } #endif /* CONFIG_SMP */ extern struct bus_type cpu_subsys; #ifdef CONFIG_HOTPLUG_CPU extern void cpus_write_lock(void); extern void cpus_write_unlock(void); extern void cpus_read_lock(void); extern void cpus_read_unlock(void); extern int cpus_read_trylock(void); extern void lockdep_assert_cpus_held(void); extern void cpu_hotplug_disable(void); extern void cpu_hotplug_enable(void); void clear_tasks_mm_cpumask(int cpu); int remove_cpu(unsigned int cpu); int cpu_device_down(struct device *dev); extern void smp_shutdown_nonboot_cpus(unsigned int primary_cpu); #else /* CONFIG_HOTPLUG_CPU */ static inline void cpus_write_lock(void) { } static inline void cpus_write_unlock(void) { } static inline void cpus_read_lock(void) { } static inline void cpus_read_unlock(void) { } static inline int cpus_read_trylock(void) { return true; } static inline void lockdep_assert_cpus_held(void) { } static inline void cpu_hotplug_disable(void) { } static inline void cpu_hotplug_enable(void) { } static inline void smp_shutdown_nonboot_cpus(unsigned int primary_cpu) { } #endif /* !CONFIG_HOTPLUG_CPU */ /* Wrappers which go away once all code is converted */ static inline void cpu_hotplug_begin(void) { cpus_write_lock(); } static inline void cpu_hotplug_done(void) { cpus_write_unlock(); } static inline void get_online_cpus(void) { cpus_read_lock(); } static inline void put_online_cpus(void) { cpus_read_unlock(); } #ifdef CONFIG_PM_SLEEP_SMP extern int freeze_secondary_cpus(int primary); extern void thaw_secondary_cpus(void); static inline int suspend_disable_secondary_cpus(void) { int cpu = 0; if (IS_ENABLED(CONFIG_PM_SLEEP_SMP_NONZERO_CPU)) cpu = -1; return freeze_secondary_cpus(cpu); } static inline void suspend_enable_secondary_cpus(void) { return thaw_secondary_cpus(); } #else /* !CONFIG_PM_SLEEP_SMP */ static inline void thaw_secondary_cpus(void) {} static inline int suspend_disable_secondary_cpus(void) { return 0; } static inline void suspend_enable_secondary_cpus(void) { } #endif /* !CONFIG_PM_SLEEP_SMP */ void cpu_startup_entry(enum cpuhp_state state); void cpu_idle_poll_ctrl(bool enable); /* Attach to any functions which should be considered cpuidle. */ #define __cpuidle __section(".cpuidle.text") bool cpu_in_idle(unsigned long pc); void arch_cpu_idle(void); void arch_cpu_idle_prepare(void); void arch_cpu_idle_enter(void); void arch_cpu_idle_exit(void); void arch_cpu_idle_dead(void); int cpu_report_state(int cpu); int cpu_check_up_prepare(int cpu); void cpu_set_state_online(int cpu); void play_idle_precise(u64 duration_ns, u64 latency_ns); static inline void play_idle(unsigned long duration_us) { play_idle_precise(duration_us * NSEC_PER_USEC, U64_MAX); } #ifdef CONFIG_HOTPLUG_CPU bool cpu_wait_death(unsigned int cpu, int seconds); bool cpu_report_death(void); void cpuhp_report_idle_dead(void); #else static inline void cpuhp_report_idle_dead(void) { } #endif /* #ifdef CONFIG_HOTPLUG_CPU */ enum cpuhp_smt_control { CPU_SMT_ENABLED, CPU_SMT_DISABLED, CPU_SMT_FORCE_DISABLED, CPU_SMT_NOT_SUPPORTED, CPU_SMT_NOT_IMPLEMENTED, }; #if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_SMT) extern enum cpuhp_smt_control cpu_smt_control; extern void cpu_smt_disable(bool force); extern void cpu_smt_check_topology(void); extern bool cpu_smt_possible(void); extern int cpuhp_smt_enable(void); extern int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval); #else # define cpu_smt_control (CPU_SMT_NOT_IMPLEMENTED) static inline void cpu_smt_disable(bool force) { } static inline void cpu_smt_check_topology(void) { } static inline bool cpu_smt_possible(void) { return false; } static inline int cpuhp_smt_enable(void) { return 0; } static inline int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval) { return 0; } #endif extern bool cpu_mitigations_off(void); extern bool cpu_mitigations_auto_nosmt(void); #endif /* _LINUX_CPU_H_ */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* Asymmetric Public-key cryptography key type interface * * See Documentation/crypto/asymmetric-keys.rst * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) */ #ifndef _KEYS_ASYMMETRIC_TYPE_H #define _KEYS_ASYMMETRIC_TYPE_H #include <linux/key-type.h> #include <linux/verification.h> extern struct key_type key_type_asymmetric; /* * The key payload is four words. The asymmetric-type key uses them as * follows: */ enum asymmetric_payload_bits { asym_crypto, /* The data representing the key */ asym_subtype, /* Pointer to an asymmetric_key_subtype struct */ asym_key_ids, /* Pointer to an asymmetric_key_ids struct */ asym_auth /* The key's authorisation (signature, parent key ID) */ }; /* * Identifiers for an asymmetric key ID. We have three ways of looking up a * key derived from an X.509 certificate: * * (1) Serial Number & Issuer. Non-optional. This is the only valid way to * map a PKCS#7 signature to an X.509 certificate. * * (2) Issuer & Subject Unique IDs. Optional. These were the original way to * match X.509 certificates, but have fallen into disuse in favour of (3). * * (3) Auth & Subject Key Identifiers. Optional. SKIDs are only provided on * CA keys that are intended to sign other keys, so don't appear in end * user certificates unless forced. * * We could also support an PGP key identifier, which is just a SHA1 sum of the * public key and certain parameters, but since we don't support PGP keys at * the moment, we shall ignore those. * * What we actually do is provide a place where binary identifiers can be * stashed and then compare against them when checking for an id match. */ struct asymmetric_key_id { unsigned short len; unsigned char data[]; }; struct asymmetric_key_ids { void *id[2]; }; extern bool asymmetric_key_id_same(const struct asymmetric_key_id *kid1, const struct asymmetric_key_id *kid2); extern bool asymmetric_key_id_partial(const struct asymmetric_key_id *kid1, const struct asymmetric_key_id *kid2); extern struct asymmetric_key_id *asymmetric_key_generate_id(const void *val_1, size_t len_1, const void *val_2, size_t len_2); static inline const struct asymmetric_key_ids *asymmetric_key_ids(const struct key *key) { return key->payload.data[asym_key_ids]; } extern struct key *find_asymmetric_key(struct key *keyring, const struct asymmetric_key_id *id_0, const struct asymmetric_key_id *id_1, bool partial); /* * The payload is at the discretion of the subtype. */ #endif /* _KEYS_ASYMMETRIC_TYPE_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_VMALLOC_H #define _LINUX_VMALLOC_H #include <linux/spinlock.h> #include <linux/init.h> #include <linux/list.h> #include <linux/llist.h> #include <asm/page.h> /* pgprot_t */ #include <linux/rbtree.h> #include <linux/overflow.h> #include <asm/vmalloc.h> struct vm_area_struct; /* vma defining user mapping in mm_types.h */ struct notifier_block; /* in notifier.h */ /* bits in flags of vmalloc's vm_struct below */ #define VM_IOREMAP 0x00000001 /* ioremap() and friends */ #define VM_ALLOC 0x00000002 /* vmalloc() */ #define VM_MAP 0x00000004 /* vmap()ed pages */ #define VM_USERMAP 0x00000008 /* suitable for remap_vmalloc_range */ #define VM_DMA_COHERENT 0x00000010 /* dma_alloc_coherent */ #define VM_UNINITIALIZED 0x00000020 /* vm_struct is not fully initialized */ #define VM_NO_GUARD 0x00000040 /* don't add guard page */ #define VM_KASAN 0x00000080 /* has allocated kasan shadow memory */ #define VM_FLUSH_RESET_PERMS 0x00000100 /* reset direct map and flush TLB on unmap, can't be freed in atomic context */ #define VM_MAP_PUT_PAGES 0x00000200 /* put pages and free array in vfree */ /* * VM_KASAN is used slighly differently depending on CONFIG_KASAN_VMALLOC. * * If IS_ENABLED(CONFIG_KASAN_VMALLOC), VM_KASAN is set on a vm_struct after * shadow memory has been mapped. It's used to handle allocation errors so that * we don't try to poision shadow on free if it was never allocated. * * Otherwise, VM_KASAN is set for kasan_module_alloc() allocations and used to * determine which allocations need the module shadow freed. */ /* bits [20..32] reserved for arch specific ioremap internals */ /* * Maximum alignment for ioremap() regions. * Can be overriden by arch-specific value. */ #ifndef IOREMAP_MAX_ORDER #define IOREMAP_MAX_ORDER (7 + PAGE_SHIFT) /* 128 pages */ #endif struct vm_struct { struct vm_struct *next; void *addr; unsigned long size; unsigned long flags; struct page **pages; unsigned int nr_pages; phys_addr_t phys_addr; const void *caller; }; struct vmap_area { unsigned long va_start; unsigned long va_end; struct rb_node rb_node; /* address sorted rbtree */ struct list_head list; /* address sorted list */ /* * The following three variables can be packed, because * a vmap_area object is always one of the three states: * 1) in "free" tree (root is vmap_area_root) * 2) in "busy" tree (root is free_vmap_area_root) * 3) in purge list (head is vmap_purge_list) */ union { unsigned long subtree_max_size; /* in "free" tree */ struct vm_struct *vm; /* in "busy" tree */ struct llist_node purge_list; /* in purge list */ }; }; /* * Highlevel APIs for driver use */ extern void vm_unmap_ram(const void *mem, unsigned int count); extern void *vm_map_ram(struct page **pages, unsigned int count, int node); extern void vm_unmap_aliases(void); #ifdef CONFIG_MMU extern void __init vmalloc_init(void); extern unsigned long vmalloc_nr_pages(void); #else static inline void vmalloc_init(void) { } static inline unsigned long vmalloc_nr_pages(void) { return 0; } #endif extern void *vmalloc(unsigned long size); extern void *vzalloc(unsigned long size); extern void *vmalloc_user(unsigned long size); extern void *vmalloc_node(unsigned long size, int node); extern void *vzalloc_node(unsigned long size, int node); extern void *vmalloc_32(unsigned long size); extern void *vmalloc_32_user(unsigned long size); extern void *__vmalloc(unsigned long size, gfp_t gfp_mask); extern void *__vmalloc_node_range(unsigned long size, unsigned long align, unsigned long start, unsigned long end, gfp_t gfp_mask, pgprot_t prot, unsigned long vm_flags, int node, const void *caller); void *__vmalloc_node(unsigned long size, unsigned long align, gfp_t gfp_mask, int node, const void *caller); extern void vfree(const void *addr); extern void vfree_atomic(const void *addr); extern void *vmap(struct page **pages, unsigned int count, unsigned long flags, pgprot_t prot); void *vmap_pfn(unsigned long *pfns, unsigned int count, pgprot_t prot); extern void vunmap(const void *addr); extern int remap_vmalloc_range_partial(struct vm_area_struct *vma, unsigned long uaddr, void *kaddr, unsigned long pgoff, unsigned long size); extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr, unsigned long pgoff); /* * Architectures can set this mask to a combination of PGTBL_P?D_MODIFIED values * and let generic vmalloc and ioremap code know when arch_sync_kernel_mappings() * needs to be called. */ #ifndef ARCH_PAGE_TABLE_SYNC_MASK #define ARCH_PAGE_TABLE_SYNC_MASK 0 #endif /* * There is no default implementation for arch_sync_kernel_mappings(). It is * relied upon the compiler to optimize calls out if ARCH_PAGE_TABLE_SYNC_MASK * is 0. */ void arch_sync_kernel_mappings(unsigned long start, unsigned long end); /* * Lowlevel-APIs (not for driver use!) */ static inline size_t get_vm_area_size(const struct vm_struct *area) { if (!(area->flags & VM_NO_GUARD)) /* return actual size without guard page */ return area->size - PAGE_SIZE; else return area->size; } extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags); extern struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags, const void *caller); extern struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags, unsigned long start, unsigned long end, const void *caller); void free_vm_area(struct vm_struct *area); extern struct vm_struct *remove_vm_area(const void *addr); extern struct vm_struct *find_vm_area(const void *addr); #ifdef CONFIG_MMU extern int map_kernel_range_noflush(unsigned long start, unsigned long size, pgprot_t prot, struct page **pages); int map_kernel_range(unsigned long start, unsigned long size, pgprot_t prot, struct page **pages); extern void unmap_kernel_range_noflush(unsigned long addr, unsigned long size); extern void unmap_kernel_range(unsigned long addr, unsigned long size); static inline void set_vm_flush_reset_perms(void *addr) { struct vm_struct *vm = find_vm_area(addr); if (vm) vm->flags |= VM_FLUSH_RESET_PERMS; } #else static inline int map_kernel_range_noflush(unsigned long start, unsigned long size, pgprot_t prot, struct page **pages) { return size >> PAGE_SHIFT; } #define map_kernel_range map_kernel_range_noflush static inline void unmap_kernel_range_noflush(unsigned long addr, unsigned long size) { } #define unmap_kernel_range unmap_kernel_range_noflush static inline void set_vm_flush_reset_perms(void *addr) { } #endif /* for /dev/kmem */ extern long vread(char *buf, char *addr, unsigned long count); extern long vwrite(char *buf, char *addr, unsigned long count); /* * Internals. Dont't use.. */ extern struct list_head vmap_area_list; extern __init void vm_area_add_early(struct vm_struct *vm); extern __init void vm_area_register_early(struct vm_struct *vm, size_t align); #ifdef CONFIG_SMP # ifdef CONFIG_MMU struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, const size_t *sizes, int nr_vms, size_t align); void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms); # else static inline struct vm_struct ** pcpu_get_vm_areas(const unsigned long *offsets, const size_t *sizes, int nr_vms, size_t align) { return NULL; } static inline void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms) { } # endif #endif #ifdef CONFIG_MMU #define VMALLOC_TOTAL (VMALLOC_END - VMALLOC_START) #else #define VMALLOC_TOTAL 0UL #endif int register_vmap_purge_notifier(struct notifier_block *nb); int unregister_vmap_purge_notifier(struct notifier_block *nb); #endif /* _LINUX_VMALLOC_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 /* SPDX-License-Identifier: GPL-2.0-only */ /* * User-mode machine state access * * Copyright (C) 2007 Red Hat, Inc. All rights reserved. * * Red Hat Author: Roland McGrath. */ #ifndef _LINUX_REGSET_H #define _LINUX_REGSET_H 1 #include <linux/compiler.h> #include <linux/types.h> #include <linux/bug.h> #include <linux/uaccess.h> struct task_struct; struct user_regset; struct membuf { void *p; size_t left; }; static inline int membuf_zero(struct membuf *s, size_t size) { if (s->left) { if (size > s->left) size = s->left; memset(s->p, 0, size); s->p += size; s->left -= size; } return s->left; } static inline int membuf_write(struct membuf *s, const void *v, size_t size) { if (s->left) { if (size > s->left) size = s->left; memcpy(s->p, v, size); s->p += size; s->left -= size; } return s->left; } /* current s->p must be aligned for v; v must be a scalar */ #define membuf_store(s, v) \ ({ \ struct membuf *__s = (s); \ if (__s->left) { \ typeof(v) __v = (v); \ size_t __size = sizeof(__v); \ if (unlikely(__size > __s->left)) { \ __size = __s->left; \ memcpy(__s->p, &__v, __size); \ } else { \ *(typeof(__v + 0) *)__s->p = __v; \ } \ __s->p += __size; \ __s->left -= __size; \ } \ __s->left;}) /** * user_regset_active_fn - type of @active function in &struct user_regset * @target: thread being examined * @regset: regset being examined * * Return -%ENODEV if not available on the hardware found. * Return %0 if no interesting state in this thread. * Return >%0 number of @size units of interesting state. * Any get call fetching state beyond that number will * see the default initialization state for this data, * so a caller that knows what the default state is need * not copy it all out. * This call is optional; the pointer is %NULL if there * is no inexpensive check to yield a value < @n. */ typedef int user_regset_active_fn(struct task_struct *target, const struct user_regset *regset); typedef int user_regset_get2_fn(struct task_struct *target, const struct user_regset *regset, struct membuf to); /** * user_regset_set_fn - type of @set function in &struct user_regset * @target: thread being examined * @regset: regset being examined * @pos: offset into the regset data to access, in bytes * @count: amount of data to copy, in bytes * @kbuf: if not %NULL, a kernel-space pointer to copy from * @ubuf: if @kbuf is %NULL, a user-space pointer to copy from * * Store register values. Return %0 on success; -%EIO or -%ENODEV * are usual failure returns. The @pos and @count values are in * bytes, but must be properly aligned. If @kbuf is non-null, that * buffer is used and @ubuf is ignored. If @kbuf is %NULL, then * ubuf gives a userland pointer to access directly, and an -%EFAULT * return value is possible. */ typedef int user_regset_set_fn(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, const void *kbuf, const void __user *ubuf); /** * user_regset_writeback_fn - type of @writeback function in &struct user_regset * @target: thread being examined * @regset: regset being examined * @immediate: zero if writeback at completion of next context switch is OK * * This call is optional; usually the pointer is %NULL. When * provided, there is some user memory associated with this regset's * hardware, such as memory backing cached register data on register * window machines; the regset's data controls what user memory is * used (e.g. via the stack pointer value). * * Write register data back to user memory. If the @immediate flag * is nonzero, it must be written to the user memory so uaccess or * access_process_vm() can see it when this call returns; if zero, * then it must be written back by the time the task completes a * context switch (as synchronized with wait_task_inactive()). * Return %0 on success or if there was nothing to do, -%EFAULT for * a memory problem (bad stack pointer or whatever), or -%EIO for a * hardware problem. */ typedef int user_regset_writeback_fn(struct task_struct *target, const struct user_regset *regset, int immediate); /** * struct user_regset - accessible thread CPU state * @n: Number of slots (registers). * @size: Size in bytes of a slot (register). * @align: Required alignment, in bytes. * @bias: Bias from natural indexing. * @core_note_type: ELF note @n_type value used in core dumps. * @get: Function to fetch values. * @set: Function to store values. * @active: Function to report if regset is active, or %NULL. * @writeback: Function to write data back to user memory, or %NULL. * * This data structure describes a machine resource we call a register set. * This is part of the state of an individual thread, not necessarily * actual CPU registers per se. A register set consists of a number of * similar slots, given by @n. Each slot is @size bytes, and aligned to * @align bytes (which is at least @size). For dynamically-sized * regsets, @n must contain the maximum possible number of slots for the * regset. * * For backward compatibility, the @get and @set methods must pad to, or * accept, @n * @size bytes, even if the current regset size is smaller. * The precise semantics of these operations depend on the regset being * accessed. * * The functions to which &struct user_regset members point must be * called only on the current thread or on a thread that is in * %TASK_STOPPED or %TASK_TRACED state, that we are guaranteed will not * be woken up and return to user mode, and that we have called * wait_task_inactive() on. (The target thread always might wake up for * SIGKILL while these functions are working, in which case that * thread's user_regset state might be scrambled.) * * The @pos argument must be aligned according to @align; the @count * argument must be a multiple of @size. These functions are not * responsible for checking for invalid arguments. * * When there is a natural value to use as an index, @bias gives the * difference between the natural index and the slot index for the * register set. For example, x86 GDT segment descriptors form a regset; * the segment selector produces a natural index, but only a subset of * that index space is available as a regset (the TLS slots); subtracting * @bias from a segment selector index value computes the regset slot. * * If nonzero, @core_note_type gives the n_type field (NT_* value) * of the core file note in which this regset's data appears. * NT_PRSTATUS is a special case in that the regset data starts at * offsetof(struct elf_prstatus, pr_reg) into the note data; that is * part of the per-machine ELF formats userland knows about. In * other cases, the core file note contains exactly the whole regset * (@n * @size) and nothing else. The core file note is normally * omitted when there is an @active function and it returns zero. */ struct user_regset { user_regset_get2_fn *regset_get; user_regset_set_fn *set; user_regset_active_fn *active; user_regset_writeback_fn *writeback; unsigned int n; unsigned int size; unsigned int align; unsigned int bias; unsigned int core_note_type; }; /** * struct user_regset_view - available regsets * @name: Identifier, e.g. UTS_MACHINE string. * @regsets: Array of @n regsets available in this view. * @n: Number of elements in @regsets. * @e_machine: ELF header @e_machine %EM_* value written in core dumps. * @e_flags: ELF header @e_flags value written in core dumps. * @ei_osabi: ELF header @e_ident[%EI_OSABI] value written in core dumps. * * A regset view is a collection of regsets (&struct user_regset, * above). This describes all the state of a thread that can be seen * from a given architecture/ABI environment. More than one view might * refer to the same &struct user_regset, or more than one regset * might refer to the same machine-specific state in the thread. For * example, a 32-bit thread's state could be examined from the 32-bit * view or from the 64-bit view. Either method reaches the same thread * register state, doing appropriate widening or truncation. */ struct user_regset_view { const char *name; const struct user_regset *regsets; unsigned int n; u32 e_flags; u16 e_machine; u8 ei_osabi; }; /* * This is documented here rather than at the definition sites because its * implementation is machine-dependent but its interface is universal. */ /** * task_user_regset_view - Return the process's native regset view. * @tsk: a thread of the process in question * * Return the &struct user_regset_view that is native for the given process. * For example, what it would access when it called ptrace(). * Throughout the life of the process, this only changes at exec. */ const struct user_regset_view *task_user_regset_view(struct task_struct *tsk); static inline int user_regset_copyin(unsigned int *pos, unsigned int *count, const void **kbuf, const void __user **ubuf, void *data, const int start_pos, const int end_pos) { if (*count == 0) return 0; BUG_ON(*pos < start_pos); if (end_pos < 0 || *pos < end_pos) { unsigned int copy = (end_pos < 0 ? *count : min(*count, end_pos - *pos)); data += *pos - start_pos; if (*kbuf) { memcpy(data, *kbuf, copy); *kbuf += copy; } else if (__copy_from_user(data, *ubuf, copy)) return -EFAULT; else *ubuf += copy; *pos += copy; *count -= copy; } return 0; } static inline int user_regset_copyin_ignore(unsigned int *pos, unsigned int *count, const void **kbuf, const void __user **ubuf, const int start_pos, const int end_pos) { if (*count == 0) return 0; BUG_ON(*pos < start_pos); if (end_pos < 0 || *pos < end_pos) { unsigned int copy = (end_pos < 0 ? *count : min(*count, end_pos - *pos)); if (*kbuf) *kbuf += copy; else *ubuf += copy; *pos += copy; *count -= copy; } return 0; } extern int regset_get(struct task_struct *target, const struct user_regset *regset, unsigned int size, void *data); extern int regset_get_alloc(struct task_struct *target, const struct user_regset *regset, unsigned int size, void **data); extern int copy_regset_to_user(struct task_struct *target, const struct user_regset_view *view, unsigned int setno, unsigned int offset, unsigned int size, void __user *data); /** * copy_regset_from_user - store into thread's user_regset data from user memory * @target: thread to be examined * @view: &struct user_regset_view describing user thread machine state * @setno: index in @view->regsets * @offset: offset into the regset data, in bytes * @size: amount of data to copy, in bytes * @data: user-mode pointer to copy from */ static inline int copy_regset_from_user(struct task_struct *target, const struct user_regset_view *view, unsigned int setno, unsigned int offset, unsigned int size, const void __user *data) { const struct user_regset *regset = &view->regsets[setno]; if (!regset->set) return -EOPNOTSUPP; if (!access_ok(data, size)) return -EFAULT; return regset->set(target, regset, offset, size, NULL, data); } #endif /* <linux/regset.h> */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_JUMP_LABEL_H #define _LINUX_JUMP_LABEL_H /* * Jump label support * * Copyright (C) 2009-2012 Jason Baron <jbaron@redhat.com> * Copyright (C) 2011-2012 Red Hat, Inc., Peter Zijlstra * * DEPRECATED API: * * The use of 'struct static_key' directly, is now DEPRECATED. In addition * static_key_{true,false}() is also DEPRECATED. IE DO NOT use the following: * * struct static_key false = STATIC_KEY_INIT_FALSE; * struct static_key true = STATIC_KEY_INIT_TRUE; * static_key_true() * static_key_false() * * The updated API replacements are: * * DEFINE_STATIC_KEY_TRUE(key); * DEFINE_STATIC_KEY_FALSE(key); * DEFINE_STATIC_KEY_ARRAY_TRUE(keys, count); * DEFINE_STATIC_KEY_ARRAY_FALSE(keys, count); * static_branch_likely() * static_branch_unlikely() * * Jump labels provide an interface to generate dynamic branches using * self-modifying code. Assuming toolchain and architecture support, if we * define a "key" that is initially false via "DEFINE_STATIC_KEY_FALSE(key)", * an "if (static_branch_unlikely(&key))" statement is an unconditional branch * (which defaults to false - and the true block is placed out of line). * Similarly, we can define an initially true key via * "DEFINE_STATIC_KEY_TRUE(key)", and use it in the same * "if (static_branch_unlikely(&key))", in which case we will generate an * unconditional branch to the out-of-line true branch. Keys that are * initially true or false can be using in both static_branch_unlikely() * and static_branch_likely() statements. * * At runtime we can change the branch target by setting the key * to true via a call to static_branch_enable(), or false using * static_branch_disable(). If the direction of the branch is switched by * these calls then we run-time modify the branch target via a * no-op -> jump or jump -> no-op conversion. For example, for an * initially false key that is used in an "if (static_branch_unlikely(&key))" * statement, setting the key to true requires us to patch in a jump * to the out-of-line of true branch. * * In addition to static_branch_{enable,disable}, we can also reference count * the key or branch direction via static_branch_{inc,dec}. Thus, * static_branch_inc() can be thought of as a 'make more true' and * static_branch_dec() as a 'make more false'. * * Since this relies on modifying code, the branch modifying functions * must be considered absolute slow paths (machine wide synchronization etc.). * OTOH, since the affected branches are unconditional, their runtime overhead * will be absolutely minimal, esp. in the default (off) case where the total * effect is a single NOP of appropriate size. The on case will patch in a jump * to the out-of-line block. * * When the control is directly exposed to userspace, it is prudent to delay the * decrement to avoid high frequency code modifications which can (and do) * cause significant performance degradation. Struct static_key_deferred and * static_key_slow_dec_deferred() provide for this. * * Lacking toolchain and or architecture support, static keys fall back to a * simple conditional branch. * * Additional babbling in: Documentation/staging/static-keys.rst */ #ifndef __ASSEMBLY__ #include <linux/types.h> #include <linux/compiler.h> extern bool static_key_initialized; #define STATIC_KEY_CHECK_USE(key) WARN(!static_key_initialized, \ "%s(): static key '%pS' used before call to jump_label_init()", \ __func__, (key)) #ifdef CONFIG_JUMP_LABEL struct static_key { atomic_t enabled; /* * Note: * To make anonymous unions work with old compilers, the static * initialization of them requires brackets. This creates a dependency * on the order of the struct with the initializers. If any fields * are added, STATIC_KEY_INIT_TRUE and STATIC_KEY_INIT_FALSE may need * to be modified. * * bit 0 => 1 if key is initially true * 0 if initially false * bit 1 => 1 if points to struct static_key_mod * 0 if points to struct jump_entry */ union { unsigned long type; struct jump_entry *entries; struct static_key_mod *next; }; }; #else struct static_key { atomic_t enabled; }; #endif /* CONFIG_JUMP_LABEL */ #endif /* __ASSEMBLY__ */ #ifdef CONFIG_JUMP_LABEL #include <asm/jump_label.h> #ifndef __ASSEMBLY__ #ifdef CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE struct jump_entry { s32 code; s32 target; long key; // key may be far away from the core kernel under KASLR }; static inline unsigned long jump_entry_code(const struct jump_entry *entry) { return (unsigned long)&entry->code + entry->code; } static inline unsigned long jump_entry_target(const struct jump_entry *entry) { return (unsigned long)&entry->target + entry->target; } static inline struct static_key *jump_entry_key(const struct jump_entry *entry) { long offset = entry->key & ~3L; return (struct static_key *)((unsigned long)&entry->key + offset); } #else static inline unsigned long jump_entry_code(const struct jump_entry *entry) { return entry->code; } static inline unsigned long jump_entry_target(const struct jump_entry *entry) { return entry->target; } static inline struct static_key *jump_entry_key(const struct jump_entry *entry) { return (struct static_key *)((unsigned long)entry->key & ~3UL); } #endif static inline bool jump_entry_is_branch(const struct jump_entry *entry) { return (unsigned long)entry->key & 1UL; } static inline bool jump_entry_is_init(const struct jump_entry *entry) { return (unsigned long)entry->key & 2UL; } static inline void jump_entry_set_init(struct jump_entry *entry) { entry->key |= 2; } #endif #endif #ifndef __ASSEMBLY__ enum jump_label_type { JUMP_LABEL_NOP = 0, JUMP_LABEL_JMP, }; struct module; #ifdef CONFIG_JUMP_LABEL #define JUMP_TYPE_FALSE 0UL #define JUMP_TYPE_TRUE 1UL #define JUMP_TYPE_LINKED 2UL #define JUMP_TYPE_MASK 3UL static __always_inline bool static_key_false(struct static_key *key) { return arch_static_branch(key, false); } static __always_inline bool static_key_true(struct static_key *key) { return !arch_static_branch(key, true); } extern struct jump_entry __start___jump_table[]; extern struct jump_entry __stop___jump_table[]; extern void jump_label_init(void); extern void jump_label_lock(void); extern void jump_label_unlock(void); extern void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type); extern void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type); extern bool arch_jump_label_transform_queue(struct jump_entry *entry, enum jump_label_type type); extern void arch_jump_label_transform_apply(void); extern int jump_label_text_reserved(void *start, void *end); extern void static_key_slow_inc(struct static_key *key); extern void static_key_slow_dec(struct static_key *key); extern void static_key_slow_inc_cpuslocked(struct static_key *key); extern void static_key_slow_dec_cpuslocked(struct static_key *key); extern void jump_label_apply_nops(struct module *mod); extern int static_key_count(struct static_key *key); extern void static_key_enable(struct static_key *key); extern void static_key_disable(struct static_key *key); extern void static_key_enable_cpuslocked(struct static_key *key); extern void static_key_disable_cpuslocked(struct static_key *key); /* * We should be using ATOMIC_INIT() for initializing .enabled, but * the inclusion of atomic.h is problematic for inclusion of jump_label.h * in 'low-level' headers. Thus, we are initializing .enabled with a * raw value, but have added a BUILD_BUG_ON() to catch any issues in * jump_label_init() see: kernel/jump_label.c. */ #define STATIC_KEY_INIT_TRUE \ { .enabled = { 1 }, \ { .entries = (void *)JUMP_TYPE_TRUE } } #define STATIC_KEY_INIT_FALSE \ { .enabled = { 0 }, \ { .entries = (void *)JUMP_TYPE_FALSE } } #else /* !CONFIG_JUMP_LABEL */ #include <linux/atomic.h> #include <linux/bug.h> static inline int static_key_count(struct static_key *key) { return atomic_read(&key->enabled); } static __always_inline void jump_label_init(void) { static_key_initialized = true; } static __always_inline bool static_key_false(struct static_key *key) { if (unlikely(static_key_count(key) > 0)) return true; return false; } static __always_inline bool static_key_true(struct static_key *key) { if (likely(static_key_count(key) > 0)) return true; return false; } static inline void static_key_slow_inc(struct static_key *key) { STATIC_KEY_CHECK_USE(key); atomic_inc(&key->enabled); } static inline void static_key_slow_dec(struct static_key *key) { STATIC_KEY_CHECK_USE(key); atomic_dec(&key->enabled); } #define static_key_slow_inc_cpuslocked(key) static_key_slow_inc(key) #define static_key_slow_dec_cpuslocked(key) static_key_slow_dec(key) static inline int jump_label_text_reserved(void *start, void *end) { return 0; } static inline void jump_label_lock(void) {} static inline void jump_label_unlock(void) {} static inline int jump_label_apply_nops(struct module *mod) { return 0; } static inline void static_key_enable(struct static_key *key) { STATIC_KEY_CHECK_USE(key); if (atomic_read(&key->enabled) != 0) { WARN_ON_ONCE(atomic_read(&key->enabled) != 1); return; } atomic_set(&key->enabled, 1); } static inline void static_key_disable(struct static_key *key) { STATIC_KEY_CHECK_USE(key); if (atomic_read(&key->enabled) != 1) { WARN_ON_ONCE(atomic_read(&key->enabled) != 0); return; } atomic_set(&key->enabled, 0); } #define static_key_enable_cpuslocked(k) static_key_enable((k)) #define static_key_disable_cpuslocked(k) static_key_disable((k)) #define STATIC_KEY_INIT_TRUE { .enabled = ATOMIC_INIT(1) } #define STATIC_KEY_INIT_FALSE { .enabled = ATOMIC_INIT(0) } #endif /* CONFIG_JUMP_LABEL */ #define STATIC_KEY_INIT STATIC_KEY_INIT_FALSE #define jump_label_enabled static_key_enabled /* -------------------------------------------------------------------------- */ /* * Two type wrappers around static_key, such that we can use compile time * type differentiation to emit the right code. * * All the below code is macros in order to play type games. */ struct static_key_true { struct static_key key; }; struct static_key_false { struct static_key key; }; #define STATIC_KEY_TRUE_INIT (struct static_key_true) { .key = STATIC_KEY_INIT_TRUE, } #define STATIC_KEY_FALSE_INIT (struct static_key_false){ .key = STATIC_KEY_INIT_FALSE, } #define DEFINE_STATIC_KEY_TRUE(name) \ struct static_key_true name = STATIC_KEY_TRUE_INIT #define DEFINE_STATIC_KEY_TRUE_RO(name) \ struct static_key_true name __ro_after_init = STATIC_KEY_TRUE_INIT #define DECLARE_STATIC_KEY_TRUE(name) \ extern struct static_key_true name #define DEFINE_STATIC_KEY_FALSE(name) \ struct static_key_false name = STATIC_KEY_FALSE_INIT #define DEFINE_STATIC_KEY_FALSE_RO(name) \ struct static_key_false name __ro_after_init = STATIC_KEY_FALSE_INIT #define DECLARE_STATIC_KEY_FALSE(name) \ extern struct static_key_false name #define DEFINE_STATIC_KEY_ARRAY_TRUE(name, count) \ struct static_key_true name[count] = { \ [0 ... (count) - 1] = STATIC_KEY_TRUE_INIT, \ } #define DEFINE_STATIC_KEY_ARRAY_FALSE(name, count) \ struct static_key_false name[count] = { \ [0 ... (count) - 1] = STATIC_KEY_FALSE_INIT, \ } extern bool ____wrong_branch_error(void); #define static_key_enabled(x) \ ({ \ if (!__builtin_types_compatible_p(typeof(*x), struct static_key) && \ !__builtin_types_compatible_p(typeof(*x), struct static_key_true) &&\ !__builtin_types_compatible_p(typeof(*x), struct static_key_false)) \ ____wrong_branch_error(); \ static_key_count((struct static_key *)x) > 0; \ }) #ifdef CONFIG_JUMP_LABEL /* * Combine the right initial value (type) with the right branch order * to generate the desired result. * * * type\branch| likely (1) | unlikely (0) * -----------+-----------------------+------------------ * | | * true (1) | ... | ... * | NOP | JMP L * | <br-stmts> | 1: ... * | L: ... | * | | * | | L: <br-stmts> * | | jmp 1b * | | * -----------+-----------------------+------------------ * | | * false (0) | ... | ... * | JMP L | NOP * | <br-stmts> | 1: ... * | L: ... | * | | * | | L: <br-stmts> * | | jmp 1b * | | * -----------+-----------------------+------------------ * * The initial value is encoded in the LSB of static_key::entries, * type: 0 = false, 1 = true. * * The branch type is encoded in the LSB of jump_entry::key, * branch: 0 = unlikely, 1 = likely. * * This gives the following logic table: * * enabled type branch instuction * -----------------------------+----------- * 0 0 0 | NOP * 0 0 1 | JMP * 0 1 0 | NOP * 0 1 1 | JMP * * 1 0 0 | JMP * 1 0 1 | NOP * 1 1 0 | JMP * 1 1 1 | NOP * * Which gives the following functions: * * dynamic: instruction = enabled ^ branch * static: instruction = type ^ branch * * See jump_label_type() / jump_label_init_type(). */ #define static_branch_likely(x) \ ({ \ bool branch; \ if (__builtin_types_compatible_p(typeof(*x), struct static_key_true)) \ branch = !arch_static_branch(&(x)->key, true); \ else if (__builtin_types_compatible_p(typeof(*x), struct static_key_false)) \ branch = !arch_static_branch_jump(&(x)->key, true); \ else \ branch = ____wrong_branch_error(); \ likely(branch); \ }) #define static_branch_unlikely(x) \ ({ \ bool branch; \ if (__builtin_types_compatible_p(typeof(*x), struct static_key_true)) \ branch = arch_static_branch_jump(&(x)->key, false); \ else if (__builtin_types_compatible_p(typeof(*x), struct static_key_false)) \ branch = arch_static_branch(&(x)->key, false); \ else \ branch = ____wrong_branch_error(); \ unlikely(branch); \ }) #else /* !CONFIG_JUMP_LABEL */ #define static_branch_likely(x) likely(static_key_enabled(&(x)->key)) #define static_branch_unlikely(x) unlikely(static_key_enabled(&(x)->key)) #endif /* CONFIG_JUMP_LABEL */ /* * Advanced usage; refcount, branch is enabled when: count != 0 */ #define static_branch_inc(x) static_key_slow_inc(&(x)->key) #define static_branch_dec(x) static_key_slow_dec(&(x)->key) #define static_branch_inc_cpuslocked(x) static_key_slow_inc_cpuslocked(&(x)->key) #define static_branch_dec_cpuslocked(x) static_key_slow_dec_cpuslocked(&(x)->key) /* * Normal usage; boolean enable/disable. */ #define static_branch_enable(x) static_key_enable(&(x)->key) #define static_branch_disable(x) static_key_disable(&(x)->key) #define static_branch_enable_cpuslocked(x) static_key_enable_cpuslocked(&(x)->key) #define static_branch_disable_cpuslocked(x) static_key_disable_cpuslocked(&(x)->key) #endif /* __ASSEMBLY__ */ #endif /* _LINUX_JUMP_LABEL_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 /* SPDX-License-Identifier: GPL-2.0-or-later */ #ifndef __SOUND_CORE_H #define __SOUND_CORE_H /* * Main header file for the ALSA driver * Copyright (c) 1994-2001 by Jaroslav Kysela <perex@perex.cz> */ #include <linux/device.h> #include <linux/sched.h> /* wake_up() */ #include <linux/mutex.h> /* struct mutex */ #include <linux/rwsem.h> /* struct rw_semaphore */ #include <linux/pm.h> /* pm_message_t */ #include <linux/stringify.h> #include <linux/printk.h> /* number of supported soundcards */ #ifdef CONFIG_SND_DYNAMIC_MINORS #define SNDRV_CARDS CONFIG_SND_MAX_CARDS #else #define SNDRV_CARDS 8 /* don't change - minor numbers */ #endif #define CONFIG_SND_MAJOR 116 /* standard configuration */ /* forward declarations */ struct pci_dev; struct module; struct completion; /* device allocation stuff */ /* type of the object used in snd_device_*() * this also defines the calling order */ enum snd_device_type { SNDRV_DEV_LOWLEVEL, SNDRV_DEV_INFO, SNDRV_DEV_BUS, SNDRV_DEV_CODEC, SNDRV_DEV_PCM, SNDRV_DEV_COMPRESS, SNDRV_DEV_RAWMIDI, SNDRV_DEV_TIMER, SNDRV_DEV_SEQUENCER, SNDRV_DEV_HWDEP, SNDRV_DEV_JACK, SNDRV_DEV_CONTROL, /* NOTE: this must be the last one */ }; enum snd_device_state { SNDRV_DEV_BUILD, SNDRV_DEV_REGISTERED, SNDRV_DEV_DISCONNECTED, }; struct snd_device; struct snd_device_ops { int (*dev_free)(struct snd_device *dev); int (*dev_register)(struct snd_device *dev); int (*dev_disconnect)(struct snd_device *dev); }; struct snd_device { struct list_head list; /* list of registered devices */ struct snd_card *card; /* card which holds this device */ enum snd_device_state state; /* state of the device */ enum snd_device_type type; /* device type */ void *device_data; /* device structure */ const struct snd_device_ops *ops; /* operations */ }; #define snd_device(n) list_entry(n, struct snd_device, list) /* main structure for soundcard */ struct snd_card { int number; /* number of soundcard (index to snd_cards) */ char id[16]; /* id string of this card */ char driver[16]; /* driver name */ char shortname[32]; /* short name of this soundcard */ char longname[80]; /* name of this soundcard */ char irq_descr[32]; /* Interrupt description */ char mixername[80]; /* mixer name */ char components[128]; /* card components delimited with space */ struct module *module; /* top-level module */ void *private_data; /* private data for soundcard */ void (*private_free) (struct snd_card *card); /* callback for freeing of private data */ struct list_head devices; /* devices */ struct device ctl_dev; /* control device */ unsigned int last_numid; /* last used numeric ID */ struct rw_semaphore controls_rwsem; /* controls list lock */ rwlock_t ctl_files_rwlock; /* ctl_files list lock */ int controls_count; /* count of all controls */ int user_ctl_count; /* count of all user controls */ struct list_head controls; /* all controls for this card */ struct list_head ctl_files; /* active control files */ struct snd_info_entry *proc_root; /* root for soundcard specific files */ struct proc_dir_entry *proc_root_link; /* number link to real id */ struct list_head files_list; /* all files associated to this card */ struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown state */ spinlock_t files_lock; /* lock the files for this card */ int shutdown; /* this card is going down */ struct completion *release_completion; struct device *dev; /* device assigned to this card */ struct device card_dev; /* cardX object for sysfs */ const struct attribute_group *dev_groups[4]; /* assigned sysfs attr */ bool registered; /* card_dev is registered? */ int sync_irq; /* assigned irq, used for PCM sync */ wait_queue_head_t remove_sleep; size_t total_pcm_alloc_bytes; /* total amount of allocated buffers */ struct mutex memory_mutex; /* protection for the above */ #ifdef CONFIG_PM unsigned int power_state; /* power state */ wait_queue_head_t power_sleep; #endif #if IS_ENABLED(CONFIG_SND_MIXER_OSS) struct snd_mixer_oss *mixer_oss; int mixer_oss_change_count; #endif }; #define dev_to_snd_card(p) container_of(p, struct snd_card, card_dev) #ifdef CONFIG_PM static inline unsigned int snd_power_get_state(struct snd_card *card) { return card->power_state; } static inline void snd_power_change_state(struct snd_card *card, unsigned int state) { card->power_state = state; wake_up(&card->power_sleep); } /* init.c */ int snd_power_wait(struct snd_card *card, unsigned int power_state); #else /* ! CONFIG_PM */ static inline int snd_power_wait(struct snd_card *card, unsigned int state) { return 0; } #define snd_power_get_state(card) ({ (void)(card); SNDRV_CTL_POWER_D0; }) #define snd_power_change_state(card, state) do { (void)(card); } while (0) #endif /* CONFIG_PM */ struct snd_minor { int type; /* SNDRV_DEVICE_TYPE_XXX */ int card; /* card number */ int device; /* device number */ const struct file_operations *f_ops; /* file operations */ void *private_data; /* private data for f_ops->open */ struct device *dev; /* device for sysfs */ struct snd_card *card_ptr; /* assigned card instance */ }; /* return a device pointer linked to each sound device as a parent */ static inline struct device *snd_card_get_device_link(struct snd_card *card) { return card ? &card->card_dev : NULL; } /* sound.c */ extern int snd_major; extern int snd_ecards_limit; extern struct class *sound_class; void snd_request_card(int card); void snd_device_initialize(struct device *dev, struct snd_card *card); int snd_register_device(int type, struct snd_card *card, int dev, const struct file_operations *f_ops, void *private_data, struct device *device); int snd_unregister_device(struct device *dev); void *snd_lookup_minor_data(unsigned int minor, int type); #ifdef CONFIG_SND_OSSEMUL int snd_register_oss_device(int type, struct snd_card *card, int dev, const struct file_operations *f_ops, void *private_data); int snd_unregister_oss_device(int type, struct snd_card *card, int dev); void *snd_lookup_oss_minor_data(unsigned int minor, int type); #endif int snd_minor_info_init(void); /* sound_oss.c */ #ifdef CONFIG_SND_OSSEMUL int snd_minor_info_oss_init(void); #else static inline int snd_minor_info_oss_init(void) { return 0; } #endif /* memory.c */ int copy_to_user_fromio(void __user *dst, const volatile void __iomem *src, size_t count); int copy_from_user_toio(volatile void __iomem *dst, const void __user *src, size_t count); /* init.c */ int snd_card_locked(int card); #if IS_ENABLED(CONFIG_SND_MIXER_OSS) #define SND_MIXER_OSS_NOTIFY_REGISTER 0 #define SND_MIXER_OSS_NOTIFY_DISCONNECT 1 #define SND_MIXER_OSS_NOTIFY_FREE 2 extern int (*snd_mixer_oss_notify_callback)(struct snd_card *card, int cmd); #endif int snd_card_new(struct device *parent, int idx, const char *xid, struct module *module, int extra_size, struct snd_card **card_ret); int snd_card_disconnect(struct snd_card *card); void snd_card_disconnect_sync(struct snd_card *card); int snd_card_free(struct snd_card *card); int snd_card_free_when_closed(struct snd_card *card); void snd_card_set_id(struct snd_card *card, const char *id); int snd_card_register(struct snd_card *card); int snd_card_info_init(void); int snd_card_add_dev_attr(struct snd_card *card, const struct attribute_group *group); int snd_component_add(struct snd_card *card, const char *component); int snd_card_file_add(struct snd_card *card, struct file *file); int snd_card_file_remove(struct snd_card *card, struct file *file); struct snd_card *snd_card_ref(int card); /** * snd_card_unref - Unreference the card object * @card: the card object to unreference * * Call this function for the card object that was obtained via snd_card_ref() * or snd_lookup_minor_data(). */ static inline void snd_card_unref(struct snd_card *card) { put_device(&card->card_dev); } #define snd_card_set_dev(card, devptr) ((card)->dev = (devptr)) /* device.c */ int snd_device_new(struct snd_card *card, enum snd_device_type type, void *device_data, const struct snd_device_ops *ops); int snd_device_register(struct snd_card *card, void *device_data); int snd_device_register_all(struct snd_card *card); void snd_device_disconnect(struct snd_card *card, void *device_data); void snd_device_disconnect_all(struct snd_card *card); void snd_device_free(struct snd_card *card, void *device_data); void snd_device_free_all(struct snd_card *card); int snd_device_get_state(struct snd_card *card, void *device_data); /* isadma.c */ #ifdef CONFIG_ISA_DMA_API #define DMA_MODE_NO_ENABLE 0x0100 void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode); void snd_dma_disable(unsigned long dma); unsigned int snd_dma_pointer(unsigned long dma, unsigned int size); #endif /* misc.c */ struct resource; void release_and_free_resource(struct resource *res); /* --- */ /* sound printk debug levels */ enum { SND_PR_ALWAYS, SND_PR_DEBUG, SND_PR_VERBOSE, }; #if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK) __printf(4, 5) void __snd_printk(unsigned int level, const char *file, int line, const char *format, ...); #else #define __snd_printk(level, file, line, format, ...) \ printk(format, ##__VA_ARGS__) #endif /** * snd_printk - printk wrapper * @fmt: format string * * Works like printk() but prints the file and the line of the caller * when configured with CONFIG_SND_VERBOSE_PRINTK. */ #define snd_printk(fmt, ...) \ __snd_printk(0, __FILE__, __LINE__, fmt, ##__VA_ARGS__) #ifdef CONFIG_SND_DEBUG /** * snd_printd - debug printk * @fmt: format string * * Works like snd_printk() for debugging purposes. * Ignored when CONFIG_SND_DEBUG is not set. */ #define snd_printd(fmt, ...) \ __snd_printk(1, __FILE__, __LINE__, fmt, ##__VA_ARGS__) #define _snd_printd(level, fmt, ...) \ __snd_printk(level, __FILE__, __LINE__, fmt, ##__VA_ARGS__) /** * snd_BUG - give a BUG warning message and stack trace * * Calls WARN() if CONFIG_SND_DEBUG is set. * Ignored when CONFIG_SND_DEBUG is not set. */ #define snd_BUG() WARN(1, "BUG?\n") /** * snd_printd_ratelimit - Suppress high rates of output when * CONFIG_SND_DEBUG is enabled. */ #define snd_printd_ratelimit() printk_ratelimit() /** * snd_BUG_ON - debugging check macro * @cond: condition to evaluate * * Has the same behavior as WARN_ON when CONFIG_SND_DEBUG is set, * otherwise just evaluates the conditional and returns the value. */ #define snd_BUG_ON(cond) WARN_ON((cond)) #else /* !CONFIG_SND_DEBUG */ __printf(1, 2) static inline void snd_printd(const char *format, ...) {} __printf(2, 3) static inline void _snd_printd(int level, const char *format, ...) {} #define snd_BUG() do { } while (0) #define snd_BUG_ON(condition) ({ \ int __ret_warn_on = !!(condition); \ unlikely(__ret_warn_on); \ }) static inline bool snd_printd_ratelimit(void) { return false; } #endif /* CONFIG_SND_DEBUG */ #ifdef CONFIG_SND_DEBUG_VERBOSE /** * snd_printdd - debug printk * @format: format string * * Works like snd_printk() for debugging purposes. * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set. */ #define snd_printdd(format, ...) \ __snd_printk(2, __FILE__, __LINE__, format, ##__VA_ARGS__) #else __printf(1, 2) static inline void snd_printdd(const char *format, ...) {} #endif #define SNDRV_OSS_VERSION ((3<<16)|(8<<8)|(1<<4)|(0)) /* 3.8.1a */ /* for easier backward-porting */ #if IS_ENABLED(CONFIG_GAMEPORT) #define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev)) #define gameport_set_port_data(gp,r) ((gp)->port_data = (r)) #define gameport_get_port_data(gp) (gp)->port_data #endif /* PCI quirk list helper */ struct snd_pci_quirk { unsigned short subvendor; /* PCI subvendor ID */ unsigned short subdevice; /* PCI subdevice ID */ unsigned short subdevice_mask; /* bitmask to match */ int value; /* value */ #ifdef CONFIG_SND_DEBUG_VERBOSE const char *name; /* name of the device (optional) */ #endif }; #define _SND_PCI_QUIRK_ID_MASK(vend, mask, dev) \ .subvendor = (vend), .subdevice = (dev), .subdevice_mask = (mask) #define _SND_PCI_QUIRK_ID(vend, dev) \ _SND_PCI_QUIRK_ID_MASK(vend, 0xffff, dev) #define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)} #ifdef CONFIG_SND_DEBUG_VERBOSE #define SND_PCI_QUIRK(vend,dev,xname,val) \ {_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)} #define SND_PCI_QUIRK_VENDOR(vend, xname, val) \ {_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val), .name = (xname)} #define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val) \ {_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), \ .value = (val), .name = (xname)} #define snd_pci_quirk_name(q) ((q)->name) #else #define SND_PCI_QUIRK(vend,dev,xname,val) \ {_SND_PCI_QUIRK_ID(vend, dev), .value = (val)} #define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val) \ {_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), .value = (val)} #define SND_PCI_QUIRK_VENDOR(vend, xname, val) \ {_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val)} #define snd_pci_quirk_name(q) "" #endif #ifdef CONFIG_PCI const struct snd_pci_quirk * snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list); const struct snd_pci_quirk * snd_pci_quirk_lookup_id(u16 vendor, u16 device, const struct snd_pci_quirk *list); #else static inline const struct snd_pci_quirk * snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list) { return NULL; } static inline const struct snd_pci_quirk * snd_pci_quirk_lookup_id(u16 vendor, u16 device, const struct snd_pci_quirk *list) { return NULL; } #endif #endif /* __SOUND_CORE_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 /* SPDX-License-Identifier: GPL-2.0 */ /* * include/linux/eventfd.h * * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org> * */ #ifndef _LINUX_EVENTFD_H #define _LINUX_EVENTFD_H #include <linux/fcntl.h> #include <linux/wait.h> #include <linux/err.h> #include <linux/percpu-defs.h> #include <linux/percpu.h> /* * CAREFUL: Check include/uapi/asm-generic/fcntl.h when defining * new flags, since they might collide with O_* ones. We want * to re-use O_* flags that couldn't possibly have a meaning * from eventfd, in order to leave a free define-space for * shared O_* flags. */ #define EFD_SEMAPHORE (1 << 0) #define EFD_CLOEXEC O_CLOEXEC #define EFD_NONBLOCK O_NONBLOCK #define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK) #define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE) struct eventfd_ctx; struct file; #ifdef CONFIG_EVENTFD void eventfd_ctx_put(struct eventfd_ctx *ctx); struct file *eventfd_fget(int fd); struct eventfd_ctx *eventfd_ctx_fdget(int fd); struct eventfd_ctx *eventfd_ctx_fileget(struct file *file); __u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n); int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_entry_t *wait, __u64 *cnt); DECLARE_PER_CPU(int, eventfd_wake_count); static inline bool eventfd_signal_count(void) { return this_cpu_read(eventfd_wake_count); } #else /* CONFIG_EVENTFD */ /* * Ugly ugly ugly error layer to support modules that uses eventfd but * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO. */ static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd) { return ERR_PTR(-ENOSYS); } static inline int eventfd_signal(struct eventfd_ctx *ctx, int n) { return -ENOSYS; } static inline void eventfd_ctx_put(struct eventfd_ctx *ctx) { } static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_entry_t *wait, __u64 *cnt) { return -ENOSYS; } static inline bool eventfd_signal_count(void) { return false; } #endif #endif /* _LINUX_EVENTFD_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * inet6 interface/address list definitions * Linux INET6 implementation * * Authors: * Pedro Roque <roque@di.fc.ul.pt> */ #ifndef _NET_IF_INET6_H #define _NET_IF_INET6_H #include <net/snmp.h> #include <linux/ipv6.h> #include <linux/refcount.h> /* inet6_dev.if_flags */ #define IF_RA_OTHERCONF 0x80 #define IF_RA_MANAGED 0x40 #define IF_RA_RCVD 0x20 #define IF_RS_SENT 0x10 #define IF_READY 0x80000000 /* prefix flags */ #define IF_PREFIX_ONLINK 0x01 #define IF_PREFIX_AUTOCONF 0x02 enum { INET6_IFADDR_STATE_PREDAD, INET6_IFADDR_STATE_DAD, INET6_IFADDR_STATE_POSTDAD, INET6_IFADDR_STATE_ERRDAD, INET6_IFADDR_STATE_DEAD, }; struct inet6_ifaddr { struct in6_addr addr; __u32 prefix_len; __u32 rt_priority; /* In seconds, relative to tstamp. Expiry is at tstamp + HZ * lft. */ __u32 valid_lft; __u32 prefered_lft; refcount_t refcnt; spinlock_t lock; int state; __u32 flags; __u8 dad_probes; __u8 stable_privacy_retry; __u16 scope; __u64 dad_nonce; unsigned long cstamp; /* created timestamp */ unsigned long tstamp; /* updated timestamp */ struct delayed_work dad_work; struct inet6_dev *idev; struct fib6_info *rt; struct hlist_node addr_lst; struct list_head if_list; struct list_head tmp_list; struct inet6_ifaddr *ifpub; int regen_count; bool tokenized; struct rcu_head rcu; struct in6_addr peer_addr; }; struct ip6_sf_socklist { unsigned int sl_max; unsigned int sl_count; struct in6_addr sl_addr[]; }; #define IP6_SFLSIZE(count) (sizeof(struct ip6_sf_socklist) + \ (count) * sizeof(struct in6_addr)) #define IP6_SFBLOCK 10 /* allocate this many at once */ struct ipv6_mc_socklist { struct in6_addr addr; int ifindex; unsigned int sfmode; /* MCAST_{INCLUDE,EXCLUDE} */ struct ipv6_mc_socklist __rcu *next; rwlock_t sflock; struct ip6_sf_socklist *sflist; struct rcu_head rcu; }; struct ip6_sf_list { struct ip6_sf_list *sf_next; struct in6_addr sf_addr; unsigned long sf_count[2]; /* include/exclude counts */ unsigned char sf_gsresp; /* include in g & s response? */ unsigned char sf_oldin; /* change state */ unsigned char sf_crcount; /* retrans. left to send */ }; #define MAF_TIMER_RUNNING 0x01 #define MAF_LAST_REPORTER 0x02 #define MAF_LOADED 0x04 #define MAF_NOREPORT 0x08 #define MAF_GSQUERY 0x10 struct ifmcaddr6 { struct in6_addr mca_addr; struct inet6_dev *idev; struct ifmcaddr6 *next; struct ip6_sf_list *mca_sources; struct ip6_sf_list *mca_tomb; unsigned int mca_sfmode; unsigned char mca_crcount; unsigned long mca_sfcount[2]; struct timer_list mca_timer; unsigned int mca_flags; int mca_users; refcount_t mca_refcnt; spinlock_t mca_lock; unsigned long mca_cstamp; unsigned long mca_tstamp; }; /* Anycast stuff */ struct ipv6_ac_socklist { struct in6_addr acl_addr; int acl_ifindex; struct ipv6_ac_socklist *acl_next; }; struct ifacaddr6 { struct in6_addr aca_addr; struct fib6_info *aca_rt; struct ifacaddr6 *aca_next; struct hlist_node aca_addr_lst; int aca_users; refcount_t aca_refcnt; unsigned long aca_cstamp; unsigned long aca_tstamp; struct rcu_head rcu; }; #define IFA_HOST IPV6_ADDR_LOOPBACK #define IFA_LINK IPV6_ADDR_LINKLOCAL #define IFA_SITE IPV6_ADDR_SITELOCAL struct ipv6_devstat { struct proc_dir_entry *proc_dir_entry; DEFINE_SNMP_STAT(struct ipstats_mib, ipv6); DEFINE_SNMP_STAT_ATOMIC(struct icmpv6_mib_device, icmpv6dev); DEFINE_SNMP_STAT_ATOMIC(struct icmpv6msg_mib_device, icmpv6msgdev); }; struct inet6_dev { struct net_device *dev; struct list_head addr_list; struct ifmcaddr6 *mc_list; struct ifmcaddr6 *mc_tomb; spinlock_t mc_lock; unsigned char mc_qrv; /* Query Robustness Variable */ unsigned char mc_gq_running; unsigned char mc_ifc_count; unsigned char mc_dad_count; unsigned long mc_v1_seen; /* Max time we stay in MLDv1 mode */ unsigned long mc_qi; /* Query Interval */ unsigned long mc_qri; /* Query Response Interval */ unsigned long mc_maxdelay; struct timer_list mc_gq_timer; /* general query timer */ struct timer_list mc_ifc_timer; /* interface change timer */ struct timer_list mc_dad_timer; /* dad complete mc timer */ struct ifacaddr6 *ac_list; rwlock_t lock; refcount_t refcnt; __u32 if_flags; int dead; u32 desync_factor; struct list_head tempaddr_list; struct in6_addr token; struct neigh_parms *nd_parms; struct ipv6_devconf cnf; struct ipv6_devstat stats; struct timer_list rs_timer; __s32 rs_interval; /* in jiffies */ __u8 rs_probes; unsigned long tstamp; /* ipv6InterfaceTable update timestamp */ struct rcu_head rcu; }; static inline void ipv6_eth_mc_map(const struct in6_addr *addr, char *buf) { /* * +-------+-------+-------+-------+-------+-------+ * | 33 | 33 | DST13 | DST14 | DST15 | DST16 | * +-------+-------+-------+-------+-------+-------+ */ buf[0]= 0x33; buf[1]= 0x33; memcpy(buf + 2, &addr->s6_addr32[3], sizeof(__u32)); } static inline void ipv6_arcnet_mc_map(const struct in6_addr *addr, char *buf) { buf[0] = 0x00; } static inline void ipv6_ib_mc_map(const struct in6_addr *addr, const unsigned char *broadcast, char *buf) { unsigned char scope = broadcast[5] & 0xF; buf[0] = 0; /* Reserved */ buf[1] = 0xff; /* Multicast QPN */ buf[2] = 0xff; buf[3] = 0xff; buf[4] = 0xff; buf[5] = 0x10 | scope; /* scope from broadcast address */ buf[6] = 0x60; /* IPv6 signature */ buf[7] = 0x1b; buf[8] = broadcast[8]; /* P_Key */ buf[9] = broadcast[9]; memcpy(buf + 10, addr->s6_addr + 6, 10); } static inline int ipv6_ipgre_mc_map(const struct in6_addr *addr, const unsigned char *broadcast, char *buf) { if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0) { memcpy(buf, broadcast, 4); } else { /* v4mapped? */ if ((addr->s6_addr32[0] | addr->s6_addr32[1] | (addr->s6_addr32[2] ^ htonl(0x0000ffff))) != 0) return -EINVAL; memcpy(buf, &addr->s6_addr32[3], 4); } return 0; } #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 // SPDX-License-Identifier: GPL-2.0 /* * fs/ext4/mballoc.h * * Written by: Alex Tomas <alex@clusterfs.com> * */ #ifndef _EXT4_MBALLOC_H #define _EXT4_MBALLOC_H #include <linux/time.h> #include <linux/fs.h> #include <linux/namei.h> #include <linux/quotaops.h> #include <linux/buffer_head.h> #include <linux/module.h> #include <linux/swap.h> #include <linux/proc_fs.h> #include <linux/pagemap.h> #include <linux/seq_file.h> #include <linux/blkdev.h> #include <linux/mutex.h> #include "ext4_jbd2.h" #include "ext4.h" /* * mb_debug() dynamic printk msgs could be used to debug mballoc code. */ #ifdef CONFIG_EXT4_DEBUG #define mb_debug(sb, fmt, ...) \ pr_debug("[%s/%d] EXT4-fs (%s): (%s, %d): %s: " fmt, \ current->comm, task_pid_nr(current), sb->s_id, \ __FILE__, __LINE__, __func__, ##__VA_ARGS__) #else #define mb_debug(sb, fmt, ...) no_printk(fmt, ##__VA_ARGS__) #endif #define EXT4_MB_HISTORY_ALLOC 1 /* allocation */ #define EXT4_MB_HISTORY_PREALLOC 2 /* preallocated blocks used */ /* * How long mballoc can look for a best extent (in found extents) */ #define MB_DEFAULT_MAX_TO_SCAN 200 /* * How long mballoc must look for a best extent */ #define MB_DEFAULT_MIN_TO_SCAN 10 /* * with 'ext4_mb_stats' allocator will collect stats that will be * shown at umount. The collecting costs though! */ #define MB_DEFAULT_STATS 0 /* * files smaller than MB_DEFAULT_STREAM_THRESHOLD are served * by the stream allocator, which purpose is to pack requests * as close each to other as possible to produce smooth I/O traffic * We use locality group prealloc space for stream request. * We can tune the same via /proc/fs/ext4/<parition>/stream_req */ #define MB_DEFAULT_STREAM_THRESHOLD 16 /* 64K */ /* * for which requests use 2^N search using buddies */ #define MB_DEFAULT_ORDER2_REQS 2 /* * default group prealloc size 512 blocks */ #define MB_DEFAULT_GROUP_PREALLOC 512 /* * maximum length of inode prealloc list */ #define MB_DEFAULT_MAX_INODE_PREALLOC 512 struct ext4_free_data { /* this links the free block information from sb_info */ struct list_head efd_list; /* this links the free block information from group_info */ struct rb_node efd_node; /* group which free block extent belongs */ ext4_group_t efd_group; /* free block extent */ ext4_grpblk_t efd_start_cluster; ext4_grpblk_t efd_count; /* transaction which freed this extent */ tid_t efd_tid; }; struct ext4_prealloc_space { struct list_head pa_inode_list; struct list_head pa_group_list; union { struct list_head pa_tmp_list; struct rcu_head pa_rcu; } u; spinlock_t pa_lock; atomic_t pa_count; unsigned pa_deleted; ext4_fsblk_t pa_pstart; /* phys. block */ ext4_lblk_t pa_lstart; /* log. block */ ext4_grpblk_t pa_len; /* len of preallocated chunk */ ext4_grpblk_t pa_free; /* how many blocks are free */ unsigned short pa_type; /* pa type. inode or group */ spinlock_t *pa_obj_lock; struct inode *pa_inode; /* hack, for history only */ }; enum { MB_INODE_PA = 0, MB_GROUP_PA = 1 }; struct ext4_free_extent { ext4_lblk_t fe_logical; ext4_grpblk_t fe_start; /* In cluster units */ ext4_group_t fe_group; ext4_grpblk_t fe_len; /* In cluster units */ }; /* * Locality group: * we try to group all related changes together * so that writeback can flush/allocate them together as well * Size of lg_prealloc_list hash is determined by MB_DEFAULT_GROUP_PREALLOC * (512). We store prealloc space into the hash based on the pa_free blocks * order value.ie, fls(pa_free)-1; */ #define PREALLOC_TB_SIZE 10 struct ext4_locality_group { /* for allocator */ /* to serialize allocates */ struct mutex lg_mutex; /* list of preallocations */ struct list_head lg_prealloc_list[PREALLOC_TB_SIZE]; spinlock_t lg_prealloc_lock; }; struct ext4_allocation_context { struct inode *ac_inode; struct super_block *ac_sb; /* original request */ struct ext4_free_extent ac_o_ex; /* goal request (normalized ac_o_ex) */ struct ext4_free_extent ac_g_ex; /* the best found extent */ struct ext4_free_extent ac_b_ex; /* copy of the best found extent taken before preallocation efforts */ struct ext4_free_extent ac_f_ex; __u16 ac_groups_scanned; __u16 ac_found; __u16 ac_tail; __u16 ac_buddy; __u16 ac_flags; /* allocation hints */ __u8 ac_status; __u8 ac_criteria; __u8 ac_2order; /* if request is to allocate 2^N blocks and * N > 0, the field stores N, otherwise 0 */ __u8 ac_op; /* operation, for history only */ struct page *ac_bitmap_page; struct page *ac_buddy_page; struct ext4_prealloc_space *ac_pa; struct ext4_locality_group *ac_lg; }; #define AC_STATUS_CONTINUE 1 #define AC_STATUS_FOUND 2 #define AC_STATUS_BREAK 3 struct ext4_buddy { struct page *bd_buddy_page; void *bd_buddy; struct page *bd_bitmap_page; void *bd_bitmap; struct ext4_group_info *bd_info; struct super_block *bd_sb; __u16 bd_blkbits; ext4_group_t bd_group; }; static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb, struct ext4_free_extent *fex) { return ext4_group_first_block_no(sb, fex->fe_group) + (fex->fe_start << EXT4_SB(sb)->s_cluster_bits); } typedef int (*ext4_mballoc_query_range_fn)( struct super_block *sb, ext4_group_t agno, ext4_grpblk_t start, ext4_grpblk_t len, void *priv); int ext4_mballoc_query_range( struct super_block *sb, ext4_group_t agno, ext4_grpblk_t start, ext4_grpblk_t end, ext4_mballoc_query_range_fn formatter, void *priv); #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __NET_RTNETLINK_H #define __NET_RTNETLINK_H #include <linux/rtnetlink.h> #include <net/netlink.h> typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, struct netlink_ext_ack *); typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *); enum rtnl_link_flags { RTNL_FLAG_DOIT_UNLOCKED = 1, }; void rtnl_register(int protocol, int msgtype, rtnl_doit_func, rtnl_dumpit_func, unsigned int flags); int rtnl_register_module(struct module *owner, int protocol, int msgtype, rtnl_doit_func, rtnl_dumpit_func, unsigned int flags); int rtnl_unregister(int protocol, int msgtype); void rtnl_unregister_all(int protocol); static inline int rtnl_msg_family(const struct nlmsghdr *nlh) { if (nlmsg_len(nlh) >= sizeof(struct rtgenmsg)) return ((struct rtgenmsg *) nlmsg_data(nlh))->rtgen_family; else return AF_UNSPEC; } /** * struct rtnl_link_ops - rtnetlink link operations * * @list: Used internally * @kind: Identifier * @netns_refund: Physical device, move to init_net on netns exit * @maxtype: Highest device specific netlink attribute number * @policy: Netlink policy for device specific attribute validation * @validate: Optional validation function for netlink/changelink parameters * @priv_size: sizeof net_device private space * @setup: net_device setup function * @newlink: Function for configuring and registering a new device * @changelink: Function for changing parameters of an existing device * @dellink: Function to remove a device * @get_size: Function to calculate required room for dumping device * specific netlink attributes * @fill_info: Function to dump device specific netlink attributes * @get_xstats_size: Function to calculate required room for dumping device * specific statistics * @fill_xstats: Function to dump device specific statistics * @get_num_tx_queues: Function to determine number of transmit queues * to create when creating a new device. * @get_num_rx_queues: Function to determine number of receive queues * to create when creating a new device. * @get_link_net: Function to get the i/o netns of the device * @get_linkxstats_size: Function to calculate the required room for * dumping device-specific extended link stats * @fill_linkxstats: Function to dump device-specific extended link stats */ struct rtnl_link_ops { struct list_head list; const char *kind; size_t priv_size; void (*setup)(struct net_device *dev); bool netns_refund; unsigned int maxtype; const struct nla_policy *policy; int (*validate)(struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); int (*newlink)(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); int (*changelink)(struct net_device *dev, struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); void (*dellink)(struct net_device *dev, struct list_head *head); size_t (*get_size)(const struct net_device *dev); int (*fill_info)(struct sk_buff *skb, const struct net_device *dev); size_t (*get_xstats_size)(const struct net_device *dev); int (*fill_xstats)(struct sk_buff *skb, const struct net_device *dev); unsigned int (*get_num_tx_queues)(void); unsigned int (*get_num_rx_queues)(void); unsigned int slave_maxtype; const struct nla_policy *slave_policy; int (*slave_changelink)(struct net_device *dev, struct net_device *slave_dev, struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack); size_t (*get_slave_size)(const struct net_device *dev, const struct net_device *slave_dev); int (*fill_slave_info)(struct sk_buff *skb, const struct net_device *dev, const struct net_device *slave_dev); struct net *(*get_link_net)(const struct net_device *dev); size_t (*get_linkxstats_size)(const struct net_device *dev, int attr); int (*fill_linkxstats)(struct sk_buff *skb, const struct net_device *dev, int *prividx, int attr); }; int __rtnl_link_register(struct rtnl_link_ops *ops); void __rtnl_link_unregister(struct rtnl_link_ops *ops); int rtnl_link_register(struct rtnl_link_ops *ops); void rtnl_link_unregister(struct rtnl_link_ops *ops); /** * struct rtnl_af_ops - rtnetlink address family operations * * @list: Used internally * @family: Address family * @fill_link_af: Function to fill IFLA_AF_SPEC with address family * specific netlink attributes. * @get_link_af_size: Function to calculate size of address family specific * netlink attributes. * @validate_link_af: Validate a IFLA_AF_SPEC attribute, must check attr * for invalid configuration settings. * @set_link_af: Function to parse a IFLA_AF_SPEC attribute and modify * net_device accordingly. */ struct rtnl_af_ops { struct list_head list; int family; int (*fill_link_af)(struct sk_buff *skb, const struct net_device *dev, u32 ext_filter_mask); size_t (*get_link_af_size)(const struct net_device *dev, u32 ext_filter_mask); int (*validate_link_af)(const struct net_device *dev, const struct nlattr *attr); int (*set_link_af)(struct net_device *dev, const struct nlattr *attr); int (*fill_stats_af)(struct sk_buff *skb, const struct net_device *dev); size_t (*get_stats_af_size)(const struct net_device *dev); }; void rtnl_af_register(struct rtnl_af_ops *ops); void rtnl_af_unregister(struct rtnl_af_ops *ops); struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]); struct net_device *rtnl_create_link(struct net *net, const char *ifname, unsigned char name_assign_type, const struct rtnl_link_ops *ops, struct nlattr *tb[], struct netlink_ext_ack *extack); int rtnl_delete_link(struct net_device *dev); int rtnl_configure_link(struct net_device *dev, const struct ifinfomsg *ifm); int rtnl_nla_parse_ifla(struct nlattr **tb, const struct nlattr *head, int len, struct netlink_ext_ack *exterr); struct net *rtnl_get_net_ns_capable(struct sock *sk, int netnsid); #define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind) #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_SCHED_SIGNAL_H #define _LINUX_SCHED_SIGNAL_H #include <linux/rculist.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/sched/jobctl.h> #include <linux/sched/task.h> #include <linux/cred.h> #include <linux/refcount.h> #include <linux/posix-timers.h> #include <linux/mm_types.h> #include <asm/ptrace.h> /* * Types defining task->signal and task->sighand and APIs using them: */ struct sighand_struct { spinlock_t siglock; refcount_t count; wait_queue_head_t signalfd_wqh; struct k_sigaction action[_NSIG]; }; /* * Per-process accounting stats: */ struct pacct_struct { int ac_flag; long ac_exitcode; unsigned long ac_mem; u64 ac_utime, ac_stime; unsigned long ac_minflt, ac_majflt; }; struct cpu_itimer { u64 expires; u64 incr; }; /* * This is the atomic variant of task_cputime, which can be used for * storing and updating task_cputime statistics without locking. */ struct task_cputime_atomic { atomic64_t utime; atomic64_t stime; atomic64_t sum_exec_runtime; }; #define INIT_CPUTIME_ATOMIC \ (struct task_cputime_atomic) { \ .utime = ATOMIC64_INIT(0), \ .stime = ATOMIC64_INIT(0), \ .sum_exec_runtime = ATOMIC64_INIT(0), \ } /** * struct thread_group_cputimer - thread group interval timer counts * @cputime_atomic: atomic thread group interval timers. * * This structure contains the version of task_cputime, above, that is * used for thread group CPU timer calculations. */ struct thread_group_cputimer { struct task_cputime_atomic cputime_atomic; }; struct multiprocess_signals { sigset_t signal; struct hlist_node node; }; /* * NOTE! "signal_struct" does not have its own * locking, because a shared signal_struct always * implies a shared sighand_struct, so locking * sighand_struct is always a proper superset of * the locking of signal_struct. */ struct signal_struct { refcount_t sigcnt; atomic_t live; int nr_threads; struct list_head thread_head; wait_queue_head_t wait_chldexit; /* for wait4() */ /* current thread group signal load-balancing target: */ struct task_struct *curr_target; /* shared signal handling: */ struct sigpending shared_pending; /* For collecting multiprocess signals during fork */ struct hlist_head multiprocess; /* thread group exit support */ int group_exit_code; /* overloaded: * - notify group_exit_task when ->count is equal to notify_count * - everyone except group_exit_task is stopped during signal delivery * of fatal signals, group_exit_task processes the signal. */ int notify_count; struct task_struct *group_exit_task; /* thread group stop support, overloads group_exit_code too */ int group_stop_count; unsigned int flags; /* see SIGNAL_* flags below */ /* * PR_SET_CHILD_SUBREAPER marks a process, like a service * manager, to re-parent orphan (double-forking) child processes * to this process instead of 'init'. The service manager is * able to receive SIGCHLD signals and is able to investigate * the process until it calls wait(). All children of this * process will inherit a flag if they should look for a * child_subreaper process at exit. */ unsigned int is_child_subreaper:1; unsigned int has_child_subreaper:1; #ifdef CONFIG_POSIX_TIMERS /* POSIX.1b Interval Timers */ int posix_timer_id; struct list_head posix_timers; /* ITIMER_REAL timer for the process */ struct hrtimer real_timer; ktime_t it_real_incr; /* * ITIMER_PROF and ITIMER_VIRTUAL timers for the process, we use * CPUCLOCK_PROF and CPUCLOCK_VIRT for indexing array as these * values are defined to 0 and 1 respectively */ struct cpu_itimer it[2]; /* * Thread group totals for process CPU timers. * See thread_group_cputimer(), et al, for details. */ struct thread_group_cputimer cputimer; #endif /* Empty if CONFIG_POSIX_TIMERS=n */ struct posix_cputimers posix_cputimers; /* PID/PID hash table linkage. */ struct pid *pids[PIDTYPE_MAX]; #ifdef CONFIG_NO_HZ_FULL atomic_t tick_dep_mask; #endif struct pid *tty_old_pgrp; /* boolean value for session group leader */ int leader; struct tty_struct *tty; /* NULL if no tty */ #ifdef CONFIG_SCHED_AUTOGROUP struct autogroup *autogroup; #endif /* * Cumulative resource counters for dead threads in the group, * and for reaped dead child processes forked by this group. * Live threads maintain their own counters and add to these * in __exit_signal, except for the group leader. */ seqlock_t stats_lock; u64 utime, stime, cutime, cstime; u64 gtime; u64 cgtime; struct prev_cputime prev_cputime; unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw; unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt; unsigned long inblock, oublock, cinblock, coublock; unsigned long maxrss, cmaxrss; struct task_io_accounting ioac; /* * Cumulative ns of schedule CPU time fo dead threads in the * group, not including a zombie group leader, (This only differs * from jiffies_to_ns(utime + stime) if sched_clock uses something * other than jiffies.) */ unsigned long long sum_sched_runtime; /* * We don't bother to synchronize most readers of this at all, * because there is no reader checking a limit that actually needs * to get both rlim_cur and rlim_max atomically, and either one * alone is a single word that can safely be read normally. * getrlimit/setrlimit use task_lock(current->group_leader) to * protect this instead of the siglock, because they really * have no need to disable irqs. */ struct rlimit rlim[RLIM_NLIMITS]; #ifdef CONFIG_BSD_PROCESS_ACCT struct pacct_struct pacct; /* per-process accounting information */ #endif #ifdef CONFIG_TASKSTATS struct taskstats *stats; #endif #ifdef CONFIG_AUDIT unsigned audit_tty; struct tty_audit_buf *tty_audit_buf; #endif /* * Thread is the potential origin of an oom condition; kill first on * oom */ bool oom_flag_origin; short oom_score_adj; /* OOM kill score adjustment */ short oom_score_adj_min; /* OOM kill score adjustment min value. * Only settable by CAP_SYS_RESOURCE. */ struct mm_struct *oom_mm; /* recorded mm when the thread group got * killed by the oom killer */ struct mutex cred_guard_mutex; /* guard against foreign influences on * credential calculations * (notably. ptrace) * Deprecated do not use in new code. * Use exec_update_lock instead. */ struct rw_semaphore exec_update_lock; /* Held while task_struct is * being updated during exec, * and may have inconsistent * permissions. */ } __randomize_layout; /* * Bits in flags field of signal_struct. */ #define SIGNAL_STOP_STOPPED 0x00000001 /* job control stop in effect */ #define SIGNAL_STOP_CONTINUED 0x00000002 /* SIGCONT since WCONTINUED reap */ #define SIGNAL_GROUP_EXIT 0x00000004 /* group exit in progress */ #define SIGNAL_GROUP_COREDUMP 0x00000008 /* coredump in progress */ /* * Pending notifications to parent. */ #define SIGNAL_CLD_STOPPED 0x00000010 #define SIGNAL_CLD_CONTINUED 0x00000020 #define SIGNAL_CLD_MASK (SIGNAL_CLD_STOPPED|SIGNAL_CLD_CONTINUED) #define SIGNAL_UNKILLABLE 0x00000040 /* for init: ignore fatal signals */ #define SIGNAL_STOP_MASK (SIGNAL_CLD_MASK | SIGNAL_STOP_STOPPED | \ SIGNAL_STOP_CONTINUED) static inline void signal_set_stop_flags(struct signal_struct *sig, unsigned int flags) { WARN_ON(sig->flags & (SIGNAL_GROUP_EXIT|SIGNAL_GROUP_COREDUMP)); sig->flags = (sig->flags & ~SIGNAL_STOP_MASK) | flags; } /* If true, all threads except ->group_exit_task have pending SIGKILL */ static inline int signal_group_exit(const struct signal_struct *sig) { return (sig->flags & SIGNAL_GROUP_EXIT) || (sig->group_exit_task != NULL); } extern void flush_signals(struct task_struct *); extern void ignore_signals(struct task_struct *); extern void flush_signal_handlers(struct task_struct *, int force_default); extern int dequeue_signal(struct task_struct *task, sigset_t *mask, kernel_siginfo_t *info); static inline int kernel_dequeue_signal(void) { struct task_struct *task = current; kernel_siginfo_t __info; int ret; spin_lock_irq(&task->sighand->siglock); ret = dequeue_signal(task, &task->blocked, &__info); spin_unlock_irq(&task->sighand->siglock); return ret; } static inline void kernel_signal_stop(void) { spin_lock_irq(&current->sighand->siglock); if (current->jobctl & JOBCTL_STOP_DEQUEUED) set_special_state(TASK_STOPPED); spin_unlock_irq(&current->sighand->siglock); schedule(); } #ifdef __ARCH_SI_TRAPNO # define ___ARCH_SI_TRAPNO(_a1) , _a1 #else # define ___ARCH_SI_TRAPNO(_a1) #endif #ifdef __ia64__ # define ___ARCH_SI_IA64(_a1, _a2, _a3) , _a1, _a2, _a3 #else # define ___ARCH_SI_IA64(_a1, _a2, _a3) #endif int force_sig_fault_to_task(int sig, int code, void __user *addr ___ARCH_SI_TRAPNO(int trapno) ___ARCH_SI_IA64(int imm, unsigned int flags, unsigned long isr) , struct task_struct *t); int force_sig_fault(int sig, int code, void __user *addr ___ARCH_SI_TRAPNO(int trapno) ___ARCH_SI_IA64(int imm, unsigned int flags, unsigned long isr)); int send_sig_fault(int sig, int code, void __user *addr ___ARCH_SI_TRAPNO(int trapno) ___ARCH_SI_IA64(int imm, unsigned int flags, unsigned long isr) , struct task_struct *t); int force_sig_mceerr(int code, void __user *, short); int send_sig_mceerr(int code, void __user *, short, struct task_struct *); int force_sig_bnderr(void __user *addr, void __user *lower, void __user *upper); int force_sig_pkuerr(void __user *addr, u32 pkey); int force_sig_ptrace_errno_trap(int errno, void __user *addr); extern int send_sig_info(int, struct kernel_siginfo *, struct task_struct *); extern void force_sigsegv(int sig); extern int force_sig_info(struct kernel_siginfo *); extern int __kill_pgrp_info(int sig, struct kernel_siginfo *info, struct pid *pgrp); extern int kill_pid_info(int sig, struct kernel_siginfo *info, struct pid *pid); extern int kill_pid_usb_asyncio(int sig, int errno, sigval_t addr, struct pid *, const struct cred *); extern int kill_pgrp(struct pid *pid, int sig, int priv); extern int kill_pid(struct pid *pid, int sig, int priv); extern __must_check bool do_notify_parent(struct task_struct *, int); extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent); extern void force_sig(int); extern int send_sig(int, struct task_struct *, int); extern int zap_other_threads(struct task_struct *p); extern struct sigqueue *sigqueue_alloc(void); extern void sigqueue_free(struct sigqueue *); extern int send_sigqueue(struct sigqueue *, struct pid *, enum pid_type); extern int do_sigaction(int, struct k_sigaction *, struct k_sigaction *); static inline int restart_syscall(void) { set_tsk_thread_flag(current, TIF_SIGPENDING); return -ERESTARTNOINTR; } static inline int signal_pending(struct task_struct *p) { return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); } static inline int __fatal_signal_pending(struct task_struct *p) { return unlikely(sigismember(&p->pending.signal, SIGKILL)); } static inline int fatal_signal_pending(struct task_struct *p) { return signal_pending(p) && __fatal_signal_pending(p); } static inline int signal_pending_state(long state, struct task_struct *p) { if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL))) return 0; if (!signal_pending(p)) return 0; return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); } /* * This should only be used in fault handlers to decide whether we * should stop the current fault routine to handle the signals * instead, especially with the case where we've got interrupted with * a VM_FAULT_RETRY. */ static inline bool fault_signal_pending(vm_fault_t fault_flags, struct pt_regs *regs) { return unlikely((fault_flags & VM_FAULT_RETRY) && (fatal_signal_pending(current) || (user_mode(regs) && signal_pending(current)))); } /* * Reevaluate whether the task has signals pending delivery. * Wake the task if so. * This is required every time the blocked sigset_t changes. * callers must hold sighand->siglock. */ extern void recalc_sigpending_and_wake(struct task_struct *t); extern void recalc_sigpending(void); extern void calculate_sigpending(void); extern void signal_wake_up_state(struct task_struct *t, unsigned int state); static inline void signal_wake_up(struct task_struct *t, bool resume) { signal_wake_up_state(t, resume ? TASK_WAKEKILL : 0); } static inline void ptrace_signal_wake_up(struct task_struct *t, bool resume) { signal_wake_up_state(t, resume ? __TASK_TRACED : 0); } void task_join_group_stop(struct task_struct *task); #ifdef TIF_RESTORE_SIGMASK /* * Legacy restore_sigmask accessors. These are inefficient on * SMP architectures because they require atomic operations. */ /** * set_restore_sigmask() - make sure saved_sigmask processing gets done * * This sets TIF_RESTORE_SIGMASK and ensures that the arch signal code * will run before returning to user mode, to process the flag. For * all callers, TIF_SIGPENDING is already set or it's no harm to set * it. TIF_RESTORE_SIGMASK need not be in the set of bits that the * arch code will notice on return to user mode, in case those bits * are scarce. We set TIF_SIGPENDING here to ensure that the arch * signal code always gets run when TIF_RESTORE_SIGMASK is set. */ static inline void set_restore_sigmask(void) { set_thread_flag(TIF_RESTORE_SIGMASK); } static inline void clear_tsk_restore_sigmask(struct task_struct *task) { clear_tsk_thread_flag(task, TIF_RESTORE_SIGMASK); } static inline void clear_restore_sigmask(void) { clear_thread_flag(TIF_RESTORE_SIGMASK); } static inline bool test_tsk_restore_sigmask(struct task_struct *task) { return test_tsk_thread_flag(task, TIF_RESTORE_SIGMASK); } static inline bool test_restore_sigmask(void) { return test_thread_flag(TIF_RESTORE_SIGMASK); } static inline bool test_and_clear_restore_sigmask(void) { return test_and_clear_thread_flag(TIF_RESTORE_SIGMASK); } #else /* TIF_RESTORE_SIGMASK */ /* Higher-quality implementation, used if TIF_RESTORE_SIGMASK doesn't exist. */ static inline void set_restore_sigmask(void) { current->restore_sigmask = true; } static inline void clear_tsk_restore_sigmask(struct task_struct *task) { task->restore_sigmask = false; } static inline void clear_restore_sigmask(void) { current->restore_sigmask = false; } static inline bool test_restore_sigmask(void) { return current->restore_sigmask; } static inline bool test_tsk_restore_sigmask(struct task_struct *task) { return task->restore_sigmask; } static inline bool test_and_clear_restore_sigmask(void) { if (!current->restore_sigmask) return false; current->restore_sigmask = false; return true; } #endif static inline void restore_saved_sigmask(void) { if (test_and_clear_restore_sigmask()) __set_current_blocked(&current->saved_sigmask); } extern int set_user_sigmask(const sigset_t __user *umask, size_t sigsetsize); static inline void restore_saved_sigmask_unless(bool interrupted) { if (interrupted) WARN_ON(!test_thread_flag(TIF_SIGPENDING)); else restore_saved_sigmask(); } static inline sigset_t *sigmask_to_save(void) { sigset_t *res = &current->blocked; if (unlikely(test_restore_sigmask())) res = &current->saved_sigmask; return res; } static inline int kill_cad_pid(int sig, int priv) { return kill_pid(cad_pid, sig, priv); } /* These can be the second arg to send_sig_info/send_group_sig_info. */ #define SEND_SIG_NOINFO ((struct kernel_siginfo *) 0) #define SEND_SIG_PRIV ((struct kernel_siginfo *) 1) static inline int __on_sig_stack(unsigned long sp) { #ifdef CONFIG_STACK_GROWSUP return sp >= current->sas_ss_sp && sp - current->sas_ss_sp < current->sas_ss_size; #else return sp > current->sas_ss_sp && sp - current->sas_ss_sp <= current->sas_ss_size; #endif } /* * True if we are on the alternate signal stack. */ static inline int on_sig_stack(unsigned long sp) { /* * If the signal stack is SS_AUTODISARM then, by construction, we * can't be on the signal stack unless user code deliberately set * SS_AUTODISARM when we were already on it. * * This improves reliability: if user state gets corrupted such that * the stack pointer points very close to the end of the signal stack, * then this check will enable the signal to be handled anyway. */ if (current->sas_ss_flags & SS_AUTODISARM) return 0; return __on_sig_stack(sp); } static inline int sas_ss_flags(unsigned long sp) { if (!current->sas_ss_size) return SS_DISABLE; return on_sig_stack(sp) ? SS_ONSTACK : 0; } static inline void sas_ss_reset(struct task_struct *p) { p->sas_ss_sp = 0; p->sas_ss_size = 0; p->sas_ss_flags = SS_DISABLE; } static inline unsigned long sigsp(unsigned long sp, struct ksignal *ksig) { if (unlikely((ksig->ka.sa.sa_flags & SA_ONSTACK)) && ! sas_ss_flags(sp)) #ifdef CONFIG_STACK_GROWSUP return current->sas_ss_sp; #else return current->sas_ss_sp + current->sas_ss_size; #endif return sp; } extern void __cleanup_sighand(struct sighand_struct *); extern void flush_itimer_signals(void); #define tasklist_empty() \ list_empty(&init_task.tasks) #define next_task(p) \ list_entry_rcu((p)->tasks.next, struct task_struct, tasks) #define for_each_process(p) \ for (p = &init_task ; (p = next_task(p)) != &init_task ; ) extern bool current_is_single_threaded(void); /* * Careful: do_each_thread/while_each_thread is a double loop so * 'break' will not work as expected - use goto instead. */ #define do_each_thread(g, t) \ for (g = t = &init_task ; (g = t = next_task(g)) != &init_task ; ) do #define while_each_thread(g, t) \ while ((t = next_thread(t)) != g) #define __for_each_thread(signal, t) \ list_for_each_entry_rcu(t, &(signal)->thread_head, thread_node) #define for_each_thread(p, t) \ __for_each_thread((p)->signal, t) /* Careful: this is a double loop, 'break' won't work as expected. */ #define for_each_process_thread(p, t) \ for_each_process(p) for_each_thread(p, t) typedef int (*proc_visitor)(struct task_struct *p, void *data); void walk_process_tree(struct task_struct *top, proc_visitor, void *); static inline struct pid *task_pid_type(struct task_struct *task, enum pid_type type) { struct pid *pid; if (type == PIDTYPE_PID) pid = task_pid(task); else pid = task->signal->pids[type]; return pid; } static inline struct pid *task_tgid(struct task_struct *task) { return task->signal->pids[PIDTYPE_TGID]; } /* * Without tasklist or RCU lock it is not safe to dereference * the result of task_pgrp/task_session even if task == current, * we can race with another thread doing sys_setsid/sys_setpgid. */ static inline struct pid *task_pgrp(struct task_struct *task) { return task->signal->pids[PIDTYPE_PGID]; } static inline struct pid *task_session(struct task_struct *task) { return task->signal->pids[PIDTYPE_SID]; } static inline int get_nr_threads(struct task_struct *task) { return task->signal->nr_threads; } static inline bool thread_group_leader(struct task_struct *p) { return p->exit_signal >= 0; } static inline bool same_thread_group(struct task_struct *p1, struct task_struct *p2) { return p1->signal == p2->signal; } static inline struct task_struct *next_thread(const struct task_struct *p) { return list_entry_rcu(p->thread_group.next, struct task_struct, thread_group); } static inline int thread_group_empty(struct task_struct *p) { return list_empty(&p->thread_group); } #define delay_group_leader(p) \ (thread_group_leader(p) && !thread_group_empty(p)) extern bool thread_group_exited(struct pid *pid); extern struct sighand_struct *__lock_task_sighand(struct task_struct *task, unsigned long *flags); static inline struct sighand_struct *lock_task_sighand(struct task_struct *task, unsigned long *flags) { struct sighand_struct *ret; ret = __lock_task_sighand(task, flags); (void)__cond_lock(&task->sighand->siglock, ret); return ret; } static inline void unlock_task_sighand(struct task_struct *task, unsigned long *flags) { spin_unlock_irqrestore(&task->sighand->siglock, *flags); } static inline unsigned long task_rlimit(const struct task_struct *task, unsigned int limit) { return READ_ONCE(task->signal->rlim[limit].rlim_cur); } static inline unsigned long task_rlimit_max(const struct task_struct *task, unsigned int limit) { return READ_ONCE(task->signal->rlim[limit].rlim_max); } static inline unsigned long rlimit(unsigned int limit) { return task_rlimit(current, limit); } static inline unsigned long rlimit_max(unsigned int limit) { return task_rlimit_max(current, limit); } #endif /* _LINUX_SCHED_SIGNAL_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __LINUX_SEQLOCK_H #define __LINUX_SEQLOCK_H /* * seqcount_t / seqlock_t - a reader-writer consistency mechanism with * lockless readers (read-only retry loops), and no writer starvation. * * See Documentation/locking/seqlock.rst * * Copyrights: * - Based on x86_64 vsyscall gettimeofday: Keith Owens, Andrea Arcangeli * - Sequence counters with associated locks, (C) 2020 Linutronix GmbH */ #include <linux/compiler.h> #include <linux/kcsan-checks.h> #include <linux/lockdep.h> #include <linux/mutex.h> #include <linux/ww_mutex.h> #include <linux/preempt.h> #include <linux/spinlock.h> #include <asm/processor.h> /* * The seqlock seqcount_t interface does not prescribe a precise sequence of * read begin/retry/end. For readers, typically there is a call to * read_seqcount_begin() and read_seqcount_retry(), however, there are more * esoteric cases which do not follow this pattern. * * As a consequence, we take the following best-effort approach for raw usage * via seqcount_t under KCSAN: upon beginning a seq-reader critical section, * pessimistically mark the next KCSAN_SEQLOCK_REGION_MAX memory accesses as * atomics; if there is a matching read_seqcount_retry() call, no following * memory operations are considered atomic. Usage of the seqlock_t interface * is not affected. */ #define KCSAN_SEQLOCK_REGION_MAX 1000 /* * Sequence counters (seqcount_t) * * This is the raw counting mechanism, without any writer protection. * * Write side critical sections must be serialized and non-preemptible. * * If readers can be invoked from hardirq or softirq contexts, * interrupts or bottom halves must also be respectively disabled before * entering the write section. * * This mechanism can't be used if the protected data contains pointers, * as the writer can invalidate a pointer that a reader is following. * * If the write serialization mechanism is one of the common kernel * locking primitives, use a sequence counter with associated lock * (seqcount_LOCKNAME_t) instead. * * If it's desired to automatically handle the sequence counter writer * serialization and non-preemptibility requirements, use a sequential * lock (seqlock_t) instead. * * See Documentation/locking/seqlock.rst */ typedef struct seqcount { unsigned sequence; #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; #endif } seqcount_t; static inline void __seqcount_init(seqcount_t *s, const char *name, struct lock_class_key *key) { /* * Make sure we are not reinitializing a held lock: */ lockdep_init_map(&s->dep_map, name, key, 0); s->sequence = 0; } #ifdef CONFIG_DEBUG_LOCK_ALLOC # define SEQCOUNT_DEP_MAP_INIT(lockname) \ .dep_map = { .name = #lockname } /** * seqcount_init() - runtime initializer for seqcount_t * @s: Pointer to the seqcount_t instance */ # define seqcount_init(s) \ do { \ static struct lock_class_key __key; \ __seqcount_init((s), #s, &__key); \ } while (0) static inline void seqcount_lockdep_reader_access(const seqcount_t *s) { seqcount_t *l = (seqcount_t *)s; unsigned long flags; local_irq_save(flags); seqcount_acquire_read(&l->dep_map, 0, 0, _RET_IP_); seqcount_release(&l->dep_map, _RET_IP_); local_irq_restore(flags); } #else # define SEQCOUNT_DEP_MAP_INIT(lockname) # define seqcount_init(s) __seqcount_init(s, NULL, NULL) # define seqcount_lockdep_reader_access(x) #endif /** * SEQCNT_ZERO() - static initializer for seqcount_t * @name: Name of the seqcount_t instance */ #define SEQCNT_ZERO(name) { .sequence = 0, SEQCOUNT_DEP_MAP_INIT(name) } /* * Sequence counters with associated locks (seqcount_LOCKNAME_t) * * A sequence counter which associates the lock used for writer * serialization at initialization time. This enables lockdep to validate * that the write side critical section is properly serialized. * * For associated locks which do not implicitly disable preemption, * preemption protection is enforced in the write side function. * * Lockdep is never used in any for the raw write variants. * * See Documentation/locking/seqlock.rst */ /* * For PREEMPT_RT, seqcount_LOCKNAME_t write side critical sections cannot * disable preemption. It can lead to higher latencies, and the write side * sections will not be able to acquire locks which become sleeping locks * (e.g. spinlock_t). * * To remain preemptible while avoiding a possible livelock caused by the * reader preempting the writer, use a different technique: let the reader * detect if a seqcount_LOCKNAME_t writer is in progress. If that is the * case, acquire then release the associated LOCKNAME writer serialization * lock. This will allow any possibly-preempted writer to make progress * until the end of its writer serialization lock critical section. * * This lock-unlock technique must be implemented for all of PREEMPT_RT * sleeping locks. See Documentation/locking/locktypes.rst */ #if defined(CONFIG_LOCKDEP) || defined(CONFIG_PREEMPT_RT) #define __SEQ_LOCK(expr) expr #else #define __SEQ_LOCK(expr) #endif /* * typedef seqcount_LOCKNAME_t - sequence counter with LOCKNAME associated * @seqcount: The real sequence counter * @lock: Pointer to the associated lock * * A plain sequence counter with external writer synchronization by * LOCKNAME @lock. The lock is associated to the sequence counter in the * static initializer or init function. This enables lockdep to validate * that the write side critical section is properly serialized. * * LOCKNAME: raw_spinlock, spinlock, rwlock, mutex, or ww_mutex. */ /* * seqcount_LOCKNAME_init() - runtime initializer for seqcount_LOCKNAME_t * @s: Pointer to the seqcount_LOCKNAME_t instance * @lock: Pointer to the associated lock */ #define seqcount_LOCKNAME_init(s, _lock, lockname) \ do { \ seqcount_##lockname##_t *____s = (s); \ seqcount_init(&____s->seqcount); \ __SEQ_LOCK(____s->lock = (_lock)); \ } while (0) #define seqcount_raw_spinlock_init(s, lock) seqcount_LOCKNAME_init(s, lock, raw_spinlock) #define seqcount_spinlock_init(s, lock) seqcount_LOCKNAME_init(s, lock, spinlock) #define seqcount_rwlock_init(s, lock) seqcount_LOCKNAME_init(s, lock, rwlock); #define seqcount_mutex_init(s, lock) seqcount_LOCKNAME_init(s, lock, mutex); #define seqcount_ww_mutex_init(s, lock) seqcount_LOCKNAME_init(s, lock, ww_mutex); /* * SEQCOUNT_LOCKNAME() - Instantiate seqcount_LOCKNAME_t and helpers * seqprop_LOCKNAME_*() - Property accessors for seqcount_LOCKNAME_t * * @lockname: "LOCKNAME" part of seqcount_LOCKNAME_t * @locktype: LOCKNAME canonical C data type * @preemptible: preemptibility of above locktype * @lockmember: argument for lockdep_assert_held() * @lockbase: associated lock release function (prefix only) * @lock_acquire: associated lock acquisition function (full call) */ #define SEQCOUNT_LOCKNAME(lockname, locktype, preemptible, lockmember, lockbase, lock_acquire) \ typedef struct seqcount_##lockname { \ seqcount_t seqcount; \ __SEQ_LOCK(locktype *lock); \ } seqcount_##lockname##_t; \ \ static __always_inline seqcount_t * \ __seqprop_##lockname##_ptr(seqcount_##lockname##_t *s) \ { \ return &s->seqcount; \ } \ \ static __always_inline unsigned \ __seqprop_##lockname##_sequence(const seqcount_##lockname##_t *s) \ { \ unsigned seq = READ_ONCE(s->seqcount.sequence); \ \ if (!IS_ENABLED(CONFIG_PREEMPT_RT)) \ return seq; \ \ if (preemptible && unlikely(seq & 1)) { \ __SEQ_LOCK(lock_acquire); \ __SEQ_LOCK(lockbase##_unlock(s->lock)); \ \ /* \ * Re-read the sequence counter since the (possibly \ * preempted) writer made progress. \ */ \ seq = READ_ONCE(s->seqcount.sequence); \ } \ \ return seq; \ } \ \ static __always_inline bool \ __seqprop_##lockname##_preemptible(const seqcount_##lockname##_t *s) \ { \ if (!IS_ENABLED(CONFIG_PREEMPT_RT)) \ return preemptible; \ \ /* PREEMPT_RT relies on the above LOCK+UNLOCK */ \ return false; \ } \ \ static __always_inline void \ __seqprop_##lockname##_assert(const seqcount_##lockname##_t *s) \ { \ __SEQ_LOCK(lockdep_assert_held(lockmember)); \ } /* * __seqprop() for seqcount_t */ static inline seqcount_t *__seqprop_ptr(seqcount_t *s) { return s; } static inline unsigned __seqprop_sequence(const seqcount_t *s) { return READ_ONCE(s->sequence); } static inline bool __seqprop_preemptible(const seqcount_t *s) { return false; } static inline void __seqprop_assert(const seqcount_t *s) { lockdep_assert_preemption_disabled(); } #define __SEQ_RT IS_ENABLED(CONFIG_PREEMPT_RT) SEQCOUNT_LOCKNAME(raw_spinlock, raw_spinlock_t, false, s->lock, raw_spin, raw_spin_lock(s->lock)) SEQCOUNT_LOCKNAME(spinlock, spinlock_t, __SEQ_RT, s->lock, spin, spin_lock(s->lock)) SEQCOUNT_LOCKNAME(rwlock, rwlock_t, __SEQ_RT, s->lock, read, read_lock(s->lock)) SEQCOUNT_LOCKNAME(mutex, struct mutex, true, s->lock, mutex, mutex_lock(s->lock)) SEQCOUNT_LOCKNAME(ww_mutex, struct ww_mutex, true, &s->lock->base, ww_mutex, ww_mutex_lock(s->lock, NULL)) /* * SEQCNT_LOCKNAME_ZERO - static initializer for seqcount_LOCKNAME_t * @name: Name of the seqcount_LOCKNAME_t instance * @lock: Pointer to the associated LOCKNAME */ #define SEQCOUNT_LOCKNAME_ZERO(seq_name, assoc_lock) { \ .seqcount = SEQCNT_ZERO(seq_name.seqcount), \ __SEQ_LOCK(.lock = (assoc_lock)) \ } #define SEQCNT_RAW_SPINLOCK_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock) #define SEQCNT_SPINLOCK_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock) #define SEQCNT_RWLOCK_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock) #define SEQCNT_MUTEX_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock) #define SEQCNT_WW_MUTEX_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock) #define __seqprop_case(s, lockname, prop) \ seqcount_##lockname##_t: __seqprop_##lockname##_##prop((void *)(s)) #define __seqprop(s, prop) _Generic(*(s), \ seqcount_t: __seqprop_##prop((void *)(s)), \ __seqprop_case((s), raw_spinlock, prop), \ __seqprop_case((s), spinlock, prop), \ __seqprop_case((s), rwlock, prop), \ __seqprop_case((s), mutex, prop), \ __seqprop_case((s), ww_mutex, prop)) #define __seqcount_ptr(s) __seqprop(s, ptr) #define __seqcount_sequence(s) __seqprop(s, sequence) #define __seqcount_lock_preemptible(s) __seqprop(s, preemptible) #define __seqcount_assert_lock_held(s) __seqprop(s, assert) /** * __read_seqcount_begin() - begin a seqcount_t read section w/o barrier * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb() * barrier. Callers should ensure that smp_rmb() or equivalent ordering is * provided before actually loading any of the variables that are to be * protected in this critical section. * * Use carefully, only in critical code, and comment how the barrier is * provided. * * Return: count to be passed to read_seqcount_retry() */ #define __read_seqcount_begin(s) \ ({ \ unsigned seq; \ \ while ((seq = __seqcount_sequence(s)) & 1) \ cpu_relax(); \ \ kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX); \ seq; \ }) /** * raw_read_seqcount_begin() - begin a seqcount_t read section w/o lockdep * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * Return: count to be passed to read_seqcount_retry() */ #define raw_read_seqcount_begin(s) \ ({ \ unsigned seq = __read_seqcount_begin(s); \ \ smp_rmb(); \ seq; \ }) /** * read_seqcount_begin() - begin a seqcount_t read critical section * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * Return: count to be passed to read_seqcount_retry() */ #define read_seqcount_begin(s) \ ({ \ seqcount_lockdep_reader_access(__seqcount_ptr(s)); \ raw_read_seqcount_begin(s); \ }) /** * raw_read_seqcount() - read the raw seqcount_t counter value * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * raw_read_seqcount opens a read critical section of the given * seqcount_t, without any lockdep checking, and without checking or * masking the sequence counter LSB. Calling code is responsible for * handling that. * * Return: count to be passed to read_seqcount_retry() */ #define raw_read_seqcount(s) \ ({ \ unsigned seq = __seqcount_sequence(s); \ \ smp_rmb(); \ kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX); \ seq; \ }) /** * raw_seqcount_begin() - begin a seqcount_t read critical section w/o * lockdep and w/o counter stabilization * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * raw_seqcount_begin opens a read critical section of the given * seqcount_t. Unlike read_seqcount_begin(), this function will not wait * for the count to stabilize. If a writer is active when it begins, it * will fail the read_seqcount_retry() at the end of the read critical * section instead of stabilizing at the beginning of it. * * Use this only in special kernel hot paths where the read section is * small and has a high probability of success through other external * means. It will save a single branching instruction. * * Return: count to be passed to read_seqcount_retry() */ #define raw_seqcount_begin(s) \ ({ \ /* \ * If the counter is odd, let read_seqcount_retry() fail \ * by decrementing the counter. \ */ \ raw_read_seqcount(s) & ~1; \ }) /** * __read_seqcount_retry() - end a seqcount_t read section w/o barrier * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * @start: count, from read_seqcount_begin() * * __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb() * barrier. Callers should ensure that smp_rmb() or equivalent ordering is * provided before actually loading any of the variables that are to be * protected in this critical section. * * Use carefully, only in critical code, and comment how the barrier is * provided. * * Return: true if a read section retry is required, else false */ #define __read_seqcount_retry(s, start) \ __read_seqcount_t_retry(__seqcount_ptr(s), start) static inline int __read_seqcount_t_retry(const seqcount_t *s, unsigned start) { kcsan_atomic_next(0); return unlikely(READ_ONCE(s->sequence) != start); } /** * read_seqcount_retry() - end a seqcount_t read critical section * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * @start: count, from read_seqcount_begin() * * read_seqcount_retry closes the read critical section of given * seqcount_t. If the critical section was invalid, it must be ignored * (and typically retried). * * Return: true if a read section retry is required, else false */ #define read_seqcount_retry(s, start) \ read_seqcount_t_retry(__seqcount_ptr(s), start) static inline int read_seqcount_t_retry(const seqcount_t *s, unsigned start) { smp_rmb(); return __read_seqcount_t_retry(s, start); } /** * raw_write_seqcount_begin() - start a seqcount_t write section w/o lockdep * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants */ #define raw_write_seqcount_begin(s) \ do { \ if (__seqcount_lock_preemptible(s)) \ preempt_disable(); \ \ raw_write_seqcount_t_begin(__seqcount_ptr(s)); \ } while (0) static inline void raw_write_seqcount_t_begin(seqcount_t *s) { kcsan_nestable_atomic_begin(); s->sequence++; smp_wmb(); } /** * raw_write_seqcount_end() - end a seqcount_t write section w/o lockdep * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants */ #define raw_write_seqcount_end(s) \ do { \ raw_write_seqcount_t_end(__seqcount_ptr(s)); \ \ if (__seqcount_lock_preemptible(s)) \ preempt_enable(); \ } while (0) static inline void raw_write_seqcount_t_end(seqcount_t *s) { smp_wmb(); s->sequence++; kcsan_nestable_atomic_end(); } /** * write_seqcount_begin_nested() - start a seqcount_t write section with * custom lockdep nesting level * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * @subclass: lockdep nesting level * * See Documentation/locking/lockdep-design.rst */ #define write_seqcount_begin_nested(s, subclass) \ do { \ __seqcount_assert_lock_held(s); \ \ if (__seqcount_lock_preemptible(s)) \ preempt_disable(); \ \ write_seqcount_t_begin_nested(__seqcount_ptr(s), subclass); \ } while (0) static inline void write_seqcount_t_begin_nested(seqcount_t *s, int subclass) { raw_write_seqcount_t_begin(s); seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_); } /** * write_seqcount_begin() - start a seqcount_t write side critical section * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * write_seqcount_begin opens a write side critical section of the given * seqcount_t. * * Context: seqcount_t write side critical sections must be serialized and * non-preemptible. If readers can be invoked from hardirq or softirq * context, interrupts or bottom halves must be respectively disabled. */ #define write_seqcount_begin(s) \ do { \ __seqcount_assert_lock_held(s); \ \ if (__seqcount_lock_preemptible(s)) \ preempt_disable(); \ \ write_seqcount_t_begin(__seqcount_ptr(s)); \ } while (0) static inline void write_seqcount_t_begin(seqcount_t *s) { write_seqcount_t_begin_nested(s, 0); } /** * write_seqcount_end() - end a seqcount_t write side critical section * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * The write section must've been opened with write_seqcount_begin(). */ #define write_seqcount_end(s) \ do { \ write_seqcount_t_end(__seqcount_ptr(s)); \ \ if (__seqcount_lock_preemptible(s)) \ preempt_enable(); \ } while (0) static inline void write_seqcount_t_end(seqcount_t *s) { seqcount_release(&s->dep_map, _RET_IP_); raw_write_seqcount_t_end(s); } /** * raw_write_seqcount_barrier() - do a seqcount_t write barrier * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * This can be used to provide an ordering guarantee instead of the usual * consistency guarantee. It is one wmb cheaper, because it can collapse * the two back-to-back wmb()s. * * Note that writes surrounding the barrier should be declared atomic (e.g. * via WRITE_ONCE): a) to ensure the writes become visible to other threads * atomically, avoiding compiler optimizations; b) to document which writes are * meant to propagate to the reader critical section. This is necessary because * neither writes before and after the barrier are enclosed in a seq-writer * critical section that would ensure readers are aware of ongoing writes:: * * seqcount_t seq; * bool X = true, Y = false; * * void read(void) * { * bool x, y; * * do { * int s = read_seqcount_begin(&seq); * * x = X; y = Y; * * } while (read_seqcount_retry(&seq, s)); * * BUG_ON(!x && !y); * } * * void write(void) * { * WRITE_ONCE(Y, true); * * raw_write_seqcount_barrier(seq); * * WRITE_ONCE(X, false); * } */ #define raw_write_seqcount_barrier(s) \ raw_write_seqcount_t_barrier(__seqcount_ptr(s)) static inline void raw_write_seqcount_t_barrier(seqcount_t *s) { kcsan_nestable_atomic_begin(); s->sequence++; smp_wmb(); s->sequence++; kcsan_nestable_atomic_end(); } /** * write_seqcount_invalidate() - invalidate in-progress seqcount_t read * side operations * @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants * * After write_seqcount_invalidate, no seqcount_t read side operations * will complete successfully and see data older than this. */ #define write_seqcount_invalidate(s) \ write_seqcount_t_invalidate(__seqcount_ptr(s)) static inline void write_seqcount_t_invalidate(seqcount_t *s) { smp_wmb(); kcsan_nestable_atomic_begin(); s->sequence+=2; kcsan_nestable_atomic_end(); } /* * Latch sequence counters (seqcount_latch_t) * * A sequence counter variant where the counter even/odd value is used to * switch between two copies of protected data. This allows the read path, * typically NMIs, to safely interrupt the write side critical section. * * As the write sections are fully preemptible, no special handling for * PREEMPT_RT is needed. */ typedef struct { seqcount_t seqcount; } seqcount_latch_t; /** * SEQCNT_LATCH_ZERO() - static initializer for seqcount_latch_t * @seq_name: Name of the seqcount_latch_t instance */ #define SEQCNT_LATCH_ZERO(seq_name) { \ .seqcount = SEQCNT_ZERO(seq_name.seqcount), \ } /** * seqcount_latch_init() - runtime initializer for seqcount_latch_t * @s: Pointer to the seqcount_latch_t instance */ #define seqcount_latch_init(s) seqcount_init(&(s)->seqcount) /** * raw_read_seqcount_latch() - pick even/odd latch data copy * @s: Pointer to seqcount_latch_t * * See raw_write_seqcount_latch() for details and a full reader/writer * usage example. * * Return: sequence counter raw value. Use the lowest bit as an index for * picking which data copy to read. The full counter must then be checked * with read_seqcount_latch_retry(). */ static inline unsigned raw_read_seqcount_latch(const seqcount_latch_t *s) { /* * Pairs with the first smp_wmb() in raw_write_seqcount_latch(). * Due to the dependent load, a full smp_rmb() is not needed. */ return READ_ONCE(s->seqcount.sequence); } /** * read_seqcount_latch_retry() - end a seqcount_latch_t read section * @s: Pointer to seqcount_latch_t * @start: count, from raw_read_seqcount_latch() * * Return: true if a read section retry is required, else false */ static inline int read_seqcount_latch_retry(const seqcount_latch_t *s, unsigned start) { return read_seqcount_retry(&s->seqcount, start); } /** * raw_write_seqcount_latch() - redirect latch readers to even/odd copy * @s: Pointer to seqcount_latch_t * * The latch technique is a multiversion concurrency control method that allows * queries during non-atomic modifications. If you can guarantee queries never * interrupt the modification -- e.g. the concurrency is strictly between CPUs * -- you most likely do not need this. * * Where the traditional RCU/lockless data structures rely on atomic * modifications to ensure queries observe either the old or the new state the * latch allows the same for non-atomic updates. The trade-off is doubling the * cost of storage; we have to maintain two copies of the entire data * structure. * * Very simply put: we first modify one copy and then the other. This ensures * there is always one copy in a stable state, ready to give us an answer. * * The basic form is a data structure like:: * * struct latch_struct { * seqcount_latch_t seq; * struct data_struct data[2]; * }; * * Where a modification, which is assumed to be externally serialized, does the * following:: * * void latch_modify(struct latch_struct *latch, ...) * { * smp_wmb(); // Ensure that the last data[1] update is visible * latch->seq.sequence++; * smp_wmb(); // Ensure that the seqcount update is visible * * modify(latch->data[0], ...); * * smp_wmb(); // Ensure that the data[0] update is visible * latch->seq.sequence++; * smp_wmb(); // Ensure that the seqcount update is visible * * modify(latch->data[1], ...); * } * * The query will have a form like:: * * struct entry *latch_query(struct latch_struct *latch, ...) * { * struct entry *entry; * unsigned seq, idx; * * do { * seq = raw_read_seqcount_latch(&latch->seq); * * idx = seq & 0x01; * entry = data_query(latch->data[idx], ...); * * // This includes needed smp_rmb() * } while (read_seqcount_latch_retry(&latch->seq, seq)); * * return entry; * } * * So during the modification, queries are first redirected to data[1]. Then we * modify data[0]. When that is complete, we redirect queries back to data[0] * and we can modify data[1]. * * NOTE: * * The non-requirement for atomic modifications does _NOT_ include * the publishing of new entries in the case where data is a dynamic * data structure. * * An iteration might start in data[0] and get suspended long enough * to miss an entire modification sequence, once it resumes it might * observe the new entry. * * NOTE2: * * When data is a dynamic data structure; one should use regular RCU * patterns to manage the lifetimes of the objects within. */ static inline void raw_write_seqcount_latch(seqcount_latch_t *s) { smp_wmb(); /* prior stores before incrementing "sequence" */ s->seqcount.sequence++; smp_wmb(); /* increment "sequence" before following stores */ } /* * Sequential locks (seqlock_t) * * Sequence counters with an embedded spinlock for writer serialization * and non-preemptibility. * * For more info, see: * - Comments on top of seqcount_t * - Documentation/locking/seqlock.rst */ typedef struct { /* * Make sure that readers don't starve writers on PREEMPT_RT: use * seqcount_spinlock_t instead of seqcount_t. Check __SEQ_LOCK(). */ seqcount_spinlock_t seqcount; spinlock_t lock; } seqlock_t; #define __SEQLOCK_UNLOCKED(lockname) \ { \ .seqcount = SEQCNT_SPINLOCK_ZERO(lockname, &(lockname).lock), \ .lock = __SPIN_LOCK_UNLOCKED(lockname) \ } /** * seqlock_init() - dynamic initializer for seqlock_t * @sl: Pointer to the seqlock_t instance */ #define seqlock_init(sl) \ do { \ spin_lock_init(&(sl)->lock); \ seqcount_spinlock_init(&(sl)->seqcount, &(sl)->lock); \ } while (0) /** * DEFINE_SEQLOCK(sl) - Define a statically allocated seqlock_t * @sl: Name of the seqlock_t instance */ #define DEFINE_SEQLOCK(sl) \ seqlock_t sl = __SEQLOCK_UNLOCKED(sl) /** * read_seqbegin() - start a seqlock_t read side critical section * @sl: Pointer to seqlock_t * * Return: count, to be passed to read_seqretry() */ static inline unsigned read_seqbegin(const seqlock_t *sl) { unsigned ret = read_seqcount_begin(&sl->seqcount); kcsan_atomic_next(0); /* non-raw usage, assume closing read_seqretry() */ kcsan_flat_atomic_begin(); return ret; } /** * read_seqretry() - end a seqlock_t read side section * @sl: Pointer to seqlock_t * @start: count, from read_seqbegin() * * read_seqretry closes the read side critical section of given seqlock_t. * If the critical section was invalid, it must be ignored (and typically * retried). * * Return: true if a read section retry is required, else false */ static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start) { /* * Assume not nested: read_seqretry() may be called multiple times when * completing read critical section. */ kcsan_flat_atomic_end(); return read_seqcount_retry(&sl->seqcount, start); } /* * For all seqlock_t write side functions, use write_seqcount_*t*_begin() * instead of the generic write_seqcount_begin(). This way, no redundant * lockdep_assert_held() checks are added. */ /** * write_seqlock() - start a seqlock_t write side critical section * @sl: Pointer to seqlock_t * * write_seqlock opens a write side critical section for the given * seqlock_t. It also implicitly acquires the spinlock_t embedded inside * that sequential lock. All seqlock_t write side sections are thus * automatically serialized and non-preemptible. * * Context: if the seqlock_t read section, or other write side critical * sections, can be invoked from hardirq or softirq contexts, use the * _irqsave or _bh variants of this function instead. */ static inline void write_seqlock(seqlock_t *sl) { spin_lock(&sl->lock); write_seqcount_t_begin(&sl->seqcount.seqcount); } /** * write_sequnlock() - end a seqlock_t write side critical section * @sl: Pointer to seqlock_t * * write_sequnlock closes the (serialized and non-preemptible) write side * critical section of given seqlock_t. */ static inline void write_sequnlock(seqlock_t *sl) { write_seqcount_t_end(&sl->seqcount.seqcount); spin_unlock(&sl->lock); } /** * write_seqlock_bh() - start a softirqs-disabled seqlock_t write section * @sl: Pointer to seqlock_t * * _bh variant of write_seqlock(). Use only if the read side section, or * other write side sections, can be invoked from softirq contexts. */ static inline void write_seqlock_bh(seqlock_t *sl) { spin_lock_bh(&sl->lock); write_seqcount_t_begin(&sl->seqcount.seqcount); } /** * write_sequnlock_bh() - end a softirqs-disabled seqlock_t write section * @sl: Pointer to seqlock_t * * write_sequnlock_bh closes the serialized, non-preemptible, and * softirqs-disabled, seqlock_t write side critical section opened with * write_seqlock_bh(). */ static inline void write_sequnlock_bh(seqlock_t *sl) { write_seqcount_t_end(&sl->seqcount.seqcount); spin_unlock_bh(&sl->lock); } /** * write_seqlock_irq() - start a non-interruptible seqlock_t write section * @sl: Pointer to seqlock_t * * _irq variant of write_seqlock(). Use only if the read side section, or * other write sections, can be invoked from hardirq contexts. */ static inline void write_seqlock_irq(seqlock_t *sl) { spin_lock_irq(&sl->lock); write_seqcount_t_begin(&sl->seqcount.seqcount); } /** * write_sequnlock_irq() - end a non-interruptible seqlock_t write section * @sl: Pointer to seqlock_t * * write_sequnlock_irq closes the serialized and non-interruptible * seqlock_t write side section opened with write_seqlock_irq(). */ static inline void write_sequnlock_irq(seqlock_t *sl) { write_seqcount_t_end(&sl->seqcount.seqcount); spin_unlock_irq(&sl->lock); } static inline unsigned long __write_seqlock_irqsave(seqlock_t *sl) { unsigned long flags; spin_lock_irqsave(&sl->lock, flags); write_seqcount_t_begin(&sl->seqcount.seqcount); return flags; } /** * write_seqlock_irqsave() - start a non-interruptible seqlock_t write * section * @lock: Pointer to seqlock_t * @flags: Stack-allocated storage for saving caller's local interrupt * state, to be passed to write_sequnlock_irqrestore(). * * _irqsave variant of write_seqlock(). Use it only if the read side * section, or other write sections, can be invoked from hardirq context. */ #define write_seqlock_irqsave(lock, flags) \ do { flags = __write_seqlock_irqsave(lock); } while (0) /** * write_sequnlock_irqrestore() - end non-interruptible seqlock_t write * section * @sl: Pointer to seqlock_t * @flags: Caller's saved interrupt state, from write_seqlock_irqsave() * * write_sequnlock_irqrestore closes the serialized and non-interruptible * seqlock_t write section previously opened with write_seqlock_irqsave(). */ static inline void write_sequnlock_irqrestore(seqlock_t *sl, unsigned long flags) { write_seqcount_t_end(&sl->seqcount.seqcount); spin_unlock_irqrestore(&sl->lock, flags); } /** * read_seqlock_excl() - begin a seqlock_t locking reader section * @sl: Pointer to seqlock_t * * read_seqlock_excl opens a seqlock_t locking reader critical section. A * locking reader exclusively locks out *both* other writers *and* other * locking readers, but it does not update the embedded sequence number. * * Locking readers act like a normal spin_lock()/spin_unlock(). * * Context: if the seqlock_t write section, *or other read sections*, can * be invoked from hardirq or softirq contexts, use the _irqsave or _bh * variant of this function instead. * * The opened read section must be closed with read_sequnlock_excl(). */ static inline void read_seqlock_excl(seqlock_t *sl) { spin_lock(&sl->lock); } /** * read_sequnlock_excl() - end a seqlock_t locking reader critical section * @sl: Pointer to seqlock_t */ static inline void read_sequnlock_excl(seqlock_t *sl) { spin_unlock(&sl->lock); } /** * read_seqlock_excl_bh() - start a seqlock_t locking reader section with * softirqs disabled * @sl: Pointer to seqlock_t * * _bh variant of read_seqlock_excl(). Use this variant only if the * seqlock_t write side section, *or other read sections*, can be invoked * from softirq contexts. */ static inline void read_seqlock_excl_bh(seqlock_t *sl) { spin_lock_bh(&sl->lock); } /** * read_sequnlock_excl_bh() - stop a seqlock_t softirq-disabled locking * reader section * @sl: Pointer to seqlock_t */ static inline void read_sequnlock_excl_bh(seqlock_t *sl) { spin_unlock_bh(&sl->lock); } /** * read_seqlock_excl_irq() - start a non-interruptible seqlock_t locking * reader section * @sl: Pointer to seqlock_t * * _irq variant of read_seqlock_excl(). Use this only if the seqlock_t * write side section, *or other read sections*, can be invoked from a * hardirq context. */ static inline void read_seqlock_excl_irq(seqlock_t *sl) { spin_lock_irq(&sl->lock); } /** * read_sequnlock_excl_irq() - end an interrupts-disabled seqlock_t * locking reader section * @sl: Pointer to seqlock_t */ static inline void read_sequnlock_excl_irq(seqlock_t *sl) { spin_unlock_irq(&sl->lock); } static inline unsigned long __read_seqlock_excl_irqsave(seqlock_t *sl) { unsigned long flags; spin_lock_irqsave(&sl->lock, flags); return flags; } /** * read_seqlock_excl_irqsave() - start a non-interruptible seqlock_t * locking reader section * @lock: Pointer to seqlock_t * @flags: Stack-allocated storage for saving caller's local interrupt * state, to be passed to read_sequnlock_excl_irqrestore(). * * _irqsave variant of read_seqlock_excl(). Use this only if the seqlock_t * write side section, *or other read sections*, can be invoked from a * hardirq context. */ #define read_seqlock_excl_irqsave(lock, flags) \ do { flags = __read_seqlock_excl_irqsave(lock); } while (0) /** * read_sequnlock_excl_irqrestore() - end non-interruptible seqlock_t * locking reader section * @sl: Pointer to seqlock_t * @flags: Caller saved interrupt state, from read_seqlock_excl_irqsave() */ static inline void read_sequnlock_excl_irqrestore(seqlock_t *sl, unsigned long flags) { spin_unlock_irqrestore(&sl->lock, flags); } /** * read_seqbegin_or_lock() - begin a seqlock_t lockless or locking reader * @lock: Pointer to seqlock_t * @seq : Marker and return parameter. If the passed value is even, the * reader will become a *lockless* seqlock_t reader as in read_seqbegin(). * If the passed value is odd, the reader will become a *locking* reader * as in read_seqlock_excl(). In the first call to this function, the * caller *must* initialize and pass an even value to @seq; this way, a * lockless read can be optimistically tried first. * * read_seqbegin_or_lock is an API designed to optimistically try a normal * lockless seqlock_t read section first. If an odd counter is found, the * lockless read trial has failed, and the next read iteration transforms * itself into a full seqlock_t locking reader. * * This is typically used to avoid seqlock_t lockless readers starvation * (too much retry loops) in the case of a sharp spike in write side * activity. * * Context: if the seqlock_t write section, *or other read sections*, can * be invoked from hardirq or softirq contexts, use the _irqsave or _bh * variant of this function instead. * * Check Documentation/locking/seqlock.rst for template example code. * * Return: the encountered sequence counter value, through the @seq * parameter, which is overloaded as a return parameter. This returned * value must be checked with need_seqretry(). If the read section need to * be retried, this returned value must also be passed as the @seq * parameter of the next read_seqbegin_or_lock() iteration. */ static inline void read_seqbegin_or_lock(seqlock_t *lock, int *seq) { if (!(*seq & 1)) /* Even */ *seq = read_seqbegin(lock); else /* Odd */ read_seqlock_excl(lock); } /** * need_seqretry() - validate seqlock_t "locking or lockless" read section * @lock: Pointer to seqlock_t * @seq: sequence count, from read_seqbegin_or_lock() * * Return: true if a read section retry is required, false otherwise */ static inline int need_seqretry(seqlock_t *lock, int seq) { return !(seq & 1) && read_seqretry(lock, seq); } /** * done_seqretry() - end seqlock_t "locking or lockless" reader section * @lock: Pointer to seqlock_t * @seq: count, from read_seqbegin_or_lock() * * done_seqretry finishes the seqlock_t read side critical section started * with read_seqbegin_or_lock() and validated by need_seqretry(). */ static inline void done_seqretry(seqlock_t *lock, int seq) { if (seq & 1) read_sequnlock_excl(lock); } /** * read_seqbegin_or_lock_irqsave() - begin a seqlock_t lockless reader, or * a non-interruptible locking reader * @lock: Pointer to seqlock_t * @seq: Marker and return parameter. Check read_seqbegin_or_lock(). * * This is the _irqsave variant of read_seqbegin_or_lock(). Use it only if * the seqlock_t write section, *or other read sections*, can be invoked * from hardirq context. * * Note: Interrupts will be disabled only for "locking reader" mode. * * Return: * * 1. The saved local interrupts state in case of a locking reader, to * be passed to done_seqretry_irqrestore(). * * 2. The encountered sequence counter value, returned through @seq * overloaded as a return parameter. Check read_seqbegin_or_lock(). */ static inline unsigned long read_seqbegin_or_lock_irqsave(seqlock_t *lock, int *seq) { unsigned long flags = 0; if (!(*seq & 1)) /* Even */ *seq = read_seqbegin(lock); else /* Odd */ read_seqlock_excl_irqsave(lock, flags); return flags; } /** * done_seqretry_irqrestore() - end a seqlock_t lockless reader, or a * non-interruptible locking reader section * @lock: Pointer to seqlock_t * @seq: Count, from read_seqbegin_or_lock_irqsave() * @flags: Caller's saved local interrupt state in case of a locking * reader, also from read_seqbegin_or_lock_irqsave() * * This is the _irqrestore variant of done_seqretry(). The read section * must've been opened with read_seqbegin_or_lock_irqsave(), and validated * by need_seqretry(). */ static inline void done_seqretry_irqrestore(seqlock_t *lock, int seq, unsigned long flags) { if (seq & 1) read_sequnlock_excl_irqrestore(lock, flags); } #endif /* __LINUX_SEQLOCK_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Berkeley style UIO structures - Alan Cox 1994. */ #ifndef __LINUX_UIO_H #define __LINUX_UIO_H #include <linux/kernel.h> #include <linux/thread_info.h> #include <uapi/linux/uio.h> struct page; struct pipe_inode_info; struct kvec { void *iov_base; /* and that should *never* hold a userland pointer */ size_t iov_len; }; enum iter_type { /* iter types */ ITER_IOVEC = 4, ITER_KVEC = 8, ITER_BVEC = 16, ITER_PIPE = 32, ITER_DISCARD = 64, }; struct iov_iter { /* * Bit 0 is the read/write bit, set if we're writing. * Bit 1 is the BVEC_FLAG_NO_REF bit, set if type is a bvec and * the caller isn't expecting to drop a page reference when done. */ unsigned int type; size_t iov_offset; size_t count; union { const struct iovec *iov; const struct kvec *kvec; const struct bio_vec *bvec; struct pipe_inode_info *pipe; }; union { unsigned long nr_segs; struct { unsigned int head; unsigned int start_head; }; }; }; static inline enum iter_type iov_iter_type(const struct iov_iter *i) { return i->type & ~(READ | WRITE); } static inline bool iter_is_iovec(const struct iov_iter *i) { return iov_iter_type(i) == ITER_IOVEC; } static inline bool iov_iter_is_kvec(const struct iov_iter *i) { return iov_iter_type(i) == ITER_KVEC; } static inline bool iov_iter_is_bvec(const struct iov_iter *i) { return iov_iter_type(i) == ITER_BVEC; } static inline bool iov_iter_is_pipe(const struct iov_iter *i) { return iov_iter_type(i) == ITER_PIPE; } static inline bool iov_iter_is_discard(const struct iov_iter *i) { return iov_iter_type(i) == ITER_DISCARD; } static inline unsigned char iov_iter_rw(const struct iov_iter *i) { return i->type & (READ | WRITE); } /* * Total number of bytes covered by an iovec. * * NOTE that it is not safe to use this function until all the iovec's * segment lengths have been validated. Because the individual lengths can * overflow a size_t when added together. */ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) { unsigned long seg; size_t ret = 0; for (seg = 0; seg < nr_segs; seg++) ret += iov[seg].iov_len; return ret; } static inline struct iovec iov_iter_iovec(const struct iov_iter *iter) { return (struct iovec) { .iov_base = iter->iov->iov_base + iter->iov_offset, .iov_len = min(iter->count, iter->iov->iov_len - iter->iov_offset), }; } size_t iov_iter_copy_from_user_atomic(struct page *page, struct iov_iter *i, unsigned long offset, size_t bytes); void iov_iter_advance(struct iov_iter *i, size_t bytes); void iov_iter_revert(struct iov_iter *i, size_t bytes); int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes); size_t iov_iter_single_seg_count(const struct iov_iter *i); size_t copy_page_to_iter(struct page *page, size_t offset, size_t bytes, struct iov_iter *i); size_t copy_page_from_iter(struct page *page, size_t offset, size_t bytes, struct iov_iter *i); size_t _copy_to_iter(const void *addr, size_t bytes, struct iov_iter *i); size_t _copy_from_iter(void *addr, size_t bytes, struct iov_iter *i); bool _copy_from_iter_full(void *addr, size_t bytes, struct iov_iter *i); size_t _copy_from_iter_nocache(void *addr, size_t bytes, struct iov_iter *i); bool _copy_from_iter_full_nocache(void *addr, size_t bytes, struct iov_iter *i); static __always_inline __must_check size_t copy_to_iter(const void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, true))) return 0; else return _copy_to_iter(addr, bytes, i); } static __always_inline __must_check size_t copy_from_iter(void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, false))) return 0; else return _copy_from_iter(addr, bytes, i); } static __always_inline __must_check bool copy_from_iter_full(void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, false))) return false; else return _copy_from_iter_full(addr, bytes, i); } static __always_inline __must_check size_t copy_from_iter_nocache(void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, false))) return 0; else return _copy_from_iter_nocache(addr, bytes, i); } static __always_inline __must_check bool copy_from_iter_full_nocache(void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, false))) return false; else return _copy_from_iter_full_nocache(addr, bytes, i); } #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE /* * Note, users like pmem that depend on the stricter semantics of * copy_from_iter_flushcache() than copy_from_iter_nocache() must check for * IS_ENABLED(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) before assuming that the * destination is flushed from the cache on return. */ size_t _copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i); #else #define _copy_from_iter_flushcache _copy_from_iter_nocache #endif #ifdef CONFIG_ARCH_HAS_COPY_MC size_t _copy_mc_to_iter(const void *addr, size_t bytes, struct iov_iter *i); #else #define _copy_mc_to_iter _copy_to_iter #endif static __always_inline __must_check size_t copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, false))) return 0; else return _copy_from_iter_flushcache(addr, bytes, i); } static __always_inline __must_check size_t copy_mc_to_iter(void *addr, size_t bytes, struct iov_iter *i) { if (unlikely(!check_copy_size(addr, bytes, true))) return 0; else return _copy_mc_to_iter(addr, bytes, i); } size_t iov_iter_zero(size_t bytes, struct iov_iter *); unsigned long iov_iter_alignment(const struct iov_iter *i); unsigned long iov_iter_gap_alignment(const struct iov_iter *i); void iov_iter_init(struct iov_iter *i, unsigned int direction, const struct iovec *iov, unsigned long nr_segs, size_t count); void iov_iter_kvec(struct iov_iter *i, unsigned int direction, const struct kvec *kvec, unsigned long nr_segs, size_t count); void iov_iter_bvec(struct iov_iter *i, unsigned int direction, const struct bio_vec *bvec, unsigned long nr_segs, size_t count); void iov_iter_pipe(struct iov_iter *i, unsigned int direction, struct pipe_inode_info *pipe, size_t count); void iov_iter_discard(struct iov_iter *i, unsigned int direction, size_t count); ssize_t iov_iter_get_pages(struct iov_iter *i, struct page **pages, size_t maxsize, unsigned maxpages, size_t *start); ssize_t iov_iter_get_pages_alloc(struct iov_iter *i, struct page ***pages, size_t maxsize, size_t *start); int iov_iter_npages(const struct iov_iter *i, int maxpages); const void *dup_iter(struct iov_iter *new, struct iov_iter *old, gfp_t flags); static inline size_t iov_iter_count(const struct iov_iter *i) { return i->count; } /* * Cap the iov_iter by given limit; note that the second argument is * *not* the new size - it's upper limit for such. Passing it a value * greater than the amount of data in iov_iter is fine - it'll just do * nothing in that case. */ static inline void iov_iter_truncate(struct iov_iter *i, u64 count) { /* * count doesn't have to fit in size_t - comparison extends both * operands to u64 here and any value that would be truncated by * conversion in assignement is by definition greater than all * values of size_t, including old i->count. */ if (i->count > count) i->count = count; } /* * reexpand a previously truncated iterator; count must be no more than how much * we had shrunk it. */ static inline void iov_iter_reexpand(struct iov_iter *i, size_t count) { i->count = count; } struct csum_state { __wsum csum; size_t off; }; size_t csum_and_copy_to_iter(const void *addr, size_t bytes, void *csstate, struct iov_iter *i); size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i); bool csum_and_copy_from_iter_full(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i); size_t hash_and_copy_to_iter(const void *addr, size_t bytes, void *hashp, struct iov_iter *i); struct iovec *iovec_from_user(const struct iovec __user *uvector, unsigned long nr_segs, unsigned long fast_segs, struct iovec *fast_iov, bool compat); ssize_t import_iovec(int type, const struct iovec __user *uvec, unsigned nr_segs, unsigned fast_segs, struct iovec **iovp, struct iov_iter *i); ssize_t __import_iovec(int type, const struct iovec __user *uvec, unsigned nr_segs, unsigned fast_segs, struct iovec **iovp, struct iov_iter *i, bool compat); int import_single_range(int type, void __user *buf, size_t len, struct iovec *iov, struct iov_iter *i); int iov_iter_for_each_range(struct iov_iter *i, size_t bytes, int (*f)(struct kvec *vec, void *context), void *context); #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef RQ_QOS_H #define RQ_QOS_H #include <linux/kernel.h> #include <linux/blkdev.h> #include <linux/blk_types.h> #include <linux/atomic.h> #include <linux/wait.h> #include <linux/blk-mq.h> #include "blk-mq-debugfs.h" struct blk_mq_debugfs_attr; enum rq_qos_id { RQ_QOS_WBT, RQ_QOS_LATENCY, RQ_QOS_COST, }; struct rq_wait { wait_queue_head_t wait; atomic_t inflight; }; struct rq_qos { struct rq_qos_ops *ops; struct request_queue *q; enum rq_qos_id id; struct rq_qos *next; #ifdef CONFIG_BLK_DEBUG_FS struct dentry *debugfs_dir; #endif }; struct rq_qos_ops { void (*throttle)(struct rq_qos *, struct bio *); void (*track)(struct rq_qos *, struct request *, struct bio *); void (*merge)(struct rq_qos *, struct request *, struct bio *); void (*issue)(struct rq_qos *, struct request *); void (*requeue)(struct rq_qos *, struct request *); void (*done)(struct rq_qos *, struct request *); void (*done_bio)(struct rq_qos *, struct bio *); void (*cleanup)(struct rq_qos *, struct bio *); void (*queue_depth_changed)(struct rq_qos *); void (*exit)(struct rq_qos *); const struct blk_mq_debugfs_attr *debugfs_attrs; }; struct rq_depth { unsigned int max_depth; int scale_step; bool scaled_max; unsigned int queue_depth; unsigned int default_depth; }; static inline struct rq_qos *rq_qos_id(struct request_queue *q, enum rq_qos_id id) { struct rq_qos *rqos; for (rqos = q->rq_qos; rqos; rqos = rqos->next) { if (rqos->id == id) break; } return rqos; } static inline struct rq_qos *wbt_rq_qos(struct request_queue *q) { return rq_qos_id(q, RQ_QOS_WBT); } static inline struct rq_qos *blkcg_rq_qos(struct request_queue *q) { return rq_qos_id(q, RQ_QOS_LATENCY); } static inline const char *rq_qos_id_to_name(enum rq_qos_id id) { switch (id) { case RQ_QOS_WBT: return "wbt"; case RQ_QOS_LATENCY: return "latency"; case RQ_QOS_COST: return "cost"; } return "unknown"; } static inline void rq_wait_init(struct rq_wait *rq_wait) { atomic_set(&rq_wait->inflight, 0); init_waitqueue_head(&rq_wait->wait); } static inline void rq_qos_add(struct request_queue *q, struct rq_qos *rqos) { /* * No IO can be in-flight when adding rqos, so freeze queue, which * is fine since we only support rq_qos for blk-mq queue. * * Reuse ->queue_lock for protecting against other concurrent * rq_qos adding/deleting */ blk_mq_freeze_queue(q); spin_lock_irq(&q->queue_lock); rqos->next = q->rq_qos; q->rq_qos = rqos; spin_unlock_irq(&q->queue_lock); blk_mq_unfreeze_queue(q); if (rqos->ops->debugfs_attrs) blk_mq_debugfs_register_rqos(rqos); } static inline void rq_qos_del(struct request_queue *q, struct rq_qos *rqos) { struct rq_qos **cur; /* * See comment in rq_qos_add() about freezing queue & using * ->queue_lock. */ blk_mq_freeze_queue(q); spin_lock_irq(&q->queue_lock); for (cur = &q->rq_qos; *cur; cur = &(*cur)->next) { if (*cur == rqos) { *cur = rqos->next; break; } } spin_unlock_irq(&q->queue_lock); blk_mq_unfreeze_queue(q); blk_mq_debugfs_unregister_rqos(rqos); } typedef bool (acquire_inflight_cb_t)(struct rq_wait *rqw, void *private_data); typedef void (cleanup_cb_t)(struct rq_wait *rqw, void *private_data); void rq_qos_wait(struct rq_wait *rqw, void *private_data, acquire_inflight_cb_t *acquire_inflight_cb, cleanup_cb_t *cleanup_cb); bool rq_wait_inc_below(struct rq_wait *rq_wait, unsigned int limit); bool rq_depth_scale_up(struct rq_depth *rqd); bool rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle); bool rq_depth_calc_max_depth(struct rq_depth *rqd); void __rq_qos_cleanup(struct rq_qos *rqos, struct bio *bio); void __rq_qos_done(struct rq_qos *rqos, struct request *rq); void __rq_qos_issue(struct rq_qos *rqos, struct request *rq); void __rq_qos_requeue(struct rq_qos *rqos, struct request *rq); void __rq_qos_throttle(struct rq_qos *rqos, struct bio *bio); void __rq_qos_track(struct rq_qos *rqos, struct request *rq, struct bio *bio); void __rq_qos_merge(struct rq_qos *rqos, struct request *rq, struct bio *bio); void __rq_qos_done_bio(struct rq_qos *rqos, struct bio *bio); void __rq_qos_queue_depth_changed(struct rq_qos *rqos); static inline void rq_qos_cleanup(struct request_queue *q, struct bio *bio) { if (q->rq_qos) __rq_qos_cleanup(q->rq_qos, bio); } static inline void rq_qos_done(struct request_queue *q, struct request *rq) { if (q->rq_qos) __rq_qos_done(q->rq_qos, rq); } static inline void rq_qos_issue(struct request_queue *q, struct request *rq) { if (q->rq_qos) __rq_qos_issue(q->rq_qos, rq); } static inline void rq_qos_requeue(struct request_queue *q, struct request *rq) { if (q->rq_qos) __rq_qos_requeue(q->rq_qos, rq); } static inline void rq_qos_done_bio(struct request_queue *q, struct bio *bio) { if (q->rq_qos) __rq_qos_done_bio(q->rq_qos, bio); } static inline void rq_qos_throttle(struct request_queue *q, struct bio *bio) { /* * BIO_TRACKED lets controllers know that a bio went through the * normal rq_qos path. */ bio_set_flag(bio, BIO_TRACKED); if (q->rq_qos) __rq_qos_throttle(q->rq_qos, bio); } static inline void rq_qos_track(struct request_queue *q, struct request *rq, struct bio *bio) { if (q->rq_qos) __rq_qos_track(q->rq_qos, rq, bio); } static inline void rq_qos_merge(struct request_queue *q, struct request *rq, struct bio *bio) { if (q->rq_qos) __rq_qos_merge(q->rq_qos, rq, bio); } static inline void rq_qos_queue_depth_changed(struct request_queue *q) { if (q->rq_qos) __rq_qos_queue_depth_changed(q->rq_qos); } void rq_qos_exit(struct request_queue *); #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 /* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/fs/pnode.h * * (C) Copyright IBM Corporation 2005. */ #ifndef _LINUX_PNODE_H #define _LINUX_PNODE_H #include <linux/list.h> #include "mount.h" #define IS_MNT_SHARED(m) ((m)->mnt.mnt_flags & MNT_SHARED) #define IS_MNT_SLAVE(m) ((m)->mnt_master) #define IS_MNT_NEW(m) (!(m)->mnt_ns || is_anon_ns((m)->mnt_ns)) #define CLEAR_MNT_SHARED(m) ((m)->mnt.mnt_flags &= ~MNT_SHARED) #define IS_MNT_UNBINDABLE(m) ((m)->mnt.mnt_flags & MNT_UNBINDABLE) #define IS_MNT_MARKED(m) ((m)->mnt.mnt_flags & MNT_MARKED) #define SET_MNT_MARK(m) ((m)->mnt.mnt_flags |= MNT_MARKED) #define CLEAR_MNT_MARK(m) ((m)->mnt.mnt_flags &= ~MNT_MARKED) #define IS_MNT_LOCKED(m) ((m)->mnt.mnt_flags & MNT_LOCKED) #define CL_EXPIRE 0x01 #define CL_SLAVE 0x02 #define CL_COPY_UNBINDABLE 0x04 #define CL_MAKE_SHARED 0x08 #define CL_PRIVATE 0x10 #define CL_SHARED_TO_SLAVE 0x20 #define CL_COPY_MNT_NS_FILE 0x40 #define CL_COPY_ALL (CL_COPY_UNBINDABLE | CL_COPY_MNT_NS_FILE) static inline void set_mnt_shared(struct mount *mnt) { mnt->mnt.mnt_flags &= ~MNT_SHARED_MASK; mnt->mnt.mnt_flags |= MNT_SHARED; } void change_mnt_propagation(struct mount *, int); int propagate_mnt(struct mount *, struct mountpoint *, struct mount *, struct hlist_head *); int propagate_umount(struct list_head *); int propagate_mount_busy(struct mount *, int); void propagate_mount_unlock(struct mount *); void mnt_release_group_id(struct mount *); int get_dominating_id(struct mount *mnt, const struct path *root); int mnt_get_count(struct mount *mnt); void mnt_set_mountpoint(struct mount *, struct mountpoint *, struct mount *); void mnt_change_mountpoint(struct mount *parent, struct mountpoint *mp, struct mount *mnt); struct mount *copy_tree(struct mount *, struct dentry *, int); bool is_path_reachable(struct mount *, struct dentry *, const struct path *root); int count_mounts(struct mnt_namespace *ns, struct mount *mnt); #endif /* _LINUX_PNODE_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_SCSI_CMND_H #define _SCSI_SCSI_CMND_H #include <linux/dma-mapping.h> #include <linux/blkdev.h> #include <linux/t10-pi.h> #include <linux/list.h> #include <linux/types.h> #include <linux/timer.h> #include <linux/scatterlist.h> #include <scsi/scsi_device.h> #include <scsi/scsi_request.h> struct Scsi_Host; struct scsi_driver; /* * MAX_COMMAND_SIZE is: * The longest fixed-length SCSI CDB as per the SCSI standard. * fixed-length means: commands that their size can be determined * by their opcode and the CDB does not carry a length specifier, (unlike * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly * true and the SCSI standard also defines extended commands and * vendor specific commands that can be bigger than 16 bytes. The kernel * will support these using the same infrastructure used for VARLEN CDB's. * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml * supports without specifying a cmd_len by ULD's */ #define MAX_COMMAND_SIZE 16 #if (MAX_COMMAND_SIZE > BLK_MAX_CDB) # error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB #endif struct scsi_data_buffer { struct sg_table table; unsigned length; }; /* embedded in scsi_cmnd */ struct scsi_pointer { char *ptr; /* data pointer */ int this_residual; /* left in this buffer */ struct scatterlist *buffer; /* which buffer */ int buffers_residual; /* how many buffers left */ dma_addr_t dma_handle; volatile int Status; volatile int Message; volatile int have_data_in; volatile int sent_command; volatile int phase; }; /* for scmd->flags */ #define SCMD_TAGGED (1 << 0) #define SCMD_UNCHECKED_ISA_DMA (1 << 1) #define SCMD_INITIALIZED (1 << 2) #define SCMD_LAST (1 << 3) /* flags preserved across unprep / reprep */ #define SCMD_PRESERVED_FLAGS (SCMD_UNCHECKED_ISA_DMA | SCMD_INITIALIZED) /* for scmd->state */ #define SCMD_STATE_COMPLETE 0 #define SCMD_STATE_INFLIGHT 1 struct scsi_cmnd { struct scsi_request req; struct scsi_device *device; struct list_head eh_entry; /* entry for the host eh_cmd_q */ struct delayed_work abort_work; struct rcu_head rcu; int eh_eflags; /* Used by error handlr */ /* * This is set to jiffies as it was when the command was first * allocated. It is used to time how long the command has * been outstanding */ unsigned long jiffies_at_alloc; int retries; int allowed; unsigned char prot_op; unsigned char prot_type; unsigned char prot_flags; unsigned short cmd_len; enum dma_data_direction sc_data_direction; /* These elements define the operation we are about to perform */ unsigned char *cmnd; /* These elements define the operation we ultimately want to perform */ struct scsi_data_buffer sdb; struct scsi_data_buffer *prot_sdb; unsigned underflow; /* Return error if less than this amount is transferred */ unsigned transfersize; /* How much we are guaranteed to transfer with each SCSI transfer (ie, between disconnect / reconnects. Probably == sector size */ struct request *request; /* The command we are working on */ unsigned char *sense_buffer; /* obtained by REQUEST SENSE when * CHECK CONDITION is received on original * command (auto-sense). Length must be * SCSI_SENSE_BUFFERSIZE bytes. */ /* Low-level done function - can be used by low-level driver to point * to completion function. Not used by mid/upper level code. */ void (*scsi_done) (struct scsi_cmnd *); /* * The following fields can be written to by the host specific code. * Everything else should be left alone. */ struct scsi_pointer SCp; /* Scratchpad used by some host adapters */ unsigned char *host_scribble; /* The host adapter is allowed to * call scsi_malloc and get some memory * and hang it here. The host adapter * is also expected to call scsi_free * to release this memory. (The memory * obtained by scsi_malloc is guaranteed * to be at an address < 16Mb). */ int result; /* Status code from lower level driver */ int flags; /* Command flags */ unsigned long state; /* Command completion state */ unsigned char tag; /* SCSI-II queued command tag */ unsigned int extra_len; /* length of alignment and padding */ }; /* * Return the driver private allocation behind the command. * Only works if cmd_size is set in the host template. */ static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd) { return cmd + 1; } /* make sure not to use it with passthrough commands */ static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) { return *(struct scsi_driver **)cmd->request->rq_disk->private_data; } extern void scsi_finish_command(struct scsi_cmnd *cmd); extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count, size_t *offset, size_t *len); extern void scsi_kunmap_atomic_sg(void *virt); blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd); void scsi_free_sgtables(struct scsi_cmnd *cmd); #ifdef CONFIG_SCSI_DMA extern int scsi_dma_map(struct scsi_cmnd *cmd); extern void scsi_dma_unmap(struct scsi_cmnd *cmd); #else /* !CONFIG_SCSI_DMA */ static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; } static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { } #endif /* !CONFIG_SCSI_DMA */ static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd) { return cmd->sdb.table.nents; } static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd) { return cmd->sdb.table.sgl; } static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd) { return cmd->sdb.length; } static inline void scsi_set_resid(struct scsi_cmnd *cmd, unsigned int resid) { cmd->req.resid_len = resid; } static inline unsigned int scsi_get_resid(struct scsi_cmnd *cmd) { return cmd->req.resid_len; } #define scsi_for_each_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_sglist(cmd), sg, nseg, __i) static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd, void *buf, int buflen) { return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, buflen); } static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd, void *buf, int buflen) { return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, buflen); } /* * The operations below are hints that tell the controller driver how * to handle I/Os with DIF or similar types of protection information. */ enum scsi_prot_operations { /* Normal I/O */ SCSI_PROT_NORMAL = 0, /* OS-HBA: Protected, HBA-Target: Unprotected */ SCSI_PROT_READ_INSERT, SCSI_PROT_WRITE_STRIP, /* OS-HBA: Unprotected, HBA-Target: Protected */ SCSI_PROT_READ_STRIP, SCSI_PROT_WRITE_INSERT, /* OS-HBA: Protected, HBA-Target: Protected */ SCSI_PROT_READ_PASS, SCSI_PROT_WRITE_PASS, }; static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op) { scmd->prot_op = op; } static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd) { return scmd->prot_op; } enum scsi_prot_flags { SCSI_PROT_TRANSFER_PI = 1 << 0, SCSI_PROT_GUARD_CHECK = 1 << 1, SCSI_PROT_REF_CHECK = 1 << 2, SCSI_PROT_REF_INCREMENT = 1 << 3, SCSI_PROT_IP_CHECKSUM = 1 << 4, }; /* * The controller usually does not know anything about the target it * is communicating with. However, when DIX is enabled the controller * must be know target type so it can verify the protection * information passed along with the I/O. */ enum scsi_prot_target_type { SCSI_PROT_DIF_TYPE0 = 0, SCSI_PROT_DIF_TYPE1, SCSI_PROT_DIF_TYPE2, SCSI_PROT_DIF_TYPE3, }; static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type) { scmd->prot_type = type; } static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd) { return scmd->prot_type; } static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd) { return blk_rq_pos(scmd->request); } static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd) { return scmd->device->sector_size; } static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd) { return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0; } static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd) { return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL; } static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) { return cmd->prot_sdb; } #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) { cmd->result = (cmd->result & 0xffff00ff) | (status << 8); } static inline void set_host_byte(struct scsi_cmnd *cmd, char status) { cmd->result = (cmd->result & 0xff00ffff) | (status << 16); } static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) { cmd->result = (cmd->result & 0x00ffffff) | (status << 24); } static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) { unsigned int xfer_len = scmd->sdb.length; unsigned int prot_interval = scsi_prot_interval(scmd); if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI) xfer_len += (xfer_len >> ilog2(prot_interval)) * 8; return xfer_len; } #endif /* _SCSI_SCSI_CMND_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 /* SPDX-License-Identifier: GPL-2.0-only */ #ifndef _ASM_X86_APIC_H #define _ASM_X86_APIC_H #include <linux/cpumask.h> #include <asm/alternative.h> #include <asm/cpufeature.h> #include <asm/apicdef.h> #include <linux/atomic.h> #include <asm/fixmap.h> #include <asm/mpspec.h> #include <asm/msr.h> #include <asm/hardirq.h> #define ARCH_APICTIMER_STOPS_ON_C3 1 /* * Debugging macros */ #define APIC_QUIET 0 #define APIC_VERBOSE 1 #define APIC_DEBUG 2 /* Macros for apic_extnmi which controls external NMI masking */ #define APIC_EXTNMI_BSP 0 /* Default */ #define APIC_EXTNMI_ALL 1 #define APIC_EXTNMI_NONE 2 /* * Define the default level of output to be very little * This can be turned up by using apic=verbose for more * information and apic=debug for _lots_ of information. * apic_verbosity is defined in apic.c */ #define apic_printk(v, s, a...) do { \ if ((v) <= apic_verbosity) \ printk(s, ##a); \ } while (0) #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) extern void generic_apic_probe(void); #else static inline void generic_apic_probe(void) { } #endif #ifdef CONFIG_X86_LOCAL_APIC extern int apic_verbosity; extern int local_apic_timer_c2_ok; extern int disable_apic; extern unsigned int lapic_timer_period; extern enum apic_intr_mode_id apic_intr_mode; enum apic_intr_mode_id { APIC_PIC, APIC_VIRTUAL_WIRE, APIC_VIRTUAL_WIRE_NO_CONFIG, APIC_SYMMETRIC_IO, APIC_SYMMETRIC_IO_NO_ROUTING }; #ifdef CONFIG_SMP extern void __inquire_remote_apic(int apicid); #else /* CONFIG_SMP */ static inline void __inquire_remote_apic(int apicid) { } #endif /* CONFIG_SMP */ static inline void default_inquire_remote_apic(int apicid) { if (apic_verbosity >= APIC_DEBUG) __inquire_remote_apic(apicid); } /* * With 82489DX we can't rely on apic feature bit * retrieved via cpuid but still have to deal with * such an apic chip so we assume that SMP configuration * is found from MP table (64bit case uses ACPI mostly * which set smp presence flag as well so we are safe * to use this helper too). */ static inline bool apic_from_smp_config(void) { return smp_found_config && !disable_apic; } /* * Basic functions accessing APICs. */ #ifdef CONFIG_PARAVIRT #include <asm/paravirt.h> #endif extern int setup_profiling_timer(unsigned int); static inline void native_apic_mem_write(u32 reg, u32 v) { volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg); alternative_io("movl %0, %P1", "xchgl %0, %P1", X86_BUG_11AP, ASM_OUTPUT2("=r" (v), "=m" (*addr)), ASM_OUTPUT2("0" (v), "m" (*addr))); } static inline u32 native_apic_mem_read(u32 reg) { return *((volatile u32 *)(APIC_BASE + reg)); } extern void native_apic_wait_icr_idle(void); extern u32 native_safe_apic_wait_icr_idle(void); extern void native_apic_icr_write(u32 low, u32 id); extern u64 native_apic_icr_read(void); static inline bool apic_is_x2apic_enabled(void) { u64 msr; if (rdmsrl_safe(MSR_IA32_APICBASE, &msr)) return false; return msr & X2APIC_ENABLE; } extern void enable_IR_x2apic(void); extern int get_physical_broadcast(void); extern int lapic_get_maxlvt(void); extern void clear_local_APIC(void); extern void disconnect_bsp_APIC(int virt_wire_setup); extern void disable_local_APIC(void); extern void apic_soft_disable(void); extern void lapic_shutdown(void); extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void apic_intr_mode_select(void); extern void apic_intr_mode_init(void); extern void init_apic_mappings(void); void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); extern void setup_secondary_APIC_clock(void); extern void lapic_update_tsc_freq(void); #ifdef CONFIG_X86_64 static inline int apic_force_enable(unsigned long addr) { return -1; } #else extern int apic_force_enable(unsigned long addr); #endif extern void apic_ap_setup(void); /* * On 32bit this is mach-xxx local */ #ifdef CONFIG_X86_64 extern int apic_is_clustered_box(void); #else static inline int apic_is_clustered_box(void) { return 0; } #endif extern int setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask); extern void lapic_assign_system_vectors(void); extern void lapic_assign_legacy_vector(unsigned int isairq, bool replace); extern void lapic_update_legacy_vectors(void); extern void lapic_online(void); extern void lapic_offline(void); extern bool apic_needs_pit(void); extern void apic_send_IPI_allbutself(unsigned int vector); #else /* !CONFIG_X86_LOCAL_APIC */ static inline void lapic_shutdown(void) { } #define local_apic_timer_c2_ok 1 static inline void init_apic_mappings(void) { } static inline void disable_local_APIC(void) { } # define setup_boot_APIC_clock x86_init_noop # define setup_secondary_APIC_clock x86_init_noop static inline void lapic_update_tsc_freq(void) { } static inline void init_bsp_APIC(void) { } static inline void apic_intr_mode_select(void) { } static inline void apic_intr_mode_init(void) { } static inline void lapic_assign_system_vectors(void) { } static inline void lapic_assign_legacy_vector(unsigned int i, bool r) { } static inline bool apic_needs_pit(void) { return true; } #endif /* !CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_X2APIC static inline void native_apic_msr_write(u32 reg, u32 v) { if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR || reg == APIC_LVR) return; wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0); } static inline void native_apic_msr_eoi_write(u32 reg, u32 v) { __wrmsr(APIC_BASE_MSR + (APIC_EOI >> 4), APIC_EOI_ACK, 0); } static inline u32 native_apic_msr_read(u32 reg) { u64 msr; if (reg == APIC_DFR) return -1; rdmsrl(APIC_BASE_MSR + (reg >> 4), msr); return (u32)msr; } static inline void native_x2apic_wait_icr_idle(void) { /* no need to wait for icr idle in x2apic */ return; } static inline u32 native_safe_x2apic_wait_icr_idle(void) { /* no need to wait for icr idle in x2apic */ return 0; } static inline void native_x2apic_icr_write(u32 low, u32 id) { wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low); } static inline u64 native_x2apic_icr_read(void) { unsigned long val; rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val); return val; } extern int x2apic_mode; extern int x2apic_phys; extern void __init x2apic_set_max_apicid(u32 apicid); extern void __init check_x2apic(void); extern void x2apic_setup(void); static inline int x2apic_enabled(void) { return boot_cpu_has(X86_FEATURE_X2APIC) && apic_is_x2apic_enabled(); } #define x2apic_supported() (boot_cpu_has(X86_FEATURE_X2APIC)) #else /* !CONFIG_X86_X2APIC */ static inline void check_x2apic(void) { } static inline void x2apic_setup(void) { } static inline int x2apic_enabled(void) { return 0; } #define x2apic_mode (0) #define x2apic_supported() (0) #endif /* !CONFIG_X86_X2APIC */ struct irq_data; /* * Copyright 2004 James Cleverdon, IBM. * * Generic APIC sub-arch data struct. * * Hacked for x86-64 by James Cleverdon from i386 architecture code by * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and * James Cleverdon. */ struct apic { /* Hotpath functions first */ void (*eoi_write)(u32 reg, u32 v); void (*native_eoi_write)(u32 reg, u32 v); void (*write)(u32 reg, u32 v); u32 (*read)(u32 reg); /* IPI related functions */ void (*wait_icr_idle)(void); u32 (*safe_wait_icr_idle)(void); void (*send_IPI)(int cpu, int vector); void (*send_IPI_mask)(const struct cpumask *mask, int vector); void (*send_IPI_mask_allbutself)(const struct cpumask *msk, int vec); void (*send_IPI_allbutself)(int vector); void (*send_IPI_all)(int vector); void (*send_IPI_self)(int vector); /* dest_logical is used by the IPI functions */ u32 dest_logical; u32 disable_esr; u32 irq_delivery_mode; u32 irq_dest_mode; u32 (*calc_dest_apicid)(unsigned int cpu); /* ICR related functions */ u64 (*icr_read)(void); void (*icr_write)(u32 low, u32 high); /* Probe, setup and smpboot functions */ int (*probe)(void); int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); int (*apic_id_valid)(u32 apicid); int (*apic_id_registered)(void); bool (*check_apicid_used)(physid_mask_t *map, int apicid); void (*init_apic_ldr)(void); void (*ioapic_phys_id_map)(physid_mask_t *phys_map, physid_mask_t *retmap); void (*setup_apic_routing)(void); int (*cpu_present_to_apicid)(int mps_cpu); void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap); int (*check_phys_apicid_present)(int phys_apicid); int (*phys_pkg_id)(int cpuid_apic, int index_msb); u32 (*get_apic_id)(unsigned long x); u32 (*set_apic_id)(unsigned int id); /* wakeup_secondary_cpu */ int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip); void (*inquire_remote_apic)(int apicid); #ifdef CONFIG_X86_32 /* * Called very early during boot from get_smp_config(). It should * return the logical apicid. x86_[bios]_cpu_to_apicid is * initialized before this function is called. * * If logical apicid can't be determined that early, the function * may return BAD_APICID. Logical apicid will be configured after * init_apic_ldr() while bringing up CPUs. Note that NUMA affinity * won't be applied properly during early boot in this case. */ int (*x86_32_early_logical_apicid)(int cpu); #endif char *name; }; /* * Pointer to the local APIC driver in use on this system (there's * always just one such driver in use - the kernel decides via an * early probing process which one it picks - and then sticks to it): */ extern struct apic *apic; /* * APIC drivers are probed based on how they are listed in the .apicdrivers * section. So the order is important and enforced by the ordering * of different apic driver files in the Makefile. * * For the files having two apic drivers, we use apic_drivers() * to enforce the order with in them. */ #define apic_driver(sym) \ static const struct apic *__apicdrivers_##sym __used \ __aligned(sizeof(struct apic *)) \ __section(".apicdrivers") = { &sym } #define apic_drivers(sym1, sym2) \ static struct apic *__apicdrivers_##sym1##sym2[2] __used \ __aligned(sizeof(struct apic *)) \ __section(".apicdrivers") = { &sym1, &sym2 } extern struct apic *__apicdrivers[], *__apicdrivers_end[]; /* * APIC functionality to boot other CPUs - only used on SMP: */ #ifdef CONFIG_SMP extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip); extern int lapic_can_unplug_cpu(void); #endif #ifdef CONFIG_X86_LOCAL_APIC static inline u32 apic_read(u32 reg) { return apic->read(reg); } static inline void apic_write(u32 reg, u32 val) { apic->write(reg, val); } static inline void apic_eoi(void) { apic->eoi_write(APIC_EOI, APIC_EOI_ACK); } static inline u64 apic_icr_read(void) { return apic->icr_read(); } static inline void apic_icr_write(u32 low, u32 high) { apic->icr_write(low, high); } static inline void apic_wait_icr_idle(void) { apic->wait_icr_idle(); } static inline u32 safe_apic_wait_icr_idle(void) { return apic->safe_wait_icr_idle(); } extern void __init apic_set_eoi_write(void (*eoi_write)(u32 reg, u32 v)); #else /* CONFIG_X86_LOCAL_APIC */ static inline u32 apic_read(u32 reg) { return 0; } static inline void apic_write(u32 reg, u32 val) { } static inline void apic_eoi(void) { } static inline u64 apic_icr_read(void) { return 0; } static inline void apic_icr_write(u32 low, u32 high) { } static inline void apic_wait_icr_idle(void) { } static inline u32 safe_apic_wait_icr_idle(void) { return 0; } static inline void apic_set_eoi_write(void (*eoi_write)(u32 reg, u32 v)) {} #endif /* CONFIG_X86_LOCAL_APIC */ extern void apic_ack_irq(struct irq_data *data); static inline void ack_APIC_irq(void) { /* * ack_APIC_irq() actually gets compiled as a single instruction * ... yummie. */ apic_eoi(); } static inline bool lapic_vector_set_in_irr(unsigned int vector) { u32 irr = apic_read(APIC_IRR + (vector / 32 * 0x10)); return !!(irr & (1U << (vector % 32))); } static inline unsigned default_get_apic_id(unsigned long x) { unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR)); if (APIC_XAPIC(ver) || boot_cpu_has(X86_FEATURE_EXTD_APICID)) return (x >> 24) & 0xFF; else return (x >> 24) & 0x0F; } /* * Warm reset vector position: */ #define TRAMPOLINE_PHYS_LOW 0x467 #define TRAMPOLINE_PHYS_HIGH 0x469 extern void generic_bigsmp_probe(void); #ifdef CONFIG_X86_LOCAL_APIC #include <asm/smp.h> #define APIC_DFR_VALUE (APIC_DFR_FLAT) DECLARE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_bios_cpu_apicid); extern struct apic apic_noop; static inline unsigned int read_apic_id(void) { unsigned int reg = apic_read(APIC_ID); return apic->get_apic_id(reg); } extern int default_apic_id_valid(u32 apicid); extern int default_acpi_madt_oem_check(char *, char *); extern void default_setup_apic_routing(void); extern u32 apic_default_calc_apicid(unsigned int cpu); extern u32 apic_flat_calc_apicid(unsigned int cpu); extern bool default_check_apicid_used(physid_mask_t *map, int apicid); extern void default_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap); extern int default_cpu_present_to_apicid(int mps_cpu); extern int default_check_phys_apicid_present(int phys_apicid); #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_SMP bool apic_id_is_primary_thread(unsigned int id); void apic_smt_update(void); #else static inline bool apic_id_is_primary_thread(unsigned int id) { return false; } static inline void apic_smt_update(void) { } #endif struct msi_msg; #ifdef CONFIG_PCI_MSI void x86_vector_msi_compose_msg(struct irq_data *data, struct msi_msg *msg); #else # define x86_vector_msi_compose_msg NULL #endif extern void ioapic_zap_locks(void); #endif /* _ASM_X86_APIC_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 #undef TRACE_SYSTEM #define TRACE_SYSTEM neigh #if !defined(_TRACE_NEIGH_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_NEIGH_H #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/tracepoint.h> #include <net/neighbour.h> #define neigh_state_str(state) \ __print_symbolic(state, \ { NUD_INCOMPLETE, "incomplete" }, \ { NUD_REACHABLE, "reachable" }, \ { NUD_STALE, "stale" }, \ { NUD_DELAY, "delay" }, \ { NUD_PROBE, "probe" }, \ { NUD_FAILED, "failed" }, \ { NUD_NOARP, "noarp" }, \ { NUD_PERMANENT, "permanent"}) TRACE_EVENT(neigh_create, TP_PROTO(struct neigh_table *tbl, struct net_device *dev, const void *pkey, const struct neighbour *n, bool exempt_from_gc), TP_ARGS(tbl, dev, pkey, n, exempt_from_gc), TP_STRUCT__entry( __field(u32, family) __dynamic_array(char, dev, IFNAMSIZ ) __field(int, entries) __field(u8, created) __field(u8, gc_exempt) __array(u8, primary_key4, 4) __array(u8, primary_key6, 16) ), TP_fast_assign( struct in6_addr *pin6; __be32 *p32; __entry->family = tbl->family; __assign_str(dev, (dev ? dev->name : "NULL")); __entry->entries = atomic_read(&tbl->gc_entries); __entry->created = n != NULL; __entry->gc_exempt = exempt_from_gc; pin6 = (struct in6_addr *)__entry->primary_key6; p32 = (__be32 *)__entry->primary_key4; if (tbl->family == AF_INET) *p32 = *(__be32 *)pkey; else *p32 = 0; #if IS_ENABLED(CONFIG_IPV6) if (tbl->family == AF_INET6) { pin6 = (struct in6_addr *)__entry->primary_key6; *pin6 = *(struct in6_addr *)pkey; } #endif ), TP_printk("family %d dev %s entries %d primary_key4 %pI4 primary_key6 %pI6c created %d gc_exempt %d", __entry->family, __get_str(dev), __entry->entries, __entry->primary_key4, __entry->primary_key6, __entry->created, __entry->gc_exempt) ); TRACE_EVENT(neigh_update, TP_PROTO(struct neighbour *n, const u8 *lladdr, u8 new, u32 flags, u32 nlmsg_pid), TP_ARGS(n, lladdr, new, flags, nlmsg_pid), TP_STRUCT__entry( __field(u32, family) __string(dev, (n->dev ? n->dev->name : "NULL")) __array(u8, lladdr, MAX_ADDR_LEN) __field(u8, lladdr_len) __field(u8, flags) __field(u8, nud_state) __field(u8, type) __field(u8, dead) __field(int, refcnt) __array(__u8, primary_key4, 4) __array(__u8, primary_key6, 16) __field(unsigned long, confirmed) __field(unsigned long, updated) __field(unsigned long, used) __array(u8, new_lladdr, MAX_ADDR_LEN) __field(u8, new_state) __field(u32, update_flags) __field(u32, pid) ), TP_fast_assign( int lladdr_len = (n->dev ? n->dev->addr_len : MAX_ADDR_LEN); struct in6_addr *pin6; __be32 *p32; __entry->family = n->tbl->family; __assign_str(dev, (n->dev ? n->dev->name : "NULL")); __entry->lladdr_len = lladdr_len; memcpy(__entry->lladdr, n->ha, lladdr_len); __entry->flags = n->flags; __entry->nud_state = n->nud_state; __entry->type = n->type; __entry->dead = n->dead; __entry->refcnt = refcount_read(&n->refcnt); pin6 = (struct in6_addr *)__entry->primary_key6; p32 = (__be32 *)__entry->primary_key4; if (n->tbl->family == AF_INET) *p32 = *(__be32 *)n->primary_key; else *p32 = 0; #if IS_ENABLED(CONFIG_IPV6) if (n->tbl->family == AF_INET6) { pin6 = (struct in6_addr *)__entry->primary_key6; *pin6 = *(struct in6_addr *)n->primary_key; } else #endif { ipv6_addr_set_v4mapped(*p32, pin6); } __entry->confirmed = n->confirmed; __entry->updated = n->updated; __entry->used = n->used; if (lladdr) memcpy(__entry->new_lladdr, lladdr, lladdr_len); __entry->new_state = new; __entry->update_flags = flags; __entry->pid = nlmsg_pid; ), TP_printk("family %d dev %s lladdr %s flags %02x nud_state %s type %02x " "dead %d refcnt %d primary_key4 %pI4 primary_key6 %pI6c " "confirmed %lu updated %lu used %lu new_lladdr %s " "new_state %s update_flags %02x pid %d", __entry->family, __get_str(dev), __print_hex_str(__entry->lladdr, __entry->lladdr_len), __entry->flags, neigh_state_str(__entry->nud_state), __entry->type, __entry->dead, __entry->refcnt, __entry->primary_key4, __entry->primary_key6, __entry->confirmed, __entry->updated, __entry->used, __print_hex_str(__entry->new_lladdr, __entry->lladdr_len), neigh_state_str(__entry->new_state), __entry->update_flags, __entry->pid) ); DECLARE_EVENT_CLASS(neigh__update, TP_PROTO(struct neighbour *n, int err), TP_ARGS(n, err), TP_STRUCT__entry( __field(u32, family) __string(dev, (n->dev ? n->dev->name : "NULL")) __array(u8, lladdr, MAX_ADDR_LEN) __field(u8, lladdr_len) __field(u8, flags) __field(u8, nud_state) __field(u8, type) __field(u8, dead) __field(int, refcnt) __array(__u8, primary_key4, 4) __array(__u8, primary_key6, 16) __field(unsigned long, confirmed) __field(unsigned long, updated) __field(unsigned long, used) __field(u32, err) ), TP_fast_assign( int lladdr_len = (n->dev ? n->dev->addr_len : MAX_ADDR_LEN); struct in6_addr *pin6; __be32 *p32; __entry->family = n->tbl->family; __assign_str(dev, (n->dev ? n->dev->name : "NULL")); __entry->lladdr_len = lladdr_len; memcpy(__entry->lladdr, n->ha, lladdr_len); __entry->flags = n->flags; __entry->nud_state = n->nud_state; __entry->type = n->type; __entry->dead = n->dead; __entry->refcnt = refcount_read(&n->refcnt); pin6 = (struct in6_addr *)__entry->primary_key6; p32 = (__be32 *)__entry->primary_key4; if (n->tbl->family == AF_INET) *p32 = *(__be32 *)n->primary_key; else *p32 = 0; #if IS_ENABLED(CONFIG_IPV6) if (n->tbl->family == AF_INET6) { pin6 = (struct in6_addr *)__entry->primary_key6; *pin6 = *(struct in6_addr *)n->primary_key; } else #endif { ipv6_addr_set_v4mapped(*p32, pin6); } __entry->confirmed = n->confirmed; __entry->updated = n->updated; __entry->used = n->used; __entry->err = err; ), TP_printk("family %d dev %s lladdr %s flags %02x nud_state %s type %02x " "dead %d refcnt %d primary_key4 %pI4 primary_key6 %pI6c " "confirmed %lu updated %lu used %lu err %d", __entry->family, __get_str(dev), __print_hex_str(__entry->lladdr, __entry->lladdr_len), __entry->flags, neigh_state_str(__entry->nud_state), __entry->type, __entry->dead, __entry->refcnt, __entry->primary_key4, __entry->primary_key6, __entry->confirmed, __entry->updated, __entry->used, __entry->err) ); DEFINE_EVENT(neigh__update, neigh_update_done, TP_PROTO(struct neighbour *neigh, int err), TP_ARGS(neigh, err) ); DEFINE_EVENT(neigh__update, neigh_timer_handler, TP_PROTO(struct neighbour *neigh, int err), TP_ARGS(neigh, err) ); DEFINE_EVENT(neigh__update, neigh_event_send_done, TP_PROTO(struct neighbour *neigh, int err), TP_ARGS(neigh, err) ); DEFINE_EVENT(neigh__update, neigh_event_send_dead, TP_PROTO(struct neighbour *neigh, int err), TP_ARGS(neigh, err) ); DEFINE_EVENT(neigh__update, neigh_cleanup_and_release, TP_PROTO(struct neighbour *neigh, int rc), TP_ARGS(neigh, rc) ); #endif /* _TRACE_NEIGH_H */ /* This part must be outside protection */ #include <trace/define_trace.h>
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_LIST_NULLS_H #define _LINUX_LIST_NULLS_H #include <linux/poison.h> #include <linux/const.h> /* * Special version of lists, where end of list is not a NULL pointer, * but a 'nulls' marker, which can have many different values. * (up to 2^31 different values guaranteed on all platforms) * * In the standard hlist, termination of a list is the NULL pointer. * In this special 'nulls' variant, we use the fact that objects stored in * a list are aligned on a word (4 or 8 bytes alignment). * We therefore use the last significant bit of 'ptr' : * Set to 1 : This is a 'nulls' end-of-list marker (ptr >> 1) * Set to 0 : This is a pointer to some object (ptr) */ struct hlist_nulls_head { struct hlist_nulls_node *first; }; struct hlist_nulls_node { struct hlist_nulls_node *next, **pprev; }; #define NULLS_MARKER(value) (1UL | (((long)value) << 1)) #define INIT_HLIST_NULLS_HEAD(ptr, nulls) \ ((ptr)->first = (struct hlist_nulls_node *) NULLS_MARKER(nulls)) #define hlist_nulls_entry(ptr, type, member) container_of(ptr,type,member) #define hlist_nulls_entry_safe(ptr, type, member) \ ({ typeof(ptr) ____ptr = (ptr); \ !is_a_nulls(____ptr) ? hlist_nulls_entry(____ptr, type, member) : NULL; \ }) /** * ptr_is_a_nulls - Test if a ptr is a nulls * @ptr: ptr to be tested * */ static inline int is_a_nulls(const struct hlist_nulls_node *ptr) { return ((unsigned long)ptr & 1); } /** * get_nulls_value - Get the 'nulls' value of the end of chain * @ptr: end of chain * * Should be called only if is_a_nulls(ptr); */ static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr) { return ((unsigned long)ptr) >> 1; } /** * hlist_nulls_unhashed - Has node been removed and reinitialized? * @h: Node to be checked * * Not that not all removal functions will leave a node in unhashed state. * For example, hlist_del_init_rcu() leaves the node in unhashed state, * but hlist_nulls_del() does not. */ static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h) { return !h->pprev; } /** * hlist_nulls_unhashed_lockless - Has node been removed and reinitialized? * @h: Node to be checked * * Not that not all removal functions will leave a node in unhashed state. * For example, hlist_del_init_rcu() leaves the node in unhashed state, * but hlist_nulls_del() does not. Unlike hlist_nulls_unhashed(), this * function may be used locklessly. */ static inline int hlist_nulls_unhashed_lockless(const struct hlist_nulls_node *h) { return !READ_ONCE(h->pprev); } static inline int hlist_nulls_empty(const struct hlist_nulls_head *h) { return is_a_nulls(READ_ONCE(h->first)); } static inline void hlist_nulls_add_head(struct hlist_nulls_node *n, struct hlist_nulls_head *h) { struct hlist_nulls_node *first = h->first; n->next = first; WRITE_ONCE(n->pprev, &h->first); h->first = n; if (!is_a_nulls(first)) WRITE_ONCE(first->pprev, &n->next); } static inline void __hlist_nulls_del(struct hlist_nulls_node *n) { struct hlist_nulls_node *next = n->next; struct hlist_nulls_node **pprev = n->pprev; WRITE_ONCE(*pprev, next); if (!is_a_nulls(next)) WRITE_ONCE(next->pprev, pprev); } static inline void hlist_nulls_del(struct hlist_nulls_node *n) { __hlist_nulls_del(n); WRITE_ONCE(n->pprev, LIST_POISON2); } /** * hlist_nulls_for_each_entry - iterate over list of given type * @tpos: the type * to use as a loop cursor. * @pos: the &struct hlist_node to use as a loop cursor. * @head: the head for your list. * @member: the name of the hlist_node within the struct. * */ #define hlist_nulls_for_each_entry(tpos, pos, head, member) \ for (pos = (head)->first; \ (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \ pos = pos->next) /** * hlist_nulls_for_each_entry_from - iterate over a hlist continuing from current point * @tpos: the type * to use as a loop cursor. * @pos: the &struct hlist_node to use as a loop cursor. * @member: the name of the hlist_node within the struct. * */ #define hlist_nulls_for_each_entry_from(tpos, pos, member) \ for (; (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \ pos = pos->next) #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 /* SPDX-License-Identifier: GPL-2.0+ */ /* * Driver for 8250/16550-type serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. * * Copyright (C) 2001 Russell King. */ #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/dmaengine.h> #include "../serial_mctrl_gpio.h" struct uart_8250_dma { int (*tx_dma)(struct uart_8250_port *p); int (*rx_dma)(struct uart_8250_port *p); /* Filter function */ dma_filter_fn fn; /* Parameter to the filter function */ void *rx_param; void *tx_param; struct dma_slave_config rxconf; struct dma_slave_config txconf; struct dma_chan *rxchan; struct dma_chan *txchan; /* Device address base for DMA operations */ phys_addr_t rx_dma_addr; phys_addr_t tx_dma_addr; /* DMA address of the buffer in memory */ dma_addr_t rx_addr; dma_addr_t tx_addr; dma_cookie_t rx_cookie; dma_cookie_t tx_cookie; void *rx_buf; size_t rx_size; size_t tx_size; unsigned char tx_running; unsigned char tx_err; unsigned char rx_running; }; struct old_serial_port { unsigned int uart; unsigned int baud_base; unsigned int port; unsigned int irq; upf_t flags; unsigned char io_type; unsigned char __iomem *iomem_base; unsigned short iomem_reg_shift; }; struct serial8250_config { const char *name; unsigned short fifo_size; unsigned short tx_loadsz; unsigned char fcr; unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE]; unsigned int flags; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ #define UART_CAP_EFR (1 << 9) /* UART has EFR */ #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ #define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: * STOP PARITY EPAR SPAR WLEN5 WLEN6 */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ #define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ #define UART_BUG_TXRACE (1 << 5) /* UART Tx fails to set remote DR */ #ifdef CONFIG_SERIAL_8250_SHARE_IRQ #define SERIAL8250_SHARE_IRQS 1 #else #define SERIAL8250_SHARE_IRQS 0 #endif #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \ { \ .iobase = _base, \ .irq = _irq, \ .uartclk = 1843200, \ .iotype = UPIO_PORT, \ .flags = UPF_BOOT_AUTOCONF | (_flags), \ } #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0) static inline int serial_in(struct uart_8250_port *up, int offset) { return up->port.serial_in(&up->port, offset); } static inline void serial_out(struct uart_8250_port *up, int offset, int value) { up->port.serial_out(&up->port, offset, value); } void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); static inline int serial_dl_read(struct uart_8250_port *up) { return up->dl_read(up); } static inline void serial_dl_write(struct uart_8250_port *up, int value) { up->dl_write(up, value); } static inline bool serial8250_set_THRI(struct uart_8250_port *up) { if (up->ier & UART_IER_THRI) return false; up->ier |= UART_IER_THRI; serial_out(up, UART_IER, up->ier); return true; } static inline bool serial8250_clear_THRI(struct uart_8250_port *up) { if (!(up->ier & UART_IER_THRI)) return false; up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); return true; } struct uart_8250_port *serial8250_get_port(int line); void serial8250_rpm_get(struct uart_8250_port *p); void serial8250_rpm_put(struct uart_8250_port *p); void serial8250_rpm_get_tx(struct uart_8250_port *p); void serial8250_rpm_put_tx(struct uart_8250_port *p); int serial8250_em485_config(struct uart_port *port, struct serial_rs485 *rs485); void serial8250_em485_start_tx(struct uart_8250_port *p); void serial8250_em485_stop_tx(struct uart_8250_port *p); void serial8250_em485_destroy(struct uart_8250_port *p); /* MCR <-> TIOCM conversion */ static inline int serial8250_TIOCM_to_MCR(int tiocm) { int mcr = 0; if (tiocm & TIOCM_RTS) mcr |= UART_MCR_RTS; if (tiocm & TIOCM_DTR) mcr |= UART_MCR_DTR; if (tiocm & TIOCM_OUT1) mcr |= UART_MCR_OUT1; if (tiocm & TIOCM_OUT2) mcr |= UART_MCR_OUT2; if (tiocm & TIOCM_LOOP) mcr |= UART_MCR_LOOP; return mcr; } static inline int serial8250_MCR_to_TIOCM(int mcr) { int tiocm = 0; if (mcr & UART_MCR_RTS) tiocm |= TIOCM_RTS; if (mcr & UART_MCR_DTR) tiocm |= TIOCM_DTR; if (mcr & UART_MCR_OUT1) tiocm |= TIOCM_OUT1; if (mcr & UART_MCR_OUT2) tiocm |= TIOCM_OUT2; if (mcr & UART_MCR_LOOP) tiocm |= TIOCM_LOOP; return tiocm; } /* MSR <-> TIOCM conversion */ static inline int serial8250_MSR_to_TIOCM(int msr) { int tiocm = 0; if (msr & UART_MSR_DCD) tiocm |= TIOCM_CAR; if (msr & UART_MSR_RI) tiocm |= TIOCM_RNG; if (msr & UART_MSR_DSR) tiocm |= TIOCM_DSR; if (msr & UART_MSR_CTS) tiocm |= TIOCM_CTS; return tiocm; } static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) { serial_out(up, UART_MCR, value); if (up->gpios) mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value)); } static inline int serial8250_in_MCR(struct uart_8250_port *up) { int mctrl; mctrl = serial_in(up, UART_MCR); if (up->gpios) { unsigned int mctrl_gpio = 0; mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio); mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio); } return mctrl; } #if defined(__alpha__) && !defined(CONFIG_PCI) /* * Digital did something really horribly wrong with the OUT1 and OUT2 * lines on at least some ALPHA's. The failure mode is that if either * is cleared, the machine locks up with endless interrupts. */ #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) #else #define ALPHA_KLUDGE_MCR 0 #endif #ifdef CONFIG_SERIAL_8250_PNP int serial8250_pnp_init(void); void serial8250_pnp_exit(void); #else static inline int serial8250_pnp_init(void) { return 0; } static inline void serial8250_pnp_exit(void) { } #endif #ifdef CONFIG_SERIAL_8250_FINTEK int fintek_8250_probe(struct uart_8250_port *uart); #else static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; } #endif #ifdef CONFIG_ARCH_OMAP1 static inline int is_omap1_8250(struct uart_8250_port *pt) { int res; switch (pt->port.mapbase) { case OMAP1_UART1_BASE: case OMAP1_UART2_BASE: case OMAP1_UART3_BASE: res = 1; break; default: res = 0; break; } return res; } static inline int is_omap1510_8250(struct uart_8250_port *pt) { if (!cpu_is_omap1510()) return 0; return is_omap1_8250(pt); } #else static inline int is_omap1_8250(struct uart_8250_port *pt) { return 0; } static inline int is_omap1510_8250(struct uart_8250_port *pt) { return 0; } #endif #ifdef CONFIG_SERIAL_8250_DMA extern int serial8250_tx_dma(struct uart_8250_port *); extern int serial8250_rx_dma(struct uart_8250_port *); extern void serial8250_rx_dma_flush(struct uart_8250_port *); extern int serial8250_request_dma(struct uart_8250_port *); extern void serial8250_release_dma(struct uart_8250_port *); #else static inline int serial8250_tx_dma(struct uart_8250_port *p) { return -1; } static inline int serial8250_rx_dma(struct uart_8250_port *p) { return -1; } static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { } static inline int serial8250_request_dma(struct uart_8250_port *p) { return -1; } static inline void serial8250_release_dma(struct uart_8250_port *p) { } #endif static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) { unsigned char status; status = serial_in(up, 0x04); /* EXCR2 */ #define PRESL(x) ((x) & 0x30) if (PRESL(status) == 0x10) { /* already in high speed mode */ return 0; } else { status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ serial_out(up, 0x04, status); } return 1; } static inline int serial_index(struct uart_port *port) { return port->minor - 64; }
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 /* SPDX-License-Identifier: GPL-2.0 */ #undef TRACE_SYSTEM #define TRACE_SYSTEM percpu #if !defined(_TRACE_PERCPU_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_PERCPU_H #include <linux/tracepoint.h> TRACE_EVENT(percpu_alloc_percpu, TP_PROTO(bool reserved, bool is_atomic, size_t size, size_t align, void *base_addr, int off, void __percpu *ptr), TP_ARGS(reserved, is_atomic, size, align, base_addr, off, ptr), TP_STRUCT__entry( __field( bool, reserved ) __field( bool, is_atomic ) __field( size_t, size ) __field( size_t, align ) __field( void *, base_addr ) __field( int, off ) __field( void __percpu *, ptr ) ), TP_fast_assign( __entry->reserved = reserved; __entry->is_atomic = is_atomic; __entry->size = size; __entry->align = align; __entry->base_addr = base_addr; __entry->off = off; __entry->ptr = ptr; ), TP_printk("reserved=%d is_atomic=%d size=%zu align=%zu base_addr=%p off=%d ptr=%p", __entry->reserved, __entry->is_atomic, __entry->size, __entry->align, __entry->base_addr, __entry->off, __entry->ptr) ); TRACE_EVENT(percpu_free_percpu, TP_PROTO(void *base_addr, int off, void __percpu *ptr), TP_ARGS(base_addr, off, ptr), TP_STRUCT__entry( __field( void *, base_addr ) __field( int, off ) __field( void __percpu *, ptr ) ), TP_fast_assign( __entry->base_addr = base_addr; __entry->off = off; __entry->ptr = ptr; ), TP_printk("base_addr=%p off=%d ptr=%p", __entry->base_addr, __entry->off, __entry->ptr) ); TRACE_EVENT(percpu_alloc_percpu_fail, TP_PROTO(bool reserved, bool is_atomic, size_t size, size_t align), TP_ARGS(reserved, is_atomic, size, align), TP_STRUCT__entry( __field( bool, reserved ) __field( bool, is_atomic ) __field( size_t, size ) __field( size_t, align ) ), TP_fast_assign( __entry->reserved = reserved; __entry->is_atomic = is_atomic; __entry->size = size; __entry->align = align; ), TP_printk("reserved=%d is_atomic=%d size=%zu align=%zu", __entry->reserved, __entry->is_atomic, __entry->size, __entry->align) ); TRACE_EVENT(percpu_create_chunk, TP_PROTO(void *base_addr), TP_ARGS(base_addr), TP_STRUCT__entry( __field( void *, base_addr ) ), TP_fast_assign( __entry->base_addr = base_addr; ), TP_printk("base_addr=%p", __entry->base_addr) ); TRACE_EVENT(percpu_destroy_chunk, TP_PROTO(void *base_addr), TP_ARGS(base_addr), TP_STRUCT__entry( __field( void *, base_addr ) ), TP_fast_assign( __entry->base_addr = base_addr; ), TP_printk("base_addr=%p", __entry->base_addr) ); #endif /* _TRACE_PERCPU_H */ #include <trace/define_trace.h>
1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 // SPDX-License-Identifier: GPL-2.0 /* * preemptoff and irqoff tracepoints * * Copyright (C) Joel Fernandes (Google) <joel@joelfernandes.org> */ #include <linux/kallsyms.h> #include <linux/uaccess.h> #include <linux/module.h> #include <linux/ftrace.h> #include <linux/kprobes.h> #include "trace.h" #define CREATE_TRACE_POINTS #include <trace/events/preemptirq.h> #ifdef CONFIG_TRACE_IRQFLAGS /* Per-cpu variable to prevent redundant calls when IRQs already off */ static DEFINE_PER_CPU(int, tracing_irq_cpu); /* * Like trace_hardirqs_on() but without the lockdep invocation. This is * used in the low level entry code where the ordering vs. RCU is important * and lockdep uses a staged approach which splits the lockdep hardirq * tracking into a RCU on and a RCU off section. */ void trace_hardirqs_on_prepare(void) { if (this_cpu_read(tracing_irq_cpu)) { if (!in_nmi()) trace_irq_enable(CALLER_ADDR0, CALLER_ADDR1); tracer_hardirqs_on(CALLER_ADDR0, CALLER_ADDR1); this_cpu_write(tracing_irq_cpu, 0); } } EXPORT_SYMBOL(trace_hardirqs_on_prepare); NOKPROBE_SYMBOL(trace_hardirqs_on_prepare); void trace_hardirqs_on(void) { if (this_cpu_read(tracing_irq_cpu)) { if (!in_nmi()) trace_irq_enable_rcuidle(CALLER_ADDR0, CALLER_ADDR1); tracer_hardirqs_on(CALLER_ADDR0, CALLER_ADDR1); this_cpu_write(tracing_irq_cpu, 0); } lockdep_hardirqs_on_prepare(CALLER_ADDR0); lockdep_hardirqs_on(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_on); NOKPROBE_SYMBOL(trace_hardirqs_on); /* * Like trace_hardirqs_off() but without the lockdep invocation. This is * used in the low level entry code where the ordering vs. RCU is important * and lockdep uses a staged approach which splits the lockdep hardirq * tracking into a RCU on and a RCU off section. */ void trace_hardirqs_off_finish(void) { if (!this_cpu_read(tracing_irq_cpu)) { this_cpu_write(tracing_irq_cpu, 1); tracer_hardirqs_off(CALLER_ADDR0, CALLER_ADDR1); if (!in_nmi()) trace_irq_disable(CALLER_ADDR0, CALLER_ADDR1); } } EXPORT_SYMBOL(trace_hardirqs_off_finish); NOKPROBE_SYMBOL(trace_hardirqs_off_finish); void trace_hardirqs_off(void) { lockdep_hardirqs_off(CALLER_ADDR0); if (!this_cpu_read(tracing_irq_cpu)) { this_cpu_write(tracing_irq_cpu, 1); tracer_hardirqs_off(CALLER_ADDR0, CALLER_ADDR1); if (!in_nmi()) trace_irq_disable_rcuidle(CALLER_ADDR0, CALLER_ADDR1); } } EXPORT_SYMBOL(trace_hardirqs_off); NOKPROBE_SYMBOL(trace_hardirqs_off); __visible void trace_hardirqs_on_caller(unsigned long caller_addr) { if (this_cpu_read(tracing_irq_cpu)) { if (!in_nmi()) trace_irq_enable_rcuidle(CALLER_ADDR0, caller_addr); tracer_hardirqs_on(CALLER_ADDR0, caller_addr); this_cpu_write(tracing_irq_cpu, 0); } lockdep_hardirqs_on_prepare(CALLER_ADDR0); lockdep_hardirqs_on(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_on_caller); NOKPROBE_SYMBOL(trace_hardirqs_on_caller); __visible void trace_hardirqs_off_caller(unsigned long caller_addr) { lockdep_hardirqs_off(CALLER_ADDR0); if (!this_cpu_read(tracing_irq_cpu)) { this_cpu_write(tracing_irq_cpu, 1); tracer_hardirqs_off(CALLER_ADDR0, caller_addr); if (!in_nmi()) trace_irq_disable_rcuidle(CALLER_ADDR0, caller_addr); } } EXPORT_SYMBOL(trace_hardirqs_off_caller); NOKPROBE_SYMBOL(trace_hardirqs_off_caller); #endif /* CONFIG_TRACE_IRQFLAGS */ #ifdef CONFIG_TRACE_PREEMPT_TOGGLE void trace_preempt_on(unsigned long a0, unsigned long a1) { if (!in_nmi()) trace_preempt_enable_rcuidle(a0, a1); tracer_preempt_on(a0, a1); } void trace_preempt_off(unsigned long a0, unsigned long a1) { if (!in_nmi()) trace_preempt_disable_rcuidle(a0, a1); tracer_preempt_off(a0, a1); } #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _NF_CONNTRACK_EXTEND_H #define _NF_CONNTRACK_EXTEND_H #include <linux/slab.h> #include <net/netfilter/nf_conntrack.h> enum nf_ct_ext_id { NF_CT_EXT_HELPER, #if IS_ENABLED(CONFIG_NF_NAT) NF_CT_EXT_NAT, #endif NF_CT_EXT_SEQADJ, NF_CT_EXT_ACCT, #ifdef CONFIG_NF_CONNTRACK_EVENTS NF_CT_EXT_ECACHE, #endif #ifdef CONFIG_NF_CONNTRACK_TIMESTAMP NF_CT_EXT_TSTAMP, #endif #ifdef CONFIG_NF_CONNTRACK_TIMEOUT NF_CT_EXT_TIMEOUT, #endif #ifdef CONFIG_NF_CONNTRACK_LABELS NF_CT_EXT_LABELS, #endif #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY) NF_CT_EXT_SYNPROXY, #endif NF_CT_EXT_NUM, }; #define NF_CT_EXT_HELPER_TYPE struct nf_conn_help #define NF_CT_EXT_NAT_TYPE struct nf_conn_nat #define NF_CT_EXT_SEQADJ_TYPE struct nf_conn_seqadj #define NF_CT_EXT_ACCT_TYPE struct nf_conn_acct #define NF_CT_EXT_ECACHE_TYPE struct nf_conntrack_ecache #define NF_CT_EXT_TSTAMP_TYPE struct nf_conn_tstamp #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy /* Extensions: optional stuff which isn't permanently in struct. */ struct nf_ct_ext { u8 offset[NF_CT_EXT_NUM]; u8 len; char data[]; }; static inline bool __nf_ct_ext_exist(const struct nf_ct_ext *ext, u8 id) { return !!ext->offset[id]; } static inline bool nf_ct_ext_exist(const struct nf_conn *ct, u8 id) { return (ct->ext && __nf_ct_ext_exist(ct->ext, id)); } static inline void *__nf_ct_ext_find(const struct nf_conn *ct, u8 id) { if (!nf_ct_ext_exist(ct, id)) return NULL; return (void *)ct->ext + ct->ext->offset[id]; } #define nf_ct_ext_find(ext, id) \ ((id##_TYPE *)__nf_ct_ext_find((ext), (id))) /* Destroy all relationships */ void nf_ct_ext_destroy(struct nf_conn *ct); /* Add this type, returns pointer to data or NULL. */ void *nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp); struct nf_ct_ext_type { /* Destroys relationships (can be NULL). */ void (*destroy)(struct nf_conn *ct); enum nf_ct_ext_id id; /* Length and min alignment. */ u8 len; u8 align; }; int nf_ct_extend_register(const struct nf_ct_ext_type *type); void nf_ct_extend_unregister(const struct nf_ct_ext_type *type); #endif /* _NF_CONNTRACK_EXTEND_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/include/linux/jbd2.h * * Written by Stephen C. Tweedie <sct@redhat.com> * * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved * * Definitions for transaction data structures for the buffer cache * filesystem journaling support. */ #ifndef _LINUX_JBD2_H #define _LINUX_JBD2_H /* Allow this file to be included directly into e2fsprogs */ #ifndef __KERNEL__ #include "jfs_compat.h" #define JBD2_DEBUG #else #include <linux/types.h> #include <linux/buffer_head.h> #include <linux/journal-head.h> #include <linux/stddef.h> #include <linux/mutex.h> #include <linux/timer.h> #include <linux/slab.h> #include <linux/bit_spinlock.h> #include <linux/blkdev.h> #include <crypto/hash.h> #endif #define journal_oom_retry 1 /* * Define JBD2_PARANIOD_IOFAIL to cause a kernel BUG() if ext4 finds * certain classes of error which can occur due to failed IOs. Under * normal use we want ext4 to continue after such errors, because * hardware _can_ fail, but for debugging purposes when running tests on * known-good hardware we may want to trap these errors. */ #undef JBD2_PARANOID_IOFAIL /* * The default maximum commit age, in seconds. */ #define JBD2_DEFAULT_MAX_COMMIT_AGE 5 #ifdef CONFIG_JBD2_DEBUG /* * Define JBD2_EXPENSIVE_CHECKING to enable more expensive internal * consistency checks. By default we don't do this unless * CONFIG_JBD2_DEBUG is on. */ #define JBD2_EXPENSIVE_CHECKING extern ushort jbd2_journal_enable_debug; void __jbd2_debug(int level, const char *file, const char *func, unsigned int line, const char *fmt, ...); #define jbd_debug(n, fmt, a...) \ __jbd2_debug((n), __FILE__, __func__, __LINE__, (fmt), ##a) #else #define jbd_debug(n, fmt, a...) /**/ #endif extern void *jbd2_alloc(size_t size, gfp_t flags); extern void jbd2_free(void *ptr, size_t size); #define JBD2_MIN_JOURNAL_BLOCKS 1024 #define JBD2_MIN_FC_BLOCKS 256 #ifdef __KERNEL__ /** * typedef handle_t - The handle_t type represents a single atomic update being performed by some process. * * All filesystem modifications made by the process go * through this handle. Recursive operations (such as quota operations) * are gathered into a single update. * * The buffer credits field is used to account for journaled buffers * being modified by the running process. To ensure that there is * enough log space for all outstanding operations, we need to limit the * number of outstanding buffers possible at any time. When the * operation completes, any buffer credits not used are credited back to * the transaction, so that at all times we know how many buffers the * outstanding updates on a transaction might possibly touch. * * This is an opaque datatype. **/ typedef struct jbd2_journal_handle handle_t; /* Atomic operation type */ /** * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem. * * journal_t is linked to from the fs superblock structure. * * We use the journal_t to keep track of all outstanding transaction * activity on the filesystem, and to manage the state of the log * writing process. * * This is an opaque datatype. **/ typedef struct journal_s journal_t; /* Journal control structure */ #endif /* * Internal structures used by the logging mechanism: */ #define JBD2_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */ /* * On-disk structures */ /* * Descriptor block types: */ #define JBD2_DESCRIPTOR_BLOCK 1 #define JBD2_COMMIT_BLOCK 2 #define JBD2_SUPERBLOCK_V1 3 #define JBD2_SUPERBLOCK_V2 4 #define JBD2_REVOKE_BLOCK 5 /* * Standard header for all descriptor blocks: */ typedef struct journal_header_s { __be32 h_magic; __be32 h_blocktype; __be32 h_sequence; } journal_header_t; /* * Checksum types. */ #define JBD2_CRC32_CHKSUM 1 #define JBD2_MD5_CHKSUM 2 #define JBD2_SHA1_CHKSUM 3 #define JBD2_CRC32C_CHKSUM 4 #define JBD2_CRC32_CHKSUM_SIZE 4 #define JBD2_CHECKSUM_BYTES (32 / sizeof(u32)) /* * Commit block header for storing transactional checksums: * * NOTE: If FEATURE_COMPAT_CHECKSUM (checksum v1) is set, the h_chksum* * fields are used to store a checksum of the descriptor and data blocks. * * If FEATURE_INCOMPAT_CSUM_V2 (checksum v2) is set, then the h_chksum * field is used to store crc32c(uuid+commit_block). Each journal metadata * block gets its own checksum, and data block checksums are stored in * journal_block_tag (in the descriptor). The other h_chksum* fields are * not used. * * If FEATURE_INCOMPAT_CSUM_V3 is set, the descriptor block uses * journal_block_tag3_t to store a full 32-bit checksum. Everything else * is the same as v2. * * Checksum v1, v2, and v3 are mutually exclusive features. */ struct commit_header { __be32 h_magic; __be32 h_blocktype; __be32 h_sequence; unsigned char h_chksum_type; unsigned char h_chksum_size; unsigned char h_padding[2]; __be32 h_chksum[JBD2_CHECKSUM_BYTES]; __be64 h_commit_sec; __be32 h_commit_nsec; }; /* * The block tag: used to describe a single buffer in the journal. * t_blocknr_high is only used if INCOMPAT_64BIT is set, so this * raw struct shouldn't be used for pointer math or sizeof() - use * journal_tag_bytes(journal) instead to compute this. */ typedef struct journal_block_tag3_s { __be32 t_blocknr; /* The on-disk block number */ __be32 t_flags; /* See below */ __be32 t_blocknr_high; /* most-significant high 32bits. */ __be32 t_checksum; /* crc32c(uuid+seq+block) */ } journal_block_tag3_t; typedef struct journal_block_tag_s { __be32 t_blocknr; /* The on-disk block number */ __be16 t_checksum; /* truncated crc32c(uuid+seq+block) */ __be16 t_flags; /* See below */ __be32 t_blocknr_high; /* most-significant high 32bits. */ } journal_block_tag_t; /* Tail of descriptor or revoke block, for checksumming */ struct jbd2_journal_block_tail { __be32 t_checksum; /* crc32c(uuid+descr_block) */ }; /* * The revoke descriptor: used on disk to describe a series of blocks to * be revoked from the log */ typedef struct jbd2_journal_revoke_header_s { journal_header_t r_header; __be32 r_count; /* Count of bytes used in the block */ } jbd2_journal_revoke_header_t; /* Definitions for the journal tag flags word: */ #define JBD2_FLAG_ESCAPE 1 /* on-disk block is escaped */ #define JBD2_FLAG_SAME_UUID 2 /* block has same uuid as previous */ #define JBD2_FLAG_DELETED 4 /* block deleted by this transaction */ #define JBD2_FLAG_LAST_TAG 8 /* last tag in this descriptor block */ /* * The journal superblock. All fields are in big-endian byte order. */ typedef struct journal_superblock_s { /* 0x0000 */ journal_header_t s_header; /* 0x000C */ /* Static information describing the journal */ __be32 s_blocksize; /* journal device blocksize */ __be32 s_maxlen; /* total blocks in journal file */ __be32 s_first; /* first block of log information */ /* 0x0018 */ /* Dynamic information describing the current state of the log */ __be32 s_sequence; /* first commit ID expected in log */ __be32 s_start; /* blocknr of start of log */ /* 0x0020 */ /* Error value, as set by jbd2_journal_abort(). */ __be32 s_errno; /* 0x0024 */ /* Remaining fields are only valid in a version-2 superblock */ __be32 s_feature_compat; /* compatible feature set */ __be32 s_feature_incompat; /* incompatible feature set */ __be32 s_feature_ro_compat; /* readonly-compatible feature set */ /* 0x0030 */ __u8 s_uuid[16]; /* 128-bit uuid for journal */ /* 0x0040 */ __be32 s_nr_users; /* Nr of filesystems sharing log */ __be32 s_dynsuper; /* Blocknr of dynamic superblock copy*/ /* 0x0048 */ __be32 s_max_transaction; /* Limit of journal blocks per trans.*/ __be32 s_max_trans_data; /* Limit of data blocks per trans. */ /* 0x0050 */ __u8 s_checksum_type; /* checksum type */ __u8 s_padding2[3]; /* 0x0054 */ __be32 s_num_fc_blks; /* Number of fast commit blocks */ /* 0x0058 */ __u32 s_padding[41]; __be32 s_checksum; /* crc32c(superblock) */ /* 0x0100 */ __u8 s_users[16*48]; /* ids of all fs'es sharing the log */ /* 0x0400 */ } journal_superblock_t; /* Use the jbd2_{has,set,clear}_feature_* helpers; these will be removed */ #define JBD2_HAS_COMPAT_FEATURE(j,mask) \ ((j)->j_format_version >= 2 && \ ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask)))) #define JBD2_HAS_RO_COMPAT_FEATURE(j,mask) \ ((j)->j_format_version >= 2 && \ ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask)))) #define JBD2_HAS_INCOMPAT_FEATURE(j,mask) \ ((j)->j_format_version >= 2 && \ ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask)))) #define JBD2_FEATURE_COMPAT_CHECKSUM 0x00000001 #define JBD2_FEATURE_INCOMPAT_REVOKE 0x00000001 #define JBD2_FEATURE_INCOMPAT_64BIT 0x00000002 #define JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT 0x00000004 #define JBD2_FEATURE_INCOMPAT_CSUM_V2 0x00000008 #define JBD2_FEATURE_INCOMPAT_CSUM_V3 0x00000010 #define JBD2_FEATURE_INCOMPAT_FAST_COMMIT 0x00000020 /* See "journal feature predicate functions" below */ /* Features known to this kernel version: */ #define JBD2_KNOWN_COMPAT_FEATURES JBD2_FEATURE_COMPAT_CHECKSUM #define JBD2_KNOWN_ROCOMPAT_FEATURES 0 #define JBD2_KNOWN_INCOMPAT_FEATURES (JBD2_FEATURE_INCOMPAT_REVOKE | \ JBD2_FEATURE_INCOMPAT_64BIT | \ JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT | \ JBD2_FEATURE_INCOMPAT_CSUM_V2 | \ JBD2_FEATURE_INCOMPAT_CSUM_V3 | \ JBD2_FEATURE_INCOMPAT_FAST_COMMIT) #ifdef __KERNEL__ #include <linux/fs.h> #include <linux/sched.h> enum jbd_state_bits { BH_JBD /* Has an attached ext3 journal_head */ = BH_PrivateStart, BH_JWrite, /* Being written to log (@@@ DEBUGGING) */ BH_Freed, /* Has been freed (truncated) */ BH_Revoked, /* Has been revoked from the log */ BH_RevokeValid, /* Revoked flag is valid */ BH_JBDDirty, /* Is dirty but journaled */ BH_JournalHead, /* Pins bh->b_private and jh->b_bh */ BH_Shadow, /* IO on shadow buffer is running */ BH_Verified, /* Metadata block has been verified ok */ BH_JBDPrivateStart, /* First bit available for private use by FS */ }; BUFFER_FNS(JBD, jbd) BUFFER_FNS(JWrite, jwrite) BUFFER_FNS(JBDDirty, jbddirty) TAS_BUFFER_FNS(JBDDirty, jbddirty) BUFFER_FNS(Revoked, revoked) TAS_BUFFER_FNS(Revoked, revoked) BUFFER_FNS(RevokeValid, revokevalid) TAS_BUFFER_FNS(RevokeValid, revokevalid) BUFFER_FNS(Freed, freed) BUFFER_FNS(Shadow, shadow) BUFFER_FNS(Verified, verified) static inline struct buffer_head *jh2bh(struct journal_head *jh) { return jh->b_bh; } static inline struct journal_head *bh2jh(struct buffer_head *bh) { return bh->b_private; } static inline void jbd_lock_bh_journal_head(struct buffer_head *bh) { bit_spin_lock(BH_JournalHead, &bh->b_state); } static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh) { bit_spin_unlock(BH_JournalHead, &bh->b_state); } #define J_ASSERT(assert) BUG_ON(!(assert)) #define J_ASSERT_BH(bh, expr) J_ASSERT(expr) #define J_ASSERT_JH(jh, expr) J_ASSERT(expr) #if defined(JBD2_PARANOID_IOFAIL) #define J_EXPECT(expr, why...) J_ASSERT(expr) #define J_EXPECT_BH(bh, expr, why...) J_ASSERT_BH(bh, expr) #define J_EXPECT_JH(jh, expr, why...) J_ASSERT_JH(jh, expr) #else #define __journal_expect(expr, why...) \ ({ \ int val = (expr); \ if (!val) { \ printk(KERN_ERR \ "JBD2 unexpected failure: %s: %s;\n", \ __func__, #expr); \ printk(KERN_ERR why "\n"); \ } \ val; \ }) #define J_EXPECT(expr, why...) __journal_expect(expr, ## why) #define J_EXPECT_BH(bh, expr, why...) __journal_expect(expr, ## why) #define J_EXPECT_JH(jh, expr, why...) __journal_expect(expr, ## why) #endif /* Flags in jbd_inode->i_flags */ #define __JI_COMMIT_RUNNING 0 #define __JI_WRITE_DATA 1 #define __JI_WAIT_DATA 2 /* * Commit of the inode data in progress. We use this flag to protect us from * concurrent deletion of inode. We cannot use reference to inode for this * since we cannot afford doing last iput() on behalf of kjournald */ #define JI_COMMIT_RUNNING (1 << __JI_COMMIT_RUNNING) /* Write allocated dirty buffers in this inode before commit */ #define JI_WRITE_DATA (1 << __JI_WRITE_DATA) /* Wait for outstanding data writes for this inode before commit */ #define JI_WAIT_DATA (1 << __JI_WAIT_DATA) /** * struct jbd2_inode - The jbd_inode type is the structure linking inodes in * ordered mode present in a transaction so that we can sync them during commit. */ struct jbd2_inode { /** * @i_transaction: * * Which transaction does this inode belong to? Either the running * transaction or the committing one. [j_list_lock] */ transaction_t *i_transaction; /** * @i_next_transaction: * * Pointer to the running transaction modifying inode's data in case * there is already a committing transaction touching it. [j_list_lock] */ transaction_t *i_next_transaction; /** * @i_list: List of inodes in the i_transaction [j_list_lock] */ struct list_head i_list; /** * @i_vfs_inode: * * VFS inode this inode belongs to [constant for lifetime of structure] */ struct inode *i_vfs_inode; /** * @i_flags: Flags of inode [j_list_lock] */ unsigned long i_flags; /** * @i_dirty_start: * * Offset in bytes where the dirty range for this inode starts. * [j_list_lock] */ loff_t i_dirty_start; /** * @i_dirty_end: * * Inclusive offset in bytes where the dirty range for this inode * ends. [j_list_lock] */ loff_t i_dirty_end; }; struct jbd2_revoke_table_s; /** * struct jbd2_journal_handle - The jbd2_journal_handle type is the concrete * type associated with handle_t. * @h_transaction: Which compound transaction is this update a part of? * @h_journal: Which journal handle belongs to - used iff h_reserved set. * @h_rsv_handle: Handle reserved for finishing the logical operation. * @h_total_credits: Number of remaining buffers we are allowed to add to * journal. These are dirty buffers and revoke descriptor blocks. * @h_revoke_credits: Number of remaining revoke records available for handle * @h_ref: Reference count on this handle. * @h_err: Field for caller's use to track errors through large fs operations. * @h_sync: Flag for sync-on-close. * @h_jdata: Flag to force data journaling. * @h_reserved: Flag for handle for reserved credits. * @h_aborted: Flag indicating fatal error on handle. * @h_type: For handle statistics. * @h_line_no: For handle statistics. * @h_start_jiffies: Handle Start time. * @h_requested_credits: Holds @h_total_credits after handle is started. * @h_revoke_credits_requested: Holds @h_revoke_credits after handle is started. * @saved_alloc_context: Saved context while transaction is open. **/ /* Docbook can't yet cope with the bit fields, but will leave the documentation * in so it can be fixed later. */ struct jbd2_journal_handle { union { transaction_t *h_transaction; /* Which journal handle belongs to - used iff h_reserved set */ journal_t *h_journal; }; handle_t *h_rsv_handle; int h_total_credits; int h_revoke_credits; int h_revoke_credits_requested; int h_ref; int h_err; /* Flags [no locking] */ unsigned int h_sync: 1; unsigned int h_jdata: 1; unsigned int h_reserved: 1; unsigned int h_aborted: 1; unsigned int h_type: 8; unsigned int h_line_no: 16; unsigned long h_start_jiffies; unsigned int h_requested_credits; unsigned int saved_alloc_context; }; /* * Some stats for checkpoint phase */ struct transaction_chp_stats_s { unsigned long cs_chp_time; __u32 cs_forced_to_close; __u32 cs_written; __u32 cs_dropped; }; /* The transaction_t type is the guts of the journaling mechanism. It * tracks a compound transaction through its various states: * * RUNNING: accepting new updates * LOCKED: Updates still running but we don't accept new ones * RUNDOWN: Updates are tidying up but have finished requesting * new buffers to modify (state not used for now) * FLUSH: All updates complete, but we are still writing to disk * COMMIT: All data on disk, writing commit record * FINISHED: We still have to keep the transaction for checkpointing. * * The transaction keeps track of all of the buffers modified by a * running transaction, and all of the buffers committed but not yet * flushed to home for finished transactions. */ /* * Lock ranking: * * j_list_lock * ->jbd_lock_bh_journal_head() (This is "innermost") * * j_state_lock * ->b_state_lock * * b_state_lock * ->j_list_lock * * j_state_lock * ->t_handle_lock * * j_state_lock * ->j_list_lock (journal_unmap_buffer) * */ struct transaction_s { /* Pointer to the journal for this transaction. [no locking] */ journal_t *t_journal; /* Sequence number for this transaction [no locking] */ tid_t t_tid; /* * Transaction's current state * [no locking - only kjournald2 alters this] * [j_list_lock] guards transition of a transaction into T_FINISHED * state and subsequent call of __jbd2_journal_drop_transaction() * FIXME: needs barriers * KLUDGE: [use j_state_lock] */ enum { T_RUNNING, T_LOCKED, T_SWITCH, T_FLUSH, T_COMMIT, T_COMMIT_DFLUSH, T_COMMIT_JFLUSH, T_COMMIT_CALLBACK, T_FINISHED } t_state; /* * Where in the log does this transaction's commit start? [no locking] */ unsigned long t_log_start; /* Number of buffers on the t_buffers list [j_list_lock] */ int t_nr_buffers; /* * Doubly-linked circular list of all buffers reserved but not yet * modified by this transaction [j_list_lock] */ struct journal_head *t_reserved_list; /* * Doubly-linked circular list of all metadata buffers owned by this * transaction [j_list_lock] */ struct journal_head *t_buffers; /* * Doubly-linked circular list of all forget buffers (superseded * buffers which we can un-checkpoint once this transaction commits) * [j_list_lock] */ struct journal_head *t_forget; /* * Doubly-linked circular list of all buffers still to be flushed before * this transaction can be checkpointed. [j_list_lock] */ struct journal_head *t_checkpoint_list; /* * Doubly-linked circular list of all buffers submitted for IO while * checkpointing. [j_list_lock] */ struct journal_head *t_checkpoint_io_list; /* * Doubly-linked circular list of metadata buffers being shadowed by log * IO. The IO buffers on the iobuf list and the shadow buffers on this * list match each other one for one at all times. [j_list_lock] */ struct journal_head *t_shadow_list; /* * List of inodes associated with the transaction; e.g., ext4 uses * this to track inodes in data=ordered and data=journal mode that * need special handling on transaction commit; also used by ocfs2. * [j_list_lock] */ struct list_head t_inode_list; /* * Protects info related to handles */ spinlock_t t_handle_lock; /* * Longest time some handle had to wait for running transaction */ unsigned long t_max_wait; /* * When transaction started */ unsigned long t_start; /* * When commit was requested */ unsigned long t_requested; /* * Checkpointing stats [j_checkpoint_sem] */ struct transaction_chp_stats_s t_chp_stats; /* * Number of outstanding updates running on this transaction * [none] */ atomic_t t_updates; /* * Number of blocks reserved for this transaction in the journal. * This is including all credits reserved when starting transaction * handles as well as all journal descriptor blocks needed for this * transaction. [none] */ atomic_t t_outstanding_credits; /* * Number of revoke records for this transaction added by already * stopped handles. [none] */ atomic_t t_outstanding_revokes; /* * How many handles used this transaction? [none] */ atomic_t t_handle_count; /* * Forward and backward links for the circular list of all transactions * awaiting checkpoint. [j_list_lock] */ transaction_t *t_cpnext, *t_cpprev; /* * When will the transaction expire (become due for commit), in jiffies? * [no locking] */ unsigned long t_expires; /* * When this transaction started, in nanoseconds [no locking] */ ktime_t t_start_time; /* * This transaction is being forced and some process is * waiting for it to finish. */ unsigned int t_synchronous_commit:1; /* Disk flush needs to be sent to fs partition [no locking] */ int t_need_data_flush; /* * For use by the filesystem to store fs-specific data * structures associated with the transaction */ struct list_head t_private_list; }; struct transaction_run_stats_s { unsigned long rs_wait; unsigned long rs_request_delay; unsigned long rs_running; unsigned long rs_locked; unsigned long rs_flushing; unsigned long rs_logging; __u32 rs_handle_count; __u32 rs_blocks; __u32 rs_blocks_logged; }; struct transaction_stats_s { unsigned long ts_tid; unsigned long ts_requested; struct transaction_run_stats_s run; }; static inline unsigned long jbd2_time_diff(unsigned long start, unsigned long end) { if (end >= start) return end - start; return end + (MAX_JIFFY_OFFSET - start); } #define JBD2_NR_BATCH 64 enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY}; #define JBD2_FC_REPLAY_STOP 0 #define JBD2_FC_REPLAY_CONTINUE 1 /** * struct journal_s - The journal_s type is the concrete type associated with * journal_t. */ struct journal_s { /** * @j_flags: General journaling state flags [j_state_lock] */ unsigned long j_flags; /** * @j_errno: * * Is there an outstanding uncleared error on the journal (from a prior * abort)? [j_state_lock] */ int j_errno; /** * @j_abort_mutex: Lock the whole aborting procedure. */ struct mutex j_abort_mutex; /** * @j_sb_buffer: The first part of the superblock buffer. */ struct buffer_head *j_sb_buffer; /** * @j_superblock: The second part of the superblock buffer. */ journal_superblock_t *j_superblock; /** * @j_format_version: Version of the superblock format. */ int j_format_version; /** * @j_state_lock: Protect the various scalars in the journal. */ rwlock_t j_state_lock; /** * @j_barrier_count: * * Number of processes waiting to create a barrier lock [j_state_lock] */ int j_barrier_count; /** * @j_barrier: The barrier lock itself. */ struct mutex j_barrier; /** * @j_running_transaction: * * Transactions: The current running transaction... * [j_state_lock] [caller holding open handle] */ transaction_t *j_running_transaction; /** * @j_committing_transaction: * * the transaction we are pushing to disk * [j_state_lock] [caller holding open handle] */ transaction_t *j_committing_transaction; /** * @j_checkpoint_transactions: * * ... and a linked circular list of all transactions waiting for * checkpointing. [j_list_lock] */ transaction_t *j_checkpoint_transactions; /** * @j_wait_transaction_locked: * * Wait queue for waiting for a locked transaction to start committing, * or for a barrier lock to be released. */ wait_queue_head_t j_wait_transaction_locked; /** * @j_wait_done_commit: Wait queue for waiting for commit to complete. */ wait_queue_head_t j_wait_done_commit; /** * @j_wait_commit: Wait queue to trigger commit. */ wait_queue_head_t j_wait_commit; /** * @j_wait_updates: Wait queue to wait for updates to complete. */ wait_queue_head_t j_wait_updates; /** * @j_wait_reserved: * * Wait queue to wait for reserved buffer credits to drop. */ wait_queue_head_t j_wait_reserved; /** * @j_fc_wait: * * Wait queue to wait for completion of async fast commits. */ wait_queue_head_t j_fc_wait; /** * @j_checkpoint_mutex: * * Semaphore for locking against concurrent checkpoints. */ struct mutex j_checkpoint_mutex; /** * @j_chkpt_bhs: * * List of buffer heads used by the checkpoint routine. This * was moved from jbd2_log_do_checkpoint() to reduce stack * usage. Access to this array is controlled by the * @j_checkpoint_mutex. [j_checkpoint_mutex] */ struct buffer_head *j_chkpt_bhs[JBD2_NR_BATCH]; /** * @j_head: * * Journal head: identifies the first unused block in the journal. * [j_state_lock] */ unsigned long j_head; /** * @j_tail: * * Journal tail: identifies the oldest still-used block in the journal. * [j_state_lock] */ unsigned long j_tail; /** * @j_free: * * Journal free: how many free blocks are there in the journal? * [j_state_lock] */ unsigned long j_free; /** * @j_first: * * The block number of the first usable block in the journal * [j_state_lock]. */ unsigned long j_first; /** * @j_last: * * The block number one beyond the last usable block in the journal * [j_state_lock]. */ unsigned long j_last; /** * @j_fc_first: * * The block number of the first fast commit block in the journal * [j_state_lock]. */ unsigned long j_fc_first; /** * @j_fc_off: * * Number of fast commit blocks currently allocated. Accessed only * during fast commit. Currently only process can do fast commit, so * this field is not protected by any lock. */ unsigned long j_fc_off; /** * @j_fc_last: * * The block number one beyond the last fast commit block in the journal * [j_state_lock]. */ unsigned long j_fc_last; /** * @j_dev: Device where we store the journal. */ struct block_device *j_dev; /** * @j_blocksize: Block size for the location where we store the journal. */ int j_blocksize; /** * @j_blk_offset: * * Starting block offset into the device where we store the journal. */ unsigned long long j_blk_offset; /** * @j_devname: Journal device name. */ char j_devname[BDEVNAME_SIZE+24]; /** * @j_fs_dev: * * Device which holds the client fs. For internal journal this will be * equal to j_dev. */ struct block_device *j_fs_dev; /** * @j_total_len: Total maximum capacity of the journal region on disk. */ unsigned int j_total_len; /** * @j_reserved_credits: * * Number of buffers reserved from the running transaction. */ atomic_t j_reserved_credits; /** * @j_list_lock: Protects the buffer lists and internal buffer state. */ spinlock_t j_list_lock; /** * @j_inode: * * Optional inode where we store the journal. If present, all * journal block numbers are mapped into this inode via bmap(). */ struct inode *j_inode; /** * @j_tail_sequence: * * Sequence number of the oldest transaction in the log [j_state_lock] */ tid_t j_tail_sequence; /** * @j_transaction_sequence: * * Sequence number of the next transaction to grant [j_state_lock] */ tid_t j_transaction_sequence; /** * @j_commit_sequence: * * Sequence number of the most recently committed transaction * [j_state_lock]. */ tid_t j_commit_sequence; /** * @j_commit_request: * * Sequence number of the most recent transaction wanting commit * [j_state_lock] */ tid_t j_commit_request; /** * @j_uuid: * * Journal uuid: identifies the object (filesystem, LVM volume etc) * backed by this journal. This will eventually be replaced by an array * of uuids, allowing us to index multiple devices within a single * journal and to perform atomic updates across them. */ __u8 j_uuid[16]; /** * @j_task: Pointer to the current commit thread for this journal. */ struct task_struct *j_task; /** * @j_max_transaction_buffers: * * Maximum number of metadata buffers to allow in a single compound * commit transaction. */ int j_max_transaction_buffers; /** * @j_revoke_records_per_block: * * Number of revoke records that fit in one descriptor block. */ int j_revoke_records_per_block; /** * @j_commit_interval: * * What is the maximum transaction lifetime before we begin a commit? */ unsigned long j_commit_interval; /** * @j_commit_timer: The timer used to wakeup the commit thread. */ struct timer_list j_commit_timer; /** * @j_revoke_lock: Protect the revoke table. */ spinlock_t j_revoke_lock; /** * @j_revoke: * * The revoke table - maintains the list of revoked blocks in the * current transaction. */ struct jbd2_revoke_table_s *j_revoke; /** * @j_revoke_table: Alternate revoke tables for j_revoke. */ struct jbd2_revoke_table_s *j_revoke_table[2]; /** * @j_wbuf: Array of bhs for jbd2_journal_commit_transaction. */ struct buffer_head **j_wbuf; /** * @j_fc_wbuf: Array of fast commit bhs for fast commit. Accessed only * during a fast commit. Currently only process can do fast commit, so * this field is not protected by any lock. */ struct buffer_head **j_fc_wbuf; /** * @j_wbufsize: * * Size of @j_wbuf array. */ int j_wbufsize; /** * @j_fc_wbufsize: * * Size of @j_fc_wbuf array. */ int j_fc_wbufsize; /** * @j_last_sync_writer: * * The pid of the last person to run a synchronous operation * through the journal. */ pid_t j_last_sync_writer; /** * @j_average_commit_time: * * The average amount of time in nanoseconds it takes to commit a * transaction to disk. [j_state_lock] */ u64 j_average_commit_time; /** * @j_min_batch_time: * * Minimum time that we should wait for additional filesystem operations * to get batched into a synchronous handle in microseconds. */ u32 j_min_batch_time; /** * @j_max_batch_time: * * Maximum time that we should wait for additional filesystem operations * to get batched into a synchronous handle in microseconds. */ u32 j_max_batch_time; /** * @j_commit_callback: * * This function is called when a transaction is closed. */ void (*j_commit_callback)(journal_t *, transaction_t *); /** * @j_submit_inode_data_buffers: * * This function is called for all inodes associated with the * committing transaction marked with JI_WRITE_DATA flag * before we start to write out the transaction to the journal. */ int (*j_submit_inode_data_buffers) (struct jbd2_inode *); /** * @j_finish_inode_data_buffers: * * This function is called for all inodes associated with the * committing transaction marked with JI_WAIT_DATA flag * after we have written the transaction to the journal * but before we write out the commit block. */ int (*j_finish_inode_data_buffers) (struct jbd2_inode *); /* * Journal statistics */ /** * @j_history_lock: Protect the transactions statistics history. */ spinlock_t j_history_lock; /** * @j_proc_entry: procfs entry for the jbd statistics directory. */ struct proc_dir_entry *j_proc_entry; /** * @j_stats: Overall statistics. */ struct transaction_stats_s j_stats; /** * @j_failed_commit: Failed journal commit ID. */ unsigned int j_failed_commit; /** * @j_private: * * An opaque pointer to fs-private information. ext3 puts its * superblock pointer here. */ void *j_private; /** * @j_chksum_driver: * * Reference to checksum algorithm driver via cryptoapi. */ struct crypto_shash *j_chksum_driver; /** * @j_csum_seed: * * Precomputed journal UUID checksum for seeding other checksums. */ __u32 j_csum_seed; #ifdef CONFIG_DEBUG_LOCK_ALLOC /** * @j_trans_commit_map: * * Lockdep entity to track transaction commit dependencies. Handles * hold this "lock" for read, when we wait for commit, we acquire the * "lock" for writing. This matches the properties of jbd2 journalling * where the running transaction has to wait for all handles to be * dropped to commit that transaction and also acquiring a handle may * require transaction commit to finish. */ struct lockdep_map j_trans_commit_map; #endif /** * @j_fc_cleanup_callback: * * Clean-up after fast commit or full commit. JBD2 calls this function * after every commit operation. */ void (*j_fc_cleanup_callback)(struct journal_s *journal, int); /** * @j_fc_replay_callback: * * File-system specific function that performs replay of a fast * commit. JBD2 calls this function for each fast commit block found in * the journal. This function should return JBD2_FC_REPLAY_CONTINUE * to indicate that the block was processed correctly and more fast * commit replay should continue. Return value of JBD2_FC_REPLAY_STOP * indicates the end of replay (no more blocks remaining). A negative * return value indicates error. */ int (*j_fc_replay_callback)(struct journal_s *journal, struct buffer_head *bh, enum passtype pass, int off, tid_t expected_commit_id); }; #define jbd2_might_wait_for_commit(j) \ do { \ rwsem_acquire(&j->j_trans_commit_map, 0, 0, _THIS_IP_); \ rwsem_release(&j->j_trans_commit_map, _THIS_IP_); \ } while (0) /* journal feature predicate functions */ #define JBD2_FEATURE_COMPAT_FUNCS(name, flagname) \ static inline bool jbd2_has_feature_##name(journal_t *j) \ { \ return ((j)->j_format_version >= 2 && \ ((j)->j_superblock->s_feature_compat & \ cpu_to_be32(JBD2_FEATURE_COMPAT_##flagname)) != 0); \ } \ static inline void jbd2_set_feature_##name(journal_t *j) \ { \ (j)->j_superblock->s_feature_compat |= \ cpu_to_be32(JBD2_FEATURE_COMPAT_##flagname); \ } \ static inline void jbd2_clear_feature_##name(journal_t *j) \ { \ (j)->j_superblock->s_feature_compat &= \ ~cpu_to_be32(JBD2_FEATURE_COMPAT_##flagname); \ } #define JBD2_FEATURE_RO_COMPAT_FUNCS(name, flagname) \ static inline bool jbd2_has_feature_##name(journal_t *j) \ { \ return ((j)->j_format_version >= 2 && \ ((j)->j_superblock->s_feature_ro_compat & \ cpu_to_be32(JBD2_FEATURE_RO_COMPAT_##flagname)) != 0); \ } \ static inline void jbd2_set_feature_##name(journal_t *j) \ { \ (j)->j_superblock->s_feature_ro_compat |= \ cpu_to_be32(JBD2_FEATURE_RO_COMPAT_##flagname); \ } \ static inline void jbd2_clear_feature_##name(journal_t *j) \ { \ (j)->j_superblock->s_feature_ro_compat &= \ ~cpu_to_be32(JBD2_FEATURE_RO_COMPAT_##flagname); \ } #define JBD2_FEATURE_INCOMPAT_FUNCS(name, flagname) \ static inline bool jbd2_has_feature_##name(journal_t *j) \ { \ return ((j)->j_format_version >= 2 && \ ((j)->j_superblock->s_feature_incompat & \ cpu_to_be32(JBD2_FEATURE_INCOMPAT_##flagname)) != 0); \ } \ static inline void jbd2_set_feature_##name(journal_t *j) \ { \ (j)->j_superblock->s_feature_incompat |= \ cpu_to_be32(JBD2_FEATURE_INCOMPAT_##flagname); \ } \ static inline void jbd2_clear_feature_##name(journal_t *j) \ { \ (j)->j_superblock->s_feature_incompat &= \ ~cpu_to_be32(JBD2_FEATURE_INCOMPAT_##flagname); \ } JBD2_FEATURE_COMPAT_FUNCS(checksum, CHECKSUM) JBD2_FEATURE_INCOMPAT_FUNCS(revoke, REVOKE) JBD2_FEATURE_INCOMPAT_FUNCS(64bit, 64BIT) JBD2_FEATURE_INCOMPAT_FUNCS(async_commit, ASYNC_COMMIT) JBD2_FEATURE_INCOMPAT_FUNCS(csum2, CSUM_V2) JBD2_FEATURE_INCOMPAT_FUNCS(csum3, CSUM_V3) JBD2_FEATURE_INCOMPAT_FUNCS(fast_commit, FAST_COMMIT) /* * Journal flag definitions */ #define JBD2_UNMOUNT 0x001 /* Journal thread is being destroyed */ #define JBD2_ABORT 0x002 /* Journaling has been aborted for errors. */ #define JBD2_ACK_ERR 0x004 /* The errno in the sb has been acked */ #define JBD2_FLUSHED 0x008 /* The journal superblock has been flushed */ #define JBD2_LOADED 0x010 /* The journal superblock has been loaded */ #define JBD2_BARRIER 0x020 /* Use IDE barriers */ #define JBD2_ABORT_ON_SYNCDATA_ERR 0x040 /* Abort the journal on file * data write error in ordered * mode */ #define JBD2_FAST_COMMIT_ONGOING 0x100 /* Fast commit is ongoing */ #define JBD2_FULL_COMMIT_ONGOING 0x200 /* Full commit is ongoing */ /* * Function declarations for the journaling transaction and buffer * management */ /* Filing buffers */ extern void jbd2_journal_unfile_buffer(journal_t *, struct journal_head *); extern bool __jbd2_journal_refile_buffer(struct journal_head *); extern void jbd2_journal_refile_buffer(journal_t *, struct journal_head *); extern void __jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int); extern void __journal_free_buffer(struct journal_head *bh); extern void jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int); extern void __journal_clean_data_list(transaction_t *transaction); static inline void jbd2_file_log_bh(struct list_head *head, struct buffer_head *bh) { list_add_tail(&bh->b_assoc_buffers, head); } static inline void jbd2_unfile_log_bh(struct buffer_head *bh) { list_del_init(&bh->b_assoc_buffers); } /* Log buffer allocation */ struct buffer_head *jbd2_journal_get_descriptor_buffer(transaction_t *, int); void jbd2_descriptor_block_csum_set(journal_t *, struct buffer_head *); int jbd2_journal_next_log_block(journal_t *, unsigned long long *); int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid, unsigned long *block); int __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); /* Commit management */ extern void jbd2_journal_commit_transaction(journal_t *); /* Checkpoint list management */ void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy); int __jbd2_journal_remove_checkpoint(struct journal_head *); void jbd2_journal_destroy_checkpoint(journal_t *journal); void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *); /* * Triggers */ struct jbd2_buffer_trigger_type { /* * Fired a the moment data to write to the journal are known to be * stable - so either at the moment b_frozen_data is created or just * before a buffer is written to the journal. mapped_data is a mapped * buffer that is the frozen data for commit. */ void (*t_frozen)(struct jbd2_buffer_trigger_type *type, struct buffer_head *bh, void *mapped_data, size_t size); /* * Fired during journal abort for dirty buffers that will not be * committed. */ void (*t_abort)(struct jbd2_buffer_trigger_type *type, struct buffer_head *bh); }; extern void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data, struct jbd2_buffer_trigger_type *triggers); extern void jbd2_buffer_abort_trigger(struct journal_head *jh, struct jbd2_buffer_trigger_type *triggers); /* Buffer IO */ extern int jbd2_journal_write_metadata_buffer(transaction_t *transaction, struct journal_head *jh_in, struct buffer_head **bh_out, sector_t blocknr); /* Transaction locking */ extern void __wait_on_journal (journal_t *); /* Transaction cache support */ extern void jbd2_journal_destroy_transaction_cache(void); extern int __init jbd2_journal_init_transaction_cache(void); extern void jbd2_journal_free_transaction(transaction_t *); /* * Journal locking. * * We need to lock the journal during transaction state changes so that nobody * ever tries to take a handle on the running transaction while we are in the * middle of moving it to the commit phase. j_state_lock does this. * * Note that the locking is completely interrupt unsafe. We never touch * journal structures from interrupts. */ static inline handle_t *journal_current_handle(void) { return current->journal_info; } /* The journaling code user interface: * * Create and destroy handles * Register buffer modifications against the current transaction. */ extern handle_t *jbd2_journal_start(journal_t *, int nblocks); extern handle_t *jbd2__journal_start(journal_t *, int blocks, int rsv_blocks, int revoke_records, gfp_t gfp_mask, unsigned int type, unsigned int line_no); extern int jbd2_journal_restart(handle_t *, int nblocks); extern int jbd2__journal_restart(handle_t *, int nblocks, int revoke_records, gfp_t gfp_mask); extern int jbd2_journal_start_reserved(handle_t *handle, unsigned int type, unsigned int line_no); extern void jbd2_journal_free_reserved(handle_t *handle); extern int jbd2_journal_extend(handle_t *handle, int nblocks, int revoke_records); extern int jbd2_journal_get_write_access(handle_t *, struct buffer_head *); extern int jbd2_journal_get_create_access (handle_t *, struct buffer_head *); extern int jbd2_journal_get_undo_access(handle_t *, struct buffer_head *); void jbd2_journal_set_triggers(struct buffer_head *, struct jbd2_buffer_trigger_type *type); extern int jbd2_journal_dirty_metadata (handle_t *, struct buffer_head *); extern int jbd2_journal_forget (handle_t *, struct buffer_head *); extern int jbd2_journal_invalidatepage(journal_t *, struct page *, unsigned int, unsigned int); extern int jbd2_journal_try_to_free_buffers(journal_t *journal, struct page *page); extern int jbd2_journal_stop(handle_t *); extern int jbd2_journal_flush (journal_t *); extern void jbd2_journal_lock_updates (journal_t *); extern void jbd2_journal_unlock_updates (journal_t *); extern journal_t * jbd2_journal_init_dev(struct block_device *bdev, struct block_device *fs_dev, unsigned long long start, int len, int bsize); extern journal_t * jbd2_journal_init_inode (struct inode *); extern int jbd2_journal_update_format (journal_t *); extern int jbd2_journal_check_used_features (journal_t *, unsigned long, unsigned long, unsigned long); extern int jbd2_journal_check_available_features (journal_t *, unsigned long, unsigned long, unsigned long); extern int jbd2_journal_set_features (journal_t *, unsigned long, unsigned long, unsigned long); extern void jbd2_journal_clear_features (journal_t *, unsigned long, unsigned long, unsigned long); extern int jbd2_journal_load (journal_t *journal); extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); extern void jbd2_journal_update_sb_errno(journal_t *); extern int jbd2_journal_update_sb_log_tail (journal_t *, tid_t, unsigned long, int); extern void jbd2_journal_abort (journal_t *, int); extern int jbd2_journal_errno (journal_t *); extern void jbd2_journal_ack_err (journal_t *); extern int jbd2_journal_clear_err (journal_t *); extern int jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *); extern int jbd2_journal_force_commit(journal_t *); extern int jbd2_journal_force_commit_nested(journal_t *); extern int jbd2_journal_inode_ranged_write(handle_t *handle, struct jbd2_inode *inode, loff_t start_byte, loff_t length); extern int jbd2_journal_inode_ranged_wait(handle_t *handle, struct jbd2_inode *inode, loff_t start_byte, loff_t length); extern int jbd2_journal_submit_inode_data_buffers( struct jbd2_inode *jinode); extern int jbd2_journal_finish_inode_data_buffers( struct jbd2_inode *jinode); extern int jbd2_journal_begin_ordered_truncate(journal_t *journal, struct jbd2_inode *inode, loff_t new_size); extern void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode); extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode); /* * journal_head management */ struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh); struct journal_head *jbd2_journal_grab_journal_head(struct buffer_head *bh); void jbd2_journal_put_journal_head(struct journal_head *jh); /* * handle management */ extern struct kmem_cache *jbd2_handle_cache; static inline handle_t *jbd2_alloc_handle(gfp_t gfp_flags) { return kmem_cache_zalloc(jbd2_handle_cache, gfp_flags); } static inline void jbd2_free_handle(handle_t *handle) { kmem_cache_free(jbd2_handle_cache, handle); } /* * jbd2_inode management (optional, for those file systems that want to use * dynamically allocated jbd2_inode structures) */ extern struct kmem_cache *jbd2_inode_cache; static inline struct jbd2_inode *jbd2_alloc_inode(gfp_t gfp_flags) { return kmem_cache_alloc(jbd2_inode_cache, gfp_flags); } static inline void jbd2_free_inode(struct jbd2_inode *jinode) { kmem_cache_free(jbd2_inode_cache, jinode); } /* Primary revoke support */ #define JOURNAL_REVOKE_DEFAULT_HASH 256 extern int jbd2_journal_init_revoke(journal_t *, int); extern void jbd2_journal_destroy_revoke_record_cache(void); extern void jbd2_journal_destroy_revoke_table_cache(void); extern int __init jbd2_journal_init_revoke_record_cache(void); extern int __init jbd2_journal_init_revoke_table_cache(void); extern void jbd2_journal_destroy_revoke(journal_t *); extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *); extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *); extern void jbd2_journal_write_revoke_records(transaction_t *transaction, struct list_head *log_bufs); /* Recovery revoke support */ extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t); extern int jbd2_journal_test_revoke(journal_t *, unsigned long long, tid_t); extern void jbd2_journal_clear_revoke(journal_t *); extern void jbd2_journal_switch_revoke_table(journal_t *journal); extern void jbd2_clear_buffer_revoked_flags(journal_t *journal); /* * The log thread user interface: * * Request space in the current transaction, and force transaction commit * transitions on demand. */ int jbd2_log_start_commit(journal_t *journal, tid_t tid); int __jbd2_log_start_commit(journal_t *journal, tid_t tid); int jbd2_journal_start_commit(journal_t *journal, tid_t *tid); int jbd2_log_wait_commit(journal_t *journal, tid_t tid); int jbd2_transaction_committed(journal_t *journal, tid_t tid); int jbd2_complete_transaction(journal_t *journal, tid_t tid); int jbd2_log_do_checkpoint(journal_t *journal); int jbd2_trans_will_send_data_barrier(journal_t *journal, tid_t tid); void __jbd2_log_wait_for_space(journal_t *journal); extern void __jbd2_journal_drop_transaction(journal_t *, transaction_t *); extern int jbd2_cleanup_journal_tail(journal_t *); /* Fast commit related APIs */ int jbd2_fc_begin_commit(journal_t *journal, tid_t tid); int jbd2_fc_end_commit(journal_t *journal); int jbd2_fc_end_commit_fallback(journal_t *journal); int jbd2_fc_get_buf(journal_t *journal, struct buffer_head **bh_out); int jbd2_submit_inode_data(struct jbd2_inode *jinode); int jbd2_wait_inode_data(journal_t *journal, struct jbd2_inode *jinode); int jbd2_fc_wait_bufs(journal_t *journal, int num_blks); int jbd2_fc_release_bufs(journal_t *journal); static inline int jbd2_journal_get_max_txn_bufs(journal_t *journal) { return (journal->j_total_len - journal->j_fc_wbufsize) / 4; } /* * is_journal_abort * * Simple test wrapper function to test the JBD2_ABORT state flag. This * bit, when set, indicates that we have had a fatal error somewhere, * either inside the journaling layer or indicated to us by the client * (eg. ext3), and that we and should not commit any further * transactions. */ static inline int is_journal_aborted(journal_t *journal) { return journal->j_flags & JBD2_ABORT; } static inline int is_handle_aborted(handle_t *handle) { if (handle->h_aborted || !handle->h_transaction) return 1; return is_journal_aborted(handle->h_transaction->t_journal); } static inline void jbd2_journal_abort_handle(handle_t *handle) { handle->h_aborted = 1; } #endif /* __KERNEL__ */ /* Comparison functions for transaction IDs: perform comparisons using * modulo arithmetic so that they work over sequence number wraps. */ static inline int tid_gt(tid_t x, tid_t y) { int difference = (x - y); return (difference > 0); } static inline int tid_geq(tid_t x, tid_t y) { int difference = (x - y); return (difference >= 0); } extern int jbd2_journal_blocks_per_page(struct inode *inode); extern size_t journal_tag_bytes(journal_t *journal); static inline bool jbd2_journal_has_csum_v2or3_feature(journal_t *j) { return jbd2_has_feature_csum2(j) || jbd2_has_feature_csum3(j); } static inline int jbd2_journal_has_csum_v2or3(journal_t *journal) { WARN_ON_ONCE(jbd2_journal_has_csum_v2or3_feature(journal) && journal->j_chksum_driver == NULL); return journal->j_chksum_driver != NULL; } /* * Return number of free blocks in the log. Must be called under j_state_lock. */ static inline unsigned long jbd2_log_space_left(journal_t *journal) { /* Allow for rounding errors */ long free = journal->j_free - 32; if (journal->j_committing_transaction) { free -= atomic_read(&journal-> j_committing_transaction->t_outstanding_credits); } return max_t(long, free, 0); } /* * Definitions which augment the buffer_head layer */ /* journaling buffer types */ #define BJ_None 0 /* Not journaled */ #define BJ_Metadata 1 /* Normal journaled metadata */ #define BJ_Forget 2 /* Buffer superseded by this transaction */ #define BJ_Shadow 3 /* Buffer contents being shadowed to the log */ #define BJ_Reserved 4 /* Buffer is reserved for access by journal */ #define BJ_Types 5 extern int jbd_blocks_per_page(struct inode *inode); /* JBD uses a CRC32 checksum */ #define JBD_MAX_CHECKSUM_SIZE 4 static inline u32 jbd2_chksum(journal_t *journal, u32 crc, const void *address, unsigned int length) { struct { struct shash_desc shash; char ctx[JBD_MAX_CHECKSUM_SIZE]; } desc; int err; BUG_ON(crypto_shash_descsize(journal->j_chksum_driver) > JBD_MAX_CHECKSUM_SIZE); desc.shash.tfm = journal->j_chksum_driver; *(u32 *)desc.ctx = crc; err = crypto_shash_update(&desc.shash, address, length); BUG_ON(err); return *(u32 *)desc.ctx; } /* Return most recent uncommitted transaction */ static inline tid_t jbd2_get_latest_transaction(journal_t *journal) { tid_t tid; read_lock(&journal->j_state_lock); tid = journal->j_commit_request; if (journal->j_running_transaction) tid = journal->j_running_transaction->t_tid; read_unlock(&journal->j_state_lock); return tid; } static inline int jbd2_handle_buffer_credits(handle_t *handle) { journal_t *journal; if (!handle->h_reserved) journal = handle->h_transaction->t_journal; else journal = handle->h_journal; return handle->h_total_credits - DIV_ROUND_UP(handle->h_revoke_credits_requested, journal->j_revoke_records_per_block); } #ifdef __KERNEL__ #define buffer_trace_init(bh) do {} while (0) #define print_buffer_fields(bh) do {} while (0) #define print_buffer_trace(bh) do {} while (0) #define BUFFER_TRACE(bh, info) do {} while (0) #define BUFFER_TRACE2(bh, bh2, info) do {} while (0) #define JBUFFER_TRACE(jh, info) do {} while (0) #endif /* __KERNEL__ */ #define EFSBADCRC EBADMSG /* Bad CRC detected */ #define EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ #endif /* _LINUX_JBD2_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs */ #ifndef _ASM_X86_STACKTRACE_H #define _ASM_X86_STACKTRACE_H #include <linux/uaccess.h> #include <linux/ptrace.h> #include <asm/cpu_entry_area.h> #include <asm/switch_to.h> enum stack_type { STACK_TYPE_UNKNOWN, STACK_TYPE_TASK, STACK_TYPE_IRQ, STACK_TYPE_SOFTIRQ, STACK_TYPE_ENTRY, STACK_TYPE_EXCEPTION, STACK_TYPE_EXCEPTION_LAST = STACK_TYPE_EXCEPTION + N_EXCEPTION_STACKS-1, }; struct stack_info { enum stack_type type; unsigned long *begin, *end, *next_sp; }; bool in_task_stack(unsigned long *stack, struct task_struct *task, struct stack_info *info); bool in_entry_stack(unsigned long *stack, struct stack_info *info); int get_stack_info(unsigned long *stack, struct task_struct *task, struct stack_info *info, unsigned long *visit_mask); bool get_stack_info_noinstr(unsigned long *stack, struct task_struct *task, struct stack_info *info); const char *stack_type_name(enum stack_type type); static inline bool on_stack(struct stack_info *info, void *addr, size_t len) { void *begin = info->begin; void *end = info->end; return (info->type != STACK_TYPE_UNKNOWN && addr >= begin && addr < end && addr + len > begin && addr + len <= end); } #ifdef CONFIG_X86_32 #define STACKSLOTS_PER_LINE 8 #else #define STACKSLOTS_PER_LINE 4 #endif #ifdef CONFIG_FRAME_POINTER static inline unsigned long * get_frame_pointer(struct task_struct *task, struct pt_regs *regs) { if (regs) return (unsigned long *)regs->bp; if (task == current) return __builtin_frame_address(0); return &((struct inactive_task_frame *)task->thread.sp)->bp; } #else static inline unsigned long * get_frame_pointer(struct task_struct *task, struct pt_regs *regs) { return NULL; } #endif /* CONFIG_FRAME_POINTER */ static inline unsigned long * get_stack_pointer(struct task_struct *task, struct pt_regs *regs) { if (regs) return (unsigned long *)regs->sp; if (task == current) return __builtin_frame_address(0); return (unsigned long *)task->thread.sp; } void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, const char *log_lvl); /* The form of the top of the frame on the stack */ struct stack_frame { struct stack_frame *next_frame; unsigned long return_address; }; struct stack_frame_ia32 { u32 next_frame; u32 return_address; }; void show_opcodes(struct pt_regs *regs, const char *loglvl); void show_ip(struct pt_regs *regs, const char *loglvl); #endif /* _ASM_X86_STACKTRACE_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * ALSA sequencer Timer * Copyright (c) 1998-1999 by Frank van de Pol <fvdpol@coil.demon.nl> */ #ifndef __SND_SEQ_TIMER_H #define __SND_SEQ_TIMER_H #include <sound/timer.h> #include <sound/seq_kernel.h> struct snd_seq_timer_tick { snd_seq_tick_time_t cur_tick; /* current tick */ unsigned long resolution; /* time per tick in nsec */ unsigned long fraction; /* current time per tick in nsec */ }; struct snd_seq_timer { /* ... tempo / offset / running state */ unsigned int running:1, /* running state of queue */ initialized:1; /* timer is initialized */ unsigned int tempo; /* current tempo, us/tick */ int ppq; /* time resolution, ticks/quarter */ snd_seq_real_time_t cur_time; /* current time */ struct snd_seq_timer_tick tick; /* current tick */ int tick_updated; int type; /* timer type */ struct snd_timer_id alsa_id; /* ALSA's timer ID */ struct snd_timer_instance *timeri; /* timer instance */ unsigned int ticks; unsigned long preferred_resolution; /* timer resolution, ticks/sec */ unsigned int skew; unsigned int skew_base; struct timespec64 last_update; /* time of last clock update, used for interpolation */ spinlock_t lock; }; /* create new timer (constructor) */ struct snd_seq_timer *snd_seq_timer_new(void); /* delete timer (destructor) */ void snd_seq_timer_delete(struct snd_seq_timer **tmr); /* */ static inline void snd_seq_timer_update_tick(struct snd_seq_timer_tick *tick, unsigned long resolution) { if (tick->resolution > 0) { tick->fraction += resolution; tick->cur_tick += (unsigned int)(tick->fraction / tick->resolution); tick->fraction %= tick->resolution; } } /* compare timestamp between events */ /* return 1 if a >= b; otherwise return 0 */ static inline int snd_seq_compare_tick_time(snd_seq_tick_time_t *a, snd_seq_tick_time_t *b) { /* compare ticks */ return (*a >= *b); } static inline int snd_seq_compare_real_time(snd_seq_real_time_t *a, snd_seq_real_time_t *b) { /* compare real time */ if (a->tv_sec > b->tv_sec) return 1; if ((a->tv_sec == b->tv_sec) && (a->tv_nsec >= b->tv_nsec)) return 1; return 0; } static inline void snd_seq_sanity_real_time(snd_seq_real_time_t *tm) { while (tm->tv_nsec >= 1000000000) { /* roll-over */ tm->tv_nsec -= 1000000000; tm->tv_sec++; } } /* increment timestamp */ static inline void snd_seq_inc_real_time(snd_seq_real_time_t *tm, snd_seq_real_time_t *inc) { tm->tv_sec += inc->tv_sec; tm->tv_nsec += inc->tv_nsec; snd_seq_sanity_real_time(tm); } static inline void snd_seq_inc_time_nsec(snd_seq_real_time_t *tm, unsigned long nsec) { tm->tv_nsec += nsec; snd_seq_sanity_real_time(tm); } /* called by timer isr */ struct snd_seq_queue; int snd_seq_timer_open(struct snd_seq_queue *q); int snd_seq_timer_close(struct snd_seq_queue *q); int snd_seq_timer_midi_open(struct snd_seq_queue *q); int snd_seq_timer_midi_close(struct snd_seq_queue *q); void snd_seq_timer_defaults(struct snd_seq_timer *tmr); void snd_seq_timer_reset(struct snd_seq_timer *tmr); int snd_seq_timer_stop(struct snd_seq_timer *tmr); int snd_seq_timer_start(struct snd_seq_timer *tmr); int snd_seq_timer_continue(struct snd_seq_timer *tmr); int snd_seq_timer_set_tempo(struct snd_seq_timer *tmr, int tempo); int snd_seq_timer_set_tempo_ppq(struct snd_seq_timer *tmr, int tempo, int ppq); int snd_seq_timer_set_position_tick(struct snd_seq_timer *tmr, snd_seq_tick_time_t position); int snd_seq_timer_set_position_time(struct snd_seq_timer *tmr, snd_seq_real_time_t position); int snd_seq_timer_set_skew(struct snd_seq_timer *tmr, unsigned int skew, unsigned int base); snd_seq_real_time_t snd_seq_timer_get_cur_time(struct snd_seq_timer *tmr, bool adjust_ktime); snd_seq_tick_time_t snd_seq_timer_get_cur_tick(struct snd_seq_timer *tmr); extern int seq_default_timer_class; extern int seq_default_timer_sclass; extern int seq_default_timer_card; extern int seq_default_timer_device; extern int seq_default_timer_subdevice; extern int seq_default_timer_resolution; #endif
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 /* SPDX-License-Identifier: GPL-2.0 */ /* * include/linux/pagevec.h * * In many places it is efficient to batch an operation up against multiple * pages. A pagevec is a multipage container which is used for that. */ #ifndef _LINUX_PAGEVEC_H #define _LINUX_PAGEVEC_H #include <linux/xarray.h> /* 15 pointers + header align the pagevec structure to a power of two */ #define PAGEVEC_SIZE 15 struct page; struct address_space; struct pagevec { unsigned char nr; bool percpu_pvec_drained; struct page *pages[PAGEVEC_SIZE]; }; void __pagevec_release(struct pagevec *pvec); void __pagevec_lru_add(struct pagevec *pvec); unsigned pagevec_lookup_entries(struct pagevec *pvec, struct address_space *mapping, pgoff_t start, unsigned nr_entries, pgoff_t *indices); void pagevec_remove_exceptionals(struct pagevec *pvec); unsigned pagevec_lookup_range(struct pagevec *pvec, struct address_space *mapping, pgoff_t *start, pgoff_t end); static inline unsigned pagevec_lookup(struct pagevec *pvec, struct address_space *mapping, pgoff_t *start) { return pagevec_lookup_range(pvec, mapping, start, (pgoff_t)-1); } unsigned pagevec_lookup_range_tag(struct pagevec *pvec, struct address_space *mapping, pgoff_t *index, pgoff_t end, xa_mark_t tag); unsigned pagevec_lookup_range_nr_tag(struct pagevec *pvec, struct address_space *mapping, pgoff_t *index, pgoff_t end, xa_mark_t tag, unsigned max_pages); static inline unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping, pgoff_t *index, xa_mark_t tag) { return pagevec_lookup_range_tag(pvec, mapping, index, (pgoff_t)-1, tag); } static inline void pagevec_init(struct pagevec *pvec) { pvec->nr = 0; pvec->percpu_pvec_drained = false; } static inline void pagevec_reinit(struct pagevec *pvec) { pvec->nr = 0; } static inline unsigned pagevec_count(struct pagevec *pvec) { return pvec->nr; } static inline unsigned pagevec_space(struct pagevec *pvec) { return PAGEVEC_SIZE - pvec->nr; } /* * Add a page to a pagevec. Returns the number of slots still available. */ static inline unsigned pagevec_add(struct pagevec *pvec, struct page *page) { pvec->pages[pvec->nr++] = page; return pagevec_space(pvec); } static inline void pagevec_release(struct pagevec *pvec) { if (pagevec_count(pvec)) __pagevec_release(pvec); } #endif /* _LINUX_PAGEVEC_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Definitions for the UDP module. * * Version: @(#)udp.h 1.0.2 05/07/93 * * Authors: Ross Biro * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> * * Fixes: * Alan Cox : Turned on udp checksums. I don't want to * chase 'memory corruption' bugs that aren't! */ #ifndef _UDP_H #define _UDP_H #include <linux/list.h> #include <linux/bug.h> #include <net/inet_sock.h> #include <net/sock.h> #include <net/snmp.h> #include <net/ip.h> #include <linux/ipv6.h> #include <linux/seq_file.h> #include <linux/poll.h> #include <linux/indirect_call_wrapper.h> /** * struct udp_skb_cb - UDP(-Lite) private variables * * @header: private variables used by IPv4/IPv6 * @cscov: checksum coverage length (UDP-Lite only) * @partial_cov: if set indicates partial csum coverage */ struct udp_skb_cb { union { struct inet_skb_parm h4; #if IS_ENABLED(CONFIG_IPV6) struct inet6_skb_parm h6; #endif } header; __u16 cscov; __u8 partial_cov; }; #define UDP_SKB_CB(__skb) ((struct udp_skb_cb *)((__skb)->cb)) /** * struct udp_hslot - UDP hash slot * * @head: head of list of sockets * @count: number of sockets in 'head' list * @lock: spinlock protecting changes to head/count */ struct udp_hslot { struct hlist_head head; int count; spinlock_t lock; } __attribute__((aligned(2 * sizeof(long)))); /** * struct udp_table - UDP table * * @hash: hash table, sockets are hashed on (local port) * @hash2: hash table, sockets are hashed on (local port, local address) * @mask: number of slots in hash tables, minus 1 * @log: log2(number of slots in hash table) */ struct udp_table { struct udp_hslot *hash; struct udp_hslot *hash2; unsigned int mask; unsigned int log; }; extern struct udp_table udp_table; void udp_table_init(struct udp_table *, const char *); static inline struct udp_hslot *udp_hashslot(struct udp_table *table, struct net *net, unsigned int num) { return &table->hash[udp_hashfn(net, num, table->mask)]; } /* * For secondary hash, net_hash_mix() is performed before calling * udp_hashslot2(), this explains difference with udp_hashslot() */ static inline struct udp_hslot *udp_hashslot2(struct udp_table *table, unsigned int hash) { return &table->hash2[hash & table->mask]; } extern struct proto udp_prot; extern atomic_long_t udp_memory_allocated; /* sysctl variables for udp */ extern long sysctl_udp_mem[3]; extern int sysctl_udp_rmem_min; extern int sysctl_udp_wmem_min; struct sk_buff; /* * Generic checksumming routines for UDP(-Lite) v4 and v6 */ static inline __sum16 __udp_lib_checksum_complete(struct sk_buff *skb) { return (UDP_SKB_CB(skb)->cscov == skb->len ? __skb_checksum_complete(skb) : __skb_checksum_complete_head(skb, UDP_SKB_CB(skb)->cscov)); } static inline int udp_lib_checksum_complete(struct sk_buff *skb) { return !skb_csum_unnecessary(skb) && __udp_lib_checksum_complete(skb); } /** * udp_csum_outgoing - compute UDPv4/v6 checksum over fragments * @sk: socket we are writing to * @skb: sk_buff containing the filled-in UDP header * (checksum field must be zeroed out) */ static inline __wsum udp_csum_outgoing(struct sock *sk, struct sk_buff *skb) { __wsum csum = csum_partial(skb_transport_header(skb), sizeof(struct udphdr), 0); skb_queue_walk(&sk->sk_write_queue, skb) { csum = csum_add(csum, skb->csum); } return csum; } static inline __wsum udp_csum(struct sk_buff *skb) { __wsum csum = csum_partial(skb_transport_header(skb), sizeof(struct udphdr), skb->csum); for (skb = skb_shinfo(skb)->frag_list; skb; skb = skb->next) { csum = csum_add(csum, skb->csum); } return csum; } static inline __sum16 udp_v4_check(int len, __be32 saddr, __be32 daddr, __wsum base) { return csum_tcpudp_magic(saddr, daddr, len, IPPROTO_UDP, base); } void udp_set_csum(bool nocheck, struct sk_buff *skb, __be32 saddr, __be32 daddr, int len); static inline void udp_csum_pull_header(struct sk_buff *skb) { if (!skb->csum_valid && skb->ip_summed == CHECKSUM_NONE) skb->csum = csum_partial(skb->data, sizeof(struct udphdr), skb->csum); skb_pull_rcsum(skb, sizeof(struct udphdr)); UDP_SKB_CB(skb)->cscov -= sizeof(struct udphdr); } typedef struct sock *(*udp_lookup_t)(struct sk_buff *skb, __be16 sport, __be16 dport); INDIRECT_CALLABLE_DECLARE(struct sk_buff *udp4_gro_receive(struct list_head *, struct sk_buff *)); INDIRECT_CALLABLE_DECLARE(int udp4_gro_complete(struct sk_buff *, int)); INDIRECT_CALLABLE_DECLARE(struct sk_buff *udp6_gro_receive(struct list_head *, struct sk_buff *)); INDIRECT_CALLABLE_DECLARE(int udp6_gro_complete(struct sk_buff *, int)); struct sk_buff *udp_gro_receive(struct list_head *head, struct sk_buff *skb, struct udphdr *uh, struct sock *sk); int udp_gro_complete(struct sk_buff *skb, int nhoff, udp_lookup_t lookup); struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb, netdev_features_t features, bool is_ipv6); static inline struct udphdr *udp_gro_udphdr(struct sk_buff *skb) { struct udphdr *uh; unsigned int hlen, off; off = skb_gro_offset(skb); hlen = off + sizeof(*uh); uh = skb_gro_header_fast(skb, off); if (skb_gro_header_hard(skb, hlen)) uh = skb_gro_header_slow(skb, hlen, off); return uh; } /* hash routines shared between UDPv4/6 and UDP-Litev4/6 */ static inline int udp_lib_hash(struct sock *sk) { BUG(); return 0; } void udp_lib_unhash(struct sock *sk); void udp_lib_rehash(struct sock *sk, u16 new_hash); static inline void udp_lib_close(struct sock *sk, long timeout) { sk_common_release(sk); } int udp_lib_get_port(struct sock *sk, unsigned short snum, unsigned int hash2_nulladdr); u32 udp_flow_hashrnd(void); static inline __be16 udp_flow_src_port(struct net *net, struct sk_buff *skb, int min, int max, bool use_eth) { u32 hash; if (min >= max) { /* Use default range */ inet_get_local_port_range(net, &min, &max); } hash = skb_get_hash(skb); if (unlikely(!hash)) { if (use_eth) { /* Can't find a normal hash, caller has indicated an * Ethernet packet so use that to compute a hash. */ hash = jhash(skb->data, 2 * ETH_ALEN, (__force u32) skb->protocol); } else { /* Can't derive any sort of hash for the packet, set * to some consistent random value. */ hash = udp_flow_hashrnd(); } } /* Since this is being sent on the wire obfuscate hash a bit * to minimize possbility that any useful information to an * attacker is leaked. Only upper 16 bits are relevant in the * computation for 16 bit port value. */ hash ^= hash << 16; return htons((((u64) hash * (max - min)) >> 32) + min); } static inline int udp_rqueue_get(struct sock *sk) { return sk_rmem_alloc_get(sk) - READ_ONCE(udp_sk(sk)->forward_deficit); } static inline bool udp_sk_bound_dev_eq(struct net *net, int bound_dev_if, int dif, int sdif) { #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV) return inet_bound_dev_eq(!!net->ipv4.sysctl_udp_l3mdev_accept, bound_dev_if, dif, sdif); #else return inet_bound_dev_eq(true, bound_dev_if, dif, sdif); #endif } /* net/ipv4/udp.c */ void udp_destruct_sock(struct sock *sk); void skb_consume_udp(struct sock *sk, struct sk_buff *skb, int len); int __udp_enqueue_schedule_skb(struct sock *sk, struct sk_buff *skb); void udp_skb_destructor(struct sock *sk, struct sk_buff *skb); struct sk_buff *__skb_recv_udp(struct sock *sk, unsigned int flags, int noblock, int *off, int *err); static inline struct sk_buff *skb_recv_udp(struct sock *sk, unsigned int flags, int noblock, int *err) { int off = 0; return __skb_recv_udp(sk, flags, noblock, &off, err); } int udp_v4_early_demux(struct sk_buff *skb); bool udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst); int udp_get_port(struct sock *sk, unsigned short snum, int (*saddr_cmp)(const struct sock *, const struct sock *)); int udp_err(struct sk_buff *, u32); int udp_abort(struct sock *sk, int err); int udp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len); int udp_push_pending_frames(struct sock *sk); void udp_flush_pending_frames(struct sock *sk); int udp_cmsg_send(struct sock *sk, struct msghdr *msg, u16 *gso_size); void udp4_hwcsum(struct sk_buff *skb, __be32 src, __be32 dst); int udp_rcv(struct sk_buff *skb); int udp_ioctl(struct sock *sk, int cmd, unsigned long arg); int udp_init_sock(struct sock *sk); int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); int __udp_disconnect(struct sock *sk, int flags); int udp_disconnect(struct sock *sk, int flags); __poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait); struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb, netdev_features_t features, bool is_ipv6); int udp_lib_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); int udp_lib_setsockopt(struct sock *sk, int level, int optname, sockptr_t optval, unsigned int optlen, int (*push_pending_frames)(struct sock *)); struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport, __be32 daddr, __be16 dport, int dif); struct sock *__udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport, __be32 daddr, __be16 dport, int dif, int sdif, struct udp_table *tbl, struct sk_buff *skb); struct sock *udp4_lib_lookup_skb(struct sk_buff *skb, __be16 sport, __be16 dport); struct sock *udp6_lib_lookup(struct net *net, const struct in6_addr *saddr, __be16 sport, const struct in6_addr *daddr, __be16 dport, int dif); struct sock *__udp6_lib_lookup(struct net *net, const struct in6_addr *saddr, __be16 sport, const struct in6_addr *daddr, __be16 dport, int dif, int sdif, struct udp_table *tbl, struct sk_buff *skb); struct sock *udp6_lib_lookup_skb(struct sk_buff *skb, __be16 sport, __be16 dport); /* UDP uses skb->dev_scratch to cache as much information as possible and avoid * possibly multiple cache miss on dequeue() */ struct udp_dev_scratch { /* skb->truesize and the stateless bit are embedded in a single field; * do not use a bitfield since the compiler emits better/smaller code * this way */ u32 _tsize_state; #if BITS_PER_LONG == 64 /* len and the bit needed to compute skb_csum_unnecessary * will be on cold cache lines at recvmsg time. * skb->len can be stored on 16 bits since the udp header has been * already validated and pulled. */ u16 len; bool is_linear; bool csum_unnecessary; #endif }; static inline struct udp_dev_scratch *udp_skb_scratch(struct sk_buff *skb) { return (struct udp_dev_scratch *)&skb->dev_scratch; } #if BITS_PER_LONG == 64 static inline unsigned int udp_skb_len(struct sk_buff *skb) { return udp_skb_scratch(skb)->len; } static inline bool udp_skb_csum_unnecessary(struct sk_buff *skb) { return udp_skb_scratch(skb)->csum_unnecessary; } static inline bool udp_skb_is_linear(struct sk_buff *skb) { return udp_skb_scratch(skb)->is_linear; } #else static inline unsigned int udp_skb_len(struct sk_buff *skb) { return skb->len; } static inline bool udp_skb_csum_unnecessary(struct sk_buff *skb) { return skb_csum_unnecessary(skb); } static inline bool udp_skb_is_linear(struct sk_buff *skb) { return !skb_is_nonlinear(skb); } #endif static inline int copy_linear_skb(struct sk_buff *skb, int len, int off, struct iov_iter *to) { int n; n = copy_to_iter(skb->data + off, len, to); if (n == len) return 0; iov_iter_revert(to, n); return -EFAULT; } /* * SNMP statistics for UDP and UDP-Lite */ #define UDP_INC_STATS(net, field, is_udplite) do { \ if (is_udplite) SNMP_INC_STATS((net)->mib.udplite_statistics, field); \ else SNMP_INC_STATS((net)->mib.udp_statistics, field); } while(0) #define __UDP_INC_STATS(net, field, is_udplite) do { \ if (is_udplite) __SNMP_INC_STATS((net)->mib.udplite_statistics, field); \ else __SNMP_INC_STATS((net)->mib.udp_statistics, field); } while(0) #define __UDP6_INC_STATS(net, field, is_udplite) do { \ if (is_udplite) __SNMP_INC_STATS((net)->mib.udplite_stats_in6, field);\ else __SNMP_INC_STATS((net)->mib.udp_stats_in6, field); \ } while(0) #define UDP6_INC_STATS(net, field, __lite) do { \ if (__lite) SNMP_INC_STATS((net)->mib.udplite_stats_in6, field); \ else SNMP_INC_STATS((net)->mib.udp_stats_in6, field); \ } while(0) #if IS_ENABLED(CONFIG_IPV6) #define __UDPX_MIB(sk, ipv4) \ ({ \ ipv4 ? (IS_UDPLITE(sk) ? sock_net(sk)->mib.udplite_statistics : \ sock_net(sk)->mib.udp_statistics) : \ (IS_UDPLITE(sk) ? sock_net(sk)->mib.udplite_stats_in6 : \ sock_net(sk)->mib.udp_stats_in6); \ }) #else #define __UDPX_MIB(sk, ipv4) \ ({ \ IS_UDPLITE(sk) ? sock_net(sk)->mib.udplite_statistics : \ sock_net(sk)->mib.udp_statistics; \ }) #endif #define __UDPX_INC_STATS(sk, field) \ __SNMP_INC_STATS(__UDPX_MIB(sk, (sk)->sk_family == AF_INET), field) #ifdef CONFIG_PROC_FS struct udp_seq_afinfo { sa_family_t family; struct udp_table *udp_table; }; struct udp_iter_state { struct seq_net_private p; int bucket; struct udp_seq_afinfo *bpf_seq_afinfo; }; void *udp_seq_start(struct seq_file *seq, loff_t *pos); void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos); void udp_seq_stop(struct seq_file *seq, void *v); extern const struct seq_operations udp_seq_ops; extern const struct seq_operations udp6_seq_ops; int udp4_proc_init(void); void udp4_proc_exit(void); #endif /* CONFIG_PROC_FS */ int udpv4_offload_init(void); void udp_init(void); DECLARE_STATIC_KEY_FALSE(udp_encap_needed_key); void udp_encap_enable(void); #if IS_ENABLED(CONFIG_IPV6) DECLARE_STATIC_KEY_FALSE(udpv6_encap_needed_key); void udpv6_encap_enable(void); #endif static inline struct sk_buff *udp_rcv_segment(struct sock *sk, struct sk_buff *skb, bool ipv4) { netdev_features_t features = NETIF_F_SG; struct sk_buff *segs; /* Avoid csum recalculation by skb_segment unless userspace explicitly * asks for the final checksum values */ if (!inet_get_convert_csum(sk)) features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; /* UDP segmentation expects packets of type CHECKSUM_PARTIAL or * CHECKSUM_NONE in __udp_gso_segment. UDP GRO indeed builds partial * packets in udp_gro_complete_segment. As does UDP GSO, verified by * udp_send_skb. But when those packets are looped in dev_loopback_xmit * their ip_summed CHECKSUM_NONE is changed to CHECKSUM_UNNECESSARY. * Reset in this specific case, where PARTIAL is both correct and * required. */ if (skb->pkt_type == PACKET_LOOPBACK) skb->ip_summed = CHECKSUM_PARTIAL; /* the GSO CB lays after the UDP one, no need to save and restore any * CB fragment */ segs = __skb_gso_segment(skb, features, false); if (IS_ERR_OR_NULL(segs)) { int segs_nr = skb_shinfo(skb)->gso_segs; atomic_add(segs_nr, &sk->sk_drops); SNMP_ADD_STATS(__UDPX_MIB(sk, ipv4), UDP_MIB_INERRORS, segs_nr); kfree_skb(skb); return NULL; } consume_skb(skb); return segs; } #ifdef CONFIG_BPF_STREAM_PARSER struct sk_psock; struct proto *udp_bpf_get_proto(struct sock *sk, struct sk_psock *psock); #endif /* BPF_STREAM_PARSER */ #endif /* _UDP_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_SCHED_USER_H #define _LINUX_SCHED_USER_H #include <linux/uidgid.h> #include <linux/atomic.h> #include <linux/refcount.h> #include <linux/ratelimit.h> /* * Some day this will be a full-fledged user tracking system.. */ struct user_struct { refcount_t __count; /* reference count */ atomic_t processes; /* How many processes does this user have? */ atomic_t sigpending; /* How many pending signals does this user have? */ #ifdef CONFIG_FANOTIFY atomic_t fanotify_listeners; #endif #ifdef CONFIG_EPOLL atomic_long_t epoll_watches; /* The number of file descriptors currently watched */ #endif #ifdef CONFIG_POSIX_MQUEUE /* protected by mq_lock */ unsigned long mq_bytes; /* How many bytes can be allocated to mqueue? */ #endif unsigned long locked_shm; /* How many pages of mlocked shm ? */ unsigned long unix_inflight; /* How many files in flight in unix sockets */ atomic_long_t pipe_bufs; /* how many pages are allocated in pipe buffers */ /* Hash table maintenance information */ struct hlist_node uidhash_node; kuid_t uid; #if defined(CONFIG_PERF_EVENTS) || defined(CONFIG_BPF_SYSCALL) || \ defined(CONFIG_NET) || defined(CONFIG_IO_URING) atomic_long_t locked_vm; #endif #ifdef CONFIG_WATCH_QUEUE atomic_t nr_watches; /* The number of watches this user currently has */ #endif /* Miscellaneous per-user rate limit */ struct ratelimit_state ratelimit; }; extern int uids_sysfs_init(void); extern struct user_struct *find_user(kuid_t); extern struct user_struct root_user; #define INIT_USER (&root_user) /* per-UID process charging. */ extern struct user_struct * alloc_uid(kuid_t); static inline struct user_struct *get_uid(struct user_struct *u) { refcount_inc(&u->__count); return u; } extern void free_uid(struct user_struct *); #endif /* _LINUX_SCHED_USER_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 /* SPDX-License-Identifier: GPL-2.0-only */ /* * Tracing hooks * * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved. * * This file defines hook entry points called by core code where * user tracing/debugging support might need to do something. These * entry points are called tracehook_*(). Each hook declared below * has a detailed kerneldoc comment giving the context (locking et * al) from which it is called, and the meaning of its return value. * * Each function here typically has only one call site, so it is ok * to have some nontrivial tracehook_*() inlines. In all cases, the * fast path when no tracing is enabled should be very short. * * The purpose of this file and the tracehook_* layer is to consolidate * the interface that the kernel core and arch code uses to enable any * user debugging or tracing facility (such as ptrace). The interfaces * here are carefully documented so that maintainers of core and arch * code do not need to think about the implementation details of the * tracing facilities. Likewise, maintainers of the tracing code do not * need to understand all the calling core or arch code in detail, just * documented circumstances of each call, such as locking conditions. * * If the calling core code changes so that locking is different, then * it is ok to change the interface documented here. The maintainer of * core code changing should notify the maintainers of the tracing code * that they need to work out the change. * * Some tracehook_*() inlines take arguments that the current tracing * implementations might not necessarily use. These function signatures * are chosen to pass in all the information that is on hand in the * caller and might conceivably be relevant to a tracer, so that the * core code won't have to be updated when tracing adds more features. * If a call site changes so that some of those parameters are no longer * already on hand without extra work, then the tracehook_* interface * can change so there is no make-work burden on the core code. The * maintainer of core code changing should notify the maintainers of the * tracing code that they need to work out the change. */ #ifndef _LINUX_TRACEHOOK_H #define _LINUX_TRACEHOOK_H 1 #include <linux/sched.h> #include <linux/ptrace.h> #include <linux/security.h> #include <linux/task_work.h> #include <linux/memcontrol.h> #include <linux/blk-cgroup.h> struct linux_binprm; /* * ptrace report for syscall entry and exit looks identical. */ static inline int ptrace_report_syscall(struct pt_regs *regs, unsigned long message) { int ptrace = current->ptrace; if (!(ptrace & PT_PTRACED)) return 0; current->ptrace_message = message; ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); /* * this isn't the same as continuing with a signal, but it will do * for normal use. strace only continues with a signal if the * stopping signal is not SIGTRAP. -brl */ if (current->exit_code) { send_sig(current->exit_code, current, 1); current->exit_code = 0; } current->ptrace_message = 0; return fatal_signal_pending(current); } /** * tracehook_report_syscall_entry - task is about to attempt a system call * @regs: user register state of current task * * This will be called if %TIF_SYSCALL_TRACE or %TIF_SYSCALL_EMU have been set, * when the current task has just entered the kernel for a system call. * Full user register state is available here. Changing the values * in @regs can affect the system call number and arguments to be tried. * It is safe to block here, preventing the system call from beginning. * * Returns zero normally, or nonzero if the calling arch code should abort * the system call. That must prevent normal entry so no system call is * made. If @task ever returns to user mode after this, its register state * is unspecified, but should be something harmless like an %ENOSYS error * return. It should preserve enough information so that syscall_rollback() * can work (see asm-generic/syscall.h). * * Called without locks, just after entering kernel mode. */ static inline __must_check int tracehook_report_syscall_entry( struct pt_regs *regs) { return ptrace_report_syscall(regs, PTRACE_EVENTMSG_SYSCALL_ENTRY); } /** * tracehook_report_syscall_exit - task has just finished a system call * @regs: user register state of current task * @step: nonzero if simulating single-step or block-step * * This will be called if %TIF_SYSCALL_TRACE has been set, when the * current task has just finished an attempted system call. Full * user register state is available here. It is safe to block here, * preventing signals from being processed. * * If @step is nonzero, this report is also in lieu of the normal * trap that would follow the system call instruction because * user_enable_block_step() or user_enable_single_step() was used. * In this case, %TIF_SYSCALL_TRACE might not be set. * * Called without locks, just before checking for pending signals. */ static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step) { if (step) user_single_step_report(regs); else ptrace_report_syscall(regs, PTRACE_EVENTMSG_SYSCALL_EXIT); } /** * tracehook_signal_handler - signal handler setup is complete * @stepping: nonzero if debugger single-step or block-step in use * * Called by the arch code after a signal handler has been set up. * Register and stack state reflects the user handler about to run. * Signal mask changes have already been made. * * Called without locks, shortly before returning to user mode * (or handling more signals). */ static inline void tracehook_signal_handler(int stepping) { if (stepping) ptrace_notify(SIGTRAP); } /** * set_notify_resume - cause tracehook_notify_resume() to be called * @task: task that will call tracehook_notify_resume() * * Calling this arranges that @task will call tracehook_notify_resume() * before returning to user mode. If it's already running in user mode, * it will enter the kernel and call tracehook_notify_resume() soon. * If it's blocked, it will not be woken. */ static inline void set_notify_resume(struct task_struct *task) { #ifdef TIF_NOTIFY_RESUME if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME)) kick_process(task); #endif } /** * tracehook_notify_resume - report when about to return to user mode * @regs: user-mode registers of @current task * * This is called when %TIF_NOTIFY_RESUME has been set. Now we are * about to return to user mode, and the user state in @regs can be * inspected or adjusted. The caller in arch code has cleared * %TIF_NOTIFY_RESUME before the call. If the flag gets set again * asynchronously, this will be called again before we return to * user mode. * * Called without locks. */ static inline void tracehook_notify_resume(struct pt_regs *regs) { clear_thread_flag(TIF_NOTIFY_RESUME); /* * This barrier pairs with task_work_add()->set_notify_resume() after * hlist_add_head(task->task_works); */ smp_mb__after_atomic(); if (unlikely(current->task_works)) task_work_run(); #ifdef CONFIG_KEYS_REQUEST_CACHE if (unlikely(current->cached_requested_key)) { key_put(current->cached_requested_key); current->cached_requested_key = NULL; } #endif mem_cgroup_handle_over_high(); blkcg_maybe_throttle_current(); } #endif /* <linux/tracehook.h> */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * pm_wakeup.h - Power management wakeup interface * * Copyright (C) 2008 Alan Stern * Copyright (C) 2010 Rafael J. Wysocki, Novell Inc. */ #ifndef _LINUX_PM_WAKEUP_H #define _LINUX_PM_WAKEUP_H #ifndef _DEVICE_H_ # error "please don't include this file directly" #endif #include <linux/types.h> struct wake_irq; /** * struct wakeup_source - Representation of wakeup sources * * @name: Name of the wakeup source * @id: Wakeup source id * @entry: Wakeup source list entry * @lock: Wakeup source lock * @wakeirq: Optional device specific wakeirq * @timer: Wakeup timer list * @timer_expires: Wakeup timer expiration * @total_time: Total time this wakeup source has been active. * @max_time: Maximum time this wakeup source has been continuously active. * @last_time: Monotonic clock when the wakeup source's was touched last time. * @prevent_sleep_time: Total time this source has been preventing autosleep. * @event_count: Number of signaled wakeup events. * @active_count: Number of times the wakeup source was activated. * @relax_count: Number of times the wakeup source was deactivated. * @expire_count: Number of times the wakeup source's timeout has expired. * @wakeup_count: Number of times the wakeup source might abort suspend. * @dev: Struct device for sysfs statistics about the wakeup source. * @active: Status of the wakeup source. * @autosleep_enabled: Autosleep is active, so update @prevent_sleep_time. */ struct wakeup_source { const char *name; int id; struct list_head entry; spinlock_t lock; struct wake_irq *wakeirq; struct timer_list timer; unsigned long timer_expires; ktime_t total_time; ktime_t max_time; ktime_t last_time; ktime_t start_prevent_time; ktime_t prevent_sleep_time; unsigned long event_count; unsigned long active_count; unsigned long relax_count; unsigned long expire_count; unsigned long wakeup_count; struct device *dev; bool active:1; bool autosleep_enabled:1; }; #define for_each_wakeup_source(ws) \ for ((ws) = wakeup_sources_walk_start(); \ (ws); \ (ws) = wakeup_sources_walk_next((ws))) #ifdef CONFIG_PM_SLEEP /* * Changes to device_may_wakeup take effect on the next pm state change. */ static inline bool device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; } static inline bool device_may_wakeup(struct device *dev) { return dev->power.can_wakeup && !!dev->power.wakeup; } static inline void device_set_wakeup_path(struct device *dev) { dev->power.wakeup_path = true; } /* drivers/base/power/wakeup.c */ extern struct wakeup_source *wakeup_source_create(const char *name); extern void wakeup_source_destroy(struct wakeup_source *ws); extern void wakeup_source_add(struct wakeup_source *ws); extern void wakeup_source_remove(struct wakeup_source *ws); extern struct wakeup_source *wakeup_source_register(struct device *dev, const char *name); extern void wakeup_source_unregister(struct wakeup_source *ws); extern int wakeup_sources_read_lock(void); extern void wakeup_sources_read_unlock(int idx); extern struct wakeup_source *wakeup_sources_walk_start(void); extern struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws); extern int device_wakeup_enable(struct device *dev); extern int device_wakeup_disable(struct device *dev); extern void device_set_wakeup_capable(struct device *dev, bool capable); extern int device_init_wakeup(struct device *dev, bool val); extern int device_set_wakeup_enable(struct device *dev, bool enable); extern void __pm_stay_awake(struct wakeup_source *ws); extern void pm_stay_awake(struct device *dev); extern void __pm_relax(struct wakeup_source *ws); extern void pm_relax(struct device *dev); extern void pm_wakeup_ws_event(struct wakeup_source *ws, unsigned int msec, bool hard); extern void pm_wakeup_dev_event(struct device *dev, unsigned int msec, bool hard); #else /* !CONFIG_PM_SLEEP */ static inline void device_set_wakeup_capable(struct device *dev, bool capable) { dev->power.can_wakeup = capable; } static inline bool device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; } static inline struct wakeup_source *wakeup_source_create(const char *name) { return NULL; } static inline void wakeup_source_destroy(struct wakeup_source *ws) {} static inline void wakeup_source_add(struct wakeup_source *ws) {} static inline void wakeup_source_remove(struct wakeup_source *ws) {} static inline struct wakeup_source *wakeup_source_register(struct device *dev, const char *name) { return NULL; } static inline void wakeup_source_unregister(struct wakeup_source *ws) {} static inline int device_wakeup_enable(struct device *dev) { dev->power.should_wakeup = true; return 0; } static inline int device_wakeup_disable(struct device *dev) { dev->power.should_wakeup = false; return 0; } static inline int device_set_wakeup_enable(struct device *dev, bool enable) { dev->power.should_wakeup = enable; return 0; } static inline int device_init_wakeup(struct device *dev, bool val) { device_set_wakeup_capable(dev, val); device_set_wakeup_enable(dev, val); return 0; } static inline bool device_may_wakeup(struct device *dev) { return dev->power.can_wakeup && dev->power.should_wakeup; } static inline void device_set_wakeup_path(struct device *dev) {} static inline void __pm_stay_awake(struct wakeup_source *ws) {} static inline void pm_stay_awake(struct device *dev) {} static inline void __pm_relax(struct wakeup_source *ws) {} static inline void pm_relax(struct device *dev) {} static inline void pm_wakeup_ws_event(struct wakeup_source *ws, unsigned int msec, bool hard) {} static inline void pm_wakeup_dev_event(struct device *dev, unsigned int msec, bool hard) {} #endif /* !CONFIG_PM_SLEEP */ static inline void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec) { return pm_wakeup_ws_event(ws, msec, false); } static inline void pm_wakeup_event(struct device *dev, unsigned int msec) { return pm_wakeup_dev_event(dev, msec, false); } static inline void pm_wakeup_hard_event(struct device *dev) { return pm_wakeup_dev_event(dev, 0, true); } #endif /* _LINUX_PM_WAKEUP_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* Red Black Trees (C) 1999 Andrea Arcangeli <andrea@suse.de> linux/include/linux/rbtree.h To use rbtrees you'll have to implement your own insert and search cores. This will avoid us to use callbacks and to drop drammatically performances. I know it's not the cleaner way, but in C (not in C++) to get performances and genericity... See Documentation/core-api/rbtree.rst for documentation and samples. */ #ifndef _LINUX_RBTREE_H #define _LINUX_RBTREE_H #include <linux/kernel.h> #include <linux/stddef.h> #include <linux/rcupdate.h> struct rb_node { unsigned long __rb_parent_color; struct rb_node *rb_right; struct rb_node *rb_left; } __attribute__((aligned(sizeof(long)))); /* The alignment might seem pointless, but allegedly CRIS needs it */ struct rb_root { struct rb_node *rb_node; }; #define rb_parent(r) ((struct rb_node *)((r)->__rb_parent_color & ~3)) #define RB_ROOT (struct rb_root) { NULL, } #define rb_entry(ptr, type, member) container_of(ptr, type, member) #define RB_EMPTY_ROOT(root) (READ_ONCE((root)->rb_node) == NULL) /* 'empty' nodes are nodes that are known not to be inserted in an rbtree */ #define RB_EMPTY_NODE(node) \ ((node)->__rb_parent_color == (unsigned long)(node)) #define RB_CLEAR_NODE(node) \ ((node)->__rb_parent_color = (unsigned long)(node)) extern void rb_insert_color(struct rb_node *, struct rb_root *); extern void rb_erase(struct rb_node *, struct rb_root *); /* Find logical next and previous nodes in a tree */ extern struct rb_node *rb_next(const struct rb_node *); extern struct rb_node *rb_prev(const struct rb_node *); extern struct rb_node *rb_first(const struct rb_root *); extern struct rb_node *rb_last(const struct rb_root *); /* Postorder iteration - always visit the parent after its children */ extern struct rb_node *rb_first_postorder(const struct rb_root *); extern struct rb_node *rb_next_postorder(const struct rb_node *); /* Fast replacement of a single node without remove/rebalance/add/rebalance */ extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, struct rb_root *root); extern void rb_replace_node_rcu(struct rb_node *victim, struct rb_node *new, struct rb_root *root); static inline void rb_link_node(struct rb_node *node, struct rb_node *parent, struct rb_node **rb_link) { node->__rb_parent_color = (unsigned long)parent; node->rb_left = node->rb_right = NULL; *rb_link = node; } static inline void rb_link_node_rcu(struct rb_node *node, struct rb_node *parent, struct rb_node **rb_link) { node->__rb_parent_color = (unsigned long)parent; node->rb_left = node->rb_right = NULL; rcu_assign_pointer(*rb_link, node); } #define rb_entry_safe(ptr, type, member) \ ({ typeof(ptr) ____ptr = (ptr); \ ____ptr ? rb_entry(____ptr, type, member) : NULL; \ }) /** * rbtree_postorder_for_each_entry_safe - iterate in post-order over rb_root of * given type allowing the backing memory of @pos to be invalidated * * @pos: the 'type *' to use as a loop cursor. * @n: another 'type *' to use as temporary storage * @root: 'rb_root *' of the rbtree. * @field: the name of the rb_node field within 'type'. * * rbtree_postorder_for_each_entry_safe() provides a similar guarantee as * list_for_each_entry_safe() and allows the iteration to continue independent * of changes to @pos by the body of the loop. * * Note, however, that it cannot handle other modifications that re-order the * rbtree it is iterating over. This includes calling rb_erase() on @pos, as * rb_erase() may rebalance the tree, causing us to miss some nodes. */ #define rbtree_postorder_for_each_entry_safe(pos, n, root, field) \ for (pos = rb_entry_safe(rb_first_postorder(root), typeof(*pos), field); \ pos && ({ n = rb_entry_safe(rb_next_postorder(&pos->field), \ typeof(*pos), field); 1; }); \ pos = n) /* * Leftmost-cached rbtrees. * * We do not cache the rightmost node based on footprint * size vs number of potential users that could benefit * from O(1) rb_last(). Just not worth it, users that want * this feature can always implement the logic explicitly. * Furthermore, users that want to cache both pointers may * find it a bit asymmetric, but that's ok. */ struct rb_root_cached { struct rb_root rb_root; struct rb_node *rb_leftmost; }; #define RB_ROOT_CACHED (struct rb_root_cached) { {NULL, }, NULL } /* Same as rb_first(), but O(1) */ #define rb_first_cached(root) (root)->rb_leftmost static inline void rb_insert_color_cached(struct rb_node *node, struct rb_root_cached *root, bool leftmost) { if (leftmost) root->rb_leftmost = node; rb_insert_color(node, &root->rb_root); } static inline void rb_erase_cached(struct rb_node *node, struct rb_root_cached *root) { if (root->rb_leftmost == node) root->rb_leftmost = rb_next(node); rb_erase(node, &root->rb_root); } static inline void rb_replace_node_cached(struct rb_node *victim, struct rb_node *new, struct rb_root_cached *root) { if (root->rb_leftmost == victim) root->rb_leftmost = new; rb_replace_node(victim, new, &root->rb_root); } #endif /* _LINUX_RBTREE_H */
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2003-2005 Red Hat, Inc. All rights reserved. * Copyright 2003-2005 Jeff Garzik * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/driver-api/libata.rst */ #ifndef __LINUX_LIBATA_H__ #define __LINUX_LIBATA_H__ #include <linux/delay.h> #include <linux/jiffies.h> #include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/io.h> #include <linux/ata.h> #include <linux/workqueue.h> #include <scsi/scsi_host.h> #include <linux/acpi.h> #include <linux/cdrom.h> #include <linux/sched.h> #include <linux/async.h> /* * Define if arch has non-standard setup. This is a _PCI_ standard * not a legacy or ISA standard. */ #ifdef CONFIG_ATA_NONSTANDARD #include <asm/libata-portmap.h> #else #define ATA_PRIMARY_IRQ(dev) 14 #define ATA_SECONDARY_IRQ(dev) 15 #endif /* * compile-time options: to be removed as soon as all the drivers are * converted to the new debugging mechanism */ #undef ATA_DEBUG /* debugging output */ #undef ATA_VERBOSE_DEBUG /* yet more debugging output */ #undef ATA_IRQ_TRAP /* define to ack screaming irqs */ #undef ATA_NDEBUG /* define to disable quick runtime checks */ /* note: prints function name for you */ #ifdef ATA_DEBUG #define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #ifdef ATA_VERBOSE_DEBUG #define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #else #define VPRINTK(fmt, args...) #endif /* ATA_VERBOSE_DEBUG */ #else #define DPRINTK(fmt, args...) #define VPRINTK(fmt, args...) #endif /* ATA_DEBUG */ #define ata_print_version_once(dev, version) \ ({ \ static bool __print_once; \ \ if (!__print_once) { \ __print_once = true; \ ata_print_version(dev, version); \ } \ }) /* NEW: debug levels */ #define HAVE_LIBATA_MSG 1 enum { ATA_MSG_DRV = 0x0001, ATA_MSG_INFO = 0x0002, ATA_MSG_PROBE = 0x0004, ATA_MSG_WARN = 0x0008, ATA_MSG_MALLOC = 0x0010, ATA_MSG_CTL = 0x0020, ATA_MSG_INTR = 0x0040, ATA_MSG_ERR = 0x0080, }; #define ata_msg_drv(p) ((p)->msg_enable & ATA_MSG_DRV) #define ata_msg_info(p) ((p)->msg_enable & ATA_MSG_INFO) #define ata_msg_probe(p) ((p)->msg_enable & ATA_MSG_PROBE) #define ata_msg_warn(p) ((p)->msg_enable & ATA_MSG_WARN) #define ata_msg_malloc(p) ((p)->msg_enable & ATA_MSG_MALLOC) #define ata_msg_ctl(p) ((p)->msg_enable & ATA_MSG_CTL) #define ata_msg_intr(p) ((p)->msg_enable & ATA_MSG_INTR) #define ata_msg_err(p) ((p)->msg_enable & ATA_MSG_ERR) static inline u32 ata_msg_init(int dval, int default_msg_enable_bits) { if (dval < 0 || dval >= (sizeof(u32) * 8)) return default_msg_enable_bits; /* should be 0x1 - only driver info msgs */ if (!dval) return 0; return (1 << dval) - 1; } /* defines only for the constants which don't work well as enums */ #define ATA_TAG_POISON 0xfafbfcfdU enum { /* various global constants */ LIBATA_MAX_PRD = ATA_MAX_PRD / 2, LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */ ATA_DEF_QUEUE = 1, ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE, ATA_SHORT_PAUSE = 16, ATAPI_MAX_DRAIN = 16 << 10, ATA_ALL_DEVICES = (1 << ATA_MAX_DEVICES) - 1, ATA_SHT_EMULATED = 1, ATA_SHT_THIS_ID = -1, /* struct ata_taskfile flags */ ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */ ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ ATA_TFLAG_FUA = (1 << 5), /* enable FUA */ ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */ /* struct ata_device stuff */ ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */ ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */ ATA_DFLAG_NCQ = (1 << 3), /* device supports NCQ */ ATA_DFLAG_FLUSH_EXT = (1 << 4), /* do FLUSH_EXT instead of FLUSH */ ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */ ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */ ATA_DFLAG_AN = (1 << 7), /* AN configured */ ATA_DFLAG_TRUSTED = (1 << 8), /* device supports trusted send/recv */ ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */ ATA_DFLAG_CFG_MASK = (1 << 12) - 1, ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */ ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */ ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */ ATA_DFLAG_NCQ_SEND_RECV = (1 << 19), /* device supports NCQ SEND and RECV */ ATA_DFLAG_NCQ_PRIO = (1 << 20), /* device supports NCQ priority */ ATA_DFLAG_NCQ_PRIO_ENABLE = (1 << 21), /* Priority cmds sent to dev */ ATA_DFLAG_INIT_MASK = (1 << 24) - 1, ATA_DFLAG_DETACH = (1 << 24), ATA_DFLAG_DETACHED = (1 << 25), ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */ ATA_DFLAG_D_SENSE = (1 << 29), /* Descriptor sense requested */ ATA_DFLAG_ZAC = (1 << 30), /* ZAC device */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */ ATA_DEV_ATAPI = 3, /* ATAPI device */ ATA_DEV_ATAPI_UNSUP = 4, /* ATAPI device (unsupported) */ ATA_DEV_PMP = 5, /* SATA port multiplier */ ATA_DEV_PMP_UNSUP = 6, /* SATA port multiplier (unsupported) */ ATA_DEV_SEMB = 7, /* SEMB */ ATA_DEV_SEMB_UNSUP = 8, /* SEMB (unsupported) */ ATA_DEV_ZAC = 9, /* ZAC device */ ATA_DEV_ZAC_UNSUP = 10, /* ZAC device (unsupported) */ ATA_DEV_NONE = 11, /* no device */ /* struct ata_link flags */ /* NOTE: struct ata_force_param currently stores lflags in u16 */ ATA_LFLAG_NO_HRST = (1 << 1), /* avoid hardreset */ ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */ ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */ ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */ ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB, ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */ ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */ ATA_LFLAG_NO_DB_DELAY = (1 << 11), /* no debounce delay on link resume */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ /* (doesn't imply presence) */ ATA_FLAG_SATA = (1 << 1), ATA_FLAG_NO_LPM = (1 << 2), /* host not happy with LPM */ ATA_FLAG_NO_LOG_PAGE = (1 << 5), /* do not issue log page read */ ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */ ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */ ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_FPDMA_AA = (1 << 14), /* driver supports Auto-Activate */ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */ ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */ ATA_FLAG_AN = (1 << 18), /* controller supports AN */ ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */ ATA_FLAG_FPDMA_AUX = (1 << 20), /* controller supports H2DFIS aux field */ ATA_FLAG_EM = (1 << 21), /* driver supports enclosure * management */ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity * led */ ATA_FLAG_NO_DIPM = (1 << 23), /* host not happy with DIPM */ ATA_FLAG_SAS_HOST = (1 << 24), /* SAS host */ /* bits 24:31 of ap->flags are reserved for LLD specific flags */ /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */ ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */ ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ ATA_PFLAG_EXTERNAL = (1 << 22), /* eSATA/external port */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */ ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */ ATA_QCFLAG_RETRY = (1 << 7), /* retry after failure */ ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */ ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */ /* bits 24:31 of host->flags are reserved for LLD specific flags */ /* various lengths of time */ ATA_TMOUT_BOOT = 30000, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */ ATA_TMOUT_INTERNAL_QUICK = 5000, ATA_TMOUT_MAX_PARK = 30000, /* * GoVault needs 2s and iVDR disk HHD424020F7SV00 800ms. 2s * is too much without parallel probing. Use 2s if parallel * probing is available, 800ms otherwise. */ ATA_TMOUT_FF_WAIT_LONG = 2000, ATA_TMOUT_FF_WAIT = 800, /* Spec mandates to wait for ">= 2ms" before checking status * after reset. We wait 150ms, because that was the magic * delay used for ATAPI devices in Hale Landis's ATADRVR, for * the period of time between when the ATA command register is * written, and then status is checked. Because waiting for * "a while" before checking status is fine, post SRST, we * perform this magic delay here as well. * * Old drivers/ide uses the 2mS rule and then waits for ready. */ ATA_WAIT_AFTER_RESET = 150, /* If PMP is supported, we have to do follow-up SRST. As some * PMPs don't send D2H Reg FIS after hardreset, LLDs are * advised to wait only for the following duration before * doing SRST. */ ATA_TMOUT_PMP_SRST_WAIT = 5000, /* When the LPM policy is set to ATA_LPM_MAX_POWER, there might * be a spurious PHY event, so ignore the first PHY event that * occurs within 10s after the policy change. */ ATA_TMOUT_SPURIOUS_PHY = 10000, /* ATA bus states */ BUS_UNKNOWN = 0, BUS_DMA = 1, BUS_IDLE = 2, BUS_NOINTR = 3, BUS_NODATA = 4, BUS_TIMER = 5, BUS_PIO = 6, BUS_EDD = 7, BUS_IDENTIFY = 8, BUS_PACKET = 9, /* SATA port states */ PORT_UNKNOWN = 0, PORT_ENABLED = 1, PORT_DISABLED = 2, /* encoding various smaller bitmaps into a single * unsigned long bitmap */ ATA_NR_PIO_MODES = 7, ATA_NR_MWDMA_MODES = 5, ATA_NR_UDMA_MODES = 8, ATA_SHIFT_PIO = 0, ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES, ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES, ATA_SHIFT_PRIO = 6, ATA_PRIO_HIGH = 2, /* size of buffer to pad xfers ending on unaligned boundaries */ ATA_DMA_PAD_SZ = 4, /* ering size */ ATA_ERING_SIZE = 32, /* return values for ->qc_defer */ ATA_DEFER_LINK = 1, ATA_DEFER_PORT = 2, /* desc_len for ata_eh_info and context */ ATA_EH_DESC_LEN = 80, /* reset / recovery action types */ ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), /* meaningful only in ->prereset */ ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */ ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, ATA_EH_ENABLE_LINK = (1 << 3), ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK, ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET | ATA_EH_ENABLE_LINK, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */ ATA_EHI_QUIET = (1 << 3), /* be quiet */ ATA_EHI_NO_RECOVERY = (1 << 4), /* no recovery */ ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */ ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */ ATA_EHI_PRINTINFO = (1 << 18), /* print configuration info */ ATA_EHI_SETMODE = (1 << 19), /* configure transfer mode */ ATA_EHI_POST_SETMODE = (1 << 20), /* revalidating after setmode */ ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, /* mask of flags to transfer *to* the slave link */ ATA_EHI_TO_SLAVE_MASK = ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, /* max tries if error condition is still set after ->error_handler */ ATA_EH_MAX_TRIES = 5, /* sometimes resuming a link requires several retries */ ATA_LINK_RESUME_TRIES = 5, /* how hard are we gonna try to probe/recover devices */ ATA_PROBE_MAX_TRIES = 3, ATA_EH_DEV_TRIES = 3, ATA_EH_PMP_TRIES = 5, ATA_EH_PMP_LINK_TRIES = 3, SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */ /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7, /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependent */ ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */ ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */ ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */ ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */ ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */ ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands not multiple of 16 bytes */ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */ ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */ ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */ ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */ ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */ ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */ ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */ ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */ ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */ ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */ ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */ ATA_HORKAGE_NO_DMA_LOG = (1 << 23), /* don't use DMA for log read */ ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */ ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */ ATA_HORKAGE_MAX_TRIM_128M = (1 << 26), /* Limit max trim size to 128M */ ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27), /* Disable NCQ on ATI chipset */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ ATA_DMA_MASK_ATAPI = (1 << 1), /* DMA on ATAPI */ ATA_DMA_MASK_CFA = (1 << 2), /* DMA on CF Card */ /* ATAPI command types */ ATAPI_READ = 0, /* READs */ ATAPI_WRITE = 1, /* WRITEs */ ATAPI_READ_CD = 2, /* READ CD [MSF] */ ATAPI_PASS_THRU = 3, /* SAT pass-thru */ ATAPI_MISC = 4, /* the rest */ /* Timing constants */ ATA_TIMING_SETUP = (1 << 0), ATA_TIMING_ACT8B = (1 << 1), ATA_TIMING_REC8B = (1 << 2), ATA_TIMING_CYC8B = (1 << 3), ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B | ATA_TIMING_CYC8B, ATA_TIMING_ACTIVE = (1 << 4), ATA_TIMING_RECOVER = (1 << 5), ATA_TIMING_DMACK_HOLD = (1 << 6), ATA_TIMING_CYCLE = (1 << 7), ATA_TIMING_UDMA = (1 << 8), ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | ATA_TIMING_REC8B | ATA_TIMING_CYC8B | ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE | ATA_TIMING_UDMA, /* ACPI constants */ ATA_ACPI_FILTER_SETXFER = 1 << 0, ATA_ACPI_FILTER_LOCK = 1 << 1, ATA_ACPI_FILTER_DIPM = 1 << 2, ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3, /* FPDMA non-zero offset */ ATA_ACPI_FILTER_FPDMA_AA = 1 << 4, /* FPDMA auto activate */ ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER | ATA_ACPI_FILTER_LOCK | ATA_ACPI_FILTER_DIPM, }; enum ata_xfer_mask { ATA_MASK_PIO = ((1LU << ATA_NR_PIO_MODES) - 1) << ATA_SHIFT_PIO, ATA_MASK_MWDMA = ((1LU << ATA_NR_MWDMA_MODES) - 1) << ATA_SHIFT_MWDMA, ATA_MASK_UDMA = ((1LU << ATA_NR_UDMA_MODES) - 1) << ATA_SHIFT_UDMA, }; enum hsm_task_states { HSM_ST_IDLE, /* no command on going */ HSM_ST_FIRST, /* (waiting the device to) write CDB or first data block */ HSM_ST, /* (waiting the device to) transfer data */ HSM_ST_LAST, /* (waiting the device to) complete command */ HSM_ST_ERR, /* error */ }; enum ata_completion_errors { AC_ERR_OK = 0, /* no error */ AC_ERR_DEV = (1 << 0), /* device reported error */ AC_ERR_HSM = (1 << 1), /* host state machine violation */ AC_ERR_TIMEOUT = (1 << 2), /* timeout */ AC_ERR_MEDIA = (1 << 3), /* media error */ AC_ERR_ATA_BUS = (1 << 4), /* ATA bus error */ AC_ERR_HOST_BUS = (1 << 5), /* host bus error */ AC_ERR_SYSTEM = (1 << 6), /* system error */ AC_ERR_INVALID = (1 << 7), /* invalid argument */ AC_ERR_OTHER = (1 << 8), /* unknown */ AC_ERR_NODEV_HINT = (1 << 9), /* polling device detection hint */ AC_ERR_NCQ = (1 << 10), /* marker for offending NCQ qc */ }; /* * Link power management policy: If you alter this, you also need to * alter libata-scsi.c (for the ascii descriptions) */ enum ata_lpm_policy { ATA_LPM_UNKNOWN, ATA_LPM_MAX_POWER, ATA_LPM_MED_POWER, ATA_LPM_MED_POWER_WITH_DIPM, /* Med power + DIPM as win IRST does */ ATA_LPM_MIN_POWER_WITH_PARTIAL, /* Min Power + partial and slumber */ ATA_LPM_MIN_POWER, /* Min power + no partial (slumber only) */ }; enum ata_lpm_hints { ATA_LPM_EMPTY = (1 << 0), /* port empty/probing */ ATA_LPM_HIPM = (1 << 1), /* may use HIPM */ ATA_LPM_WAKE_ONLY = (1 << 2), /* only wake up link */ }; /* forward declarations */ struct scsi_device; struct ata_port_operations; struct ata_port; struct ata_link; struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); typedef int (*ata_prereset_fn_t)(struct ata_link *link, unsigned long deadline); typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes, unsigned long deadline); typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes); extern struct device_attribute dev_attr_unload_heads; #ifdef CONFIG_SATA_HOST extern struct device_attribute dev_attr_link_power_management_policy; extern struct device_attribute dev_attr_ncq_prio_enable; extern struct device_attribute dev_attr_em_message_type; extern struct device_attribute dev_attr_em_message; extern struct device_attribute dev_attr_sw_activity; #endif enum sw_activity { OFF, BLINK_ON, BLINK_OFF, }; struct ata_taskfile { unsigned long flags; /* ATA_TFLAG_xxx */ u8 protocol; /* ATA_PROT_xxx */ u8 ctl; /* control reg */ u8 hob_feature; /* additional data */ u8 hob_nsect; /* to support LBA48 */ u8 hob_lbal; u8 hob_lbam; u8 hob_lbah; u8 feature; u8 nsect; u8 lbal; u8 lbam; u8 lbah; u8 device; u8 command; /* IO operation */ u32 auxiliary; /* auxiliary field */ /* from SATA 3.1 and */ /* ATA-8 ACS-3 */ }; #ifdef CONFIG_ATA_SFF struct ata_ioports { void __iomem *cmd_addr; void __iomem *data_addr; void __iomem *error_addr; void __iomem *feature_addr; void __iomem *nsect_addr; void __iomem *lbal_addr; void __iomem *lbam_addr; void __iomem *lbah_addr; void __iomem *device_addr; void __iomem *status_addr; void __iomem *command_addr; void __iomem *altstatus_addr; void __iomem *ctl_addr; #ifdef CONFIG_ATA_BMDMA void __iomem *bmdma_addr; #endif /* CONFIG_ATA_BMDMA */ void __iomem *scr_addr; }; #endif /* CONFIG_ATA_SFF */ struct ata_host { spinlock_t lock; struct device *dev; void __iomem * const *iomap; unsigned int n_ports; unsigned int n_tags; /* nr of NCQ tags */ void *private_data; struct ata_port_operations *ops; unsigned long flags; struct kref kref; struct mutex eh_mutex; struct task_struct *eh_owner; struct ata_port *simplex_claimed; /* channel owning the DMA */ struct ata_port *ports[]; }; struct ata_queued_cmd { struct ata_port *ap; struct ata_device *dev; struct scsi_cmnd *scsicmd; void (*scsidone)(struct scsi_cmnd *); struct ata_taskfile tf; u8 cdb[ATAPI_CDB_LEN]; unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; /* libata core tag */ unsigned int hw_tag; /* driver tag */ unsigned int n_elem; unsigned int orig_n_elem; int dma_dir; unsigned int sect_size; unsigned int nbytes; unsigned int extrabytes; unsigned int curbytes; struct scatterlist sgent; struct scatterlist *sg; struct scatterlist *cursg; unsigned int cursg_ofs; unsigned int err_mask; struct ata_taskfile result_tf; ata_qc_cb_t complete_fn; void *private_data; void *lldd_task; }; struct ata_port_stats { unsigned long unhandled_irq; unsigned long idle_irq; unsigned long rw_reqbuf; }; struct ata_ering_entry { unsigned int eflags; unsigned int err_mask; u64 timestamp; }; struct ata_ering { int cursor; struct ata_ering_entry ring[ATA_ERING_SIZE]; }; struct ata_device { struct ata_link *link; unsigned int devno; /* 0 or 1 */ unsigned int horkage; /* List of broken features */ unsigned long flags; /* ATA_DFLAG_xxx */ struct scsi_device *sdev; /* attached SCSI device */ void *private_data; #ifdef CONFIG_ATA_ACPI union acpi_object *gtf_cache; unsigned int gtf_filter; #endif #ifdef CONFIG_SATA_ZPODD void *zpodd; #endif struct device tdev; /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ u64 n_native_sectors; /* native size, if ATA */ unsigned int class; /* ATA_DEV_xxx */ unsigned long unpark_deadline; u8 pio_mode; u8 dma_mode; u8 xfer_mode; unsigned int xfer_shift; /* ATA_SHIFT_xxx */ unsigned int multi_count; /* sectors count for READ/WRITE MULTIPLE */ unsigned int max_sectors; /* per-device max sectors */ unsigned int cdb_len; /* per-dev xfer mask */ unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ u16 heads; /* Number of heads */ u16 sectors; /* Number of sectors per track */ union { u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ } ____cacheline_aligned; /* DEVSLP Timing Variables from Identify Device Data Log */ u8 devslp_timing[ATA_LOG_DEVSLP_SIZE]; /* NCQ send and receive log subcommand support */ u8 ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_SIZE]; u8 ncq_non_data_cmds[ATA_LOG_NCQ_NON_DATA_SIZE]; /* ZAC zone configuration */ u32 zac_zoned_cap; u32 zac_zones_optimal_open; u32 zac_zones_optimal_nonseq; u32 zac_zones_max_open; /* error history */ int spdn_cnt; /* ering is CLEAR_END, read comment above CLEAR_END */ struct ata_ering ering; }; /* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are * cleared to zero on ata_dev_init(). */ #define ATA_DEVICE_CLEAR_BEGIN offsetof(struct ata_device, n_sectors) #define ATA_DEVICE_CLEAR_END offsetof(struct ata_device, ering) struct ata_eh_info { struct ata_device *dev; /* offending device */ u32 serror; /* SError from LLDD */ unsigned int err_mask; /* port-wide err_mask */ unsigned int action; /* ATA_EH_* action mask */ unsigned int dev_action[ATA_MAX_DEVICES]; /* dev EH action */ unsigned int flags; /* ATA_EHI_* flags */ unsigned int probe_mask; char desc[ATA_EH_DESC_LEN]; int desc_len; }; struct ata_eh_context { struct ata_eh_info i; int tries[ATA_MAX_DEVICES]; int cmd_timeout_idx[ATA_MAX_DEVICES] [ATA_EH_CMD_TIMEOUT_TABLE_SIZE]; unsigned int classes[ATA_MAX_DEVICES]; unsigned int did_probe_mask; unsigned int unloaded_mask; unsigned int saved_ncq_enabled; u8 saved_xfer_mode[ATA_MAX_DEVICES]; /* timestamp for the last reset attempt or success */ unsigned long last_reset; }; struct ata_acpi_drive { u32 pio; u32 dma; } __packed; struct ata_acpi_gtm { struct ata_acpi_drive drive[2]; u32 flags; } __packed; struct ata_link { struct ata_port *ap; int pmp; /* port multiplier port # */ struct device tdev; unsigned int active_tag; /* active tag on this link */ u32 sactive; /* active NCQ commands */ unsigned int flags; /* ATA_LFLAG_xxx */ u32 saved_scontrol; /* SControl on probe */ unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; unsigned int sata_spd; /* current SATA PHY speed */ enum ata_lpm_policy lpm_policy; /* record runtime error info, protected by host_set lock */ struct ata_eh_info eh_info; /* EH context */ struct ata_eh_context eh_context; struct ata_device device[ATA_MAX_DEVICES]; unsigned long last_lpm_change; /* when last LPM change happened */ }; #define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag) #define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0]) struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; /* Flags owned by the EH context. Only EH should touch these once the port is active */ unsigned long flags; /* ATA_FLAG_xxx */ /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int local_port_no; /* host local port num */ unsigned int port_no; /* 0 based port no. inside the host */ #ifdef CONFIG_ATA_SFF struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */ u8 ctl; /* cache of ATA control register */ u8 last_ctl; /* Cache last written value */ struct ata_link* sff_pio_task_link; /* link currently used */ struct delayed_work sff_pio_task; #ifdef CONFIG_ATA_BMDMA struct ata_bmdma_prd *bmdma_prd; /* BMDMA SG list */ dma_addr_t bmdma_prd_dma; /* and its DMA mapping */ #endif /* CONFIG_ATA_BMDMA */ #endif /* CONFIG_ATA_SFF */ unsigned int pio_mask; unsigned int mwdma_mask; unsigned int udma_mask; unsigned int cbl; /* cable type; ATA_CBL_xxx */ struct ata_queued_cmd qcmd[ATA_MAX_QUEUE + 1]; unsigned long sas_tag_allocated; /* for sas tag allocation only */ u64 qc_active; int nr_active_links; /* #links with active qcs */ unsigned int sas_last_tag; /* track next tag hw expects */ struct ata_link link; /* host default link */ struct ata_link *slave_link; /* see ata_slave_link_init() */ int nr_pmp_links; /* nr of available PMP links */ struct ata_link *pmp_link; /* array of PMP links */ struct ata_link *excl_link; /* for PMP qc exclusion */ struct ata_port_stats stats; struct ata_host *host; struct device *dev; struct device tdev; struct mutex scsi_scan_mutex; struct delayed_work hotplug_task; struct work_struct scsi_rescan_task; unsigned int hsm_task_state; u32 msg_enable; struct list_head eh_done_q; wait_queue_head_t eh_wait_q; int eh_tries; struct completion park_req_pending; pm_message_t pm_mesg; enum ata_lpm_policy target_lpm_policy; struct timer_list fastdrain_timer; unsigned long fastdrain_cnt; async_cookie_t cookie; int em_message_type; void *private_data; #ifdef CONFIG_ATA_ACPI struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif /* owned by EH */ u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; /* The following initializer overrides a method to NULL whether one of * its parent has the method defined or not. This is equivalent to * ERR_PTR(-ENOENT). Unfortunately, ERR_PTR doesn't render a constant * expression and thus can't be used as an initializer. */ #define ATA_OP_NULL (void *)(unsigned long)(-ENOENT) struct ata_port_operations { /* * Command execution */ int (*qc_defer)(struct ata_queued_cmd *qc); int (*check_atapi_dma)(struct ata_queued_cmd *qc); enum ata_completion_errors (*qc_prep)(struct ata_queued_cmd *qc); unsigned int (*qc_issue)(struct ata_queued_cmd *qc); bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); /* * Configuration and exception handling */ int (*cable_detect)(struct ata_port *ap); unsigned long (*mode_filter)(struct ata_device *dev, unsigned long xfer_mask); void (*set_piomode)(struct ata_port *ap, struct ata_device *dev); void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev); int (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev); unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id); void (*dev_config)(struct ata_device *dev); void (*freeze)(struct ata_port *ap); void (*thaw)(struct ata_port *ap); ata_prereset_fn_t prereset; ata_reset_fn_t softreset; ata_reset_fn_t hardreset; ata_postreset_fn_t postreset; ata_prereset_fn_t pmp_prereset; ata_reset_fn_t pmp_softreset; ata_reset_fn_t pmp_hardreset; ata_postreset_fn_t pmp_postreset; void (*error_handler)(struct ata_port *ap); void (*lost_interrupt)(struct ata_port *ap); void (*post_internal_cmd)(struct ata_queued_cmd *qc); void (*sched_eh)(struct ata_port *ap); void (*end_eh)(struct ata_port *ap); /* * Optional features */ int (*scr_read)(struct ata_link *link, unsigned int sc_reg, u32 *val); int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val); void (*pmp_attach)(struct ata_port *ap); void (*pmp_detach)(struct ata_port *ap); int (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy, unsigned hints); /* * Start, stop, suspend and resume */ int (*port_suspend)(struct ata_port *ap, pm_message_t mesg); int (*port_resume)(struct ata_port *ap); int (*port_start)(struct ata_port *ap); void (*port_stop)(struct ata_port *ap); void (*host_stop)(struct ata_host *host); #ifdef CONFIG_ATA_SFF /* * SFF / taskfile oriented ops */ void (*sff_dev_select)(struct ata_port *ap, unsigned int device); void (*sff_set_devctl)(struct ata_port *ap, u8 ctl); u8 (*sff_check_status)(struct ata_port *ap); u8 (*sff_check_altstatus)(struct ata_port *ap); void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf); void (*sff_tf_read)(struct ata_port *ap, struct ata_taskfile *tf); void (*sff_exec_command)(struct ata_port *ap, const struct ata_taskfile *tf); unsigned int (*sff_data_xfer)(struct ata_queued_cmd *qc, unsigned char *buf, unsigned int buflen, int rw); void (*sff_irq_on)(struct ata_port *); bool (*sff_irq_check)(struct ata_port *); void (*sff_irq_clear)(struct ata_port *); void (*sff_drain_fifo)(struct ata_queued_cmd *qc); #ifdef CONFIG_ATA_BMDMA void (*bmdma_setup)(struct ata_queued_cmd *qc); void (*bmdma_start)(struct ata_queued_cmd *qc); void (*bmdma_stop)(struct ata_queued_cmd *qc); u8 (*bmdma_status)(struct ata_port *ap); #endif /* CONFIG_ATA_BMDMA */ #endif /* CONFIG_ATA_SFF */ ssize_t (*em_show)(struct ata_port *ap, char *buf); ssize_t (*em_store)(struct ata_port *ap, const char *message, size_t size); ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf); ssize_t (*sw_activity_store)(struct ata_device *dev, enum sw_activity val); ssize_t (*transmit_led_message)(struct ata_port *ap, u32 state, ssize_t size); /* * Obsolete */ void (*phy_reset)(struct ata_port *ap); void (*eng_timeout)(struct ata_port *ap); /* * ->inherits must be the last field and all the preceding * fields must be pointers. */ const struct ata_port_operations *inherits; }; struct ata_port_info { unsigned long flags; unsigned long link_flags; unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; struct ata_port_operations *port_ops; void *private_data; }; struct ata_timing { unsigned short mode; /* ATA mode */ unsigned short setup; /* t1 */ unsigned short act8b; /* t2 for 8-bit I/O */ unsigned short rec8b; /* t2i for 8-bit I/O */ unsigned short cyc8b; /* t0 for 8-bit I/O */ unsigned short active; /* t2 or tD */ unsigned short recover; /* t2i or tK */ unsigned short dmack_hold; /* tj */ unsigned short cycle; /* t0 */ unsigned short udma; /* t2CYCTYP/2 */ }; /* * Core layer - drivers/ata/libata-core.c */ extern struct ata_port_operations ata_dummy_port_ops; extern const struct ata_port_info ata_dummy_port_info; static inline bool ata_is_atapi(u8 prot) { return prot & ATA_PROT_FLAG_ATAPI; } static inline bool ata_is_pio(u8 prot) { return prot & ATA_PROT_FLAG_PIO; } static inline bool ata_is_dma(u8 prot) { return prot & ATA_PROT_FLAG_DMA; } static inline bool ata_is_ncq(u8 prot) { return prot & ATA_PROT_FLAG_NCQ; } static inline bool ata_is_data(u8 prot) { return prot & (ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA); } static inline int is_multi_taskfile(struct ata_taskfile *tf) { return (tf->command == ATA_CMD_READ_MULTI) || (tf->command == ATA_CMD_WRITE_MULTI) || (tf->command == ATA_CMD_READ_MULTI_EXT) || (tf->command == ATA_CMD_WRITE_MULTI_EXT) || (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT); } static inline int ata_port_is_dummy(struct ata_port *ap) { return ap->ops == &ata_dummy_port_ops; } extern int ata_std_prereset(struct ata_link *link, unsigned long deadline); extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)); extern int sata_std_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); extern void ata_std_postreset(struct ata_link *link, unsigned int *classes); extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports); extern struct ata_host *ata_host_alloc_pinfo(struct device *dev, const struct ata_port_info * const * ppi, int n_ports); extern void ata_host_get(struct ata_host *host); extern void ata_host_put(struct ata_host *host); extern int ata_host_start(struct ata_host *host); extern int ata_host_register(struct ata_host *host, struct scsi_host_template *sht); extern int ata_host_activate(struct ata_host *host, int irq, irq_handler_t irq_handler, unsigned long irq_flags, struct scsi_host_template *sht); extern void ata_host_detach(struct ata_host *host); extern void ata_host_init(struct ata_host *, struct device *, struct ata_port_operations *); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, void __user *arg); #ifdef CONFIG_COMPAT #define ATA_SCSI_COMPAT_IOCTL .compat_ioctl = ata_scsi_ioctl, #else #define ATA_SCSI_COMPAT_IOCTL /* empty */ #endif extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); #if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else #define ata_scsi_dma_need_drain NULL #endif extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, unsigned int cmd, void __user *arg); extern bool ata_link_online(struct ata_link *link); extern bool ata_link_offline(struct ata_link *link); #ifdef CONFIG_PM extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host); extern void ata_sas_port_suspend(struct ata_port *ap); extern void ata_sas_port_resume(struct ata_port *ap); #else static inline void ata_sas_port_suspend(struct ata_port *ap) { } static inline void ata_sas_port_resume(struct ata_port *ap) { } #endif extern int ata_ratelimit(void); extern void ata_msleep(struct ata_port *ap, unsigned int msecs); extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, unsigned long interval, unsigned long timeout); extern int atapi_cmd_type(u8 opcode); extern unsigned long ata_pack_xfermask(unsigned long pio_mask, unsigned long mwdma_mask, unsigned long udma_mask); extern void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, unsigned long *mwdma_mask, unsigned long *udma_mask); extern u8 ata_xfer_mask2mode(unsigned long xfer_mask); extern unsigned long ata_xfer_mode2mask(u8 xfer_mode); extern int ata_xfer_mode2shift(unsigned long xfer_mode); extern const char *ata_mode_string(unsigned long xfer_mask); extern unsigned long ata_id_xfermask(const u16 *id); extern int ata_std_qc_defer(struct ata_queued_cmd *qc); extern enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc); extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); extern void ata_dev_disable(struct ata_device *adev); extern void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern unsigned int ata_do_dev_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern u64 ata_qc_get_active(struct ata_port *ap); extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd); extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev); extern int ata_scsi_slave_config(struct scsi_device *sdev); extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth); extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, int queue_depth); extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap); extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q); /* * SATA specific code - drivers/ata/libata-sata.c */ #ifdef CONFIG_SATA_HOST extern const unsigned long sata_deb_timing_normal[]; extern const unsigned long sata_deb_timing_hotplug[]; extern const unsigned long sata_deb_timing_long[]; static inline const unsigned long * sata_ehc_deb_timing(struct ata_eh_context *ehc) { if (ehc->i.flags & ATA_EHI_HOTPLUGGED) return sata_deb_timing_hotplug; else return sata_deb_timing_normal; } extern int sata_scr_valid(struct ata_link *link); extern int sata_scr_read(struct ata_link *link, int reg, u32 *val); extern int sata_scr_write(struct ata_link *link, int reg, u32 val); extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val); extern int sata_set_spd(struct ata_link *link); extern int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, unsigned long deadline, bool *online, int (*check_ready)(struct ata_link *)); extern int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline); extern void ata_eh_analyze_ncq_error(struct ata_link *link); #else static inline const unsigned long * sata_ehc_deb_timing(struct ata_eh_context *ehc) { return NULL; } static inline int sata_scr_valid(struct ata_link *link) { return 0; } static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val) { return -EOPNOTSUPP; } static inline int sata_scr_write(struct ata_link *link, int reg, u32 val) { return -EOPNOTSUPP; } static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) { return -EOPNOTSUPP; } static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; } static inline int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, unsigned long deadline, bool *online, int (*check_ready)(struct ata_link *)) { if (online) *online = false; return -EOPNOTSUPP; } static inline int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline) { return -EOPNOTSUPP; } static inline void ata_eh_analyze_ncq_error(struct ata_link *link) { } #endif extern int sata_link_debounce(struct ata_link *link, const unsigned long *params, unsigned long deadline); extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, bool spm_wakeup); extern int ata_slave_link_init(struct ata_port *ap); extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); extern void ata_sas_async_probe(struct ata_port *ap); extern int ata_sas_sync_probe(struct ata_port *ap); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap); extern void ata_sas_tport_delete(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active); extern bool sata_lpm_ignore_phy_events(struct ata_link *link); extern int sata_async_notification(struct ata_port *ap); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); extern int ata_cable_sata(struct ata_port *ap); extern int ata_cable_ignore(struct ata_port *ap); extern int ata_cable_unknown(struct ata_port *ap); /* Timing helpers */ extern unsigned int ata_pio_need_iordy(const struct ata_device *); extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle); /* PCI */ #ifdef CONFIG_PCI struct pci_dev; struct pci_bits { unsigned int reg; /* PCI config register to read */ unsigned int width; /* 1 (8 bit), 2 (16 bit), 4 (32 bit) */ unsigned long mask; unsigned long val; }; extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); extern void ata_pci_shutdown_one(struct pci_dev *pdev); extern void ata_pci_remove_one(struct pci_dev *pdev); #ifdef CONFIG_PM extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg); extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev); extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); extern int ata_pci_device_resume(struct pci_dev *pdev); #endif /* CONFIG_PM */ #endif /* CONFIG_PCI */ struct platform_device; extern int ata_platform_remove_one(struct platform_device *pdev); /* * ACPI - drivers/ata/libata-acpi.c */ #ifdef CONFIG_ATA_ACPI static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID) return &ap->__acpi_init_gtm; return NULL; } int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm); int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm); #else static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { return NULL; } static inline int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) { return -ENOSYS; } static inline int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm) { return -ENOSYS; } static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm) { return 0; } static inline int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm) { return 0; } #endif /* * EH - drivers/ata/libata-eh.c */ extern void ata_port_schedule_eh(struct ata_port *ap); extern void ata_port_wait_eh(struct ata_port *ap); extern int ata_link_abort(struct ata_link *link); extern int ata_port_abort(struct ata_port *ap); extern int ata_port_freeze(struct ata_port *ap); extern void ata_eh_freeze_port(struct ata_port *ap); extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); extern void ata_std_error_handler(struct ata_port *ap); extern void ata_std_sched_eh(struct ata_port *ap); extern void ata_std_end_eh(struct ata_port *ap); extern int ata_link_nr_enabled(struct ata_link *link); /* * Base operations to inherit from and initializers for sht * * Operations * * base : Common to all libata drivers. * sata : SATA controllers w/ native interface. * pmp : SATA controllers w/ PMP support. * sff : SFF ATA controllers w/o BMDMA support. * bmdma : SFF ATA controllers w/ BMDMA support. * * sht initializers * * BASE : Common to all libata drivers. The user must set * sg_tablesize and dma_boundary. * PIO : SFF ATA controllers w/ only PIO support. * BMDMA : SFF ATA controllers w/ BMDMA support. sg_tablesize and * dma_boundary are set to BMDMA limits. * NCQ : SATA controllers supporting NCQ. The user must set * sg_tablesize, dma_boundary and can_queue. */ extern const struct ata_port_operations ata_base_port_ops; extern const struct ata_port_operations sata_port_ops; extern struct device_attribute *ata_common_sdev_attrs[]; /* * All sht initializers (BASE, PIO, BMDMA, NCQ) must be instantiated * by the edge drivers. Because the 'module' field of sht must be the * edge driver's module reference, otherwise the driver can be unloaded * even if the scsi_device is being accessed. */ #define __ATA_BASE_SHT(drv_name) \ .module = THIS_MODULE, \ .name = drv_name, \ .ioctl = ata_scsi_ioctl, \ ATA_SCSI_COMPAT_IOCTL \ .queuecommand = ata_scsi_queuecmd, \ .dma_need_drain = ata_scsi_dma_need_drain, \ .can_queue = ATA_DEF_QUEUE, \ .tag_alloc_policy = BLK_TAG_ALLOC_RR, \ .this_id = ATA_SHT_THIS_ID, \ .emulated = ATA_SHT_EMULATED, \ .proc_name = drv_name, \ .slave_configure = ata_scsi_slave_config, \ .slave_destroy = ata_scsi_slave_destroy, \ .bios_param = ata_std_bios_param, \ .unlock_native_capacity = ata_scsi_unlock_native_capacity #define ATA_BASE_SHT(drv_name) \ __ATA_BASE_SHT(drv_name), \ .sdev_attrs = ata_common_sdev_attrs #ifdef CONFIG_SATA_HOST extern struct device_attribute *ata_ncq_sdev_attrs[]; #define ATA_NCQ_SHT(drv_name) \ __ATA_BASE_SHT(drv_name), \ .sdev_attrs = ata_ncq_sdev_attrs, \ .change_queue_depth = ata_scsi_change_queue_depth #endif /* * PMP helpers */ #ifdef CONFIG_SATA_PMP static inline bool sata_pmp_supported(struct ata_port *ap) { return ap->flags & ATA_FLAG_PMP; } static inline bool sata_pmp_attached(struct ata_port *ap) { return ap->nr_pmp_links != 0; } static inline bool ata_is_host_link(const struct ata_link *link) { return link == &link->ap->link || link == link->ap->slave_link; } #else /* CONFIG_SATA_PMP */ static inline bool sata_pmp_supported(struct ata_port *ap) { return false; } static inline bool sata_pmp_attached(struct ata_port *ap) { return false; } static inline bool ata_is_host_link(const struct ata_link *link) { return 1; } #endif /* CONFIG_SATA_PMP */ static inline int sata_srst_pmp(struct ata_link *link) { if (sata_pmp_supported(link->ap) && ata_is_host_link(link))